Search

The design of myocontrolled devices faces particular challenges in children with dyskinetic cerebral palsy because the electromyographic signal for control contains both voluntary and involuntary components. We hypothesized that voluntary and involuntary components of movements would be uncorrelated and thus detectable as different synergistic patterns of muscle activity, and that removal of the involuntary components would improve online EMG-based control. Therefore, we performed a synergy-based decomposition of EMG-guided movements, and evaluated which components were most controllable using a Fitts Law task. Similarly, we also tested which muscles were most controllable. We then tested whether removing the uncontrollable components or muscles improved overall function in terms of movement time, success rate, and throughput. We found that removal of less controllable components or muscles did not improve EMG control performance, and in many cases worsened performance. These results suggest that abnormal movement in dyskinetic CP is consistent with a pervasive distortion of voluntary movement rather than a superposition of separable voluntary and involuntary components of movement.

The osmotically assisted reverse osmosis (OARO) process is gaining attention for cost‐effective aqueous solution concentration. However, there is a lack of pilot‐scale studies. This research used two spiral‐wound modules in a pilot‐scale plant. The first one, an adapted commercial reverse osmosis module, showed no positive results, likely due to excessive membrane thickness and high internal concentration polarization. In contrast, the second one consisting of a novel forward osmosis prototype demonstrated promising outcomes, achieving water fluxes exceeding 2 L m−2 h−1 even at high salt concentrations (50 g L−1) and relatively low applied pressures (above 12 bar). The study highlights OARO potential, underscores limitations, and emphasizes the need for dedicated module design. [ABSTRACT FROM AUTHOR]

Hydrogen is a versatile energy carrier and storage medium that may be employed in a variety of applications. It may be produced using different processes. In this work, process simulation is used to obtain material and energy balances for each process investigated, as well as for the evaluation of capital and maintenance costs. Process simulation outcomes are then used to estimate three key performance indicators focusing on sustainability issues: the energy return of energy invested, the levelized cost of hydrogen and the life cycle assessment. We compared several hydrogen generation processes, each denoted by a unique colour code: (i) green hydrogen, produced by electrolysis of water using electricity from renewable sources, (ii) grid hydrogen, produced by electrolysis using grid electricity, (iii) grey hydrogen, produced from natural gas using steam reforming and (iv) blue hydrogen, like grey one, but coupled with carbon capture and storage. In conclusion, the most sustainable hydrogen production method is the green hydrogen, produced by water electrolysis.

The utilization of real producer gases such as raw biogas or gasified wood for chemical looping hydrogen production implies the introduction of harmful contaminants into the process. Hydrogen sulfide represents one of the most challenging trace gases in the reformer steam iron cycle. The aim of the present work was an in-depth investigation of steam reforming with pure methane and synthetic biogas contaminated with selective concentrations of 1, 5 and 10 ppm of hydrogen sulfide. To validate the experimental data, the fixed-bed reactor system was modeled as one-dimensional pseudo-homogeneous plug flow reactor by an adapted Maxted model. In a preliminary thermodynamic study, the dry equilibrium composition was determined within a deviation of 4% for steam methane reforming (SMR) and 2% for synthetic biogas reforming compared to the experimental results. The impact of hydrogen sulfide on the reactivity of the catalyst was characterized by the residual methane conversion. The deactivation rate and extent is directly proportional to the concentration of H _2 S, as higher hydrogen sulfide concentrations lead to a faster deactivation and lower residual methane conversion. A comparison of the methane conversion as a function of sulfur coverage between experimental and simulated data showed good agreement. The predicted results are within

Microalgal biomass has been considered as a possible alternative source of carbohydrates and lipids in fermentative/reactional processes, called third generation of biofuels. Carbohydrates from microalgae are mostly composed by glucose and some pentose-derived polymers that must be hydrolyzed to be efficiently used. When enzymatic hydrolysis is applied a pretreatment is required. Sonication/ultrasonication is one of the most promising methods, and in this paper the influence of pretreatment time, sonication intensity and biomass concentration was validated, and the energy consumed in the process compared as well. Sonication intensity had the major role on the enzymatic accessibility. Pretreatment time can be used to decrease hydrolysis time. More than 90% of hydrolysis efficiency was reached when higher amplitude (sonication intensity) and pretreatment time were used. The applied energy influenced indirectly the hydrolysis process. The best saccharification/energy relation was reached when 50% of amplitude for 25 min was applied, obtaining 91% of hydrolysis yield and spending 2.4 MJ/kg of dry biomass. Keywords: Microalgae, Ethanol, Fermentation, Amylase, Cellulase, Sonication

