94 results on '"Biletskyi, V."'
Search Results
2. Effect of hydrogen on the electrical resistance of NbSe2 in a wide temperature range
- Author
-
Chroneos, A., Khadzhai, G. Ya., Biletskyi, V. I., Kislitsa, M. V., and Vovk, R. V.
- Published
- 2021
- Full Text
- View/download PDF
3. Oil agglomeration in new combined technologies
- Author
-
Biletskyi, V. S., primary, Samilye, B. N., additional, and Kheloufi, A., additional
- Published
- 2020
- Full Text
- View/download PDF
4. Enhanced oxygen diffusion in nano-structured ceria
- Author
-
Boyko, Yu. I., Biletskyi, V. I., Bogdanov, V. V., Vovk, R. V., Khadzhai, G. Ya., Goulatis, I. L., and Chroneos, A.
- Published
- 2018
- Full Text
- View/download PDF
5. Effect of pressure on the scattering of electrons by phonons in niobium triselenide at low temperatures
- Author
-
Biletskyi, V. I., primary, Khadzhai, G. Ya., additional, Kislitsa, M. V., additional, Nazyrov, Z. F., additional, and Vovk, R. V., additional
- Published
- 2023
- Full Text
- View/download PDF
6. DIFFERENTIATION OF LEGAL REGULATION OF SOCIAL AND LEGAL PROTECTION OF OPERATIVES AND PERSONS PROVIDING ASSISTANCE TO OPERATIONAL UNITS
- Author
-
Khalymon, S., primary, Filippov, S., additional, Mota, A., additional, Bomberher, I., additional, and Biletskyi, V., additional
- Published
- 2023
- Full Text
- View/download PDF
7. Optimization Principles Implementation in the Innovative Technologies for Re-used Extraction Workings Maintenance
- Author
-
Bondarenko, V. I., Kovalevska, I. A., Biletskyi, V. S., and Desna, N. A.
- Subjects
combined roof-bolting systems ,fastening structures ,mechanism of the geomechanical deformation ,geomechanical factors ,geomechanical index - Abstract
This paper studies the main approaches to optimization principles implementation in innovative technologies for reused mine workings. Based on the experimental data processing and using the correlation analysis methods, the possibility of achieving the correspondence of the deformation-strength characteristics of the fastening structures to the optimal values of loads and displacement, at which the intensity of rock pressure manifestations is minimal, has been proved. A series of multivariate computational experiments with various mining-and-geological and mining-engineering factors have been conducted to determine the characteristics of the fastening structures in the conditions of the Western Donbass coal mines (Ukraine). Based on the comparative analysis of the experiment and analytical calculations, it is possible to represent recommendations for the use of the combined roof-bolting systems in difficult mining-and-geological conditions when maintaining reused extraction coal-mine workings.
- Published
- 2022
8. Specifying the Methods to Calculate Thermal Efficiency of a Dual Production Well System 'Fluid-Geoheat'
- Author
-
Fyk, M. I., Biletskyi, V. S., Abbood, M., and Desna, N. A.
- Subjects
mechanocaloric effect ,thermal diffusion ,geothermal energy production ,hydrocarbon well ,thermal efficiency of a system - Abstract
Methods to calculate thermal efficiency of dual production well system “fluid-geoheat” have been specified for conditionally thin productive fluid-saturated seam in terms of radial planar filtration. It has been demonstrated that relative to a variant, ignoring Joule-Thompson effect, and variant of discrete Joule–Thomson coefficient substitution, calculation accuracy as for the well heat efficiency increases by 33% and 9% respectively. It has been proved that it is expedient for a conditionally thin seam to use effective temperature within the heat-exchange equitation with Fourier substitution as related to heat transfer while considering heat input in terms of unidirectional input to a virtual disk plate from the seam floor. In the context of the proposed calculation methods, increase in numerical estimations of thermal efficiency of a well results from the consideration of extra heat pumping owing to Joule-Thompson effect by rocks adjoining the productive formation.
- Published
- 2022
9. First metals discovery and development the sacral component phenomenon
- Author
-
Haiko, H, primary and Biletskyi, V, additional
- Published
- 2015
- Full Text
- View/download PDF
10. Моделювання тампонажного каменю на цементно-зольній основі
- Author
-
Orlovskyi, V. M., primary, Biletskyi, V. S., additional, and Melezhyk, A. V., additional
- Published
- 2021
- Full Text
- View/download PDF
11. Heat-Resistant Backfill Materials, Expanding During Hardening
- Author
-
Orlovskyi, V. M., Biletskyi, V. S., Desna, N. A., and Ponomarenko, N. V.
- Subjects
density ,cement stone expansion ,heat resistance ,backfill material ,cements stone strength ,gas per-meability - Abstract
The article analyzes the problem of improving the quality of demarcation of rocks, oil as well as gas horizons. The results of theoretical and experimental researches of the backfill materials expanding at hardening on the basis of ash mixes are stated. Clinker heat-resistant autoclave hardening backfill materials that expand during hardening, with high performance properties on the basis of man-made by-products of industry have been developed and studied. The selection of optimal formulations of new heat-resistant backfill materials of autoclave hardening, which expand during hardening, is carried out. The results of the work have practical application in the cementation of oil and gas wells in complex mining and geological conditions in exploration areas and industrial fields of oil and natural gas as well as gas condensate.
- Published
- 2021
12. A methodology for calculating the productivity of a hydrocarbon-geothermal well
- Author
-
Mykhailo Fyk, Biletskyi, V. S., and Desna, N. A.
- Subjects
Physics::Fluid Dynamics ,hydrocarbon-geothermal wel ,flow rate ,non-isothermal lifting mode ,fluid - Abstract
The article deals with the development of a refined methodology for calculating the production rate of a hydrocarbon-geothermal well under a non-isothermal lifting mode. The proposed methodology compares favourably with the basic one by taking into account the mutual influence of pressure head losses and those of thermal energy. This problem was solved by taking into consideration the convective component of heat exchange in a vertical (inclined) pipe when assessing hydraulic pressure head losses due to viscous friction. The methodology was tested for the conditions of Kotelev gas condensate field. The discrepancy between the values calculated according to the basic and the proposed methodologies for the heat flow rate constitute 4-7 % on average, while for the fluid flow rate the discrepancy averages 2.5-8.5 %. The possibility was proved of optimizing the dual mode of operation of a hydrocarbon-geothermal well in terms of the combined thermal energy being produced and the caloric heat energy of the gas condensate combustion.
- Published
- 2021
13. Coal technologies with good prospects
- Author
-
Biletskyi, V. S. and Shendrik, T. G.
- Subjects
agglomeration ,hydrotransport ,coal technologies ,rational conditions ,industrial testing - Published
- 2021
14. Фізико-хімічні особливості гідратації обважнених термостійких тампонажних матеріалів
- Author
-
Orlovskyy, V. M., Malovanyy, M. S., Biletskyi, V. S., and Sokur, M. I.
