Search

Improving control over radiolysis would advance nuclear technologies, spanning from radiotherapeutics to national security. Herein, we studied the effects of radiolysis on large-scale production of Am-241.

Tetravalent praseodymium in a homoleptic imidophosphorane complex is identified and characterized in solution via UV-vis-NIR, cyclic voltammetry, theoretical calculations, and X-band EPR.

Whispering gallery mode resonator (WGMR) microspheres yield highly structured optical spectra that are extremely sensitive to their environment and are of intense interest for use in a variety of sensing applications. Many efforts to leverage the unique sensitivities of WGMRs have relied on stringent experimental requirements to correlate specific spectral shifts/changes to an analyte/stimulus such as (1) precise positional knowledge, (2) reference spectra for each microsphere, and (3) high mechanical stability. Consequently, these factors can hinder adequate mixing or incorporation of analytes and can create challenges for remote sensing. This work describes a continuous flow technique for measuring whispering gallery mode (WGM) spectra of dye-doped microspheres suspended in solution and an accompanying analysis scheme that can extract the local refractive index without

The threat of antibiotic-resistant bacteria is an ever-increasing problem in public health. In this report, we examine the photochemical properties with a proof-of-principle biocidal assay for a novel series of regio-regular imidazolium derivative poly-(3-hexylthiophene)/sodium dodecyl sulfate (P3HT-Im/SDS) materials from ultrafast sub-ps dynamics to μs generation of reactive oxygen species (ROS) and 30 min biocidal reactivity with Escherichia coli (E. coli). This broad series encompassing pure P3HT-Im to cationic, neutral, and anionic P3HT-Im/SDS materials are all interrogated by a variety of techniques to characterize the physical material structure, electronic structure, and antimicrobial activity. Our results show that SDS complexation with P3HT-Im results in aggregate materials with reduced ROS generation and light-induced anti-microbial activity. However, our characterization reveals that the presence of non-aggregated or lightly SDS-covered polymer segments is still capable of ROS generation. Full encapsulation of the P3HT-Im polymer completely deactivates the light killing pathway. High SDS concentrations, near and above critical micelle concentration, further deactivate all anti-microbial activity (light and dark) even though the P3HT-Im regains its electronic properties to generate ROS.

The Hyperspectral X-ray Imaging (HXI) project will enable non-destructive chemical-state determination of nano-scale samples in the electron microscope for nuclear safeguards applications. To efficiently measure chemical state through electron-excited X-ray emission requires a combination of wide spectral bandwidth, high resolution, and high count rate capability. We are building a next-generation X-ray detector based on an array of transition edge sensors (TESs) to make these measurements possible and routine in the scanning electron microscope (SEM). Leveraging the large pixel densities afforded by microwave multiplexing readout and continuous, uninterrupted operation of a cryogen-free dilution refrigerator, this instrument will have efficiency to allow chemical species identification of nano-scale samples in hours instead of days to weeks. We describe prototype pixel designs for this HXI instrument, comprising three pixel types that will make up the hybrid TES array. Engineering design of the integrated HXI cryostat and SEM system is in progress, with full detector commissioning expected in Spring 2021 followed closely by full-scale integration with the SEM. We also report on the commissioning of a complementary TES-based X-ray emission spectroscopy platform for bulk samples to build a spectral library for HXI sample identification.

Plutonium-based technologies would benefit if chemical hazards for purifying plutonium were reduced. One critical processing step where improvements could be impactful is the adjustment of plutonium oxidation-states during separations. This transformation often requires addition of redox agents. Unfortunately, many of the redox agents used previously cannot be used today because their properties are deemed incompatible with modern day processing facilities and waste stream safety requirements. We demonstrated herein that photochemistry can be used as an alternative to those chemical agents. We observed that (1) Pu

Historic perspectives describing f-elements as being redox "inactive" are fading. Researchers continue to discover new oxidation states that are not as inaccessible as once assumed for actinides and lanthanides. Inspired by those contributions, we studied americium(III) oxidation in aqueous media under air using NaBiO

