Search

Lipase-catalyzed organic reactions have been widely practiced in the past three decades. Especially interesting are insoluble/immobilized forms due to providing a possibility of facile use and recyclability, thus reducing process costs, and making the procedure more environmentally friendly. Carbon-based supports have been extensively exploited for this purpose, because of neutral and biodegradable nature and thermal and chemical stability. Their high specific surface area, characteristic surface morphology and lower mass transfer resistances play a vital role in the performance of the attached enzyme. This review paper presents an overview of the main aspects of lipase immobilized on multi-walled carbon nanotubes (MWCNTs). Moreover, different immobilization strategies to achieve a biocatalyst with improved performances are discussed. Furthermore, as lipases are considered to have high commercial worth for synthesis of valuable organic molecules, the second part of the paper is dedicated to the overview of the most important industrial sectors in which these nanobiocatalysts have been used. In specific, applications in biodiesel production, flavour ester synthesis and racemization are summarize

The obvious benefits of employing prebiotics as functional components in many foods and feed products have resulted in higher demand for their industrial production, necessitating the development of more efficient and cost-effective manufacturing procedures. As a result, the goal of this study was to synthesize confirmed prebiotics, namely fructo-oligosaccharides (FOS), using sucrose as a substrate, since it allows the synthesis of oligosaccharides with lower polymerization degree, and consequently, a more pronounced prebiotic effect. Due to its availability, low market price, and high stability under industrial conditions, a commercial enzymatic mixture, Pectinex® Ultra SP-L, is used as a source of enzyme - fructosyltransferase (FTase). By varying key experimental conditions such as pH, temperature, enzyme and substrate concentrations, as well as the duration of the process, the composition of the FOS mixture can be adjusted to fit the potential applications. It was found that by performing the reaction in an aqueous medium (pH 7), at a temperature of 50 °C using an enzyme concentration of 1% (v/v) and any sucrose concentration in the range of 200-700 g/L, it was possible to achieve maximum FOS yield of 60% of total carbohydrates within a 24 h. The produced syrup with a high content of FOS can be further used as an adequate food additive, or else, developed processes should be used for the transformation of various food products (such as juices, jams, fillings, candies, cakes, etc.) in which sucrose dominates, creating products with lower caloric and higher functional value.

In this study, immobilization of laccase from Trametes versicolor on eight Lifetech™ supports, with different characteristics (pore size, length of the spacer arm and functional groups), was studied and optimized for intended use in bioremediation for decolorization of industrial wastewaters. Out of six tested amino-functionalized supports, the most promising carrier was proved to be porous Lifetech™ ECR8309F with primary amino groups and a C2 spacer arm. Onto this support, laccase is attached by forming electrostatic interactions so that the most active preparation has shown the activity of 66876 U/g support. On the other hand, during immobilization of laccase on epoxy-functionalized Lifetech™ ECR8285F, via hydrophobic interactions and covalent bonding confirmed by a desorption assay, immobilization yield of 60 % and the activity of 118929 U/g were accomplished. Furthermore, immobilized enzyme on this support showed high capacity for decolorization of dyes (Lanaset® Violet B, Lanaset® Blue 2R, bromothymol blue and bromocresol green), by combination of both adsorption and enzyme degradation. Decolorization was in the range of 88 to 96 % after 4 h, with more than 80 % achieved after only 45 min. Also, this preparation demonstrated high operational stability during seven consecutive reuses in all examined dye reaction systems.[Projects of the Serbian Ministry of Education, Science and Technological Development, Grant no. 451-03-68/2020-14/200135 and Grant no. 451-03-68/2020-14/ 200287]

