Search

Context: Early-rescue intracytoplasmic sperm injection (R-ICSI) can avoid total fertilization failure in conventional in vitro fertilization (IVF). However, the R-ICSI embryos had lower implantation rate than the direct ICSI in the fresh embryo transfer. Aims: To investigate the effect of frozen embryo transfer (FET)after R-ICSI. Methods: This was a retrospective study of the first cycle primary infertility patients with the age ≤ 35 undergoing R-ICSI and ICSI treatment. The clinical pregnancy rate, implantation rate, ectopic pregnancy, abortion rate and live birth rate were analyzed between the R-ICSI and ICSI groups in their first embryo transfer (fresh and FET cycles). Key Results: The average age of patients in fresh and frozen ET of two groups was (29.1±3.1 vs. 29.0±3.2, and 28.9±3.0 vs. 29.1±3.3), respectively (P>0.05). The R-ICSI embryos clinical pregnancy rate, implantation rate and live birth rate were lower than the ICSI embryos in fresh embryo transfer. Whereas there were no significant difference between R-ICSI and ICSI embryos in the FET cycle. Conclusions: R-ICSI embryos with frozen embryo transfer would be an optimal strategy rather than fresh embryo transfers. Implications:early R-ICSI combined with frozen embryo transfer could achieve satisfying clinical outcomes compared with fresh embryo transfers.

To determine whether glutamine consumption is associated with embryo quality and aneuploidy, a retrospective study was conducted in an in vitro fertilization center. Spent embryo culture media from patients undergoing assisted reproduction treatment and preimplantation genetic testing (PGT) were obtained on day 3 of in vitro culture. Embryo quality was assessed for cell number and fragmentation rate. PGT for aneuploidy was performed using whole genome amplification and DNA sequencing. Glutamine levels in spent embryo culture media were analyzed by gas chromatography–mass spectrometry. The results demonstrated that glutamine was a primary contributor to the classification of the good-quality and poor-quality embryos based on the orthogonal partial least-squares discriminant analysis model. Glutamine consumption in the poor-quality embryos was significantly higher than that in the good-quality embryos (P P

Background Heterogeneity of gliomas challenges the neuronavigated biopsy and oncological therapy. Diffusion and perfusion magnetic resonance imaging (MRI) can reveal the cellular and hemodynamic heterogeneity of tumors. Integrated positron emission tomography (PET)/MRI is expected to be a non-invasive imaging approach to characterizing glioma. Purpose To evaluate the value of apparent diffusion coefficient (ADC), cerebral blood volume (CBV), and spatially co-registered maximal standard uptake value (SUVmax) for tissue characterization and glioma grading. Material and Methods Thirty-seven consecutive patients with pathologically confirmed gliomas were retrospectively investigated. The relative minimum ADC (rADCmin), relative maximal ADC (rADCmax), relative maximal rCBV (rCBVmax), the relative minimum rCBV (rCBVmin), and the corresponding relative SUVmax (rSUVmax) were measured. The paired t-test was used to compare the quantitative parameters between different regions to clarify tumor heterogeneity. Imaging parameters between WHO grade IV and grade II/III gliomas were compared by t-test. The diagnostic efficiency of multiparametric PET/MRI was analyzed by receiver operating characteristic (ROC) curve. Results The values of rSUVmax were significantly different between maximal diffusion/perfusion area and minimum diffusion/perfusion area ( P min ( P max ( P = 0.002), and corresponding rSUVmax ( P = 0.001/ P max defined by rADCmin and rCBVmax were 0.89 and 0.91, respectively. Conclusion Diffusion and perfusion MRI can detect glioma heterogeneity with excellent molecular imaging correlations. Regions with rCBVmax suggest tissues with the highest metabolism and malignancy for guiding glioma grading and tissue sampling.

The morphology of a polymer brush is of great importance in determining surface properties, such as lubrication. In light of this, we systematically study the morphologies of ring polyelectrolyte b...

Rheumatoid arthritis (RA) is a heterogeneous autoimmune disorder that leads to severe joint deformities, negatively affecting the patient's quality of life. Extracellular vesicles (EVs), which include exosomes and ectosomes, act as intercellular communication mediators in several physiological and pathological processes in various diseases including RA. In contrast, EVs secreted by mesenchymal stem cells perform an immunomodulatory function and stimulate cartilage repair, showing promising therapeutic results in animal models of RA. EVs from other sources, including dendritic cells, neutrophils and myeloid-derived suppressor cells, also influence the biological function of immune and joint cells. This review describes the role of EVs in the pathogenesis of RA and presents evidence supporting future studies on the therapeutic potential of EVs from different sources. This information will contribute to a better understanding of RA development, as well as a starting point for exploring cell-free-based therapies for RA.

