Search

Understanding and controlling the performance of ceria nanoparticle (CNP) catalysts requires knowledge of the detailed structure and property of CNP surfaces and any attached functional groups. Here we report thermogravimetric analysis results showing that hydrothermally synthesized ~30 nm CNPs are decorated with 12.9 hydroxyl groups per nm2 of CNP surface. Quantum mechanical calculations of the density and distribution of bound surface groups imply a scaling relationship for surface group density that balances formal charges in the functionalized CNP system. Computational results for CNPs with only hydroxyl surface groups yield a predicted density of bound hydroxyl groups for ~30 nm CNPs that is ~33% higher than measured densities. Quantitative agreement between predicted and measured hydroxyl surface densities is achieved when calculations consider CNPs with both -OH and -Ox surface groups. For this more general treatment of CNP surface functionalizations, quantum mechanical calculations predict a range of stable surface group configurations that depend on the chemical potentials of O and H, and demonstrate the potential to tune CNP surface functionalizations by varying temperature and/or partial pressures of O2 and H2O. [ABSTRACT FROM AUTHOR]

We report 301 dengue virus infections among cross-border travelers entering Yunnan Province, China, from Myanmar during 2017. Phylogenetic analysis of 99 strains found all 4 serotypes co-circulating; genetic characteristics have also changed. This finding highlights the urgent need for monitoring dengue virus cross-border transmission as early warning of severe dengue fever. [ABSTRACT FROM AUTHOR]

Background: Yunnan is not only considered the region with the most concerning human immunodeficiency virus (HIV)-1 prevalence, but is also the central hub for the spread of HIV-1 from Southeast Asia to the other provinces of China. Yunnan has the highest proportion of entry travelers who have transmitted HIV from neighbored Southeast Asian countries to mainland of China. Methods: Between 2003 and 2012, we recruited 280,961 entry travelers at land ports located in 7 bordering prefectures respectively in the Yunnan Province for HIV-1 screening. Based on the detection of HIV-1 antibody, the HIV-1 infection rate was determined. Results: Among the recruited entry travelers, 2380 were determined HIV-1 positive with infection rate of 0.85%. Travelers entering the Dehong port had the highest HIV-1 infection rate (5.12%), followed by those entering Baoshan (0.88%), Lincang (0.83%), and Honghe (0.71%). For all HIV-1 positive cases, travelers aged 21-30 and 31-40 were the most commonly infected individuals, accounting for 38.45% and 37.77% of all cases, respectively. The most common occupation of the infected population was driver (42.38%), and the proportion of industrials had increased yearly. Based on the reported risk factors, sexual transmission was the main HIV-1 infection route (77.11%) of this population. Conclusions: We have clarified the rate of HIV-1 infection among this bridge population. The characteristics of HIV-1 positive population and high geographical heterogeneity have provided the necessary epidemiological data for monitoring the HIV-1 epidemic among cross-border travelers in Yunnan and to further understand the cross-border spreading of the HIV-1 infection. [ABSTRACT FROM AUTHOR]

Background: An outbreak of dengue virus (DENV) occurred in Yunnan province. More than 2,000 individuals were infected from August to November 2013. In this study, we aimed to characterize the origin and prevalence of DENV in Dehong prefecture of Yunnan province using phylogenetic and evolutionary analyses of DENV strains collected from local patients and foreign travelers. Methods: A total of 41 DENV-positive serum samples were randomly collected from travelers who entered China at Ruili port or local patients with dengue fever in Dehong prefecture of Yunnan province, China. The envelope (E) gene of DENV was amplified and sequenced. The distributions and evolutionary characteristics of different genotypes were elucidated by phylogenetic and Bayesian analyses. Results: Phylogenetically, all of the 41 DENV-positive samples could be classified into genotype I (43.9%) of serotype DENV-1 and the Asian I genotype (56.1%) of serotype DENV-2. DENV strains derived from local patients and foreign travelers were scattered equally within these two clusters. Furthermore, the DENV strains from the two populations exhibited high relatedness based on evolutionary characteristics. Conclusions: These results suggested that imported and local DENV strains occurring during the dengue outbreak in 2013 were highly related. Additionally, these data may suggest that this dengue outbreak was caused by a newly imported infection from the neighboring country of Myanmar. [ABSTRACT FROM AUTHOR]

Different kernels cause various class discriminations owing to their different geometrical structures of the data in the feature space. In this paper, a method of kernel optimization by maximizing a measure of class separability in the empirical feature space with sparse representation-based classifier (SRC) is proposed to solve the problem of automatically choosing kernel functions and their parameters in kernel learning. The proposed method first adopts a so-called data-dependent kernel to generate an efficient kernel optimization algorithm. Then, a constrained optimization function using general gradient descent method is created to find combination coefficients varied with the input data. After that, optimized kernel PCA (KOPCA) is obtained via combination coefficients to extract features. Finally, the sparse representation-based classifier is used to perform pattern classification task. Experimental results on MSTAR SAR images show the effectiveness of the proposed method. [ABSTRACT FROM AUTHOR]