Changes in muscle shape could play an important role during contraction allowing to circumvent some limits imposed by the fascicle force–velocity (F–V) and power–velocity (P–V) relationships. Indeed, during low-force high-velocity contractions, muscle belly shortening velocity could exceed muscle fascicles shortening velocity, allowing the muscles to operate at higher F–V and P–V potentials (i.e., at a higher fraction of maximal force/power in accordance to the F–V and P–V relationships). By using an ultrafast ultrasound, we investigated the role of muscle shape changes (vastus lateralis) in determining belly gearing (muscle belly velocity/fascicle velocity) and the explosive torque during explosive dynamic contractions (EDC) at angular accelerations ranging from 1000 to 4000°.s–2. By means of ultrasound and dynamometric data, the F–V and P–V relationships both for fascicles and for the muscle belly were assessed. During EDC, fascicle velocity, belly velocity, belly gearing, and knee extensors torque data were analysed from 0 to 150 ms after torque onset; the fascicles and belly F–V and P–V potentials were thus calculated for each EDC. Absolute torque decreased as a function of angular acceleration (from 80 to 71 Nm, for EDC at 1000 and 4000°.s–1, respectively), whereas fascicle velocity and belly velocity increased with angular acceleration (P < 0.001). Belly gearing increased from 1.11 to 1.23 (or EDC at 1000 and 4000°.s–1, respectively) and was positively corelated with the changes in muscle thickness and pennation angle (the changes in latter two equally contributing to belly gearing changes). For the same amount of muscle’s mechanical output (force or power), the fascicles operated at higher F–V and P–V potential than the muscle belly (e.g., P–V potential from 0.70 to 0.56 for fascicles and from 0.65 to 0.41 for the muscle belly, respectively). The present results experimentally demonstrate that belly gearing could play an important role during explosive contractions, accommodating the largest part of changes in contraction velocity and allowing the fascicle to operate at higher F–V and P–V potentials.

The present study investigated whether a difference exists in reactive and proactive control for sport considered open or closed skills dominated. Sixteen young (11-12 years) athletes (eight soccer players and eight swimmers) were asked to be engaged into two games competitions that required either a reactive and a proactive type of control. By means of kinematic (i.e. movement time and duration) and dynamic analysis through the force platform (i.e. Anticipatory Postural Adjustments, APAs), we evaluated the level of ability and stability in reacting and anticipating actions. Results indicated that soccer players outperformed swimmers by showing higher stability and a smaller number of falls during the competition where proactive control was mainly required. Soccer players were able to reach that result by anticipating actions through well-modulated APAs. On the contrary, during the competition where reactive control was mainly required, performances were comparable between groups. Therefore, the development of specific action control is already established at 11-12 years of age and is enhanced by the training specificity.

The design of myocontrolled devices faces particular challenges in children with dyskinetic cerebral palsy because the electromyographic signal for control contains both voluntary and involuntary components. We hypothesized that voluntary and involuntary components of movements would be uncorrelated and thus detectable as different synergistic patterns of muscle activity, and that removal of the involuntary components would improve online EMG-based control. Therefore, we performed a synergy-based decomposition of EMG-guided movements, and evaluated which components were most controllable using a Fitts' Law task. Similarly, we also tested which muscles were most controllable. We then tested whether removing the uncontrollable components or muscles improved overall function in terms of movement time, success rate, and throughput. We found that removal of less controllable components or muscles did not improve EMG control performance, and in many cases worsened performance. These results suggest that abnormal movement in dyskinetic CP is consistent with a pervasive distortion of voluntary movement rather than a superposition of separable voluntary and involuntary components of movement.