The recent isolation of molecular tetravalent lanthanide complexes has enabled renewed exploration of the effect of oxidation state on the single-ion properties of the lanthanide ions. Despite the isotropic nature of the 8S ground state in a tetravalent terbium complex, [Tb(NP(1,2-bis-tBu-diamidoethane)(NEt2))4], preliminary X-band electron paramagnetic resonance (EPR) measurements on tetravalent terbium complexes show rich spectra with broad resonances. The complexity of these spectra highlights the limits of conventional X-band EPR for even qualitative determination of zero-field splitting (ZFS) in these complexes. Therefore, we report the synthesis and characterization of a novel valence series of 4f7 molecular complexes spanning three oxidation states (Eu2+, Gd3+, and Tb4+) featuring a weak-field imidophosphorane ligand system, and employ high-frequency and -field electron paramagnetic resonance (HFEPR) to obtain quantitative values for ZFS across this valence series. The series was designed to minimize deviation in the first coordination sphere from the pseudotetrahedral geometry in order to directly interrogate the role of metal identity and charge on the complexes' electronic structures. These HFEPR studies are supported by crystallographic analysis and quantum-chemical calculations to assess the relative covalent interactions in each member of this valence series and the effect of the oxidation state on the splitting of the ground state and first excited state.

Advancing the field of chemical separations is important for nearly every area of science and technology. Some of the most challenging separations are associated with the americium ion Am(III) for its extraction in the nuclear fuel cycle

Developing chelators that strongly and selectively bind rare-earth elements (Sc, Y, La, and lanthanides) represents a longstanding fundamental challenge in inorganic chemistry. Solving these challenges is becoming more important because of increasing use of rare-earth elements in numerous technologies, ranging from paramagnets to luminescent materials. Within this context, we interrogated the complexation chemistry of the scandium(III) (Sc

The positive impact of having access to well-defined starting materials for applied actinide technologies – and for technologies based on other elements – cannot be overstated. Of numerous relevant 5f-element starting materials, those in complexing aqueous media find widespread use. Consider acetic acid/acetate buffered solutions as an example. These solutions provide entry into diverse technologies, from small-scale production of actinide metal to preparing radiolabeled chelates for medical applications. However, like so many aqueous solutions that contain actinides and complexing agents, 5f-element speciation in acetic acid/acetate cocktails is poorly defined. Herein, we address this problem and characterize Ac3+ and Cm3+ speciation as a function of increasing acetic acid/acetate concentrations (0.1 to 15 M, pH = 5.5). Results obtained via X-ray absorption and optical spectroscopy show the aquo ion dominated in dilute acetic acid/acetate solutions (0.1 M). Increasing acetic acid/acetate concentrations to 15 M increased complexation and revealed divergent reactivity between early and late actinides. A neutral Ac(H2O)6(1)(O2CMe)3(1) compound was the major species in solution for the large Ac3+. In contrast, smaller Cm3+ preferred forming an anion. There were approximately four bound O2CMe1− ligands and one to two inner sphere H2O ligands. The conclusion that increasing acetic acid/acetate concentrations increased acetate complexation was corroborated by characterizing (NH4)2M(O2CMe)5 (M = Eu3+, Am3+ and Cm3+) using single crystal X-ray diffraction and optical spectroscopy (absorption, emission, excitation, and excited state lifetime measurements)., Actinide complexation from aqueous acetic acid/acetate buffered solutions is described. The number of water ligands was directly correlated with the acetate concentration and characterized by X-ray absorption and optical spectroscopy.

