Search

High-purity cellulose from paper pulp can be obtained after appropriate treatments involving pure xylanases and cellulases/endoglucanases. This study investigated the efficacy of using crude xylanase and cellulase instead of commercial ones to improve process economics. Kraft paper grade pulp produced from veneer waste, hardwood, and non-wood sources was utilized as a more sustainable option. Crude xylanase and cellulase from isolated soil bacteria Bacillus pumilus 3GAH and Bacillus subtilis PJK6 were used for process optimization. The correlation between Fock reactivity, chain scission, and crystallinity after crude-cellulase treatment was established through chemical, FTIR, and XRD analyses. Pentosans in kraft pulp were reduced from an initial 18.7% to 4.9% through sequential treatments with crude xylanase and alkali. Subsequent crude-cellulase treatment, even at 8 U/g o.d. pulp, improved Fock reactivity from 28.2% to 61.2%, fulfilling a major criterion for viscose. Thus, crude enzymes can be effectively used for the efficient and economical upgrading of paper pulp to dissolving pulp., Competing Interests: Conflict of interestThe authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (© King Abdulaziz City for Science and Technology 2024. Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.)

Bacterial nanocellulose was produced here using static, static intermittent-fed batch (SIFB) and rotary disc bioreactor (RDB) mode. Economical black tea broth media with symbiotic consortia of bacteria and yeast (SCOBY) was used towards feasible BNC production (instead of commercial NCIM 2526 strain and conventional HS media). The physicochemical characterization of BNC produced in all three modes via FE-SEM, ATR-FTIR, XRD and TGA results showed a highly porous morphology, mostly Iα form, good crystallinity and thermal stability, respectively. BNC crystallinity lies in the range of 68 % (RDB) to 79.4 % (static and SIFB). Water retention value (86 to 93 %) and moisture content (85 to 93 %) are high for BNC produced in all three modes. Commendable difference in the BNC yield, sugar consumption, conversion yield and residual sugar was observed using different methods. Highest BNC yield 29.4 ± 0.66 gL -1 was obtained under SIFB method as compared to static mode (13.6 ± 0.32 g L -1 ). Under RDB, a negligible amount of BNC i.e., 1.0 ± 0.2 g L -1 was produced. SCOBY with BTB medium was found unsuitable for BNC production under RDB and needs further investigation. Thus, this comparative study offers a way to produce a commendable amount of low-priced BNC for various techno-industrial usage., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

This study reports the cellulo-xylanolytic cocktail production from Hypocrea lixii GGRK4 using multi-objective genetic algorithm-artificial neural network tool, resulting in 8.32 ± 1.07 IU/mL, 51.53 ± 3.78 IU/mL activity of CMCase and xylanase, respectively with more than 85 % residual activity at 60 °C and pH 6.0. Interestingly, metal ions viz. K + and Ca 2+ stimulated the enzyme activity, whereas Fe 2+ and Cu 2+ reduced the activity. Significant amounts of hydrophobic compounds, chromophores, and phenolics were released after wastepapers deinking. The deinking efficiency of 73.60 ± 2.45 % and 38.60 ± 1.34 % was obtained for photocopier paper and newspaper, respectively, whereas brightness of 89.90 ± 2.10 % ISO and 44.90 ± 1.63 % ISO was reported for both types of waste papers. The physical strength of deinked photocopier paper and newspapers, i.e., tensile index (3.10 and 0.50 %), tearing index (7.10 and 4.83 %), and burst factor (8.61) were enhanced whereas double fold property was decreased proving wastepaper reusability. This consortium showed effective and significant enzymatic deinking efficiency for recycled wastepapers., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Wolfram syndrome type 1 is a rare autosomal recessive genetic disorder which is characterized by the co-existence of diabetes insipidus, diabetes mellitus, optic atrophy, and deafness, and hence is also referred to as the acronym DIDMOAD. In this neuroimage, the typical neuroimaging features of a genetically confirmed case of Wolfram syndrome type 1 are presented. The presence of left-sided vestibulocochlear dysplasia is a novel finding in our case which has not been reported previously., (© 2024. Fondazione Società Italiana di Neurologia.)

Background: Early skin-to-skin contact (SSC) at birth has been shown to improve neonatal outcomes due to enhanced cardiorespiratory stability, thermoregulation and breastfeeding success., Local Problem: The practice of early SSC was virtually non-existent in our delivery room (DR)., Methods and Interventions: The study was conducted in a newly established tertiary care teaching hospital in Western Rajasthan, India. We aimed to improve the median duration of early SSC from 0 min to at least 60 min over 24 weeks in our DR. A quality improvement (QI) team was formed, and all inborn infants ≥35 weeks born vaginally from 9 March 2017 were included. Using the tools of point-of-care QI, we found the lack of standard operating procedure, lack of knowledge among nursing staff regarding early SSC, routine shifting of all infants to radiant warmer, the practice of prioritising birthweight documentation and vitamin K administration as the major hindrances to early SSC. Various change ideas were implemented and tested sequentially through multiple plan-do-study-act (PDSA) cycles to improve the duration of early SSC. Interventions included framing a written policy for SSC, sensitising the nursing staff and resident doctors, actively delaying the alternate priorities, making early SSC a shared responsibility among paediatricians, obstetricians, nursing staff and family members, and continuing SSC in the recovery area of the DR complex., Results: The duration of early SSC increased from 0 to 67 min without any additional resources. The practice of SSC got well established in the system as reflected by a sustained improvement of 63 min and 72 min, respectively, at the end of 2 months and 4 years after study completion., Conclusion: Using the QI approach, we established and sustained the practice of early SSC for more than 60 min in our unit by using system analysis and testing change ideas in sequential PDSA cycles., Competing Interests: Competing interests: None declared., (© Author(s) (or their employer(s)) 2024. Re-use permitted under CC BY-NC. No commercial re-use. See rights and permissions. Published by BMJ.)