- Subjects
plugging material ,cement stone ,fly ash ,цементування свердловин ,water-mixture ratio ,зола виносу ,цементний камінь ,cement hydration ,водосумішеве відношення ,кінетичні криві ,oil-well cementing - Abstract
A new competitive class of plugging compositions (weighted non-shrink plugging materials) has been created using as components a fly ash from thermal power station, a weighting additive and a superplasticizer. X-ray phase analysis identified the composition of new materials formed in the hydration process of the developed plugging compositions. The kinetic curves of the plugging material expansion in a wide temperature range have been obtained. Rational temperature regimes of plugging materials hardening according to the criteria of strength and gas permeability of cement stone have been determined. Створено новий конкурентоздатний клас тампонажних композицій (обважнені безусадкові тампонажні матеріали) із використанням як компонентів золи виносу ТЕС, обважнювача і суперпластифікатора. Рентгенофазовим аналізом тампонажного каменю ідентифіковано склад новоутворень в процесі гідратації розроблених тампонажних композицій. Отримано кінетичні криві розширення тампонажного матеріалу в широкому температурному інтервалі. Визначено раціональні температурні режими тужавіння тампонажних композицій за критеріями міцності і газопроникності цементного каменю.
- Published
- 2021
15. Technological scheme of the combined geothermalhydrocarbon system for the production and storage of energy resources
- Author
-
Fyk, M. I., Biletskyi, V. S., Abbood, M. H., and Fyk, O. I.
- Abstract
The complex researches of schemes of extraction and storage of hydrocarbons and geothermal energy are executed in the work. In particular, according to the location, logistics and nature of the processes of generation, transportation, evacuation, injection and local utilization of hydrocarbon and geothermal energy sources, the scheme is divided into subspecies of consumer regional order of electricity, hydrocarbon and chemical energy and hydrogen. It is shown that the tasks of extraction of natural or synthesized hydrocarbons, geothermal energy and subsequent transformation into the required form of commodity resource can be unified with the organization of circuit-combined technologies. At the same time, the developed technological scheme implements the concept of storage of the required amount of energy resources on the one hand and regulation of production capacity for consumption – on the other. The reduction of current energy costs for the implementation and operation of systems with updated functional systems for a total of 20-45%. It is proved that the selection of the scheme of unified extraction and storage energy systems in accordance with the projected order of energy and energy resources, due to the capabilities of productive reservoirs, leads to minimization of capital costs for their construction on a modular basis. Research of application of combined technologies of dual extraction-storage of heat carriers-hydrocarbons is a perspective direction of researches.
- Published
- 2021
16. Математичне моделювання процесів тепломасообміну при розкладенні газових гідратів у пористому середовищі
- Author
-
Dreus, A. Yu., Bondarenko, V. I., Biletskyi, V. S., and Lysenko, R. S.
- Subjects
розкладення газових гідратів ,hydrate dissociation ,дисоціація гідрату ,падіння тиску ,heat exchange process ,endothermal reaction ,ендотермічна реакція ,gas hydrates dissociation ,pressure drop ,процеси теплообміну - Abstract
Purpose. The development of methodology of research and analysis of heat and mass exchange processes in a hydrate containing porous rock layer in case of a pressure drop at its boundary. Methodology. Mathematical simulation, computational experiment findings. The mathematical simulation of thermophysical processes during the dissociation of gas hydrate in a porous rock layer is presented. The case of gas hydrate dissociation in a porous rock layer, which exists in a stable state under the influence of relatively high initial temperature and pressure factors, is investigated. Numerical studies on the temperature and pressure patterns during the gas hydrate dissociation are performed. The nonstationary distribution of temperature and pressure along a porous rock layer during the dissociation of gas hydrate due to pressure drop at its boundary is presented. The advancement rate of the gas hydrate dissociation front and the change in the size of the dissociated gas hydrate area over the time are determined. originality. The algorithm is proposed for calculating the pressure and temperature fields in a porous rock layer in the case when the temperature of the stable gas hydrate is higher than its dissociation temperature. The factor that ensures the dissociation of gas hydrate is the pressure drop at the rock layer boundary. The effect of the endothermal reaction of gas hydrate dissociation on the heat exchange processes in the porous rock layer is presented. It is shown that the temperature and pressure values determining the gas hydrate dissociation point are changed as the front of the phase transition advances. Practical value. The proposed mathematical model and calculation algorithm can be used to predict the time characteristics and sizes of the gas hydrate dissociation zones around production wells. Мета. Розробка методики дослідження та аналіз процесів тепломасообміну в гідратовміщуючому пористому шарі при падінні тиску на його границі. Методика. Математичне моделювання, обчислювальний експеримент. Результати. Представлена математична модель теплофізичних процесів при розкладенні газового гідрату в пористому шарі гірської породи. Досліджено випадок розкладення газового гідрату в пористому шарі гірської породи, що знаходиться у стабільному стані при відносно високих початкових показниках температурі й тиску. Виконані чисельні дослідження полів температури й тиску при розкладенні газового гідрату. Представлено нестаціонарний розподіл температури й тиску вздовж пористого пласта при розкладенні газового гідрату внаслідок падіння тиску на його границі. Визначена швидкість просування фронту розкладення газового гідрату та зміна розмірів області розкладеного газового гідрату переходу у часі. Наукова новизна. Запропоновано алгоритм розрахунку полів тиску й температури в пористому шарі у випадку, коли температура стабільного газового гідрату вище значення температури його дисоціації. Фактором, що забезпечує процес розкладення газового гідрату, є падіння тиску на границі породного шару. Показано вплив ендотермічної реакції дисоціації газового гідрату на процеси теплообміну в пористому шарі. Показано, що значення температури й тиску, які визначають точку розкладення газового гідрату, змінюються в міру просування фронту фазового переходу. Практична значимість. Запропоновані математична модель та алгоритм розрахунку можуть бути використані для прогнозування часових характеристик і розмірів зон розкладення газових гідратів навколо експлуатаційних свердловин.
- Published
- 2020
17. The study of the lining layer abrasing wear in the semiautogenous grinding mill
- Author
-
Sokur, M., Biletskyi, V. S., Fyk, M., Fyk, O., and Zaselskiy, I.
- Subjects
abrasing wear ,steel 110G13L ,self-grinding mills ,mathematical models ,stressed state ,lining plates - Abstract
In this work complex investigations of the abrasing wear of lining of self-grinding mills (semiautogenous grinding mills) are carried out with the obtaining of mathematical models of wear-abrasing of elevators in terms of height, weight, volume and worn-out area. In particular, according to the location and nature of the abrasing wear processes, the liner-lifters mill self-grinding are identified in three typical groups. During 1 year, in the conditions of Ingulets GOK, the monitoring of the abrasing wear of selected groups of lifters of self-grinding mills was performed. On the basis of the experimental data calculationed in the Microsoft Office Excel program, a set of mathematical models of lifter abrasing wear was obtained in terms of height, weight, volume and worn-out area. The obtained dependencies are recommended for prediction of abrasing wear of lining and necessary frequency of replacement of inserts-lifters. In addition, the research of wear of lining made of cast iron RF–4, showed a significant reduction in their abrasing wear compared with steel 110G13L. Thus, it has been shown that the selection of liner-lifters materials can reduce the inter–repair period by 3 times or more (replacement of worn-out lifters). A comparison of the actual picture of the abrasing wear of elevators and Simulation Statics simulated result (using SolidWorks) stresses shows the convergence of the arrangement of the zones of maximum stresses and the maximum abrasing wear of the lining. Investigation of the influence of the stressed state of lining plates on the intensity of their abrasing wear – a promising direction for further research.