Controlling structure and reactivity by manipulating the outer-coordination sphere around a given reagent represents a longstanding challenge in chemistry. Despite advances toward solving this problem, it remains difficult to experimentally interrogate and characterize outer-coordination sphere impact. This work describes an alternative approach that quantifies outer-coordination sphere effects. It shows how molten salt metal chlorides (MCln; M = K, Na, n = 1; M = Ca, n = 2) provided excellent platforms for experimentally characterizing the influence of the outer-coordination sphere cations (Mn+) on redox reactions accessible to lanthanide ions; Ln3+ + e1− → Ln2+ (Ln = Eu, Yb, Sm; e1− = electron). As a representative example, X-ray absorption spectroscopy and cyclic voltammetry results showed that Eu2+ instantaneously formed when Eu3+ dissolved in molten chloride salts that had strongly polarizing cations (like Ca2+ from CaCl2) via the Eu3+ + Cl1− → Eu2+ + ½Cl2 reaction. Conversely, molten salts with less polarizing outer-sphere M1+ cations (e.g., K1+ in KCl) stabilized Ln3+. For instance, the Eu3+/Eu2+ reduction potential was >0.5 V more positive in CaCl2 than in KCl. In accordance with first-principle molecular dynamics (FPMD) simulations, we postulated that hard Mn+ cations (high polarization power) inductively removed electron density from Lnn+ across Ln–Cl⋯Mn+ networks and stabilized electron-rich and low oxidation state Ln2+ ions. Conversely, less polarizing Mn+ cations (like K1+) left electron density on Lnn+ and stabilized electron-deficient and high-oxidation state Ln3+ ions.

Diversifying our ability to guard against emerging pathogenic threats is essential for keeping pace with global health challenges, including those presented by drug-resistant bacteria. Some modern diagnostic and therapeutic innovations to address this challenge focus on targeting methods that exploit bacterial nutrient sequestration pathways, such as the desferrioxamine (DFO) siderophore used by Staphylococcus aureus (S. aureus) to sequester FeIII. Building on recent studies that have shown DFO to be a versatile vehicle for chemical delivery, we show proof-of-principle that the FeIII sequestration pathway can be used to deliver a potential radiotherapeutic. Our approach replaces the FeIII nutrient sequestered by H4DFO+ with ThIV and made use of a common fluorophore, FITC, which we covalently bonded to DFO to provide a combinatorial probe for simultaneous chelation paired with imaging and spectroscopy, H3DFO_FITC. Combining insight provided from FITC-based imaging with characterization by NMR spectroscopy, we demonstrated that the fluorescent DFO_FITC conjugate retained the ThIV chelation properties of native H4DFO+. Fluorescence microscopy with both [Th(DFO_FITC)] and [Fe(DFO_FITC)] complexes showed similar uptake by S. aureus and increased intercellular accumulation as compared to the FITC and unchelated H3DFO_FITC controls. Collectively, these results demonstrate the potential for the newly developed H3DFO_FITC conjugate to be used as a targeting vector and bacterial imaging probe for S. aureus. The results presented within provide a framework to expand H4DFO+ and H3DFO_FITC to relevant radiotherapeutics (like 227Th).

We report two anionic diphosphametallocenates, [K(2.2.2-crypt)][M(PC4Me4)2] (M = Cr, 2-Cr; Fe, 2-Fe). Both are low-spin (S = ½) by EPR spectroscopy and SQUID magnetometry. This contrasts the high-spin (S = 3/2) ferrocenate, [K(2.2.2-crypt)][Fe(C5H2-1,2,4-tBu)2] (4-Fe). Quantum chemical calculations suggest this is due to significant differences in ligand field splitting of the d-orbitals which also explain structural features in the 2-M complexes.

A number of technologies would benefit from developing inorganic compounds and materials with specific electronic and magnetic exchange properties. Unfortunately, designing compounds with these properties is difficult because metal⋅⋅⋅metal coupling schemes are hard to predict and control. Fully characterizing communication between metals in existing compounds that exhibit interesting properties could provide valuable insight and advance those predictive capabilities. One such class of molecules are the series of Lindqvist iron-functionalized and hexavanadium polyoxovanadate-alkoxide clusters, which we characterized here using V K-edge X-ray absorption spectroscopy. Substantial changes in the pre-edge peak intensities were observed that tracked with the V 3d-electron count. The data also suggested substantial delocalization between the vanadium cations. Meanwhile, the FeIII cations were electronically isolated from the polyoxovanadate core.