The present study reports the combined enzymatic production efficiency of thermophilic fungus Thermomyces lanuginosus VAPS25 using a combinatory artificial intelligence-based tool, resulting in 2.7 IU/ml, 5.2 IU/ml, and 18.85 U/ml activity of endoglucanase, amylase, and lipase, respectively with good thermostability at 90 °C (pH 8-10). Interestingly, the metal ions viz. Cu 2+ and Mg 2+ increased the endoglucanase activity to 5 folds, i.e.,5.6 IU/ml compared to control. Further, the amylase and lipase activity was also enhanced by Fe 2+ and Co 2+ to 5.4 IU/ml and 19.57 U/ml, respectively. Additionally, the deinking efficiency was improved by 68.9%, 42.7%, and 52.8% by endoglucanase, amylase, and lipase, respectively, while the consortium increased the deinking efficiency to 72.7%. The bio-bleached paper strength parameters such as burst index, breaking length, tear index, and tensile index of sheets were significantly improved by 1.38%, 13.54%, 7.54%, and 20.88%, respectively. These enzymes at an industrial scale would help develop an economical paper recycling process., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

The potential of alkaline cellulo-xylanolytic enzymes from non-pathogenic Bacillus subtilis strain was tested for deinking of photocopier waste paper. Cellulase and xylanase play a crucial role in deinking of different types of waste paper. Partial purification of cellulo-xylanolytic enzymes was carried out using ultrafiltration followed by ammonium sulfate precipitation. The ultrafiltered enzyme was used for deinking the photocopier waste paper along with chemical deinking. An enzyme dose of 0.6 IU/g and reaction time of 60 min for ultrafiltered cellulo-xylanolytic enzyme significantly increased deinking efficiency, tear index (9.52%) and folding endurance (5±2%) as compared to chemical deinking. There was improvement in strength properties such as tear index and double-fold along with freeness of pulp (18%). There was slight decrease in tensile index (0.6%) and burst index (16%) while ISO brightness remained unaffected. Enzymatic deinking (74.3%) by ultrafiltered cellulo-xylanolytic from Bacillus subtilis was found significant over conventional chemical deinking., (© 2021. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Background: Neurodegeneration with brain iron accumulation (NBIA) is a group of rare inherited neurodegenerative disorders. Ten types of NBIA are known. Studies reporting various NBIA subtypes together are few. This study was aimed at describing clinical features, neuroimaging findings, and genetic mutations of different NBIA group disorders., Methods: Clinical, radiological, and genetic data of patients diagnosed with NBIA in a tertiary care centre in Southern India from 2014 to 2020 was retrospectively collected and analysed., Results: In our cohort of 27 cases, PLA2G6-associated neurodegeneration (PLAN) was most common (n = 13) followed by Pantothenate kinase-associated neurodegeneration (PKAN) (n = 9). We had 2 cases each of Mitochondrial membrane-associated neurodegeneration (MPAN) and Beta-propeller protein- associated neurodegeneration (BPAN) and 1 case of Kufor-Rakeb Syndrome (KRS). Walking difficulty was the presenting complaint in all PKAN cases, whereas the presentation in PLAN was that of development regression with onset at a mean age of 2 years. Overall, 50% patients of them presented with development regression and one-third had epilepsy. Presence of pyramidal signs was most common examination feature (89%) followed by one or more eye findings (81%) and movement disorders (50%). Neuroimaging was abnormal in 24/27 cases and cerebellar atrophy was the commonest finding (52%) followed by globus pallidus hypointensities (44%)., Conclusions: One should have a high index of clinical suspicion for the diagnosis of NBIA in children presenting with neuroregression and vision abnormalities in presence of pyramidal signs or movement disorders. Neuroimaging and ophthalmological evaluation provide important clues to diagnosis in NBIA syndromes., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper. Case one of Mitochondrial membrane-associated neurodegeneration and case of Kufor-Rakeb Syndromes are published as case report/letter to editor in Indian Journal of Pediatrics., (Copyright © 2021 The Japanese Society of Child Neurology. Published by Elsevier B.V. All rights reserved.)

Chitosan is a renewable biopolymer which can be applied on the surface of writing and printing (W&P) grade paper to enhance its different properties. A variety of chitosan is available based on degree of acetylation (DA), molecular weight, viscosity, etc. DA has a profound effect on the performance of chitosan in many applications. Present study compared the performance of different DA chitosan for surface application of W&P grade paper. Chitosan samples of 23 %, 16 % and 6% DA were studied for their impact on various physical and surface properties of W&P grade paper. Surface coating of chitosan was done at 1.6 ± 0.2 g/m 2 (lower dose) and 2.3 ± 0.3 g/m 2 (higher dose) on W&P grade paper. Some properties including air permeance, TEA, showed considerable effect of DA in which high DA chitosan outperformed the low DA. Broadly, chitosan with different DA had varied impact on individual properties of paper., (Copyright © 2021. Published by Elsevier Ltd.)

Cellulose is the most abundant renewable resource which has found a diverse range of applications. Cellulose dissolution is a significant property for manufacturing man-made cellulosic fiber through viscose process. Crystalline microfibrillar structure and relatively high ordered packing of polymeric chains contribute to recalcitrance and poor reactivity of cellulose. One of the most common methods to improve cellulose dissolution is cellulase treatment. Herein, cellulase treatment at different doses was studied to explore the correlation of cellulose dissolution with crystallinity. Pulp showed improvement in Fock reactivity and other properties related to viscose application. But contrary to previous studies, cellulose crystallinity as determined by XRD and FTIR did not correlate with Fock reactivity at a higher dose of cellulase. The results indicated some complex mechanism to be involved between the cellulose dissolution and crystallinity than a simple negative correlation. Cellulase treatment at 150 HCU/g resulted in the upgraded pulp suitable for viscose application., Competing Interests: Conflict of interestThe authors have no conflicts of interest to declare that are relevant to the content of this article., (© King Abdulaziz City for Science and Technology 2021.)