Objective: Vascular smooth muscle cells (VSMCs) undergo the phenotypic changes from contractile to synthetic state during vascular remodeling after ischemia. SIRT1 protects against stress-induced vascular remodeling via maintaining VSMC differentiated phenotype. However, the effect of smooth muscle SIRT1 on the functions of endothelial cells (ECs) has not been well clarified. Here, we explored the role of smooth muscle SIRT1 in endothelial angiogenesis after ischemia and the underlying mechanisms. Methods: We performed a femoral artery ligation model using VSMC specific human SIRT1 transgenic (SIRT1-Tg) and knockout (KO) mice. Angiogenesis was assessed in in vivo by quantification of the total number of capillaries, wound healing and matrigel plug assays, and in vitro ECs by tube formation, proliferation and migration assays. The interaction of HIF1α with circRNA was examined by using RNA immunoprecipitation, RNA pull-down and in situ hybridization assays. Results: The blood flow recovery was significantly attenuated in SIRT1-Tg mice, and markedly improved in SIRT1-Tg mice treated with SIRT1 inhibitor EX527 and in SIRT1-KO mice. The density of capillaries significantly decreased in the ischemic gastrocnemius of SIRT1-Tg mice compared with SIRT1-KO and WT mice, with reduced expression of VEGFA, which resulted in decreased number of arterioles. We identified that the phenotypic switching of SIRT1-Tg VSMCs was attenuated in response to hypoxia, with high levels of contractile proteins and reduced expression of the synthetic markers and NG2, compared with SIRT1-KO and WT VSMCs. Mechanistically, SIRT1-Tg VSMCs inhibited endothelial angiogenic activity induced by hypoxia via the exosome cZFP609. The cZFP609 was delivered into ECs, and detained HIF1α in the cytoplasm via its interaction with HIF1α, thereby inhibiting VEGFA expression and endothelial angiogenic functions. Meantime, the high cZFP609 expression was observed in the plasma of the patients with atherosclerotic or diabetic lower extremity peripheral artery disease, associated with reduced ankle-brachial index. Knockdown of cZFP609 improved blood flow recovery after hindlimb ischemia in SIRT1-Tg mice. Conclusions: Our findings demonstrate that SIRT1 may impair the plasticity of VSMCs. cZFP609 mediates VSMCs to reprogram endothelial functions, and serves as a valuable indicator to assess the prognosis and clinical outcomes of ischemic diseases.

Using molecular dynamics simulations, the flexible ring polyelectrolyte chains tethered to a planar substrate and immersed in good solvents are investigated systematically. Two sets of simulations are performed to explore the effects of grafting density and charge fraction, respectively. Both the monovalent and trivalent counterions are considered. The height of the brush H follows a scaling relation with grafting density (~σgν) and charge fraction (~fν). The values of the exponents are different from those of the linear counterparts. Through a careful analysis on the distributions of monomers and counterions, pair correlation functions of monomer-monomer and monomer-counterion, as well as the fractions of trivalent counterions in four states, the equilibrium structures of the ring PE brushes are examined in detail. Furthermore, a brief comparison with the ‘equivalent’ linear brush is carried out. Also, our results can serve as a guide for improving the performance of ring polyelectrolyte brushes as unique surface modifiers.

In order to fulfill the functions of comprehensive perception, real time interconnection, analysis and decision making, autonomous learning, dynamic prediction and cooperative control, an overall framework of Digital Twin Smart Mining Workface was established. Firstly, the digital twin smart mining face system was divided into 3 levels, and the functions and characteristics of each level were given. Secondly, based on the physical domain entities contained in the intelligent mining face, the data perception models of coal shearer, scraper conveyor, stage loader, crusher, hydraulic support, belt conveyor support, emulsion pump station and environment in the digital twin working face system were expounded in detail, and the collaborative constraint relationship among shearer, hydraulic support, coal flow transportation system, workface environment and equipment was analyzed in depth. Finally, the application scheme of the digital twin intelligent mining face system was designed. Based on the digital twin intelligent mining face system, the virtual real mapping and real time interaction between physical mine entities and digital mine twins could be realized, and the intelligent perception and cooperative control of digital twins could be performed, which provides a basis for improving the intelligent level of coal mining face.