Actinium-225 (225Ac) is an excellent candidate for targeted radiotherapeutic applications for treating cancer, because of its 10-day half-life and emission of four high-energy α2+ particles. To harness and direct the energetic potential of actinium, strongly binding chelators that remain stable in vivo during biological targeting must be developed. Unfortunately, controlling chelation for actinium remains challenging. Actinium is the largest +3 cation on the periodic table and has a 6d05f0 electronic configuration, and its chemistry is relatively unexplored. Herein, we present theoretical work focused on improving the understanding of actinium bonding with macrocyclic chelating agents as a function of (1) macrocycle ring size, (2) the number and identity of metal binding functional groups, and (3) the length of the tether linking the metal binding functional group to the macrocyclic backbone. Actinium binding by these chelators is presented within the context of complexation with DOTA4-, the most relevant Ac3+ binding agent for contemporary radiopharmaceutical applications. The results enabled us to develop a new strategy for actinium chelator design. The approach is rooted in our identification that Ac3+-chelation chemistry is dominated by ionic bonding interactions and relies on (1) maximizing electrostatic interactions between the metal binding functional group and the Ac3+ cation and (2) minimizing electronic repulsion between negatively charged actinium binding functional groups. This insight will provide a foundation for future innovation in developing the next generation of multifunctional actinium chelators.

The recent isolation of molecular tetravalent lanthanide complexes has enabled renewed exploration of the effect of oxidation state on the single-ion properties of the lanthanide ions. Despite the isotropic nature of the

Radionuclides find widespread use in medical technologies for treating and diagnosing disease. Among successful and emerging radiotherapeutics, 119Sb has unique potential in targeted therapeutic applications for low-energy electron-emitting isotopes. Unfortunately, developing 119Sb-based drugs has been slow in comparison to other radionuclides, primarily due to limited accessibility. Herein is a production method that overcomes this challenge and expands the available time for large-scale distribution and use. Our approach exploits high flux and fluence from high-energy proton sources to produce longer lived 119mTe. This parent isotope slowly decays to 119Sb, which in turn provides access to 119Sb for longer time periods (in comparison to direct 119Sb production routes). We contribute the target design, irradiation conditions, and a rapid procedure for isolating the 119mTe/119Sb pair. To guide process development and to understand why the procedure was successful, we characterized the Te/Sb separation using Te and Sb K-edge X-ray absorption spectroscopy. The procedure provides low-volume aqueous solutions that have high 119mTe—and consequently 119Sb—specific activity in a chemically pure form. This procedure has been demonstrated at large-scale (production-sized, Ci quantities), and the product has potential to meet stringent Food and Drug Administration requirements for a 119mTe/119Sb active pharmaceutical ingredient., A large-scale production method for 119mTe and 119Sb from an Sb target is described, with X-ray absorption spectroscopy measurements providing insight into the success of the chemical separations.

Molten salts have found use as solvents in numerous applications including nuclear reactors, batteries, and the extraction and purification of various metals. Unfortunately, understanding of the chemistry of molten salt solutions is limited. In this presentation we explore the use of molten salts as a testbed for understanding both outer and inner coordination sphere effects on dissolved metal ions. The electron transfer reactions available to lanthanides (Eu3+, Sm3+, and Yb3+) and actinides (U3+, U4+, and Th4+) were explored in a series of alkali and alkaline earth halide salts. We present electrochemical data that demonstrate significant shifts in the reduction potentials of these metal ions as a function of the anion and cation identities of the molten salt solvent. We hypothesize that effects on the reduction potential of these metals come from two sources: (1) the primary coordination sphere and (2) the secondary coordination sphere. The influence from the primary coordination sphere is dominated by the degree of covalency in the coordination bonds between the Lnn+ and Ann+ cations and the molten salt anions. The influence of the secondary coordination sphere is dominated by the electron-withdrawing character of the salt cations. EXAFS data and computational results that support these hypotheses are presented. Further, we provide insight into electrodeposition of the An0 metals under these conditions and highlight temperature and molten salt effects that influence these electrodepositions. Specifically, we propose that increased mobility of solid-state atoms at high temperature (> 800°C) influence the properties of electrodeposited metals.