Bio-bleaching effect on bagasse pulp using xylano-pectinolytic enzymes produced by a bacterial species was studied in order to evaluate the potential of these enzymes in paper industry. In this study, action of enzymes was maximum with xylanase/pectinase dose 7/1.75 IU/g, pulp consistency 1:12.5 g/L, pH 8.5, temperature 50° C and 180 min of treatment time. Under the optimized bio-bleaching conditions, removal of reducing sugars (6.15±0.05 mg/L), brightness (16.08%), whiteness (25.54%) and release of chromophores (hydrophobic and phenolic compounds and lignin impurities) were maximum, along with decrease in kappa number (26.28%), and yellowness (27.88%) values were obtained. Improvement in the various physical properties like breaking length (10.28%), burst index (29.55%), tear index (5.02%), double fold (14.89%), Gurley porosity (15%) and viscosity (8.6%), along with the reduction of chlorine dioxide dose by 27%, was also observed. There is also reduction in COD and BOD values of bio-bleached effluents by 27.62% and 20.52%, respectively. This is the first report on bio-bleaching of bagasse pulp using xylano-pectinolytic enzymes., (© 2021. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Alternating hemiplegia of childhood (AHC) is a rare autosomal dominant neurodevelopmental disorder with mutation on ATP1A3 gene. Delay in diagnosis and inappropriate diagnosis are common. In this article, we described four genetically confirmed AHC patients to provide an improved understanding of the disorder. First symptom in two patients was seizures and in other two patients was abnormal eye deviation. All had onset of plegic attacks within the first 18 months of their life. Tone abnormalities and movement disorders were present in all patients. Electroencephalogram was abnormal in two patients and all had normal magnetic resonance imaging of the brain. Response to treatment of plegic attacks was poor and also epilepsy was drug resistant. All cases had significant development delay and disability as of last follow-up. Although there is no effective treatment so far, early diagnosis is required to avoid unnecessary treatment., Competing Interests: Conflict of Interest None declared., (Thieme. All rights reserved.)

Sugarcane bagasse (SB) and sugarcane trash (SCT) containing 30% hemicellulose content are the waste from the sugarcane industry. Hemicellulose being heterogeneous, more complex, and less abundant than cellulose remains less explored. The optimized conditions for the pretreatment of SB and SCT for maximizing the delignification are soaking in aqueous ammonia (SAA), 18.5 wt %, followed by heating at 70 °C for 14 h. The optimization of hydrolysis of SAA pretreated (ptd) SB and SCT by the Box-Behnken design in the first step of saccharification by xylanase ( Ct Xyn11A) and α-l-arabinofuranosidase ( Ps GH43_12) resulted in the total reducing sugar (TRS) yield of xylooligosaccharides (TRS (XOS) ) of 93.2 mg/g ptd SB and 85.1 mg/g ptd SCT, respectively. The second step of saccharification by xylosidase ( Bo GH43) gave the TRS yield of 164.7 mg/g ptd SB and 147.2 mg/g ptd SCT. The high-performance liquid chromatography analysis of hydrolysate obtained after the second step of saccharification showed 69.6% xylan-to-xylose conversion for SB and 64.1% for SCT. This study demonstrated the optimization of the pretreatment method and of the enzymatic saccharification by recombinant xylanolytic enzymes, resulting in the efficient saccharification of ptd hemicellulose to TRS by giving 73.5% conversion for SB and 71.1% for SCT. These optimized conditions for the pretreatment and saccharification of sugarcane waste can also be used at a large scale., Competing Interests: The authors declare no competing financial interest., (© 2021 The Authors. Published by American Chemical Society.)

The objective of this study was to check the potential of crude xylano-pectinolytic enzymes in bleaching of rice straw pulp, in order to reduce the toxic waste load for managing the environmental pollution. The xylano-pectinolytic enzymatic bleaching step for delignification was found to be most effective at pulp consistency 1:10 g/ml, xylanase:pectinase dose of 9:4 IU/ml, pH 8.5 and treatment time 180 min at temperature of 55 °C, and resulted in lowering of kappa number of the rice straw pulp by 15.29%. In subsequent bleaching stages, this enzymatic pre-bleaching treatment also resulted in 30% reduction of active chlorine dioxide dose without any loss of optical properties. Significant improvement in various physical properties of the enzymes treated pulp, tear index (15.43%), breaking length (11.11%), double fold number (25.92%), burst index (9.88%) and viscosity (13.63%), and Gurley porosity (39.86%) was also noticed. This approach resulted in reduction of BOD and COD values by 21.07% and 26.57%, respectively. This is the first study on the use of crude xylano-pectinolytic enzymes for bio-bleaching of rice straw pulp.

Ternary nano-biocomposite films of bacterial cellulose-chitosan-gelatin (BC-C-G) were fabricated by immersing the BC pellicles into chitosan and gelatin mixture and subsequently freeze-drying. Scanning electron microscopy (SEM) images of the nano-biocomposite films revealed the presence of interconnected pores, with fibre diameter 20-150 nm. The composite films have a porosity of 95.3%, and showed good hydrophilicity with swelling ratio of 19 ± 1.8 and in vitro degradability. X-ray diffraction, attenuated total reflectance Fourier transform infrared spectroscopy, and thermogravimetric (TG) analysis results showed some interactions among the molecules of BC, gelatin, and chitosan within the film. The composite film offered good matrix for adhesion and proliferation of L929 fibroblasts cells as indicated by the cell attachment study, FE-SEM of cell-film constructs and cytocompatibility assay. Thus, the nano-biocomposite films of BC-C-G could be of paramount importance as tissue engineering scaffold. The "all-natural" ternary polymer composite films of BC-C-G have not been evaluated before for biomedical applications.