Cellulases are enzymes which catalyse cellulose hydrolysis and are widely used in various industry branches. Lately, their application in treatment of different agroindustrial waste materials which could serve for fuel production is being extensively explored. In order to increase their stability and cost-effectiveness of their usage, application of their immobilized forms are preferred over free enzymes. Hereby, we tested eight different LifetechTM immobilization supports differing in polarity, porosity and functional groups as carriers for Asspergillus Niger cellulase immobilization. Most promising carrier was methacrylate based, with primary amino groups, C6 "space arm" and pores with diameter of 60-120 nm - LifetechTM ECR8409F. For this support, most important immobilization parameters were investigated and after 3 h at pH 6 with initial protein concentration of 23.3 mg/g support immobilized cellulase with 406 IU/g (with carboxymethyl cellulose as a substrate) was obtained. This preparation was successfully applied in the hydrolysis of lignocellulosic fraction of sunflower seed meal, which is widely available byproduct of sunflower seed meal fractionation for protein-rich fractions production. Initial reaction rates and yields of reducing sugars were unchanged comparing to free enzyme, indicating that there were no significant diffusion limitations for substrate to approach active sites of A. Niger cellulase molecules immobilized onto LifetechTM ECR8409F support.

Lipophilic derivatives of vitamin C are additives with antioxidant properties, attractive for application in food, cosmetics and pharmaceutics. They could be synthesized in lipase-catalyzed processes by using various acyl donors. Hereby, we present application of linoleic acid, which is polyunsaturated fatty acid essential in human nutrition, for esterification of vitamin C catalyzed by immobilized enzyme preparation Novozym® 435 in acetone. Highest specific ester yield, 9.7 mmol/g of immobilized lipase, was accomplished with 0.15 M of vitamin C, 0.6 M of linoleic acid, 3 g/l of enzyme and 0.07% (v/v) of water, at 60°C. NMR analyses of purified product proved that synthesized molecule was identical to 6-O-ascorbyl linoleate. Capacity of ester for scavenging 2,2-diphenyl-1-picrylhydrazyl radicals was two times higher comparing to parent molecule, vitamin C. Its diffusion coefficient, determined using Franz cell and cellulose acetate membrane, was 40% higher than palmitate and 62% higher than oleate. Obtained results showed that L-ascorbyl linoleate could be successfully synthesized in biocatalyzed processes. Furthermore, it was demonstrated that it possess high potential for application in different lipophilic products due to its liposolubility, high antioxidant efficiency and good diffusion properties.

Galacto-oligosaccharides (GOS) are important lactose-derived compounds, considered to be a prebiotics, based on abundant scientific evidence about their unique physical properties and physiological effects. This consequently allows their widespread application as supplement in food and feed industry. They are preferably produced by the enzymatic transgalactosylation action of β-galactosidase. However, this enzyme simultaneously performs its primary biological function of lactose hydrolysis, and it is of crucial importance to gain an insight into the influence of different reaction conditions, and provide favorization of transgalactosylation, particularly GOS synthesis reaction. In this study, the response surface methodology (RSM) was applied in terms of individual experimental factors effect estimation, their mutual interaction identification and finally, the determination of optimum conditions for highest GOS yield achievement. Having said that, it can be observed that the temperature and pH have no significant impact on the GOS yield, while on the other hand, the lactose concentration of 400 g/l, enzyme concentration of 13.5 g/l and reaction time of 13 min represent the optimum conditions for achieving the highest GOS yields.

3-Cyano-4-ethoxymethyl-6-methyl-2-pyridone is an important precursor in the synthesis of vitamin B6, obtained in the addition reaction between 2-cyanoacetamide and 1-ethoxy-2,4-pentanedione catalyzed by lipase from Candida rugosa (triacylglycerol ester hydrolases, EC 3.1.1.3). This work shows new experimental data and mathematical modeling of lipase catalyzed synthesis of 3-cyano-4-ethoxymethyl-6-methyl-2-pyridone, starting from 1-ethoxy-2,4-pentanedione and 2-cyanoacetamide. Kinetic measurements were done at 50 oC with enzyme concentration of 1.2 % w/v. Experimental results were fitted with two kinetic models: the ordered bi-ter and ping-pong bi-ter model, and the initial rates of the reaction were found to correlate best with a ping-pong bi-ter mechanism with inhibition by 2-cyanoacetamide. Obtained specificity constants indicated that lipase from C. rugosa had higher affinity towards 1-ethoxy-2,4-pentanedione and less bulky substrates. [Projekat Ministarstva nauke Republike Srbije, br. 172013, br. III 46010 and br. 172049]