The torsional dependence of the ground state magnetic exchange coupling (J) and the corresponding electronic coupling matrix element (HDA) for eight transition metal complexes possessing donor-acceptor (D-A) biradical ligands is presented. These biradical ligands are composed of an S = 1/2 metal semiquinone (SQ) donor and an S = 1/2 nitronylnitroxide (NN) acceptor, which are coupled to each other via para-phenylene, methyl-substituted para-phenylenes, or a bicyclo[2.2.2]octane ring. The observed trends in electronic absorption and resonance Raman spectral features are in accord with a reduction in electronic and magnetic coupling between D and A units within the framework of our valence bond configuration interaction model. Moreover, our spectroscopic results highlight different orbital mechanisms that modulate coupling in these complexes, which is not manifest in the ferromagnetic JSQ-B-NN values. The work provides new detailed insight into the effects of torsional rotations which contribute to inhomogeneities in experimentally determined exchange couplings, electron transfer rates, and electron transport conductance measurements.

Advances in targeted α-therapies have increased the interest in actinium (Ac), whose chemistry is poorly defined due to scarcity and radiological hazards. Challenges associated with characterizing Ac3+ chemistry are magnified by its 5f06d0 electronic configuration, which precludes the use of many spectroscopic methods amenable to small amounts of material and low concentrations (like EPR, UV-vis, fluorescence). In terms of nuclear spectroscopy, many actinium isotopes (225Ac and 227Ac) are equally "unfriendly" because the actinium α-, β-, and γ-emissions are difficult to resolve from the actinium daughters. To address these issues, we developed a method for isolating an actinium isotope (228Ac) whose nuclear properties are well-suited for γ-spectroscopy. This four-step procedure isolates 228Ra from naturally occurring 232Th. The relatively long-lived 228Ra (t1/2 = 5.75(3) years) radioisotope subsequently decays to 228Ac. Because the 228Ac decay rate [t1/2 = 6.15(2) h] is fast, 228Ac rapidly regenerates after being harvested from the 228Ra parent. The resulting 228Ac generator provides frequent and long-term access (of many years) to the spectroscopically "friendly" 228Ac radionuclide. We have demonstrated that the 228Ac product can be routinely "milked" from this generator on a daily basis, in chemically pure form, with high specific activity and in excellent yield (∼95%). Hence, in the same way that developing synthesis routes to new starting materials has advanced coordination chemistry for many metals by broadening access, this 228Ac generator has the potential to broaden actinium access for the inorganic community, facilitating the characterization of actinium chemical behavior.

Dichalcogenolene platinum(II) diimine complexes, (LE,E′)Pt(bpy), are characterized by charge-separated dichalcogenolene donor (LE,E′) → diimine acceptor (bpy) ligand-to-ligand charge transfer (LL′CT) excited states that lead to their interesting photophysics and potential use in solar energy conversion applications. Despite the intense interest in these complexes, the chalcogen dependence on the lifetime of the triplet LL′CT excited state remains unexplained. Three new (LE,E′)Pt(bpy) complexes with mixed chalcogen donors exhibit decay rates that are dominated by a spin–orbit mediated nonradiative pathway, the magnitude of which is proportional to the anisotropic covalency provided by the mixed-chalcogen donor ligand environment. This anisotropic covalency is dramatically revealed in the 13C NMR chemical shifts of the donor carbons that bear the chalcogens and is further probed by S K-edge XAS. Remarkably, the NMR chemical shift differences also correlate with the spin–orbit matrix element that connects th...

