Search

Proton exchange membranes (PEMs) were synthesized in polyvinyl alcohol (PVA) matrix by impregnating TiO2-Si or SrTiO3-Si as proton exchanger for microbial fuel cells (MFCs). These PEMs were physically characterized, which approved the presence of hygroscopic oxides like SiO2 to increase the proton transfer due to the formation of Si-H along with the water channelling through TiO2 or SrTiO3 induced microstructural modifications. Chemical characterization techniques further illustrated their comparable performance to the commercially available Nafion-117 and superior performance than bare PVA membrane. Polarization curves for MFCs using TiO2-Si- or SrTiO3-Si-based PVA membranes exhibited a power density of 6.16 ± 0.31 W m−3 and 5.39 ± 0.27 W m−3, respectively. Power density of MFC with TiO2-Si membrane was comparable to that of the MFC using Nafion-117 (6.50 ± 0.33 W m−3). Thus, comparable properties and 30-folds less synthesis cost of the fabricated TiO2-Si-impregnated PVA membrane in comparison to Nafion, demonstrate its potential for real-life applications in MFC. [ABSTRACT FROM AUTHOR]

Waste generation from healthcare facilities now has become a concerning issue as it contain plastic and metals. Medicine wrappers are one of the major portions of healthcare solid waste, which impel intensive solid waste management practice due to fewer possibilities of deriving by-products. However, it can be recycled and used as an electrode material in microbial fuel cells (MFCs). An electrode material for application in MFCs is a crucial component, which governs total fabrication cost as well as power recovery, thus a cost-effective, stable and durable electrode is essential. In this endeavour, a new metallic (aluminium) waste material, a waste medicine wrapper (WMW), was evaluated for feasibility to be used as anode/cathode in MFCs. Based on the stability test under corrosive environment (1 N KCl), the WMW electrode sustained a maximum current of 46 mA during cyclic voltammetry (CV) and noted only 14% reduction in current at an applied voltage of +0.4 V after 2500 s in chronoamperometry, indicating its good stability. Power recovery from MFC using WMW was higher than the MFC using bare carbon felt as an anode (27 vs. 21 mW/m2). The entire analytical test results viz. CV, electrochemical impedance spectroscopy and power performance established WMW as an excellent anode rather than cathode material. [ABSTRACT FROM AUTHOR]