Pseudomonas aeruginosa was repeatedly reported as powerful producer of rhamnolipid biosurfactants as well as producer of hydrolytic enzymes. In this study effects of four fermentation factors were evaluated using response surface methodology and experiments were performed in accordance with a four-factor and five-level central composite experimental design. Investigated factors were: fermentation temperature, time of fermentation, concentration of sunflower oil and concentration of Tween® 80. The most important finding was that regression coefficients of the highest values were those that describe interactions between factors and that they differ for lipase and rhamnolipid production, which were both investigated in this study. Production of both metabolites was optimized and response equations were obtained, making it possible to predict rhamnolipid concentration or lipase activity from known values of the four factors. The highest achieved rhamnolipid concentration and lipase activity were 138 mg dm-3 (sunflower oil concentration 0.8 %, Tween® 80 concentration 0.05 %, temperature 30°C, and fermentation time 72 h) and 11111 IU dm-3(sunflower concentration of 0.4 %, Tween® 80 concentration of 0.05 %, temperature of 30°C, and fermentation time of 120 h), respectively. [Projekat Ministarstva nauke Republike Srbije, br. E!6750 and br. III 46010]

Fatty acid ascorbyl esters are liposoluble substances that possess good antioxidative properties. These compounds could be synthesized by using various acyl donors for acylation of vitamin C in reaction catalyzed by chemical means or lipases. Enzymatic process is preferred since it is regioselective, performed under mild reaction conditions, with the obtained product being environmentally friendly. Polar organic solvents, ionic liquids, and supercritical fluids has been successfully used as a reaction medium, since commonly used solvents with high Log P values are inapplicable due to ascorbic acid high polarity. Acylation of vitamin C using fatty acids, their methyl-, ethyl-, and vinyl esters, as well as triglycerides has been performed, whereas application of the activated acyl donors enabled higher molar conversions. In each case, majority of authors reported that using excessive amount of the acyl donor had positive effect on yield of product. Furthermore, several strategies have been employed for shifting the equilibrium towards the product by water content control. These include adjusting the initial water activity by pre-equilibration of reaction mixture, enzyme preparation with water vapor of saturated salt solutions, and the removal of formed water by the addition of molecular sieves or salt hydrate pairs. The aim of this article is to provide a brief overview of the procedures described so far for the lipase-catalyzed synthesis of fatty acid ascorbyl esters with emphasis on the potential application in food, cosmetics, and pharmaceutics. Furthermore, it has been pointed out that the main obstacles for process commercialization are long reaction times, lack of adequate purification methods, and high costs of lipases. Thus, future challenges in this area are testing new catalysts, developing continuous processes for esters production, finding cheaper acyl donors and reaction mediums, as well as identifying standard procedures for purification of products which will not require consumption of large amounts of non-biocompatible organic solvents.

Lipases are very efficient biocatalysts with wide application in synthesis of important ingredients of food, cosmetics and pharmaceutical products, due to their capacity to catalyze both, ester synthesis and ester hydrolysis. The preparation of stable and active immobilized derivatives of lipases is necessity for their application in industrial enzymatic processes. In this work, the optimization of lipase from C. rugosa immobilization by microwave irradiation was performed, since it was previously reported that immobilization process can be drastically accelerated by means of microwave irradiation, even resulting with slight increase of lipase activity. Eupergit®, commercial support with active epoxy groups, was used as immobilization support. In first stage of our study, the immobilization time and ionic strength of immobilization buffer were optimized. It was found out that the highest immobilized activity can be achieved at high ionic strengths (1 M buffer) after 3 min, while further increase of immobilization time led to decrease of lipase activity. Then, the immobilized derivative obtained at optimum conditions was applied in synthesis of amyl isobutyrate in organic solvent. Key reaction factors (temperature, water concentration, immobilized lipase concentration, and substrate molar ratio) were optimized using response surface methodology. The substrate conversion higher above 85% was achieved in our study. The statistical analysis revealed that each of analyzed factors had significant effect on yield of ester, with initial enzyme concentration and substrate molar ratio being the most prominent factors. The second-order regression model that describes the effect of all four factors on substrate conversion was established. The optimum values of factors were: temperature 50ºC, initial immobilized enzyme concentration 220 mg ml-1, added water concentration 0.1% (v/v), and molar ratio acid/alcohol 2.5.