In this study, action of ultrafiltered xylano-pectinolytic enzymes from a bacterial strain has been evaluated for bleaching of rice straw soda-anthraquinone pulp. Maximum bio-bleaching effect and release of non-cellulosic impurities were noticed with xylano:pectinolytic enzymes dose of 6.0:2.1-IU/g pulp, treatment time of 180 min at 10% pulp consistency, pH 8.5, and temperature 55 °C. Microscopic images of bio-bleached rice straw pulp also confirmed the efficacy of ultrafiltered enzymes, as bleaching agent. This bio-bleaching treatment resulted in 15.38% and 32% reduction in kappa number and active chlorine dioxide dose, respectively, along with increase in various physical properties, burst index (12.50%), tear index (19.07%), breaking length (14.30%), double fold number (26.31%), Gurley porosity (45.32%) and viscosity (16.17%). This bio-bleaching approach not only improved the pulp quality but also reduced environmental pollution load by decreasing effluent parameters values of BOD and COD by 23.67% and 27.44%, respectively. This study indicates that use of ultrafiltered xylano-pectinolytic synergism for rice straw pulp bleaching will ultimately help in making the process eco-friendly, along with better quality pulp. This is the first report on use of ultrafiltered xylanase and pectinase, produced from a bacterial isolate, for bleaching of rice straw pulp.

This research was carried out with an objective to examine the efficacy of ultrafiltered xylano-pectinolytic enzymes in pulping of sugarcane bagasse. Maximum biopulping was achieved with enzyme dose of xylanase (175 IU / g bagasse) and pectinase (75 IU / g bagasse) at treatment period of 180 min. The temperature, pH, and bagasse to liquid ratio for biopulping experiments were kept constant at 55 o C, 8.5, and 1:10 (g/ml), respectively. The ultrafiltered biopulping improved chemical pulping, resulted in 25.11%, 9.17% increase in brightness, unscreened pulp production and 11.81, 59.50, and 49.14% decrease in total solids, rejections. and kappa number, respectively. The bagasse biopulping also resulted in 15% decrease of alkali load to attain similar kappa number and optical properties as obtained under 100% alkali dosage. Ultrafiltered biopulped-unbleached samples showed significant increase in breaking length (13.55%), burst index (40.21%), tear index (19.04%), double fold (42.5%), Gurley porosity (28.21%) and viscosity (13.37%) in comparison with non-enzymatically treated control pulp samples. In comparison with non biotreated-bleached pulp samples, ultrafiltered biopulped-bleached samples also resulted in higher burst index (56.80%), breaking length (17.38%), double fold (39.58%), tear index (3.38%), viscosity (30.68%), and Gurley porosity (52.50%). This environmentally sustainable ultrafiltered biopulping approach for sugarcane bagasse has the potential to decrease the demand of chemicals, ultimately pollution along with enhance the quality of paper.

In this study, suitability of xylano-pectinolytic enzymes in pulping of wheat straw has been explored. The suitable biopulping conditions were optimized, with xylanase dose of 400 and pectinase dose of 120 IU/g wheat straw, 1:10 (g/ml) material to liquid ratio, 55 °C temperature, 3 h treatment time, 0.75% Tween 80 and pH 8.5. Enzymatic pretreatment efficiently increased the pulpability of wheat straw, generated pulp with higher yield, lower kappa number (15.67%) and rejections (59.65%) in comparison with chemical pulp. The brightness of pretreated wheat straw pulp with enzyme was 16.04% higher than that of the non-enzyme treated wheat straw pulp. The biopulping resulted in 12% reduction of pulping chemicals along with more residual alkali content, in order to achieve similar optical and chemical properties as obtained by 100% chemically treated pulp. Physical properties of pulp also improved after enzymatic pretreatment, increasing burst index (26.50%), tear index (18.22%) and breaking length (5.56%). The enzyme plus chemical (88% pulping chemicals) treated pulp showed improvement in brightness and whiteness, with reduction in yellowness at all bleaching stages. In comparison with chemically bleached pulp, biopulp with reduced alkali dose (88%) had higher breaking length (6.63%), double fold number (51.28%), tear index (2.83%), burst index (24.31%), along with increased viscosity (6.12%) and Gurley porosity (27.50%). These results clearly suggest that biopulping of wheat straw with xylano-pectinolytic enzymes can reduce chemical loading during soda-anthraquinone pulping and also improve the quality of paper. This is the first report demonstrating the biopulping of wheat straw using crude xylano-pectinolytic enzymes.

Micro-nanofibrillated cellulose was prepared using bleached mixed hardwood pulp by a low energy consuming chemo-refining approach having potential to be implemented easily in paper industry. Bleached mixed hardwood pulp was pretreated with sodium meta-periodate and sodium chlorite and micro-nanofibrillated by using refining in Valley beater. Scanning electron microscopy images of prepared micro-nanofibrillated cellulose showed 87 % fibre distribution in nano range, 4.47 ± 0.5 g/g water retention value and 2.13 ± 0.1 meq/100 g carboxyl content. Carboxylation effect of given chemical pretreatment was further confirmed by FTIR analysis. Paper handsheets, having bleached mixed hardwood pulp and prepared micro-nano-fibrillated cellulose, resulted in about 5% lower bulk with 27 %, 32 % and 87 % higher breaking length, burst factor and double fold, respectively than control (without nano-fibrillated cellulose). Prepared micro-nanofibrillated cellulose addition didn't show negative effect on pulp drainability (33 °SR). This work showed that micro-nanofibrillated cellulose might also be prepared using conventional routes of paper industry to improve paper properties., Competing Interests: Declaration of Competing Interest None., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