A major chemical challenge facing implementation of 225Ac in targeted alpha therapy-an emerging technology that has potential for treatment of disease-is identifying an 225Ac chelator that is compatible with in vivo applications. It is unclear how to tailor a chelator for Ac binding because Ac coordination chemistry is poorly defined. Most Ac chemistry is inferred from radiochemical experiments carried out on microscopic scales. Of the few Ac compounds that have been characterized spectroscopically, success has only been reported for simple inorganic ligands. Toward advancing understanding in Ac chelation chemistry, we have developed a method for characterizing Ac complexes that contain highly complex chelating agents using small quantities (μg) of 227Ac. We successfully characterized the chelation of Ac3+ by DOTP8- using EXAFS, NMR, and DFT techniques. To develop confidence and credibility in the Ac results, comparisons with +3 cations (Am, Cm, and La) that could be handled on the mg scale were carried out. We discovered that all M3+ cations (M = Ac, Am, Cm, La) were completely encapsulated within the binding pocket of the DOTP8- macrocycle. The computational results highlighted the stability of the M(DOTP)5- complexes.

Strong spin-dependent delocalization (double exchange) was previously demonstrated for the complexes, NN-Bridge-SQ-Coiii(py)2Cat-Bridge-NN (where NN = S = 12 nitronylnitroxide, Bridge = 1,4-phenylene and single bond, SQ = S = 12 orthobenzosemiquinone, Coiii = low-spin d6 cobalt 3+, and Cat = diamagnetic catecholate). The mixed-valent S = 12 SQ-Coiii-Cat triad results in ferromagnetic alignment of localized (pinned) NN spins which are ∼22 A apart (Bridge = Ph). Herein, we report similar ferromagnetic coupling of localized verdazyl (Vdz) radical spins. The origin of the magnetic exchange results from a second order vibronic effect (pseudo Jahn-Teller effect) in [Vdz-diox-Ru(py)2-diox-Vdz]0, which possesses a diamagnetic [diox-Ru-diox]0 triad by virtue of strong antiferromagnetic SQ-Ruiii exchange.

Uranium complexes (MesDAE)2U(THF) (1-DAE) and Cp2U(MesDAE) (2-DAE) (MesDAE = [ArN-CH2CH2-NAr]; Ar = 2,4,6-trimethylphenyl (Mes)), bearing redox-innocent diamide ligands, have been synthesized and characterized for a full comparison with previously published, redox-active diimine complexes, (MesDABMe)2U(THF) (1-DAB) and Cp2U(MesDABMe) (2-DAB) (MesDABMe = [ArN═C(Me)C(Me)═NAr]; Ar = Mes). These redox-innocent analogues maintain an analogous steric environment to their redox-active ligand counterparts to facilitate a study aimed at determining the differing electronic behavior around the uranium center. Structural analysis by X-ray crystallography showed 1-DAE and 2-DAE have a structural environment very similar to 1-DAB and 2-DAB, respectively. The main difference occurs with coordination of the ene-backbone to the uranium center in the latter species. Electronic absorption spectroscopy reveals these new DAE complexes are nearly identical to each other. X-ray absorption spectroscopy suggests all four species...

Thenoyltrifluoroacetone (HTTA)-based extractions represent popular methods for separating microscopic amounts of transuranic actinides (i.e., Np and Pu) from macroscopic actinide matrixes (e.g. bulk uranium). It is well-established that this procedure enables +4 actinides to be selectively removed from +3, + 5, and +6 f-elements. However, even highly skilled and well-trained researchers find this process complicated and (at times) unpredictable. It is difficult to improve the HTTA extraction—or find alternatives—because little is understood about why this separation works. Even the identities of the extracted species are unknown. In addressing this knowledge gap, we report here advances in fundamental understanding of the HTTA-based extraction. This effort included comparatively evaluating HTTA complexation with +4 and +3 metals (MIV = Zr, Hf, Ce, Th, U, Np, and Pu vs MIII = Ce, Nd, Sm, and Yb). We observed +4 metals formed neutral complexes of the general formula MIV(TTA)4. Meanwhile, +3 metals formed an...