The discovery of carbon nanotubes (CNTs) has opened a new door in nanotechnology. With their high surface area, unique electronic, thermal and mechanical properties, CNTs have been widely used as carriers for protein immobilization. In fact, carbon nanotubes present ideal support system without diffusional limitations, and also have the possibility of surface covalent functionalization. It is usually the oxidation process that introduces carboxylic acid groups. Enzymes and other proteins could be adsorbed or covalently attached onto carbon nanotubes. Adsorption of enzyme is a very simple and inexpensive immobilization method and there are no chemical changes of the protein. It has also been found that this technique does not alter structure and unique properties of nanotubes. However, a major problem in process designing is relatively low stability of immobilized protein and desorption from the carrier. On the other hand, while covalent immobilization provides durable attachment the oxidation process can reduce mechanical and electronic properties of carbon nanotubes. It can also affect the active site of enzyme and cause the loss of enzyme activity. Bioimmobilization studies have showed that there are strong interactions between carbon nanotubes surface and protein. The retention of enzyme structure and activity is critical for their application and it is of fundamental interest to understand the nature of these interactions. Atomic force microscopy (AFM), transmission electron microscopy (TEM), scanning electron microscopy (SEM) and circular dichroism (CD) spectroscopy provide an insight into the structural changes that occur during the immobilization. The aim of this paper is to summarize progress of protein immobilization onto carbon nanotubes.

Lipases can be used for a variety of biotechnological applications: synthesis of fine chemicals, therapeutics, agrochemicals, cosmetics, flavors, biopolymers and biodiesel. Biodiesel is an alternative fuel for diesel engines that is environmentally acceptable. Conventionally, biodiesel is produced by transesterification of triglycerides and short chain alcohols in the presence of an acid or an alkaline catalyst. There are several problems associated with this kind of production that can be resolved by using lipase as the biocatalyst. The usage of lipases has several advantages over the conventional chemical methods. It is considered as less energy intensive and environmentally friendly. However, there are two main obstacles associated with the effective utilization of lipases in the production of biodiesel. The main one is the cost of the enzyme and its poor stability in the presence of excess alcohol. Several strategies are proposed to overcome these drawbacks: immobilization of lipases, stepwise addition of alcohol, and the usage of novel acyl acceptors and the usage of whole cell biocatalysts.

Monoacylglycerols are non-ionic surfactants widely used in the food industry. They are also important in cosmetic and pharmaceutical industries as drug carriers and for the consistency improvements in creams and lotions. Current process for their production is based on the glycerolysis of natural fats and oils in the presence of inorganic catalysts at temperatures higher than 220 oC. The major drawbacks of this process include high-energy consumption, low yield, and poor product quality. The use of lipases for the monoacylglycerols production offers environmental advantages and a reduction in energy consumption. Besides, the same surfactants prepared by the enzymatic synthesis may be labeled as “natural”. Recent progress in the application of highly-stable lipases in the organic solvents offers the possibility of employing various methods to the enzyme-catalyzed synthesis of monoacylglycerols, such as selective hydrolysis of fats and oils using 1,3-regiospecific lipases, the esterification of glycerol with fatty acids and the glycerolysis of fats or oils. In this review, different reaction systems such as aqueous-organic two-phase systems, microemulsions and reverse micelles systems, anhydrous organic solvents, solvent-free systems with free or immobilized lipases, as well as the use of two-phase membrane reactor systems are presented. We discuss some of the key factors, such as the control of water content, removing of the products from reaction system, and the effects of solvent on the lipase activity and selectivity, that must be addressed in order to obtain an efficient reaction system with high yields of monoacylglycerols. Engineering of the enzymatic monoacylglycerols synthesis processes requires also optimization of other factors as: molar ratio of substrates, temperature, type of lipase immobilization and supports (if any), reactor design and operating regime.

