Search

In the present study, the status of water quality, environmental contamination in the lower stretch of Subarnarekha River with respect to potentially toxic elements (PTEs), its seasonal distribution, and ecotoxicological health impacts were investigated. For this purpose, a combination of indexing approaches and geospatial methods was used. The estimated water quality index (WQI) has shown that the river water falls under "moderate to very poor" category during the pre-monsoon and "moderate to poor" category in the post-monsoon season. The abundance of PTEs (Pb, Cu, Ni, Cd, Fe, and Cr) was on the higher side during the pre-monsoon in comparison with the post-monsoon season. The results of contamination index (C d ) and heavy metal evaluation index (HEI) explain that Subarnarekha River has low-to-moderate levels of contamination with PTEs in the majority of sampling sites. However, HPI indicated that the river water is moderate-to-highly contaminated with PTEs in both seasons. Principal component analysis (PCA) and cluster analysis (CA) reveal that anthropogenic sources are prime contributors to PTEs contamination in Subarnarekha River. The potential non-cancerous health concerns for child and adults due to Cr and Pb in some sampling stations along the river stretch have been observed. The carcinogenic risk (CR) has been established for Cr, Pb, and Cd in Subarnarekha River with Cr (> 10 -4 ) as the most unsafe element. Monte Carlo simulation (MCS) indicates a high risk of cancer hazards due to Cr (values > 1E-04) in present as well as future for both child and adults., (© 2024. The Author(s), under exclusive licence to Springer Nature B.V.)

Carbon Quantum Dots (CQDs) are already emerged as an excellent sensing element for its exceptional behavior in fluorescence, biocompatibility, and water dispersibility. However, its poor stability, selectivity and reproducibility in complex medium still be a big problem for its practical application. To overcome this, in the work, we have developed a new type of carbon quantum dot-PSS fluorescent nanocomposites which has been used for specific Fe 3+ detection. The polystyrene sulfonate (PSS) polymer not only stabilize the QDs but also produces specific sites for Fe 3+ to make a co-ordinate complex via Fe 3+ -SO3. The detection limit is calculated as low as 1 ppm which is adequate for measuring Fe 3+ in blood or water samples. The mechanism of the quenching is very specific towards the Fe 3+ ion due to the presence of PSS which makes the sensor selective among other metal ions and possible interferences. The rapid process of sensing, simple instrumentation, and excellent performances in presence of 1 % BSA and serum samples indicates the possible application for diagnostic usage in near future., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

Naturally stimulated dynamic ordering-disordering of biomolecules via noncovalent interactions is a commonly occurring phenomenon in biological systems. Herein, we report the effect of induced polarization on the charge carrier dynamics of carbon-quantum-dot-based nano ionic materials (CQD-NIMs) under simulated solar radiation. The solventless liquid-like CQD-NIMs is composed of polystyrenesulfonate (PSS)-passivated CQD as the core-corona system with a polyetheramine (Jeffamine) forming the canopy. The material was observed to behave as a dielectric when placed between two electrodes. Dynamic ordering-disordering of the corona around the CQD surface under induced polarization allowed excess current flow through the solventless material when exposed to simulated solar radiation. Such reversible molecular-assembly-induced photoconducting behavior of the CQDs was characterized with impedance spectroscopy and steady state fluorescence spectroscopy. The concept depicted in the present manuscript may be further developed to design smart light-sensitive molecular switching devices.

Background: Now a days, college students frequently have more complex problems than they used to have over a decade ago - greater difficulties in relationships; and more severe problems, such as depression, anxiety and thoughts of suicide. Counseling helps students to understand themselves and the world around them, and to adjust themselves more efficiently and appropriately to other fellow beings., Aim: To determine as to what extent the medical students were able to cope up with their anxiety and depression with the help of counseling., Materials and Methods: In the experimental design 'Before-and -after with control design', Beck Anxiety Inventory and Beck Depression Inventory were administered to 120 medical students who were randomly selected from a private medical college, comprising of 30 males and 30 females in each of the two groups, viz., the experimental group and the control group., Statistical Analysis: Means, standard deviations, t test and one-way ANOVA were used to analyze the data., Results: Anxiety and depression among the students were found to be reduced after counseling. Male and female students in the experimental group showed decrease in the levels of anxiety and depression; whereas the control group, which did not get the benefit of counseling, continued to have the same levels of anxiety and depression., Conclusion: Counseling is helpful in building self-confidence and the capacity to adjust, by reducing anxiety and depression among medical college students.