Long noncoding RNAs are a group of more than 200 nt, nonprotein coding RNAs, some of which are dysregulated in many pathophysiological processes including endometriosis. This study aims to clarify the roles of dysregulated growth arrest‐specific 5 (GAS5) in patients with endometriosis, and unveil the underlying mechanisms. We obtained endometrium samples from 37 patients with endometriosis and 23 controls without endometriosis. Primary endometrial stromal cells (ESCs) and endothelial cells were separated from the endometrium. Levels of GAS5 were quantified using quantitative real‐time polymerase chain reaction, and levels of p27, cleaved caspase‐3, cleaved poly (ADP‐Ribose) polymerase 1, vascular endothelial growth factor A, tissue inhibitor of metalloproteinases 3 (TIMP3), and trypsin‐modified soy protein 10 were assessed by immunoblotting. Cell viability was examined using MTT assays, and the cell cycle and apoptosis were analyzed by flow cytometry. Endothelial cell tube formation capacity was assayed in vitro. GAS5 and p27 levels were found lower in the endometrium samples from patients with endometriosis. Primary ESCs from patients with endometriosis had increased viability, reduced apoptosis, and a relatively uncontrolled cell cycle. Gain‐ and loss‐of‐function studies confirmed that GAS5 regulated p27 expression in ESCs. Furthermore, GAS5 level was relatively low in primary endothelial cells from patients with endometriosis and GAS5 acted as an angiogenesis inhibitor by regulating the miR‐181c‐TIMP3 axis. Thus, lower GAS5 level in endometrium might be related to endometriosis by regulating cell proliferation, apoptosis, cell cycle, and angiogenesis.

In-fiber fluid instability can be harnessed to realize scalable microparticles fabrication with tunable sizes and multifunctional characteristics making it competitive in comparison to conventional microparticles fabrication methods. However, since in-fiber fluid instability has to be induced via thermal annealing and the resulting microparticles can only be collected after dissolving the fiber cladding, obtaining contamination-free particles for high-temperature incompatible materials remains great challenge. Herein, confinement-free fluid instability is demonstrated to fabricate polymeric microparticles in a facile manner induced by the ultralow surface energy of the superamphiphobic surface. The polymer solution columns break up into uniform droplets then form spherical particles spontaneously in seconds at ambient temperature. This method can be applied to a variety of polymers spanning an exceptionally wide range of sizes: from 1 mm down to 1 µm. With the aid of microfluidic spinning instrument, a large quantity of microparticles can be obtained, making this method promising for scaling up production. Notably, through simple modification of the feed solution configuration, composite/structured micromaterials can also be produced, including quantum-dots-labeled fluorescent particles, magnetic particles, core-shell particles, microcapsules, and necklace-like microfibers. This method, with general applicability and facile control, is envisioned to have great prospects in the field of polymer microprocessing.

We study the morphologies of a polyelectrolyte brush grafted onto a surface of cubic geometry under good solvent conditions in the presence of trivalent counterions, using molecular dynamics simulations. The electrostatic correlation effect and excluded volume effect on the morphologies are studied through varying the charge fraction and grafting density, respectively. Combining snapshots of surface morphologies, brush height, distribution profiles of polymer monomers, and monomer-monomer/counterion pair correlation functions, it is clearly shown that the electrostatic correlation effect, represented by the trivalent-counterion-mediated bridging effect, can induce lateral microphase separation of the cubic polyelectrolyte brush, resulting in the formation of pinned patches. These structures then lead to multi-scale ordering in the brush system and, thereby, a non-monotonic dependence of the brush height, corresponding to a collapse-to-swell transition, on the grafting density. Our simulation results demonstrate that, with the sequence of surface morphologies responsive to adjusting external parameters, the cubic polyelectrolyte brush can serve as a candidate system for the manufacturing of smart stimuli-responsive materials.