Reported here is the preparation of azacrown ethers functionalized with catechol groups. The synthetic approach was (1st) novel in that it made use of the Mannich reaction and (2nd) valuable in that it provided an improved synthesis (in terms of practical deployment) of the known N,N′-bis(2,3-dihydroxybenzyl)-4,13-diaza-18-crown-6, H4ChaCha. Moreover, it demonstrated potential application of the synthetic method for accommodating a wide range of catecholate functionalities by using the synthetic strategy to prepare N,N′-bis(2,3-dihydroxy-5-tert-butylbenzyl)-4,13-diaza-18-crown-6 (H4tBu2ChaCha) for the first time. These H4ChaCha and H4tBu2ChaCha macrocycles offer exciting opportunity to expand redox chemistry for the f-elements. As “proof-of-principle,” we isolated the unusual tetrameric cluster [La2(tBuChaCha)2]2 from reactions between H4tBu2ChaCha and La[N(SiMe3)2]3. Characterization of [La2(tBuChaCha)2]2 by elemental analysis, single crystal X-ray diffraction, IR, and UV–vis–NIR spectroscopy suggested that the complex represented a rare example of an f-element semiquinone. It further demonstrated that the combination of La3+ and H4tBu2ChaCha provided access to one-electron oxidation chemistry within redox potential windows that were amenable to mild reaction conditions.

Understanding actinide(III) (AnIII = CmIII, AmIII, AcIII) solution-phase speciation is critical for controlling many actinide processing schemes, ranging from medical applications to reprocessing of spent nuclear fuel. Unfortunately, in comparison to most elements in the periodic table, AnIII speciation is often poorly defined in complexing aqueous solutions and in organic media. This neglect – in large part – is a direct result of the radioactive properties of these elements, which make them difficult to handle and acquire. Herein, we surmounted some of the handling challenges associated with these exotic 5f-elements and characterized CmIII, AmIII, and AcIII using AnIII L3-edge X-ray absorption spectroscopy (XAS) as a function of increasing nitric acid (HNO3) concentration. Our results revealed that actinide aquo ions, An(H2O)x3+ (x = 9.6 ± 0.7, 8.9 ± 0.8, and 10.0 ± 0.9 for CmIII, AmIII, and AcIII), were the dominant species in dilute HNO3 (0.05 M). In concentrated HNO3 (16 M), shell-by-shell fitting of the extended X-ray fine structure (EXAFS) data showed the nitrate complexation increased, such that the average stoichiometries of Cm(NO3)4.1±0.7(H2O)5.7±1.3(1.1±0.2)−, Am(NO3)3.4±0.7(H2O)5.4±0.5(0.4±0.1)−, and Ac(NO3)2.3±1.7(H2O)8.3±5.2(0.7±0.5)+ were observed. Data obtained at the intermediate HNO3 concentration (4 M) were modeled as a linear combination of the 0.05 and 16 M spectra. For all three metals, the intermediate models showed larger contributions from the 0.05 M HNO3 spectra than from the 16 M HNO3 spectra. Additionally, these efforts enabled the Cm–NO3 and Ac–NO3 distances to be measured for the first time. Moreover, the AnIII L3-edge EXAFS results, contribute to the growing body of knowledge associated with CmIII, AmIII, and AcIII coordination chemistry, in particular toward advancing understanding of AnIII solution phase speciation.