- Published
- 2020
18. Optimization Principles Implementation in the Innovative Technologies for Reused Extraction Workings Maintenance.
- Author
-
Bondarenko, V. I., Kovalevska, I. A., Biletskyi, V. S., and Desna, N. A.
- Subjects
TECHNOLOGICAL innovations ,COAL mining ,ELECTRONIC data processing ,STATISTICAL correlation ,FASTENERS - Abstract
This paper studies the main approaches to optimization principles implementation in innovative technologies for reused mine workings. Based on the experimental data processing and using the correlation analysis methods, the possibility of achieving the correspondence of the deformation strength characteristics of the fastening structures to the optimal values of loads and displacement, at which the intensity of rock pressure manifestations is minimal, has been proved. A series of multivariate computational experiments with various mining-and-geological and mining-engineering factors have been conducted to determine the characteristics of the fastening structures in the conditions of the Western Donbass coal mines (Ukraine). Based on the comparative analysis of the experiment and analytical calculations, it is possible to represent recommendations for the use of the combined roof-bolting systems in difficult mining-and-geological conditions when maintaining reused extraction coal-mine workings. [ABSTRACT FROM AUTHOR]
- Published
- 2022
19. The effect of the chaotic pinning potential on intrinsic pinning in YBa2Cu3O7−δ single crystals
- Author
-
Vovk, N. R., primary, Vovk, R. V., additional, Khadzhai, G. Ya., additional, Biletskyi, V. I., additional, Samoylov, A. V., additional, Solovyov, A. L., additional, and Matsepulin, A. V., additional
- Published
- 2020
- Full Text
- View/download PDF
20. Mathematical simulation of heat and mass exchange processes during dissociation of gas hydrates in a porous medium
- Author
-
Dreus, A.Yu, primary, Bondarenko, V. I., additional, Biletskyi, V. S, additional, and Lysenko, R. S, additional
- Published
- 2020
- Full Text
- View/download PDF
21. Media education technologies in developing students' professional competence
- Author
-
Biletskyi, V. S., Onkovych, H., and Yanyshyn, O.
- Subjects
Petroleum Education ,media didactics ,Wikididactics ,higher education ,information literacy ,professionally oriented media education ,pedagogical scientific blog-didactics - Published
- 2019
22. Історія становлення промислового нафтовидобутку в Азербайджані (XIX – початок XX ст.)
- Author
-
Haiko, H. and Biletskyi, V. S.
- Subjects
нафтова промисловість ,ринок газу ,gas extraction ,a history of oil extraction ,a pipeline "Baku - Batum" ,oil ,нафтопровід "Баку - Батум" - Abstract
The issue is devoted to the historical study of oil industry development in Azerbaijan. The main stages of development of oil and gas production in Absheron were considered, and the international contribution of industrialists and engineers, including Azerbaijani and Ukrainian, was also considered. Particularly, the authors analyze a great donation in oil deposits' development made by the industrialists and engineers from different countries and of different nationalities, among them mining engineer Mykola Voskoboinikov; Azerbaijan industrialists: A. Mamedov, H. Tagiyev, M. Nagiev, M. Muchtarov, S. Asadulaev; Russian industrialists: V. Kokorev, P. Gubonin, K. Zubalov and Nobel's brothers, Rothschild's family, Rylsky's family, Vishau family; Armenian's financiers and industrialists: O. Mantashev, M. Aramiants, S. Lianosian (Lianozov); Ukrainian mining engineers: Konon Lysenko, Oleksiy Doroshenko, Semen Kvitka. The powerful oil industry was highlighted to appear in Baku's oil district at the end of the 19th century and occupied the second place after the USA in oil output and oil processing as well as in the innovation technical development and oil extraction technology enhancement. Owing to the capitals' diversification and involvement of foreign professionals, scientists and entrepreneurs from different countries, the gas and other oil products demands were secured not only within the Russian Empire, Azerbaijan and neighboring countries, but also came into the world trade markets. The role of a unique pipeline "Baku - Batum" for its time was highlighted in the success. The main burden of titanic and abundant work of the most powerful oil industry establishment was entirely on Azerbaijan nation that had eternal traditions of oil extraction, processing and usage. Nowadays, they have successfully continued the started traditions under the realities of the 21st century. Стаття присвячена дослідженням історії становлення нафтової промисловості Азербайджану. Простежено основні етапи розвитку нафтогазовидобування на Апшероні та внесок азербайджанських і українських інженерів у цю справу. Зокрема, автори аналізують внесок у освоєння нафтових покладів регіону промисловців та інженерів різних країн та національностей - гірничого інженера Миколи Воскобойникова, азербайджанських промисловців А. Мамедова, Г. Тагієва, М. Нагієва, М. Мухтарова, Ш. Асадулаєва, російських промисловців В. Кокорева, П. Губоніна, К.Зубалова, а також братів Нобелів, родин Ротшильдів, Рильських, Вішау, вірменських фінансистів й підприємців О. Манташева, М. Арамянца, С. Ліаносяна (Ліанозова), українських гірничих інженерів Конона Лисенка, Олексія Дорошенка, Семена Квітки. Показано, що наприкінці ХІХ ст. у Бакинському нафтовому районі була сформована потужна нафтова промисловість, яка тривалий час мала 2-е місце після США як за обсягами видобутку та переробки нафти, так і за інноваційним розвитком техніки та технології нафтовидобутку. Завдяки диверсифікації капіталів і участі фахівців, науковців і підприємців з різних країн вдалося не тільки забезпечити регіональні потреби Росії та сусідніх з Азербайджаном країн, але й вийти на більш широкі світові ринки гасу та інших нафтопродуктів. В цьому успіху підкреслено роль унікального на свій час нафтопроводу "Баку - Батум". Основний тягар величезної й різноманітної праці щодо створення одного з найпотужніших нафтопромислів світу дістався азербайджанському народові, який мав віковічні традиції видобутку, переробки й застосування нафти і який успішно продовжує ці традиції у ХХІ столітті.
- Published
- 2019
23. Improved thermogasodynamic model of a geothermal gas condensative deposit with production well
- Author
-
Fyk, M. I., Biletskyi, V. S., Al-sultan, M. B., and Abbood, M. H.
- Subjects
thermogasodynamic model ,wells-fluid ,heat exchange - Abstract
It is shown in the work that the wells-fluid are extracted from rocks by heat-retaining fluid from the open geothermal reservoir as from object with distributed cross-sectional parameters. This is due to the fact that the actual temperature distribution of the geothermal reservoir in dynamics affects the thermal properties of fluid-retaining rocks, which in turn affect the coefficient of heat exchange and heat transfer along the cross-section between the moving fluid, the fluid-retaining layer and adjacent rocks. The static temperature field of the original geothermal gradients in the case of outflow injection of the circulating coolant changes from the sides of the reservoir to the wellbore. A model of geothermal reservoir of gas-condensate well has been developed, which takes into account changes of thermal conductivity of rocks from the reservoir counture to the well bottom. The model includes refined equations of thermal energy balance for radial filtration of well production, containing convective and conductive components of heat exchange and heat flow. This allows, in comparison with the known methodological approaches, to clarify by 12-14% the forecast of heat extraction from a geothermal reservoir with a circulating coolant thrue the bottom and productive layer of a gas-condensate well.