We examine the Casimir effect for free statistical field theories which have Hamiltonians with second order derivative terms. Examples of such Hamiltonians arise from models of non-local electrostatics, membranes with non-zero bending rigidities and field theories of the Brazovskii type that arise for polymer systems. The presence of a second derivative term means that new types of boundary conditions can be imposed, leading to a richer phenomenology of interaction phenomena. In addition zero modes can be generated that are not present in standard first derivative models, and it is these zero modes which give rise to long range Casimir forces. Two physically distinct cases are considered: (i) unconfined fields, usually considered for finite size embedded inclusions in an infinite fluctuating medium, here in a two plate geometry the fluctuating field exists both inside and outside the plates, (ii) confined fields, where the field is absent outside the slab confined between the two plates. We show how these two physically distinct cases are mathematically related and discuss a wide range of commonly applied boundary conditions. We concentrate our analysis to the critical region where the underlying bulk Hamiltonian has zero modes and show that very exotic Casimir forces can arise, characterised by very long range effects and oscillatory behavior that can lead to strong metastability in the system., Comment: 18 pages, 6 figures

We study surface morphologies of a spherical polyelectrolyte brush in the presence of trivalent counterions using molecular dynamics simulations. Solvent quality and electrostatic interaction strength are varied to generate a series of structures. Through a careful analysis on snapshots of morphologies, shape factor of tethered chains, and monomer–monomer pair correlation function we find a nonmonotonic dependence of surface morphology on electrostatic strength, which represents clearly the electrostatic correlation effect mediated by the multivalent counterions. Due to the very importance of counterions, we further study the correlation effect by classifying counterions into four states, calculating the monomer–counterion pair correlation function and diffusion coefficient of counterions. Our simulation results clearly demonstrate that ordered patterns can be induced by the electrostatic correlation effect in the presence of trivalent counterions, which is absent in the system with monovalent ions. Also,...

Two new iron(II) complexes with 1D chain and 2D network structures have been successfully synthesized and characterized. One of the complexes exhibits a pressure-induced spin-crossover property with a reversible color change from white to purple at room temperature. The special property makes it a suitable candidate as a pressure sensor.

Objective— Smooth muscle (SM) 22α, an actin-binding protein, displays an upregulated expression as a marker during cellular senescence. However, the causal relationship between SM22α and senescence is poorly understood. This study aimed to investigate the role of SM22α in angiotensin II (Ang II)–induced senescence of vascular smooth muscle cells (VSMCs). Approach and Results— We prepared a model of VSMC senescence induced by Ang II and found that the expression of SM22α in VSMCs was increased in response to chronic Ang II treatment. Overexpression of SM22α promoted Ang II–induced VSMC senescence, whereas knockdown of SM22α suppressed this process. Moreover, this effect of SM22α was p53 dependent. Increased SM22α protein obstructed ubiquitination and degradation of p53 and subsequently improved its stability. Furthermore, SM22α inhibited phosphorylation of Mdm2 (mouse double minute 2 homolog), an E3 ubiquitin-protein ligase, accompanied by a decreased interaction between Mdm2 and p53. Using LY294002, a PI3K/Akt inhibitor, we found that PI3K/Akt-mediated Mdm2 phosphorylation and activation was inhibited in senescent or SM22α-overexpressed VSMCs, in parallel with decreased p53 ubiquitination. We further found that SM22α inhibited activation of PI3K/Akt/Mdm2 pathway via strengthening actin cytoskeleton. In the in vivo study, we showed that the disruption of SM22α reduced the increase of blood pressure induced by Ang II, associated with decreased VSMC senescence through a mechanism similar to that in VSMCs in vitro. Conclusions— In conclusion, these findings suggest that the accumulation of SM22α promotes Ang II–induced senescence via the suppression of Mdm2-mediated ubiquitination and degradation of p53 in VSMCs in vitro and in vivo.

Aims Sirtuin 1 (SIRT1) inhibits nuclear factor kappa B (NF-κB) activity in response to the inflammatory cytokine tumour necrosis factor alpha (TNF-α). Smooth muscle (SM) 22α is a phosphorylation-regulated suppressor of IKK-IκBα-NF-κB signalling cascades in vascular smooth muscle cells (VSMCs). Sm22α knockout results in increased expression of pro-inflammatory genes in the aortas which are controlled by NF-κB. This study aimed to investigate the relationship between SM22α and SIRT1 in the control of vascular inflammation. Methods and results The ligation injury model of Sirt1-Tg/Sm22α-/- mice displayed an increased level of the inflammatory molecules in the carotid arteries compared with Sirt1-Tg mice, accompanied with aggravating neointimal hyperplasia. In the in vitro study, on the one hand, we showed that TNF-α induced the epigenetic silencing of SM22α transcription via EZH2-mediated H3K27 methylation in the SM22α promoter region, contributing to inflammatory response. On the other hand, TNF-α simultaneously induced SIRT1 phosphorylation via CKII and thereby protected against inflammation. Phosphorylated SIRT1 interacted with and deacetylated EZH2 and, subsequently, promoted SM22α transcription by inhibiting EZH2 activity. Increased SM22α in turn facilitated the phosphorylation and activation of SIRT1 via recruitment of CKII to SIRT1, which amplified the anti-inflammatory effect of SIRT1. Conclusion Our findings demonstrate that, in response to TNF-α stimulation, CKII-SIRT1-SM22α acts in a loop to reinforce the expression of SM22α, which limits the inflammatory response in VSMCs in vivo and in vitro. The anti-inflammatory effect of SIRT1 may be dependent on SM22α to some extent. Our data point to targeted activation of SIRT1 in VSMCs as a promising therapeutic avenue in preventing cardiovascular diseases.