Cellulosic fiber is hydrophilic in nature and making it hydrophobic represents a process called sizing in papermaking. Alkenyl succinic anhydride (ASA) sizing is dominating over other sizing processes due to its high reactivity and economy. The shelf life of conventionally used cationic starch (CS) stabilized ASA emulsion is 20-25 min. In our previous study, the ASA emulsion was found to be stable up to 4 h using anionic polyacrylamide (APAM) as stabilizer. Present communication was aimed to utilize, the APAM stabilized ASA emulsion with most commonly utilized cellulosic pulps (mixed hardwood, bagasse and recycled) and fillers to assist its commercial utilization in papermaking. APAM stabilized ASA emulsion facilitated back water utilization with improved sizing degree unlike CS based ASA emulsion. Lower amount of ASA sizing was required in bagasse pulp compared to other pulps which might be attributed to low crystallinity ratios and hydrogen bond energy., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

This study explores the modification of bacterial nanocellulose (BNC), produced in fermented tea medium with bio-extracts from herbal plants, to produce entirely natural antibacterial nanocellulose films. The antibacterial property was imparted by impregnating the synthesized BNC into bio-extracts of Terminalia arjuna (arjuna), Azadirachta indica (neem), Withania somnifera (ashwagandha), Tinospora cordifolia (giloy), and Murraya koenigii (curry leaves). FE-SEM analysis of modified BNC films revealed the presence of cloudy layer of bio-extracts over the BNC nanofibrous network. The modified BNC production was confirmed by ATR-FTIR. The modified BNC showed tremendous antibacterial activity against Escherichia coli (E. coli) and Aerococcus viridians (A. viridans). T. arjuna modified BNC showed the highest antibacterial activity against E. coli and A. viridans with inhibition zone of 27.08 mm and 26.34 mm, respectively, while M. koeniggi modified BNC showed the lowest antibacterial activity for both E. coli and A. viridans with inhibition zone of 14 mm and 14.2 mm, respectively. The water retention, moisture content and porosity values reflect highly hydrophilic nature of BNC films and their well suitability for varied biomedical applications like antibacterial wound dressings, herbal biomasks, scaffoldings, etc. The modification of BNC films with the bio-extracts used in this study has not been reported previously., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Six elemental chlorine-free bleaching sequences were studied to see their effect on quality of pulp produced and quantity of pollutants generated during bleaching of wheat straw soda pulp. Impact of parameters like adsorbable organic halogens (AOX), chemical oxygen demand (COD), biochemical oxygen demand (BOD) and sodium adsorption ratio, pH and total dissolved solids generated during bleaching on environment as index of global pollution (I GP ) was also studied. The purpose of the study was to investigate six elemental chlorine-free bleaching sequences to compare the pulp quality, effluent properties and their impact on environment. An oxygen delignification stage before D 0 E OP D bleaching sequence reduced the AOX, COD, colour and BOD by 44%, 42%, 36% and 33%, respectively, whereas an ozonation stage before bleaching reduced the same by 70%, 66%, 73% and 60%, respectively, as compared to those of control. The generation of pollutants as AOX, COD, colour and BOD was reduced further by 88%, 80%, 90% and 77%, respectively, with the use of short bleaching sequences (DD, DP and PD) as compared to those of control. The environmental impact as I GP with D 0 E OP D bleaching sequence was 2.65 which got reduced to 1.44 with bleaching sequence OZPD. Bleaching sequence OZD 0 E OP D was found the most effective for improving brightness and whiteness of the pulp, whereas short bleaching sequence OZPD found the most effective for reducing generation of pollutants during bleaching among different bleaching sequences studied. Graphical abstract.

Nanocellulose has achieved an inimitable place and value in nano-materials research sector. Promising and exclusive physical, chemical and biological properties of nanocellulose make it an attractive and ideal material for various high end-user applications. Conventionally, the base material for nanocellulose i.e. cellulose is being extracted from various lignocellulosic raw materials (like wood, agro-industrial-residues, etc.) using pulping followed by bleaching sequences. As an alternate to lignocellulosic raw materials, waste paper also showed potential as a competent raw material due to its abundant availability and high cellulosic content (60-70%) with comparatively less hemicelluloses (10-20%) and lignin (5-10%) without any harsh treatments. The production yields of nanocellulose were reported to vary from 1.5% to 64% depending upon the waste papers and treatments given. The diameters of these nanocelluloses were reported in the range of 2-100 nm and crystallinity range around 54-95%. Thermal degradation of waste paper nanocellulose was varied from 187 °C to 371 °C. Although these properties are comparable with the nanocellulose obtained from lignocellulosic raw materials, yet waste paper is an underutilized source for nanocellulose preparation due to its ordinary fate of recycling, dumping and incineration. In the sight of necessity and possibility of waste paper utilization, this article reviews the outcomes of research carried out for preparation of nanocellulose using waste paper as a source of cellulose. There is a need of sincere investigation to convert this valuable waste to wealth i.e. waste papers to nanocellulose, which will be helpful in solid waste management to protect environment in economical way., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

Bacterial nanocellulose (BNC) has emerged as a natural biopolymer of significant importance in diverse technological areas due to its incredible physicochemical and biological characteristics. However, the high capital investments, production cost and lack of well-organized scale-up processes resulting in low BNC production are the major impediments need to be resolved. This review enfolds the three different and important portions of BNC. Firstly, advancement in production technologies of BNC like cell-free extract technology, static intermittent fed batch technology and novel cost-effective substrates that might surmount the barriers associated with BNC production at industrial level. Secondly, as BNC and its composites (with other polymers/nanoparticles) represents the utmost material of preference in current regenerative and diagnostic medicine, therefore recently reported biomedical applications of BNC and functionalized BNC in drug delivery, tissue engineering, antimicrobial wound healing and biosensing are widely been focused here. The third and the most important aspect of this review is an in-depth discussion of various pitfalls associated with BNC production. Recent trends in BNC research to overcome the existing snags that might pave a way for industrial scale production of BNC thereby facilitating its feasible application in various fields are highlighted., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Bacterial nanocellulose (BNC), a natural origin biopolymer with multi-dimensional applications has captured a great deal of attention owing to its implausible properties. However, low yield of BNC accompanied with high production cost is challenging its usage in various technological applications. In this study, BNC production has been reported utilizing fermented black tea broth brewed from fresh tea leaves (FBTB F ) as well as from used tea leaves (FBTB U ) as a cost-effective and high-quality BNC yielding medium. The symbiotic combination of bacteria and yeasts (SCOBY) was exploited here to bring fermentation in tea broth. The production yields on dry weight basis were 13.3 g L -1 in FBTB F and 12.8 g L -1 in FBTB U , obtained with 60 g L -1 of glucose in 20 days. The conversion yields of 0.32 and 0.31 g BNC/g sugar were obtained with both the tea broths. The study of produced pellicle using ATR-FTIR, FE-SEM and XRD confirmed its structural, morphological and chemical nature similar to that of BNC. Thus, fermented black tea broth appears to be a potential medium for BNC production. The use of fermented tea broth for the industrial scale production of BNC might significantly reduce its production cost., (Copyright © 2019 Elsevier B.V. All rights reserved.)