- Published
- 2019
24. Дослідження течії бурового розчину в силовій секції гвинтового вибійного двигуна
- Author
-
Biletskyi, V. S., Vitryk, V., Mishchuk, Y., Fyk, M., Dzhus, A., Kovalchuk, Yu., Romanyshyn, T., and Yurych, A.
- Subjects
статор ,method of finite elements ,stator ,drilling mud ,pressure field ,screw down-hole motor ,parametric fields ,гвинтовий вибійний двигун ,ротор ,пара "ротор-статор" ,modelling ,буровий розчин ,pair "rotor-stator" ,SDM ,параметричні поля ,rotor ,screw down-hole motors ,моделювання - Abstract
By using the module Flow Simulation from the programming environment SolidWorks, we obtained parametric fields of turbulent flow of drilling mud in the subject of research – a power section of the screw down-hole motor (SDM). The subject of research is the characteristics of turbulence of the drilling mud flow. An analysis of the obtained model parametric fields of turbulent flow of drilling mud in the power section of SDM shows two distinctive regions that differ by the characteristics of turbulence in the drilling mud current. These sections are localized in the neighborhood of contact points "rotor-stator", and along the distance between these points. In the first section, the developed flow turbulence almost disappears; the dissipation of flow energy significantly decreases. In the second section, there is a developed turbulence of drilling mud, which causes increased dissipation of flow energy and a possible damage to the stator by a solid phase of drilling mud. Turbulent time scale in the second region reaches the minimum values of 0.001 s, and the metrical scale of pulsations is comparatively small – from 0.011 to 5.666 m, indicating the presence of small-scale turbulent vortices and the elevated dissipation of flow energy. Thus, the second section is the most vulnerable to a damage to the stator by a solid phase of drilling mud. An endoscopic examination of the surface of the SDM stator, which we conducted, revealed damage to its working surface, specifically deep scratches, guide scratches, cavities. Localization of damage is from the middle and to the tail part of the power section at a distance of 2.53−4.78 m from the beginning of the power section of SDM. The models obtained are recommended for using in hydraulic calculations of SDM, for choosing a rational mode of its operation. Моделюванням FlowSimulation/SolidWorks отримані параметричні поля течії бурового розчину в об’єкті дослідження – силовій секції гвинтового вибійного двигуна (ГВД). Предмет дослідження – характеристики турбулентності потоку поблизу точок дотику "ротор-статор" та між ними. Друга ділянка характерна розвиненою турбулентністю, дисипацією енергії потоку, пошкодженнями статора твердою фазою розчину, що підтвердили ендоскопічні обстеження. Моделі доцільно використати при гідравлічних розрахунках ГВД.
- Published
- 2018
25. Media education technologies in developing students' professional competence
- Author
-
Biletskyi, V. S., Onkovych, A., and Yanyshyn, O.
- Subjects
media education technologies ,Wikididactics ,higher education media didactics ,information literacy ,professionally oriented media education ,pedagogical scientific blog-didactics - Published
- 2018
26. Особливості збагачення рідкіснометалевої руди у відцентровому полі
- Author
-
Biletskyi, V. S. and Shpylovyj, Kostjantyn
- Subjects
recovery ,рідкіснометалева руда ,відцентрова концентрація ,магнітне поле ,rare-metal ore ,розділення ,centrifugal concentration ,magnetic separation - Abstract
The article is devoted to the problem of dressing of finely disseminated rare-metal ore in free-flow centrifugal concentrators. It is shown low efficiency of the dressing of the ores containing mineral of intermediate density in addition to the light and heavy minerals. To raise the contrast of separated mineral grains we proposed preliminary magnetic separation of minerals extraction intermediate density – aegerine, biotite, etc. before the separation of heavy and light minerals in the centrifugal field. But the complete absence of the intermediate density grains in the concentrating milling ore is also negative.We investigated the patterns of the recovering heavy minerals from rare-metal ore of domestic deposits with different content intermediate mineral density in the centrifugal field. It is shown that for this type of ore the optimal intermediate density mineral content is 4,8-5,2 %. Статтю присвячено проблемі збагачення дрібнодисперсної рідкіснометалевої руди у відцентрових концентраторах. Показана низька ефективність збагачення руд з високим вмістом мінералів проміжної щільності. Для підвищення контрасту мінеральних зерен, що розділяються, нами запропоновано до розділення важких і легких мінералів у відцентровому полі, проводити попереднє вилучення магнітною сепарацією слабомагнітних мінералів проміжної щільності – егірину, біотиту і т. д. Але повна відсутність зерен проміжної щільності в збагачувальній руді також негативно позначається на результатах збагачення. Встановлені закономірності вилучення у відцентровому полі важких мінералів з рідкіснометалевої руди вітчизняного родовища з високим вмістом мінералів проміжної щільності. Показано, що для цього типу руди оптимальний вміст мінеральних речовин проміжної щільності становить 4,8-5,2 %.
- Published
- 2018
27. Теоретичні передумови руйнування гірських порід при гідравлічному розриві пласта та аналіз пост-ефектів
- Author
-
Biletskyi, V. S., Horobets, L., Fyk, M., and Al-Sultan, M.
- Subjects
mechanoactivation ,механоактивація ,pH measurement ,термодинамічний аналіз ,потенціометрія ,акустична емісія ,thermodynamic analysis ,Rebinder’s effect ,рН-метрія ,potentiometry ,гідравлічний розрив пласта ,hydraulic seam fracture ,acoustic emission ,акустичні хвилі ,ефект Ребіндера ,acoustical waves - Abstract
Purpose. Theoretical substantiation of the methodological foundations of possible effects and aftereffects identification of the hydraulic seam fracture (HSF) technology. Methods. The research structure and procedure includes: studying the power engineering aspect of the rock failure, the acoustical wave effects; thermodynamic analysis of rock failure, analysis of surfaces mechanic activation at rock failure and aftereffect of the primary pore space self-development at the HSF due to the Rebinder’s effect. Findings. It was established that among the fundamental consistent patterns that determine the formation and development of the HSF technology aftereffects during formations mining, are the methodological provisions and criteria for failure parameters prediction and grinding effects, namely: the average and local energy density of geoenvironment destruction, efficiency of grinding, the average particle and pore size, the specific surface area, the specific energy consumption per unit of the resulting surface. The connection between the parameters of the acoustic wave and the size of the fractures, which forms the basis of the acoustic emission (AE) method, is experimentally confirmed. Originality. It is established that the database for evaluating the expected fracture effects in the working zone of the HSF is: AE activity, specific acoustic radiation, spectrum of signals, characteristic amplitudes under the condition of physical modeling on the model samples of the geoenvironment behavior. It is shown that the critical state of a substance corresponding to the beginning of failure at the microlevel should be considered from the standpoint of thermodynamics as a phase change (evaporation, sublimation) near the critical point, based on the temperature critical values and the specific energy of the phase change. The presence of surfaces mechanic activation in the rock failure is experimentally proved. The hypothesis concerning the rock pore