Three groups of dynamic triaxial tests were performed for saturated Nanjing fine sand subjected to uniform cyclic loading. The tested curves of the excess pore water pressure (EPWP) ratio variation with the ratio of the number of cycles are provided. The concept of the EPWP increment ratio is introduced and two new concepts of the effective dynamic shear stress ratio and the log decrement of effective stress are defined. It is found that the development of the EPWP increment ratio can be divided into three stages: descending, stable and ascending. Furthermore, at the stable and ascending stages, a satisfactory linear relationship is obtained between the accumulative EPWP increment ratio and natural logarithm of the effective dynamic shear stress ratio. Accordingly, the EPWP increment ratio at the number of cycles N has been deduced that is proportional to the log decrement of effective stress at the cycle number N-1, but is independent of the cyclic stress amplitude. Based on the analysis, a new EPWP increment model for saturated Nanjing fine sand is developed from tested data fitting, which provides a better prediction of the curves of EPWP generation, the number of cycles required for initial liquefaction and the liquefaction resistance. [ABSTRACT FROM AUTHOR]

Liquefaction of saturated loose sand is a major cause of extensive damage to buildings and infrastructures during large earthquakes. A better understanding of the behaviour of liquefied soil is becoming increasingly necessary to mitigate earthquake damage, and the fluid method has become an increasingly popular means to study the behaviour of liquefied soils. The purpose of this study is to determine the fluid characteristics of liquefied fine sand. In this paper, the apparent viscosity was measured as an index of fluid characteristics using the shaking table tests of pre-liquefaction behaviour of saturated fine sand at approximately 45 % relative density; the relationship of apparent viscosity and shear strain rate on liquefying fine sand was indicated as a power-law shear-thinning non-Newtonian fluid; and liquefying fine sand has the alternating behaviour of shear dilatancy and compressibility during cyclic loading. Additionally, a series of a monotonic axial compression loading tests in an undrained manner were performed to measure the shear stress and excess pore pressure ratio relationship on the post-liquefaction saturated fine sand at approximately 50 % relative density. The fluid characteristics of post-liquefaction fine sand exhibits rate dependence and can be described by a combined fluid model of time-independent and time-dependent power-law functions; the time-independent viscous resistance is not relevant to the excess pore pressure ratio; but the time-dependent frictional resistance is closely related to the excess pore pressure ratio. Furthermore, the results of the verification tests demonstrate that the proposed fluid model has good applicability for the fluid behaviour of the post-liquefaction fine sand. [ABSTRACT FROM AUTHOR]

Background: This study was designed to determine the Human papillomavirus (HPV) prevalence and its distribution of genotypes in various regions of Yunnan Province, China.Method: In this study, participants were recruited during routine gynecologic examination between Oct 2013 and Feb 2015. A total of 17,898 women were recruited. Polymerase chain reaction was used for detecting the HPV positive samples and HPV geno-array test was used for genotyping.Results: The overall HPV infection rate (19.9 %) among the south-western women was significantly higher (P = 0.001) than that among the north-western (18.0 %), south-eastern (13.3 %), north-eastern (11.1 %) and central women (12.9 %). The high-risk (HR) (18.1 %, P = 0.001) and single genotype (16.7 %, P = 0.001) infection rates among the South-western women were also significantly higher than those of among the north-western (13.9 %, 11.3 %), south-eastern (11.6 %, 10.5 %), north-eastern (9.6 %, 9.1 %) and central women (10.5 %, 10.0 %), respectively. While, the infections with multiple HPV (4.2 %) genotypes were significantly more common (P = 0.001) among women in north-western Yunnan than women in the south-western (1.3 %, 3.1 %), south-eastern (1.7 %, 2.7 %), north-eastern (1.5 %, 2.0 %) and central Yunnan (2.4 %, 2.9 %). A total of 30 HPV genotypes were detected; among them 13 were HR-HPV, 3 were PHR-HPV (Potential High risk), 8 were LR-HPV (Low risk) and six were unclassified. The most common HPV genotypes were HPV-52, 16, 58, 53 in control group, HPV-16, 52, 58, 39 and 53 in CINI (Cervical intraepithelial Neoplasia), HPV-52, 16, 58, 33, 53 and 81 in CINII, HPV16, 58, 18, 52, 81 in CINIII and HPV-16 18, 58, 52 in cervical cancer (CC), respectively. Such variation has also been observed about distribution of HPV genotypes distribution among single and multiple infections.Conclusion: This study gives an epidemiological estimate of HPV prevalence and different genotype distribution in various region of Yunnan province and further explains its prevalence in different neoplastic lesions. Overall HPV-16, 52, 58, and 18 are the leading HR-HPV genotypes. [ABSTRACT FROM AUTHOR]

Laboratory tests on the large post-liquefaction deformation of saturated Nanjing fine sand were performed by using a hollow cylinder apparatus. The stress-strain responses and the characteristics of excess pore water pressure after liquefaction were studied. It was found that the relationship between deviatoric stress and axial strain presented a sigmoid curve, and there was a good linearity relationship between normalized pore water pressure and deviatoric stress. On this basis, a constitutive model of stress-strain responses and a dissipation model of excess pore water pressure were established. It was found that the results predicted by the two models were in good agreement with the experimental data. The influence of relative densities and confining pressure on the characteristics of liquefied soil were studied. The results showed the relative densities and initial effective confining pressure all had an important influence on the stress-strain responses of liquefied saturated Nanjing fine sand. However, the dissipation model of excess pore water pressure after liquefaction was only affected by the confining pressure. [ABSTRACT FROM AUTHOR]