The pulp and paper industry is highly dependent on forest and water resources. It has more concerns on fair utilization of these resources and their conservation for its further expansion. Present study emphasizes on the use of rice straw (agro waste) in papermaking to protect wood based resources. It further deals with ozone bleaching (Z) prior to elemental chlorine free bleaching that proved to be significant in terms of reducing the effluent load specially the reduction in toxic, recalcitrant and carcinogenic compounds. Z based sequences resulted in pulp brightness of ∼85% that was 3.6% higher than the elemental chlorine free bleaching. Bleached pulps of Z based sequences were found to be having better strength properties than elemental chlorine based sequence and thus may be adopted as improved bleaching technology. The analysis of handsheets prepared after pulp bleaching was performed using X-Ray diffraction, ATR-FTIR and SEM. Incorporating ozone stage resulted in marked reduction of 58% and 63% in total solids in bleaching wastewater. Reduction of more than 80% in BOD, COD and adsorbable organic halides was achieved in Z based bleaching in comparison to chlorine bleaching. The amount of chlorophenols, guaiacols, catechols, vanillins and syringols became negligible (approx. 90% reduction) in effluents of Z based bleaching sequences. The chlorine dioxide followed by peroxide bleaching after Z stage was found to be the most promising to reduce the effluent load., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

To improve the process economy of reactivity improvement, crude cellulase from Bacillus subtilis was employed for the treatment and significant dissolving pulp properties were analyzed. With increase in enzyme dose from 0.25 to 2 U/g o.d. pulp, improvement in Fock reactivity and alkali solubilities (S10 and S18) were observed with simultaneous reduction in viscosity and yield. Fourier transform infrared spectroscopy and scanning electron microscopy were used to observe the molecular level effects on dissolving grade pulp. The most suitable cellulase dose for reactivity improvement with lowering of viscosity was 0.25 U/g o.d. pulp. With increases in enzyme dose, alkali solubilities (S10 and S18) of dissolving pulp showed continuous increment, while alpha-cellulose of pulp showed reduction due to chain scission of long cellulose fiber fraction., Competing Interests: Compliance with ethical standardsThe authors declare that they have no conflict of interest.

A gram positive, rod shaped, bacterium was isolated from pulp and paper mill sludge and characterized as Brevibacillus parabrevis (MTCC 12105) by biochemical tests and 16S rRNA gene sequencing. C D and E OP stage wastewater, collected from a leading pulp and paper mill situated in North India, was used for degradation study. Wastewater degradation efficiency of the bacterial isolate was evaluated by Flask study in batch mode and Reactor study in semi continuous mode. The isolated bacterium showed a considerable reduction of the colour (59%), chemical oxygen demand (62%) and lignin (53.8%) content of Kraft paper mill effluent at 37 °C after 5 days. During reactor study it reduced 42.6% Lignin, 51.6% Colour and 60.3% COD (chemical oxygen demand) of the wastewater at 48 h RT (retention time). The isolate was deposited at MTCC Chandigarh, India with an accession no. MTCC 12105.

Environmental degradation by industrial and other developmental activities is alarming for imperative environmental management by process advancements of production. Pulp and paper mills are now focusing on using nonwood-based raw materials to protect forest resources. In present study, rice straw was utilized for pulp production as it is easily and abundantly available as well as rich in carbohydrates (cellulose and hemicelluloses). Soda-anthraquinone method was used for pulp production as it is widely accepted for agro residues. Bleaching process during paper production is the chief source of wastewater generation. The chlorophenolic compounds generated during bleaching are highly toxic, mutagenic, and bioaccumulative in nature. The objectives of study were to use oxygen delignification (ODL) stage prior to elemental chlorine-free (ECF) bleaching to reduce wastewater load and to study its impact on bleached pulp characteristics. ODL stage prior to ECF bleaching improved the optical properties of pulp in comparison to only ECF bleaching. When ODL stage was incorporated prior to bleaching, the tensile index and folding endurance of the pulp were found to be 56.6 ± 1.5 Nm/g and 140, respectively, very high in comparison to ECF alone. A potential reduction of 51, 57, 43, and 53% in BOD 3 , COD, color, and AOX, respectively was observed on adding the ODL stage compared to ECF only. Generation of chlorophenolic compounds was reduced significantly. Incorporation of ODL stage prior to bleaching was found to be highly promising for reducing the toxicity of bleaching effluents and may lead to better management of nearby water resources. Graphical abstract ᅟ.

We report a previously healthy 16-month-old child who presented to us with membranous pharyngitis and ecthyma gangrenosum. In this patient, Pseudomonas aeruginosa was isolated from throat swab, cerebrospinal fluid, skin swab, urine, blood and synovial fluid in a single admission. In further workup, this child was diagnosed as a case of X-linked agammaglobulinaemia. The child was treated successfully with antipseudomonal antibiotics for 6 weeks and intravenous immunoglobulin., Competing Interests: Competing interests: None declared., (© BMJ Publishing Group Ltd (unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.)