The importance of vitamin B6 has been known since its discovery in the 1940's. Chemical tests, elestrometric titration determinations, and absorption spectrum studies showed that this vitamin exists in three major chemical forms: pyridoxine (an alcohol), pyridoxal (an aldehyde), and pyridoxamine (a primary amine). Vitamin B6 is needed for more than 100 enzymes involved in protein metabolism, and it is assumed that this vitamin is cofactor of metabolic processes more important than any other substance. A deficiency of vitamin B6 in the human diet leads to severe disorders. Vitamin B6 is necessary for the proper function of the immune and nervous system, and helps the body convert protein to energy. This paper describes the history, properties and applications of vitamin B6, elucidation of chemical structure, and different procedures for synthesis of pyridoxine and pyridoxamine.

Enzymes produced by indigenous Pseudomonas aeruginosa strain have been subjected to research considering their potential application as detergent additives. As previously noted, lipase produced by Pseudomonas aeruginosa is highly alkaline, thermostable and solvent tolerant. Furthermore, same strain exhibits both lipase and protease activity establishing this lipase as potentially desirable component of enzyme-containing detergents. Further research was carried out to investigate insusceptibility of this lipase against coexisting native protease, several commercial surfactants, oxidizing agents and commercial detergents. Lipases and proteases remained highly active when incubated with several different surfactants and oxidizing agents under washing conditions. Moreover, presence of surfactants and oxidizing agents such as Tween® 20 and Triton® X-100 initially augment lipase and protease activity. Additionally, crude lipase preparation was insusceptible to coexisting native protease hence indicating possible storage stability. Overall, the remarkable properties of these enzymes make them potential detergent additives.

The object of the study was to investigate the process conditions relevant for the pentyl octanoate production with the lipase from Candida rugosa immobilized on Sepabeads EC-EP carrier. This is an epoxide-containing commercial polymethacrylic carrier with suitable characteristics for enzyme immobilization. The immobilized lipase suitable for pentyl octanoate synthesis has been prepared by a direct lipase binding to polymers via their epoxide groups. The enzymatic activity was determined by both hydrolysis of olive oil in an aqueous system and esterification of n-pentanol with octanoic acid in a low aqueous system. The influence of several important reaction parameters such as temperature, initial water content, initial substrate molar ratio, enzyme loading and time of adding of molecular sieves in the system is carefully analyzed by means of an experimental design. Production of the ester was optimized and an ester production response equation was obtained, making it possible to predict ester yields from known values of the five main factors. Almost complete conversion (>99%) of the substrate to ester could be realized, using lipase loading as low as 37 mg/g dry support and in a relatively short time (24 h) at 45ºC, when high initial substrate molar ratio of 2.2 is used.

Lipase-catalyzed synthesis of esters has been widely investigated due to numerous advantages in comparison with the conventional chemical process catalyzed with concentrated acids since use of chemical catalysts leads to several problems. The most important disadvantages are corrosion of equipment, hazards of handling of the corrosive acids that are not reused, loss of conversion, yield and selectivity. The activity of water in reaction mixture seems to be one of the crucial factors affecting yield of enzymatic synthesis, since the excess of water promotes hydrolysis of the ester. Therefore, a significant part of related studies was focused on attempts to increase the yield of esters by efficient control of water activity. In our experimental work an attempt was made to regulate the activity of water by addition of water adsorbents in reaction mixture for synthesis of amyl isobutyrate. Two adsorbents were used: silica gel and molecular sieves (zeolites). The use of water adsorbents was optimized with respect to timing of adsorbent addition and pretreatment of adsorbent. The pretreatment of adsorbent with substrate did not increase the yield of ester. It was found that the timing of adsorbent addition is crucial factor. The addition in early phases of reaction leads to the decrease in ester yield compared to reaction without adsorbents. On the other hand, when the adsorbent was added in the late stage of reaction it exhibited beneficial influence on the yield of ester. The increase of yield was higher with silica gel (10%) than with molecular sieves (3.5%). These discrepancies can be ascribed to higher water adsorbing capacity of silica gel in systems with higher water content. Superior behavior of silica gel in ester synthesis in conjunction with simple process of regeneration recommends the use of this adsorbent for increasing the yield of lipase-catalyzed ester synthesis.