space development aftereffect during hydraulic seam fracture due to the Rebinder’s effect is presented. Practical implications. It is proposed to size up the degree of geoenvironment destruction in the process of the HSF by the Kd parameter, which is equal to the product of the maximum amplitude of acoustic signals on the total acoustic activity of the destruction zone. It is established that the conditions for rock failure at the HSF are determined by the relationship between the rock pressure P and the volume energy density W of the failure. It is shown that the level of surfaces mechanoactivation can be estimated by adsorption characteristics – the adsorption potential and the pH of the newly discovered surfaces. Мета. Теоретичне обґрунтування методологічних основ встановлення умов прояву можливих ефектів і пост-ефектів технології гідравлічного розриву пласта (ГРП). Методика. Структура та послідовність проведення дослідження включає вивчення енергетичного аспекту руйнування гірського масиву, дії акустичних хвиль, термодинамічний аналіз руйнування гірського масиву, аналіз механоактивації поверхонь при руйнуванні гірського масиву та пост-ефекту саморозвитку первинного пористого простору ГРП внаслідок дії ефекту Ребіндера. Застосовано метод акустичної емісії, потенціометрії та рН-метрії. Результати. Встановлено, що до числа фундаментальних закономірностей, які визначають формування і розвиток пост-ефектів технології ГРП при відпрацюванні продуктивних пластів, відносяться методичні положення й критерії для прогнозу показників руйнування та ефектів подрібнення, а саме: середньої та локальної густини енергії при руйнуванні геосередовища, ККД подрібнення, середній розмір часток і пор, питома поверхня, питомі витрати енергії на одиницю одержаної поверхні. Експериментально підтверджений зв’язок між параметрами акустичної хвилі та розміром тріщин, що складає основу методу акустичної емісії (АЕ). Наукова новизна. Встановлено, що базу інформації для оцінки очікуваних у робочій зоні ГРП ефектів руйнувань складають активність АЕ, питоме акустичне випромінювання, спектр сигналів, характерні амплітуди за умови фізичного моделювання поведінки геосередовища на модельних зразках. Визначено, що граничний стан речовини, що відповідає початку руйнування на мікрорівні, слід розглядати з позицій термодинаміки як фазовий перехід (випаровування, сублімація) поблизу критичної точки, виходячи із критичних значень температури і питомої енергії фазового переходу. Експериментально доведено наявність механоактивації поверхонь при руйнуванні гірського масиву. Висунута гіпотеза щодо пост-ефекту розвитку пористого простору гірського масиву при ГРП у контексті дії ефекту Ребіндера. Практична значимість. Запропоновано оцінювати ступінь руйнування геосередовища у процесі ГРП показником Кр, що дорівнює добутку максимальної амплітуди акустичних сигналів на сумарну акустичну активність зони руйнування. Встановлено, що умови руйнування гірського масиву при ГРП детермінуються співвідношенням між гірським тиском Р і об’ємною густиною енергії W деформації. Показано, що ступінь механоактивації поверхонь може бути оцінена за характеристиками адсорбції – потенціалом адсорбції та показником рН нововідкритих поверхонь.
- Published
- 2018
28. Resource evaluation of geothermal power plant under the conditions of carboniferous deposits usage in the Dnipro-Donetsk depression
- Author
-
Fyk, M. I., Biletskyi, V. S., and Abbud, M.
- Subjects
carboniferous deposits ,geothermal power plants ,hydrocarbon fuels ,oil and gas wells - Abstract
The objective of the work is to substantiate the actualization of the problem of obtaining geothermal energy from oil and gas wells of oil and gas production facilities in the central-eastern part of the Dnieper-Donetsk Depression (DDD). The research methodology is based on the collection and statistical processing geophysical data of the DDD oil and gas deposits, the use of balance equations for energy and substance matter. The main result of the work is that the principal technological scheme of the geothermal system has been developed and the geothermal potential of oil and gas wells in the experimental zone has been analyzed. There have been considered the technological and ecological aspects of geothermal heat usage from depleted deposits of the DDD wells, which were disclosed into сarboniferous deposits productive horizons.
- Published
- 2018
29. The effect of annealing on the transverse electrotransport in YBa2Cu3O7–δ single crystals irradiated with high-energy electrons
- Author
-
Khadzhai, G. Ya., primary, Biletskyi, V. I., additional, and Vovk, R. V., additional
- Published
- 2019
- Full Text
- View/download PDF
30. Сучасні лісозаготівлі та їх вплив на природне поновлення лісу
- Author
-
Білецький, В. Р., Biletskyi, V., Білецький, В. Р., and Biletskyi, V.
- Abstract
Постановка проблеми. Сучасні лісозаготівлі розвиваються на основі широкого застосування комплексної механізації. Механізація всіх ланок лісозаготівельного виробництва, забезпечує високу продуктивність праці. Широке практичне застосування комплексу механізованих робіт, пов’язане головним чином з концентрованими та суцільнолісосічними рубками. Останнім часом, все частіше, механізуються також поступові та вибіркові рубки. Однією з важливих проблем є усунення протиріч між необхідністю застосування способів рубок, що найбільш відповідають лісівничим вимогам, і можливістю комплексної механізації лісозаготівель, тобто, як би вдало не був підібраний спосіб рубки, гарантувати успішність лісовідновлення майже неможливо.
- Published
- 2018
31. Ефективність використання теплових насосів у системах теплопостачання
- Author
-
Медведський, О. В., Білецький, В. Р., Вензовська, В. Н., Medvedskyi, О., Biletskyi, V., Venzovskaya, V., Медведский, А. В., Белецкий, В. Р., Вензовская, В. Н., Медведський, О. В., Білецький, В. Р., Вензовська, В. Н., Medvedskyi, О., Biletskyi, V., Venzovskaya, V., Медведский, А. В., Белецкий, В. Р., and Вензовская, В. Н.
- Abstract
Тепловий насос – це універсальний прилад, що забезпечує виконання трьох операцій – опалення, гаряче водопостачання та кондиціювання. Основна відмінність теплового насосу від всіх інших джерел тепла полягає у виключній можливості використовувати безкоштовну поновлювану низькотемпературну енергію навколишнього середовища. Близько 75–80 % від потужності, яку видає тепловий насос, фактично «викачується» з навколишнього середовища, використовуючи розсіяну енергію ґрунту, води та повітря. І тільки 20–25 % енергії необхідно затратити для роботи самого теплового насоса., The heat pump is a versatile appliance that provides three operations – heating, hot water supply and air conditioning. The main difference between a heat pump and all other heat sources is the exclusive ability to use free renewable low-temperature energy of the environment. About 75–80 % of the output of the heat pump is actually «pumped» out of the environment, using the scattered energy of soil, water and air. And only 20–25 % of energy must be spent for the heat pump itself., Тепловой насос – это универсальный прибор, обеспечивающий выполнение трех операций – отопление, горячее водоснабжение и кондиционирование. Основное отличие теплового насоса от всех остальных источников тепла заключается в исключительной возможности использовать бесплатную возобновляемую низкотемпературную энергию окружающей среды. Около 75–80 % от мощности, которую выдает тепловой насос, фактически «скачивается» из окружающей среды, используя рассеянную энергию почвы, воды и воздуха. И только 20–25 % энергии необходимо затратить для работы самого теплового насоса.
- Published
- 2018
32. A Methodology for Calculating the Productivity of A Hydrocarbon-Geothermal Well.
- Author
-
Fyk, M. I., Biletskyi, V. S., and Desna, N. A.