Formulating an analytical theory, we study phase separation of a polyelectrolyte solution under poor solvent condition confined in three types of finite geometric spaces: slab, cylinder, and sphere. Divided by a Lifshitz line, bulk polyelectrolyte solution undergoes either micro- or macro-phase separation. Confinement effects for both scenarios are studied. Composition fluctuations inducing phase separation are classified in terms of eigenmodes of the inverse structure factor operator in the corresponding geometric spaces. Tracking each eigenmode, the instability lines under confinement effects are derived in closed forms. For the confined microphase separation, we find a decaying oscillatory dependence of the spinodal point on the confinement size, which represents the commensurability between the finite period of the soft mode and the confining boundary size. For the confined macrophase separation, a typical mean-field finite size scaling of the Ising universality class is observed under the strong screening condition.

We consider Euclidean path integrals with higher derivative actions, including those that depend quadratically on acceleration, velocity and position. Such path integrals arise naturally in the study of stiff polymers, membranes with bending rigidity as well as a number of models for electrolytes. The approach used is based on the relation between quadratic path integrals and Gaussian fields and we also show how it can be extended to the evaluation of even higher order path integrals., Revtex 12 pages

Diffusion dynamics of charged nanoparticles on the lipid membrane is of essential importance to cellular functioning. Yet a fundamental insight into electrostatics-mediated diffusion dynamics of charged nanoparticles on the membrane is lacking and remains to be an urgent issue. Here we present the computational investigation to uncover the pivotal role of electrostatics in the diffusion dynamics of charged nanoparticles on the lipid membrane. Our results demonstrate diffusive behaviors and directional transport of a charged nanoparticle, significantly depending on the sign and spatial distribution of charges on its surface. In contrast to the Fickian diffusion of neutral nanoparticles, randomly charged nanoparticles undergo superdiffusive transport with directionality. However, the dynamics of uniformly charged nanoparticles favors Fickian diffusion that is significantly enhanced. Such observations can be explained in term of electrostatics-induced surface reconstruction and fluctuation of lipid membrane. We finally present an analytical model connecting surface reconstruction and local deformation of the membrane. Our findings bear wide implications for the understanding and control of the transport of charged nanoparticles on the cell membrane.

Purpose In an integrated circuit (IC) substrate, more fillers, including talcum powder and aluminium hydroxide, are added, which leads to much higher rigidity and hardness compared with a traditional printed circuit board. However, the micro drilling of IC substrates is harder. This paper aims to test the drilling process of IC substrates to improve the drilling process and the micro hole quality. Design/methodology/approach Substrate drilling by a micro drill with 0.11-mm diameter was used under several drilling conditions. The influence of drilling conditions on the drilling process was observed. Drilling forces, drill wear and micro hole quality were also studied. Findings The deformation circle around holes, hole location accuracy, bugle hole and burrs were the major defects of micro holes that were observed during the drilling of the substrate. Reducing the drilling force and drill wear was the effective way to improve hole quality. Originality/value The technology and manufacturing of IC substrates has been little investigated. Research data on drilling IC substrates is lacking. The micro hole quality directly affects the reliability of IC substrates. Thus, improving the drilling technology of IC substrates is very important.