We report the shape-controlled synthesis of zinc oxide (ZnO) nanostructures by a poly(vinyl methyl ether) (PVME)-assisted alkaline hydrolysis of zinc acetate at low temperature (20 degrees C). In this method, ZnO nanostructures of various morphologies including dumbbells, lances and triangles have been successfully prepared via a simple variation of different reaction parameters such as polymer concentration, pH of the reaction mixture and precursor concentration. However, without PVME, ZnO of such structurally uniform morphologies were not formed; rather ZnO of a mixture of defined and undefined morphologies were obtained indicating PVME-assisted the growth of such regular shaped ZnO nanostructures. HRTEM analysis of lance- and triangle-shaped samples as well as SAED patterns of all kinds of samples (dumbbell, lance and triangle) revealed that the ZnO nanostrcutures are single crystalline in nature and might form through oriented growth. XRD analysis also revealed the formation of well crystalline ZnO with a hexagonal structure. FTIR spectroscopy and TGA analysis confirmed the adsorption of PVME on the surface of ZnO nanostructures. Being a solvent adaptable polymer, the adsorbed PVME makes these shaped ZnO nanostructures highly dispersible in both polar and non-polar organic solvents including water. The extent of dispersibility in different solvents was studied by spectroscopic and microscopic techniques. Such solvent adoptability of PVME-coated ZnO nanostructures increases its ease of applications in device fabrication as well as in biological systems.

An environmentally friendly one-step wet-chemical approach has been described for controlling the shape of gold nanocrystals at ambient temperature. In this approach, sodium salt of carboxymethyl cellulose (NaCMC) has been used as a reducing-cum-stabilizing agent for the in situ generation of gold nanotapes from an aqueous chloroaurate ion. Transmission electron microscopy confirmed the formation of tape-shaped gold nanostructures. These gold nanotapes exhibited interesting optical properties. The nature of crystallinity of the nanotapes has been studied by X-ray diffractometry. Control experiments with other cellulose derivatives resulted in the formation of only spherical gold nanoparticles.

We report an easy solution phase template-based method to assemble mercaptoundecanoic acid-functionalized gold nanoparticles (MUA-GNPs) along poly(ethylene oxide) (PEO) chains. Transmission electron microscopy (TEM) images show one-dimensional and two-dimensional chain-like sequences of GNPs resembling PEO chains. The progress of the assembly was monitored by the evaluation of surface plasmon resonance band of MUA-GNPs with time by UV-vis spectroscopy. The assembly process is a result of hydrogen bonding interaction between the ethereal oxygen of PEO and carboxylic acid group of MUA attached to GNPs surface, which was confirmed through FTIR spectroscopy. The interaction between PEO and MUA-GNPs was further confirmed by thermal analysis using differential scanning calorimetry.

A simple and easier chemical method for preparing spongy gold nanocrystals has been developed on the basis of a modified-citrate reduction technique of the corresponding gold salt at 25 degrees C in the absence of template. These nanocrystals possessed autocatalytic behavior and exhibited pronounced catalytic activity in the borohydride reduction of 4-nitrophenol due to their unique spongy morphology.