- Subjects
- *
GAS condensate reservoirs , *COMBUSTION gases , *FLUID flow , *PROBLEM solving - Abstract
The article deals with the development of a refined methodology for calculating the production rate of a hydrocarbon-geothermal well under a non-isothermal lifting mode. The proposed methodology compares favourably with the basic one by taking into account the mutual influence of pressure head losses and those of thermal energy. This problem was solved by taking into consideration the convective component of heat exchange in a vertical (inclined) pipe when assessing hydraulic pressure head losses due to viscous friction. The methodology was tested for the conditions of Kotelev gas condensate field. The discrepancy between the values calculated according to the basic and the proposed methodologies for the heat flow rate constitute 4-7 % on average, while for the fluid flow rate the discrepancy averages 2.5-8.5 %. The possibility was proved of optimizing the dual mode of operation of a hydrocarbon-geothermal well in terms of the combined thermal energy being produced and the caloric heat energy of the gas condensate combustion. [ABSTRACT FROM AUTHOR]
- Published
- 2021
33. ПРОБЛЕМЫ СЕРТИФИКАЦИИ ВЗРЫВЧАТЫХ МАТЕРИАЛОВ В УКРАИНЕ И ПУТИ ИХ ПРЕОДОЛЕНИЯ
- Author
-
Tkachuk, Kostiantyn Nyfontovych, Krivtsov, Mykola Vasylovych, Pashkov, Anatolii Pavlovych, and Biletskyi, V O
- Subjects
вибухові матеріали ,випробувальні лабораторії ,сертифікація ,взрывчатые материалы ,испытательные лаборатории ,сертификация ,explosive materials ,testing laboratories ,certification - Abstract
Розглянуто питання створення в Україні органу сертифікації вибухових матеріалів та мережі випробувальних лабораторій, що дозволить підвищити безпеку проведення вибухових робіт, Рассмотрены вопросы создания в Украине органа сертификации взрывчатых материалов и сети испытательных лабораторий,что позволит повысить безопасность проведения взрывных работ, The questions of creation in Ukraine of the certification body of explosive materials and a network of testing laboratories, which will increase the safety of blasting
- Published
- 2017
34. Сучасні лісозаготівлі та їх вплив на природне поновлення лісу
- Author
-
Biletskyi, V.
- Subjects
сосна звичайна ,поновлення лісу ,механізовані лісокультурні заходи - Abstract
Постановка проблеми. Сучасні лісозаготівлі розвиваються на основі широкого застосування комплексної механізації. Механізація всіх ланок лісозаготівельного виробництва, забезпечує високу продуктивність праці. Широке практичне застосування комплексу механізованих робіт, пов’язане головним чином з концентрованими та суцільнолісосічними рубками. Останнім часом, все частіше, механізуються також поступові та вибіркові рубки. Однією з важливих проблем є усунення протиріч між необхідністю застосування способів рубок, що найбільш відповідають лісівничим вимогам, і можливістю комплексної механізації лісозаготівель, тобто, як би вдало не був підібраний спосіб рубки, гарантувати успішність лісовідновлення майже неможливо.
- Published
- 2017
35. Техніка та технологія дезінтеграції й гравітаційного збагачення рідкіснометалічних руд
- Author
-
Shpylovyi, K. L., Shpylovyi, L. V., Biletskyi, V. S., and Komarova, O. I.
- Subjects
відцентровий концентратор ,disintegration ,mill of impact-centrifugal action type ,ore preparation ,млин ударно-відцентрового типу ,рудопідготовка ,centrifugal field ,гравітаційне збагачення ,дезінтеграція ,centrifugal concentrator ,gravity-based beneficiation ,відцентрове поле - Abstract
On the base of the analysis of centrifugal concentrators designs there has been justified the selection of apparatus for the rare-metal ores beneficiation. Process of pyrochlore ore grinding in mills of different types has been investigated and the expediency of use of impact centrifugal action mills to ensure selectivity of minerals disclosure has been founded. Efficient technical and technological parameters of the centrifugal action mills have been justified on the base of active experimental method. The influence of disintegration methods on technological indication of rare-metal ore beneficiation of Mazurovske deposits in centrifugal Nelson concentrator has been analyzed. На основі аналізу конструкцій відцентрових концентраторів обґрунтовано вибір апарату для збагачення рідкіснометалічних руд. Виконано дослідження процесу подрібнення пірохлорової руди в млинах різного типу та встановлено доцільність застосування млинів ударно-відцентової дії для забезпечення селективності розкриття мінералів. Методом активного експерименту обґрунтовано раціональні технічні та технологічні параметри млина ударно-відцентрової дії. Проаналізовано вплив способів дезінтеграції на технологічні показники збагачення рідкіснометалевої руди Мазурівського родовища у відцентровому концентраторі Нельсона.
- Published
- 2017
36. The effect of the chaotic pinning potential on intrinsic pinning in YBa2Cu3O7-δ single crystals.
- Author
-
Vovk, N. R., Vovk, R. V., Khadzhai, G. Ya., Biletskyi, V. I., Samoylov, A. V., Solovyov, A. L., and Matsepulin, A. V.
- Subjects
FLUX pinning ,SINGLE crystals ,MAGNETORESISTANCE ,MAGNETIC fields ,HIGH temperatures ,PERSONAL identification numbers - Abstract
We study the temperature dependence of the in-plane magneto-resistance ρ
ab (T) in the untwined YBa2 Cu3 O7-δ single crystals after irradiation by fast electrons (energy 0.5-2.5 MeV, dose 1018 cm-2 ), also with a small oxygen hypostoichiometry at different angles between the external magnetic field 15 kOe and the ab-planes α. We found that at high temperatures in the pseudogap region external magnetic field does not affect the pab(T), but it broadens transitional region Tc - Tc0 from 0.3 K at zero field and α = 0 to approximately 6 K at α = 90° in the field. In the case of an unirradiated sample, ρab (T) display a 3D to 2D dimensional crossover when temperature decreases from Tc to Tc0 and scaling near the Tc0 which we relate to the flux-flow and vortex-lattice melting. The reasons for the appearance of low-temperature "tails" (paracoherent transitions) on resistive transitions corresponding to different phase regimes of the vortex matter are discussed. [ABSTRACT FROM AUTHOR]- Published
- 2020
- Full Text
- View/download PDF
37. IDENTIFICATION OF FACTORS TO REDUCE THE ENERGY COSTS OF DISPERSING IN JETS.
- Author
-
Gorobets, L., Verhorobina, I., Biletskyi, V., Krivenko, A., Grishchenko, M., and Bulakh, O.