Biodiesel is an alternative fuel for diesel engine that is environmentally acceptable. Conventionally, biodiesel is produced by transesterification of triglycerides and short alcohols in the presence of an acid or an alkaline catalyst. There are several problems associated with this kind of production that can be resolved by using lipase as the biocatalyst. The aim of the present work was to investigate novel acyl acceptors for biodiesel production. 2-Propanol and n-butanol have a less negative effect on lipase stability, and they also improve low temperature properties of the fuel. However, excess alcohol leads to inactivation of the enzyme, and glycerol, a major byproduct, can block the immobilized enzyme, resulting in low enzymatic activity. This problem was solved by using methyl acetate as acyl acceptor. Triacetylglycerol is produced instead of glycerol, and it has no negative effect on the activity of the lipase.

A wild yeast strain isolated from spoiled soybean oil and identified as Candida utilis initially presented rather low lipase activity (approximately 4 IU dm-3) in submerged culture in a universal yeast medium containing 2 % malt extract. Studies were undertaken to improve the lipase production. The best yields of lipase were obtained with a medium supplemented with caprylic and oleic acids as inducers, but higher concentrations of the former (> 0.5 %) had a negative effect on the lipase production and cell growth. The type of nitrogen source seemed also to be very important. The highest lipolytic activity of 284 IU dm-3 was achieved after 5 days of fermentation in a medium containing oleic acid and hydrolyzed casein as carbon and nitrogen sources, respectively, and supplemented with Tween 80®. It was shown that optimization of the fermentation conditions can lead to a significant improvement in the lipase production (more than 70-fold higher compared to the initial value obtained in the non-optimized medium). .

In this study, the feasibility of the synthesis of various flavor esters catalyzed by a commercial lipase from Candida rugosa was investigated and the process parameters were optimized. Lipase from C. rugosa successfully catalyzed the synthesis of 19 esters. The highest yields, of more than 90 % after 20 h, were observed in the synthesis of short-chain esters, pentyl propanoate, isopentyl butanoate, and butyl butanoate. Increasing the number of carbon atoms of both substrates above 8 caused a significant decrease of the initial reaction rates and the final yields. The enzyme showed surprisingly low affinity towards pentanoic acid and hexanoic acid, compared with the higher homologues, octanoic acid and decanoic acid. In addition to the number of carbon atoms, the structure of the substrates had a significant influence on the enzyme activity. Namely, the activity of the enzyme towards isopropanol was significantly lower compared with n-propanol. Additionally, cis-9-octadecenoic acid was a better substrate than octadecanoic acid, its saturated analogue.

The stability of carotenoids was studied in marigold oil extracts prepared with following solvents: Myritol 312®, paraffin oil, almond oil, olive oil, sunflower oil, grape seed oil, and soybean oil. The concentration of the carotenoids was determined by spectroscopic measurement at 450 nm. Degradation rate showed a first order dependence on the concentration of carotenoids with a faster first stage (which lasted 35-50 days, depending on the solvent) and a slower second stage. The highest degradation rates were observed in extracts prepared with linoleic acid rich solvents (sunflower oil, soybean oil and grape seed oil), while the lowest were found in oil with saturated fatty acids (Myritol 312®) and paraffin oil. These results confirm the connection between the degradation of carotenoids and lipid autoxidation, and suggest that the influence of the oil solvents on the stability of oil extracts of Calendula officinalis is a factor that must be considered when selecting a solvent for the production of marigold oil extracts.

An approach is presented for the stable covalent immobilization of Upase from Candida rugosa on Eupergit® with a high retention of hydrolytic activity. It comprises covalent bonding via lipase carbohydrate moiety previously modified by periodate oxidation, allowing a reduction in the involvement of the enzyme functional groups that are probably important in the catalytic mechanism. The hydrolytic activities of the lipase immobilized on Eupergif1 by two conventional methods (via oxirane group and via glutaralde-hyde) and with periodate method were compared. Results of lipase assays suggest that periodate method is superior for lipase immobilization on Eupergit® among methods applied in this study with respect to both, yield of immobilization and hydrolytic activity of the immobilized enzyme.

Copyright of Food & Feed Research is the property of Institute of Food Technology in Novi Sad and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)