Thermoresponsive gold nanoparticles (GNPs) have been prepared by the borohydride reduction of gold salt in the presence of water-soluble polymer, poly(vinyl methyl ether) (PVME). The PVME-coated GNPs (PVME-GNPs) have been assembled into large aggregates in the presence of polyelectrolytes, viz., poly(sodium-4 styrene sulfonate) and sodium salt of carboxymethylcellulose at low pH by raising the solution temperature from 20 to 40 degrees C. Increase of temperature triggers the interparticle association due to hydrophobic interaction of pendent methyl group of the surface adsorbed PVME. This assembly process is reversible with respect to temperature and pH of the medium and was studied by monitoring the change in surface plasmon resonance band of PVME-GNPs. Three-dimensional assemblies of various architectures, depending on the concentration of polyelectrolytes, were observed through transmission electron microscopy. A mechanistic model has been suggested for the reversible assembly formation that suits well with the experimental observations. The changes in optical properties of the PVME-GNPs due to their aggregation/disaggregation enabled us to use it as an effective tool to monitor the change in lower critical solution temperature (LCST) of PVME in the presence of polyelectrolytes due to interpolymer complexation at low pH. This result agrees well with the variation of LCST of pure aqueous PVME solution in the presence of polyelectrolytes measured by conventional turbidimetric technique.

Synthetic oligopeptides containing redox-active tyrosine residues have been employed to prepare gold and silver nanoparticles. In this reduction process an electron from the tyrosinate ion of the peptide is transferred to the metal ion at basic pH through the formation of a tyrosyl radical, which is eventually converted to its dityrosine form during the reaction. This reaction mechanism was confirmed from UV-visible, fluorescence, and EPR spectroscopy and was found to be pH-dependent. Transmission electron microscopy measurement shows that the average size and the monodispersity of gold nanoparticles increase as the number of tyrosine residues in the peptide increases. The kinetic study, based on spectrophotometric measurements of the surface plasmon resonance optical property, shows that the rate of formation of gold nanoparticles was much faster at higher pH than at lower pH and was also dependent on the number of tyrosine residues present in the peptide. The dityrosine form of the peptide was found to retain reducing properties like those of tyrosine in basic medium.

A novel gold nanoparticle-tripeptide (GNP-tripeptide) conjugate was prepared by peptide in-situ redox technique at ambient temperatureusing a newly designed tripeptide. This new tripeptide was nso designed that it has a C-terminus tyrosine residue, which reduced Au+3 to Au, and the terminally located free amino group was bound to the gold nanoparticle (GNP) surface resulting in highly stable Au colloids. The average diameter of the tripeptide-stabilized GNP is 8.7 +/- 2.3 nm. Tripeptide bound gold nanoparticles formed three-dimensional assemblies in the presence of an excess of similar or disimilar tripeptides. The aggregation of GNPs results in a red shift in the surface plasmon resonance from lambda max = 527 to 556 nm. The effect of the solvent, concentration, and nature of the tripeptides on the assembly process were investigated by TEM and UV-visible spectroscopy.

Water-dispersible gold nanoparticles (GNPs) were synthesized by the polymer in situ redox technique at room temperature using poly(4-vinylphenol) (PVPh) as a simultaneous template/stabilizer and reducing agent. GNPs were characterized by its surface plasmon absorption peak at 536 nm. The average particle size of the gold-poly(4-vinylphenol) (Au-PVPh) nanocomposites decreases with increase in the ratio of PVPh to gold salt. A uniform multilayer of Au-PVPh nanocomposites was fabricated on glass surface by electrostatic layer-by-layer assembly using poly(diallyldimethylammonium chloride) (PDDAC) as the oppositely charged polycation. UV-vis spectra of the consecutive multilayer showed that the absorbance at 549 nm corresponding to GNPs increases linearly with the number of Au-PVPh nanocomposite layers, indicating regular bilayer growth.

Core-shell composite nanoparticles consisting of a gold core and polypyrrole shell were prepared and stabilized with the poly(amidoamine) dendrimer. An in situ redox polymerization technique was used in which pyrrole reduced Au3+ to Au and then oxidized to polypyrrole. The presence of gold nanoparticles as a core was characterized by its surface plasmon absorption peak at 534 nm. Fourier transform infrared spectroscopy confirmed the presence of polypyrrole on the nanoparticle surfaces. The average diameter of the core-shell nanoparticle is 8.7 +/- 1.8 nm with a shell thickness of approximately 1.5-2.0 nm as estimated from the transmission electron microscopy image. Dissolution of the Au core using KCN enabled the formation of hollow polymer nanospheres.