- Subjects
ACOUSTIC emission ,METALLURGICAL plants ,ENERGY consumption ,COST - Abstract
This paper reports the operational indicators for industrial-sized jet grinding plants (JGP). The dependences of specific energy consumption on productivity have been generalized. The technological patterns in the working process were considered in terms of reducing energy costs using the operation of gas-jet and steam-jet mills at the Vilnohirsk Mining and Metallurgical Plant (VMMP) involved in crushing zircon to 60 µm as an example. The acoustic activity in the grinding area has been studied relative to the concentration of μ and in combination with the technological assessment of the mill’s performance. A broadband piezo sensor was used in the assessment of acoustic emission (AE). It is shown that the acoustic activity of the grinding zone contains information about the effects of dispersion and energy costs for grinding, which makes it possible to estimate and minimize the specific energy costs. It has been established that the principal factors of JGP energy intensity are the initial temperature of the energy carrier, which sets the speed of the jet, and the concentration of solid phase in the jet, which changes the effects of dispersing. A technique has been proposed for the current assessment of energy costs in the working process of dispersion based on the experimental acoustic data and a pattern of the acoustic dimensional effect. The estimated acoustic indicators of the energy cost of a jet mill for the conditions of VMMP were derived. To reduce the energy cost of dispersion (γ
s ≅ 0.42 J/cm²), the effect of adjusting the loading of jets to γN ≅ 1.8 J/pulse is employed. Thus, this study has investigated the dispersal of solid loose material in jets with the involvement of acoustic information about the operation of jet mills, which makes it possible to comprehensively assess and minimize (optimize) the specific energy costs of grinding [ABSTRACT FROM AUTHOR]- Published
- 2020
- Full Text
- View/download PDF
38. Модельні дослідження впливу параметрів ґрунтообробних робочих органів на якість їх роботи
- Author
-
Кухарець, С. М., Шелудченко, Б. А., Білецький, В. Р., Романишин, О. Ю., Бушма, С. В., Дідківський, М. П., Шубенко, В. О., Kukharets, S., Sheludchenko, B., Biletskyi, V., Romanishyn, O., Bushma, S., Didkivskyi, M., Shubenko, V., Кухарец, С. Н., Белецкий, В. Р., Романишин, А. Ю., Дидковский, М. П., Шубенко, В. А., Кухарець, С. М., Шелудченко, Б. А., Білецький, В. Р., Романишин, О. Ю., Бушма, С. В., Дідківський, М. П., Шубенко, В. О., Kukharets, S., Sheludchenko, B., Biletskyi, V., Romanishyn, O., Bushma, S., Didkivskyi, M., Shubenko, V., Кухарец, С. Н., Белецкий, В. Р., Романишин, А. Ю., Дидковский, М. П., and Шубенко, В. А.
- Abstract
Пропонується методика імітаційного моделювання динаміки взаємодії робочих органів з реологічними моделями ґрунту. Наводяться результати експериментального обґрунтування параметрів ротаційно-лопатевого робочого органу ґрунтообробного знаряддя., The techniques of simulation modeling of the dynamics of interaction of tools with soil reological models is suggested. The paper substantiates experimentally the parameters of rotation and blade of soil cultivation tool., Предлагается методика имитационного моделирования динамики взаимодействия рабочих органов с реологическими моделями грунта. Приводятся результаты экспериментального обоснования параметров ротационно-лопастного рабочего органа почвообрабатывающего орудия.
- Published
- 2017
39. Первинна обробка вихідних даних для контролю екологічної надійності дизельних двигунів
- Author
-
Бутенко, С. Г., Білецький, В. Р., Шубенко, В. О., Butenko, S., Biletskyi, V., Shubenko, V., Билецкий, В. Р., Бутенко, С. Г., Білецький, В. Р., Шубенко, В. О., Butenko, S., Biletskyi, V., Shubenko, V., and Билецкий, В. Р.
- Abstract
Розглянута відповідність вибраних теоретичних законів розподілення стосовно результатів експериментальної дефектації дизельних двигунів В-2 та В-46 в умовах фіксованих рівнів їх екологічної безпеки., Рассмотрено соответствие выбранных теоретических законов распределения применительно к результатам экспериментальной дефектации дизельных двигателей В-2 и В-46 в условиях фиксированных уровней их экологической безопасности., The paper considers the correspondence of theoretical distribution principles chosen as to the results of experimental culling of B-2 and B-46 Diesel engines, under fixed levels of ecological safety.
- Published
- 2017
40. ПРОБЛЕМИ СЕРТИФІКАЦІЇ ВИБУХОВИХ МАТЕРІАЛІВ В УКРАЇНІ ТА ШЛЯХИ ЇХ ПОДОЛАННЯ
- Author
-
Tkachuk, Kostiantyn Nyfontovych, Krivtsov, Mykola Vasylovych, Pashkov, Anatolii Pavlovych, Biletskyi, V O, Tkachuk, Kostiantyn Nyfontovych, Krivtsov, Mykola Vasylovych, Pashkov, Anatolii Pavlovych, and Biletskyi, V O
- Abstract
Розглянуто питання створення в Україні органу сертифікації вибухових матеріалів та мережі випробувальних лабораторій, що дозволить підвищити безпеку проведення вибухових робіт, Рассмотрены вопросы создания в Украине органа сертификации взрывчатых материалов и сети испытательных лабораторий,что позволит повысить безопасность проведения взрывных работ, The questions of creation in Ukraine of the certification body of explosive materials and a network of testing laboratories, which will increase the safety of blasting
- Published
- 2017
41. Особливості використання малогабаритних газогенераторних модулів
- Author
-
Kukharets, S., Yarosh, Ya., Biletskyi, V., and Golub, G.
- Subjects
электроэнергия ,biomass ,air ,електроенергія ,fuel gas ,біомаса ,dryer ,сушилка ,gasifier ,сушарка ,биомасса ,газогенератор ,electricity ,воздух ,повітря ,горючий газ - Abstract
Наведено результати експериментальних досліджень впливу параметрів роботи генератора горючого газу та виду сировини на якісний склад газу. Сформовано концепцію використання портативних модулів отримання електроенергії та живлення низькотемпературних сушарок., Приведены результаты экспериментальных исследований влияния параметров работы генератора горючего газа и вида сырья на качественный состав газа. Сформирована концепция использования портативных модулей получения электроэнергии и питания низкотемпературных сушилок., The results of experimental studies of the effect parameters of the combustible gas generator and the type of raw materials to the quality of the gas. Formed concept of using portable modules generate electricity and supply low-temperature dryers.
- Published
- 2016
42. TECHNIQUE AND TECHOLOGY OF RARE-METAL ORES DESINTEGRATION AND GRAVITY-BASED BENEFICATION
- Author
-
Shpylovyi, K. L., primary, Shpylovyi, L. V., primary, Biletskyi, V. S., primary, and Komarova, O. I., primary
- Published
- 2017
- Full Text
- View/download PDF
43. First metals discovery and development the sacral component phenomenon
- Author
-
Haiko, H. and Biletskyi, V. S.
- Subjects
primal mining communities ,irrational traditions ,sacral factors ,birth of metallurgy ,industrial archeology ,mining cults ,history of mining - Abstract
This article is accentuated on the civilizational significance of the first industrial metals discovery, it reveals the prerequisites for the development of ores and the main stages of metals mastering connected with centuries-old experience of the previous mining activities of mankind. The authors suggest the hypothesis that the metallurgy was born in the depths of sustainable communities of archaic miners, which were motivated by not only utilitarian but also sacral factors. A new hypothesis is examined in comparison to the established versions of accidental discovery of metals.
- Published
- 2015
44. IMPROVEMENT OF AN ENGINEERING PROCEDURE FOR CALCULATING THE NON-ISOTHERMAL TRANSPORTATION OF A GAS-LIQUID MIXTURE.
- Author
-
Fyk, M., Biletskyi, V., Fyk, I., Bondarenko, V., and Al-Sultan, M.