The ability to understand and exploit entropic contributions to ordering transition is of essential importance in the design of self-assembling systems with well-controlled structures. However, much less is known about the role of assembly kinetics in entropy-driven phase behaviors. Here, by combining computer simulations and theoretical analysis, we report that the implementation of entropy in driving phase transition significantly depends on the kinetic process in the reaction-induced self-assembly of newly designed nanoparticle systems. In particular, such systems comprise binary Janus nanoparticles at the fluid-fluid interface and undergo phase transition driven by entropy and controlled by the polymerization reaction initiated from the surfaces of just one component of nanoparticles. Our simulations demonstrate that the competition between the reaction rate and the diffusive dynamics of nanoparticles governs the implementation of entropy in driving the phase transition from randomly mixed phase to intercalated phase in these interfacial nanoparticle mixtures, which thereby results in diverse kinetic pathways. At low reaction rates, the transition exhibits abrupt jump in the mixing parameter, in a similar way to first-order, equilibrium phase transition. Increasing the reaction rate diminishes the jumps until the transitions become continuous, behaving as a second-order-like phase transition, where a critical exponent, characterizing the transition, can be identified. We finally develop an analytical model of the blob theory of polymer chains to complement the simulation results and reveal essential scaling laws of the entropy-driven phase behaviors. In effect, our results allow for further opportunities to amplify the entropic contributions to the materials design via kinetic control.

We investigate several structural properties of low-molecular weight AB diblock copolymer melts, focusing on a number of features that substantially deviate from those of high-molecular weight copolymer melts. The study is based on the wormlike chain formalism aided by random phase approximation and self-consistent field theory. We examine the effects that stemmed from both the finite molecular weight and the finite interaction range between unlike AB monomers. The latter yields profound effects on systems consisting of short wormlike block copolymers. The noticeable shift of the order-disorder transition point is discussed. Attention is also paid to the strong-segregation regime, where low molecular weight polymers are subject to finite stretchability.

OBJECTIVE To determine whether anxiety and depression are associated with greater respiratory discomfort in asthma. METHODS Adults with asthma (n = 230) underwent methacholine (Mch) challenge. Anxiety and depression, asthma control, and quality of life were evaluated at study entry by using the Hospital Anxiety and Depression Scale, Asthma Control Test, and Asthma Quality of Life Questionnaire, respectively. Qualitative descriptors of breathlessness, dyspnea intensity (modified Borg scale and visual analog scale [VAS]), and other respiratory symptoms were evaluated before and after Mch challenge. RESULTS Patients were classified as neither anxiety nor depression (NAD), anxiety only, depression only (D), or both anxiety and depression (AD) according to the Hospital Anxiety and Depression Scale score. Asthma Control Test and Asthma Control Test, and Asthma Quality of Life Questionnaire scores were lowest in the AD group (both p < 0.001). VAS scores for dyspnea and wheezing before Mch challenge were highest in the AD group (both p < 0.05). The increase in the modified Borg scale score after Mch challenge was higher in the AD group (mean [standard deviation] 2.5 ± 2.0) than in the NAD (1.5 ± 1.5) and D (0.8 ± 0.9) groups (p = 0.006 and p = 0.003, respectively). Most descriptors of breathlessness were more prevalent in the anxiety only, D, and AD groups than in the NAD group. Multivariable logistic regression models indicated that anxiety increased the risk of dyspnea (odds ratio 1.10, p < 0.001 for the Borg score; odds ratio 3.84, p = 0.032 for the VAS score) but not for other respiratory symptoms. CONCLUSIONS Anxiety but not depression was associated with greater perceived dyspnea intensity but not other measures of respiratory discomfort in individuals with asthma. Anxiety may shape the quality and intensity of dyspnea at a given respiratory load.

Polymers are found near surfaces and interfaces in a wide range of chemical and biological systems, and the structure and dynamics of adsorbed polymer chains have been the subject of intense interest for decades. While polymer structure is often inferred from dynamic measurements in bulk solution, this approach has proven difficult to implement at interfaces, and the understanding of interfacial polymer conformation remains elusive. Here we used single-molecule tracking to study the interfacial diffusion of isolated poly(ethylene glycol) molecules at oil-water interfaces. Compared to diffusion in dilute aqueous solution, which exhibited the expected dependence of the diffusion coefficient (D) upon molecular weight (M) of D ∼ M(-1/2) for a Gaussian chain, the behavior at the interface was approximately D ∼ M(-2/3), suggesting a significantly more expanded polymer conformation, despite the fact that the oil was a poor solvent for the polymer. Interestingly, this scaling remained virtually unchanged over a wide range of oil viscosity, despite the fact that at low viscosities the magnitude of the diffusion coefficient was consistent with expectations based on viscous drag (i.e., Stokes-Einstein diffusion), and for high viscosity oil, the interfacial mobility was much faster than expected and consistent with the type of intermittent hopping transport observed at the solid-liquid interface. The dependence on molecular weight, in both regimes, was consistent with results from both self-consistent field theory and previous Monte Carlo simulations, suggesting that an adsorbed polymer chain adopted a partially swollen (loop-train-tail) interfacial conformation.