Pulp and paper mills are indispensable for any nation as far as the growth of the nation is concerned. Due to fast growth in population, urbanization and industrialization, the demand and consumption of paper has increased tremendously. These put high load on our natural resources and force the industry to look for alternative raw material. Rice straw is a lignocellulosic material abundantly available in wood short countries like China, India, Bangladesh, etc. and can be used as raw material for this industry. Open burning of rice straw releases noxious green house gases to the air and poses serious threats to global air chemistry and human health. So, it is a dual benefit option (for farmers and industries) to use rice straw as a raw material in pulp and paper industry. Organosolv pulping using acids are the prominent choices of researchers to convert this residue into valuable pulp but in developed countries only. Developing world favours the soda and soda-AQ processes as these are economical. As a virtue of less lignin content in comparison to wood, rice straw requires less harsh conditions for cooking and can be easily pulped. Bleaching is a crucial step of paper making but also responsible for causing water pollution. Many studies revealed that during the process more than 500 chlorinated compounds are released that are highly toxic, bioaccumulative and carcinogenic in nature. Most of the industries over the globe switch on to the elemental chlorine free short sequence bleaching methods using chlorine dioxide, hypochlorite and hydrogen peroxide. This paper presented the effective need of ecofriendly, economically reliable pulping and bleaching sequences in case of rice straw to eliminate the problems of chlorinated compounds in wastewater of paper mills. Such approach of using waste as a raw material with its environmentally safe processing for making paper can prove to be valuable towards sustainable growth., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

The upturn of viscose fiber market has triggered an augmented dissolving pulp usage over the last decade. Dissolving pulp is feasible to obtain from kraft pulp after two essential steps including hemicellulose removal and subsequent pulp activation. Prerequisite of conversion being hemicellulose reduction can be gently done by using xylanase treatment prior to alkali extraction. Herein, the significance of xylanase treatment and the optimum xylanase dose required in conjunction with subsequent alkali extraction was investigated. An increase in xylanase dose prior to alkali extraction had no significant effect on pentosans while the Fock reactivity and viscosity both improved at the dose of 50AXU/g. Also, alkali extraction without xylanase pretreatment resulted in decreased Fock reactivity, alpha cellulose, brightness and viscosity of paper grade pulp. A moderate dose of xylanase prior to alkali extraction can thus be used to facilitate the hemicellulose removal while simultaneously protecting the native structure of cellulose., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

This paper implies production of cellulase and xylanase enzyme using a potent strain of Trichoderma harzianum for the efficient deinking of photocopier waste papers. Different nutritional and environmental factors were optimized for higher production of cellulase along with xylanase. After fermentation, maximum enzyme extraction was achieved from fermented matter using a three-step extraction process with increased efficiency by 26.6-29.3 % over single-step extraction. Static solid state was found as the best fermentation type using wheat bran (WB) as carbon source and ammonium ferrous sulfate (0.02 M) as nitrogen source. Subsequently, inoculum size (8 × 10(6) CFU/gds), incubation days (4 days), temperature (34 °C), initial pH (6.0), and moisture ratio (1:3) significantly affected the enzyme production. Cellulase and xylanase activities were found to be maximum at pH 5.5 and temperature 55-60 °C with good stability (even up to 6 h). Furthermore, this crude enzyme was evaluated for the deinking of photocopier waste papers without affecting the strength properties with improved drainage as an additional advantage. The crude enzyme-deinked pulp showed 23.6 % higher deinking efficiency and 3.2 % higher brightness than chemically deinked pulp. Strength properties like tensile, burst indices, and folding endurance were also observed to improve by 6.7, 13.4, and 10.3 %, respectively, for enzyme-deinked pulp. However, the tear index was decreased by 10.5 %. The freeness of the pulp was also increased by 21.6 % with reduced drainage time by 13.9 %.

This work studied the influence of refining on various pulp properties such as freeness, specific surface area, specific volume, water retention value, surface charge, total charge and tensile index of five different pulps. At a freeness level the wheat straw pulp exhibited higher surface charge and total charge compared to other pulps. The specific surface area, specific volume and water retention value of the pulps increased with increased refining. The total fibre charge as determined by conductometric titrations was not affected by refining. However, the surface charge as determined by titrations with poly-DADMAC increased with refining. The increases in specific surface area of pulps by refining resulted in a higher fibre surface charge and also better fibre-fibre bonding. The linear regression models developed using experimental data were found to be accurate. The comparison of model predicted data and the experimental data showed an excellent agreement between them., (Copyright © 2011 Elsevier Ltd. All rights reserved.)

Background: The rapid pace of life, eating habits, and environmental pollution have increased stress levels and its related disorders. The complex molecular response to stress is mediated by stress genes and a variety of regulatory pathways. Oxidative stress is internal damage caused by reactive oxygen species. Increasing evidence suggests that chronic psychosocial stress may increase oxidative stress, which in turn may contribute to aging, and etiology of coronary diseases, cancer, arthritis, etc. Psychophysiological concomitants of meditation have been extensively researched, but there are very little data available on biochemical activity leading to relieving stress by causing a relaxation response by Sudarshan Kriya (SK). SK is a breathing technique that involves breathing in three different rhythms. It is preceded by Ujjayi Pranayam (long and deep breaths with constriction at the base of throat) and Bhastrika (fast and forceful breaths through nose along with arm movements)., Methods: Forty-two SK practitioners and 42 normal healthy controls were recruited for our study. The practitioners had practiced SK for at least 1 year. Selected normal healthy controls did not perform any conventional physical exercise or any formal stress management technique. Whole blood was used for glutathione peroxidase estimation and red blood cell lysate was used for superoxide dismutase activity assay and for glutathione estimation. White blood cells were isolated from fresh blood and assayed for gene expression using reverse transcriptase-polymerase chain reaction. The parameters studied are antioxidant enzymes, genes involved in oxidative stress, DNA damage, cell cycle control, aging, and apoptosis., Results: A better antioxidant status both at the enzyme activity and RNA level was seen in SK practitioners. This was accompanied by better stress regulation and better immune status due to prolonged life span of lymphocytes by up-regulation of antiapoptotic genes and prosurvival genes in these subjects., Conclusions: Our pilot study provides the first evidence suggesting that SK practice may exert effects on immunity, aging, cell death, and stress regulation through transcriptional regulation.