- Subjects
PIPELINES ,SCIENTIFIC literature ,GAS compressibility ,EQUATIONS of motion ,NATURAL gas pipelines - Published
- 2019
- Full Text
- View/download PDF
45. Ґрунтообробний агрегат
- Author
-
Білецький, В. Р., Дубровін, В. О., Шелудченко, Б. А., Кухарець, С. М., Мороз, А. І., Билецкий, В. Р., Дубровин, В. А., Кухарец, С. Н., Мороз, А. И., Biletskyi, V., Dubrovin, V., Sheludchenko, B., Kukharets, S., Moroz, A., Білецький, В. Р., Дубровін, В. О., Шелудченко, Б. А., Кухарець, С. М., Мороз, А. І., Билецкий, В. Р., Дубровин, В. А., Кухарец, С. Н., Мороз, А. И., Biletskyi, V., Dubrovin, V., Sheludchenko, B., Kukharets, S., and Moroz, A.
- Abstract
Ґрунтообробний агрегат, що містить трактор на колісних рушіях, які ущільнюють ґрунт з залишковою деформацією на глибину H1, та ґрунтообробну машину з встановленими на ній робочими органами, які обробляють ґрунт на глибину H2, який відрізняється тим, що робочі органи ґрунтообробної машини встановлені таким чином, що H2>=H1., Почвообрабатывающий агрегат содержит трактор на колесных двигателях, почвообрабатывающую машину с рабочими органами., A tillage unit contains a tractor on wheeled movers, a tillage machine with working elements.
- Published
- 2016
46. Комбінований культиватор «ОПС-1»
- Author
-
Слинько, О. П., Білецький, В. Р., Дубровін, В. О., Кіндер, М. В., Кухарець, С. М., Лапенко, Г. О., Мороз, А. І., Прасолов, Є. Я., Флегантов, Л. О., Ярошенко, П. П., Браженко, С. А., Slynko, O., Biletskyi, V., Dubrovin, V., Kinder, M., Kukharets, S., Lapenko, H., Moroz, A., Prasolov, Y., Flehantov, L., Yaroshenko, P., Brazhenko, S., Билецкий, В. Р., Дубровин, В. А., Киндер, Н. В., Кухарец, С. Н., Лапенко, Г. А., Мороз, А. И., Прасолов, Е. Я., Флегантов, Л. А., Слинько, О. П., Білецький, В. Р., Дубровін, В. О., Кіндер, М. В., Кухарець, С. М., Лапенко, Г. О., Мороз, А. І., Прасолов, Є. Я., Флегантов, Л. О., Ярошенко, П. П., Браженко, С. А., Slynko, O., Biletskyi, V., Dubrovin, V., Kinder, M., Kukharets, S., Lapenko, H., Moroz, A., Prasolov, Y., Flehantov, L., Yaroshenko, P., Brazhenko, S., Билецкий, В. Р., Дубровин, В. А., Киндер, Н. В., Кухарец, С. Н., Лапенко, Г. А., Мороз, А. И., Прасолов, Е. Я., and Флегантов, Л. А.
- Abstract
Комбінований культиватор, що включає причіпний пристрій, раму зі з'єднаними з нею ємністю для зберігання та механізмом подачі рідких хімічних препаратів, секціями культиваторних лап, розміщених послідовно на окремих гряділях з копіювальними колесами. При цьому за культиваторними лапами встановлено бокові лапи-бритви-підгортачі та ротаційні органи з привідними і робочими розпушувачами, розташованими на маточині з віссю, розміщеною в поперечно-вертикальній площині із можливістю регулювання кута α в межах від 0 до 90° (виключаючи 0°…60°) до вертикалі, причому осі ротаційних органів встановлені в поздовжньо-вертикальній площині із можливістю регулювання кута β в межах від 0 до 90° (виключаючи 0±60°) до вертикалі., Предложенный комбинированный культиватор включает прицепное устройство, раму с соединенными с нею емкостью для хранения и механизмом подачи жидких химических препаратов, секциями культиваторных лап, размещенных последовательно на отдельных грядилях с копировальными колесами. При этом за культиваторными лапами установлены боковые лапы-бритвы-окучники и ротационные органы с приводными и рабочими рыхлителями, расположенными на ступице с осью, размещенной в поперечно-вертикальной плоскости с возможностью регулирования угла a в пределах от 61 до 90° по вертикали. Оси ротационных органов установлены в продольно-вертикальной плоскости с возможностью регулирования угла b в пределах от 0 до 90° по вертикали., A combined cultivator comprises a trailed device, a frame with the following units connected therewith: a container for preserving and a mechanism for delivery liquid chemicals, sections of hoe blades arranged in series on separate beams with feeling wheels. Behind the hoe blades the following units are arranged: side blades-razors-coverers and rotary elements with driving and working driving and working rippers mounted on the hub with an axle arranged in the transversal-vertical plane in such a manner as to allow regulating the angle a within the ranges from 61 to 90° vertically. The axles of the rotary elements are disposed in the longitudinal-vertical plane in such a manner as to allow regulating the angle b within the ranges of 0 to 90° vertically.
- Published
- 2016
47. Особливості використання малогабаритних газогенераторних модулів
- Author
-
Кухарець, С. М., Ярош, Я. Д., Білецький, В. Р., Голуб, Г. А., Кухарец, С. Н., Билецкий, В. Р., Kukharets, S., Yarosh, Ya., Biletskyi, V., Golub, G., Кухарець, С. М., Ярош, Я. Д., Білецький, В. Р., Голуб, Г. А., Кухарец, С. Н., Билецкий, В. Р., Kukharets, S., Yarosh, Ya., Biletskyi, V., and Golub, G.
- Abstract
Наведено результати експериментальних досліджень впливу параметрів роботи генератора горючого газу та виду сировини на якісний склад газу. Сформовано концепцію використання портативних модулів отримання електроенергії та живлення низькотемпературних сушарок., Приведены результаты экспериментальных исследований влияния параметров работы генератора горючего газа и вида сырья на качественный состав газа. Сформирована концепция использования портативных модулей получения электроэнергии и питания низкотемпературных сушилок., The results of experimental studies of the effect parameters of the combustible gas generator and the type of raw materials to the quality of the gas. Formed concept of using portable modules generate electricity and supply low-temperature dryers.
- Published
- 2016
48. Gorniczy skarby przeslosci w nauce i edukacii Ukrainy
- Author
-
Biletskyi, V. S. and Gayko, G. I.
- Subjects
działalnością górniczą ,edukacii Ukrainy ,ukraińskich uczonych ,gorniczy skarby - Published
- 2014
49. Theory of highly loaded coal-water slurries
- Author
-
Biletskyi, V. S., Krut, O. A., and Sergeyev, P. V.
- Abstract
There has been analyzed the existing schemes of strapping of circulated system of drilling set during drilling with well washing by the foam and argued the necessity of its efficient raising; there has been chosen the scheme of strapping of circulated system during drilling with well washing by the foam for the possibility of the most rational usage of existing foamgenerating equipment. В статті проаналізовані існуючі схеми обв'язки циркуляційної системи бурової установки при бурінні з промиванням свердловини піною та обґрунтована необхідність підвищення їх ефективності; для можливості найбільш раціонального використання існуючого піногенеруючого устаткування передбачена схема обв'язки циркуляційної системи при бурінні з промиванням свердловини піною.
- Published
- 2014
50. Electrophysical properties of nanoporous cerium dioxide–water system
- Author
-
Biletskyi, V. I., primary, Bogdanov, V. V., additional, Boyko, Yu I., additional, Vovk, R. V., additional, Khadzhai, G. Ya, additional, Goulatis, I. L., additional, and Chroneos, A. I., additional
- Published
- 2016
- Full Text
- View/download PDF
Catalog
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.