The aim of this work was to study the influence of refining on various pulp properties such as freeness, specific surface area, specific volume, surface charge, total charge and elastic modulus. The results indicated that specific surface area of the pulps increased with increased refining, and at the same freeness level the pine pulp exhibited higher surface charge, surface area, and specific volume than the eucalyptus pulps. Also, the eucalypt pulps were much easier to beat than the pine pulps. The total fibre charge, as determined by conductometric titrations, was not affected by refining. However, the surface charge, as determined by titrations with poly-DADMAC, increased with refining. Increasing the specific surface area by refining resulted in a higher fibre surface charge and better fibre-fibre bonding. The change of the fibre surface charge during refining could be monitored using the FTIR characteristic bands within 1700-1300cm(-1).

Studies were carried out to determine the surface charge and total charge of refined softwood high yield kraft pulps at different levels by titration methods. The results showed that the surface charge was highly dependent on the degree of refining. However, the total fibre charge was not affected by refining. The change of the fibre surface charge during refining monitored using ATR-FTIR characteristic bands was within 1700-1300 cm(-1). Reliable PLS1 calibration models could be established to correlate the FTIR spectral data and the surface charge of the refined pulps.

Pinus radiata kraft pulps with varying carboxyl content were studied using Fourier transform infrared photoacoustic spectroscopy (FT-IR-PAS). The examined pulp samples, with Kappa number ranging from 20.8 to 128, originated from pulping experiments conducted in flow-through reactors utilizing varying effective alkali, temperature, and cooking time. A partial least-squares (PLS) analysis was used to formulate a model that correlates the spectral data with the carboxyl content of pulp. Using three principal components, the resultant PLS model could explain approximately 98.5% of the variance in the X-matrix (spectral features) and 96.8% of the variance in the Y-matrix (measured carboxyl content). The FT-IR-PAS technique in combination with PLS analysis predicts the carboxyl content of the pulps with a high degree of accuracy. This method is much faster than the conventional titration methods and also not destructive to the pulp sample.

Objective: In vitro and animal studies suggest that antitumor effect of chemotherapeutic agents may be enhanced by antioxidants. Therefore, we initiated a clinical study to test the efficacy of high-dose multiple antioxidants (vitamins C, E and beta carotene) as an adjunct to chemotherapy (paclitaxel and carboplatin) in non-small-cell lung cancer., Methods: 136 patients of stage IIIb and stage IV NSCLC were randomized to receive chemotherapy (paclitaxel and carboplatin) alone (chemotherapy arm, n = 72) or chemotherapy in combination with ascorbic acid 6100 mg/day, dl-alpha-tocopherol (vitamin E) 1050 mg/day and beta-carotene 60 mg/day (combination arm, n = 64). Survival were calculated by the Kaplan-Meier method and compared using the log-rank test., Results: An overall response rate (RR) of 33% was observed in chemotherapy arm with 24 patients showing a partial response (PR) and none showing a complete response (CR). In combination arm the overall RR was 37% with 24 patients showing PR and two showing CR. The median survival times in chemotherapy arm and combination arm were nine and 11 months respectively. The overall survival (OS) rates in chemotherapy arm and combination arm at one year were 32.9% and 39.1%, and at two years, 11.1% and 15.6% respectively. None of these differences were statistically significant (p = 0.20). Toxicity profiles were similar in both arms., Conclusions: These results do not support the concern that antioxidants might protect cancer cells from the free radical damage induced by chemotherapy. Larger trials are needed to demonstrate whether high-dose multiple antioxidants in conjunction with chemotherapy increase the response rates and/or survival time in advanced lung cancer.

Four different titration methods for measurement of fiber charge were used in this study. Each method gave different fiber charge values depending on the acidity of the end point and the interaction between the fiber chemical components and the titrant. Also, the interactions between the ionizable groups on the fiber had significant effects on the interpretation of these results. The conductometric titrations showed trends similar to the results obtained from the potentiometric titration. The conductometric titrations with NaOH produced higher fiber charge values, higher than the titrations with NaHCO(3). The differences between the results obtained from the potentiometric and polyelectrolyte titrations, which were associated with the dissolved fiber components during the delignification, were linearly related to the Kappa number of pulps. The positive intercept of this linear relationship indicated that the kraft pulping process not only removed the ionizable groups associated with the dissolved components, but at the same time provided conditions to form new ionizable groups in the fibers. The polyelectrolyte titration results indicated that the lignin content in the fibers did not affect the fiber surface charge. Data extracted from the FTIR spectra of protonated fibers were highly correlated with the fiber charge values obtained from the conductometric titration with NaOH.

Oxidative stress may contribute to the pathophysiology of many chronic diseases. Since psychosocial stress increases oxidative stress, we conducted an exploratory study to investigate the effects of stress reduction with the Sudarshan Kriya (SK) program, on superoxide dismutase (SOD), catalase, glutathione and blood lactate levels in practitioners and non-practitioners of SK. Blood samples of ten practitioners of SK and 14 non-practitioners of any formal stress management technique were analyzed for SOD, catalase, glutathione and lactate levels. Differences between groups and subgroups were analyzed by t-test and correlations between variables compared using Pearson's correlation coefficient. Significantly lower levels of blood lactate (P=3.118e-10) and higher levels of SOD (P=0.0001415), glutathione (P=2.038e-06) and catalase (P=0.001565) were found in practitioners as compared to non-practitioners of SK, thereby suggesting that lower levels of blood lactate and better antioxidant status in practitioners are associated with regular practice of SK technique. However, this study needs to be conducted on a larger sample size to confirm this effect.