225 Ac is a valuable medical radionuclide for targeted α therapy, but 227 Ac is an undesirable byproduct of an accelerator-based synthesis method under investigation. Sufficient detector sensitivity is critical for quantifying the trace impurity of 227 Ac , with the 227 Ac / 225 Ac activity ratio predicted to be approximately 0.15% by end-of-bombardment (EOB). Superconducting transition edge sensor (TES) microcalorimeters offer high resolution energy spectroscopy using the normal-to-superconducting phase transition to measure small changes in temperature. By embedding 225 Ac production samples in a gold foil thermally coupled to a TES microcalorimeter we can measure the decay energies of the radionuclides embedded with high resolution and 100% detection efficiency. This technique, known as decay energy spectroscopy (DES), collapses several peaks from α decays into single Q-value peaks. In practice there are more complex factors in the interpretation of data using DES, which we will discuss herein. Using this technique we measured the EOB 227 Ac impurity to be (0.142 ± 0.005)% for a single production sample. This demonstration has shown that DES is a useful tool for quantitative measurements of complicated spectra.

Charge transfer doping of a nominally disordered conjugated polymer induces long-range conformational ordering (stiffening) of backbone segments. Addition of [2,3-dichloro-5,6-dicyano-p-benzoquinone (DDQ) to dilute solutions of poly[2-methoxy-5-(3′,7′-dimethyloctyloxy)-1,4-phenylenevinylene] (MDMO-PPV) results in quantitative charge transfer in the ground electronic state of the polymer. Following charge (hole) injection, greater MDMO-PPV monomer coplanarity is evident in electronic, Raman, and electron paramagnetic resonance (EPR) spectra over a broad range of dopant loadings. New transitions emerge at lower energies with spectral patterns distinct from pristine materials but closely resemble minority low energy conformers selectively that can be prepared by careful control of processing conditions. We further demonstrate that characteristic Raman patterns of PPV systems actually contain signatures of a minority ordered form that interacts preferentially with the dopant. Subsequent additions of dopant al...

Developing a better understanding of covalency (or orbital mixing) is of fundamental importance. Covalency occupies a central role in directing chemical and physical properties for almost any given compound or material. Hence, the concept of covalency has potential to generate broad and substantial scientific advances, ranging from biological applications to condensed matter physics. Given the importance of orbital mixing combined with the difficultly in measuring covalency, estimating or inferring covalency often leads to fiery debate. Consider the 60-year controversy sparked by Seaborg and co-workers ( Diamond, R. M.; Street, K., Jr.; Seaborg, G. T. J. Am. Chem. Soc. 1954 , 76 , 1461 ) when it was proposed that covalency from 5f-orbitals contributed to the unique behavior of americium in chloride matrixes. Herein, we describe the use of ligand K-edge X-ray absorption spectroscopy (XAS) and electronic structure calculations to quantify the extent of covalent bonding in-arguably-one of the most difficult systems to study, the Am-Cl interaction within AmCl

Metal aquo ions occupy central roles in all equilibria that define metal complexation in natural environments. These complexes are used to establish thermodynamic metrics (i.e., stability constants) for predicting metal binding, which are essential for defining critical parameters associated with aqueous speciation, metal chelation, in vivo transport, and so on. As such, establishing the fundamental chemistry of the actinium(III) aquo ion (Ac-aquo ion, Ac(H2O)x3+) is critical for current efforts to develop 225Ac [t1/2 = 10.0(1) d] as a targeted anticancer therapeutic agent. However, given the limited amount of actinium available for study and its high radioactivity, many aspects of actinium chemistry remain poorly defined. We overcame these challenges using the longer-lived 227Ac [t1/2 = 21.772(3) y] isotope and report the first characterization of this fundamentally important Ac-aquo coordination complex. Our X-ray absorption fine structure study revealed 10.9 ± 0.5 water molecules directly coordinated to the AcIII cation with an Ac–OH2O distance of 2.63(1) Å. This experimentally determined distance was consistent with molecular dynamics density functional theory results that showed (over the course of 8 ps) that AcIII was coordinated by 9 water molecules with Ac–OH2O distances ranging from 2.61 to 2.76 Å. The data is presented in the context of other actinide(III) and lanthanide(III) aquo ions characterized by XAFS and highlights the uniqueness of the large AcIII coordination numbers and long Ac–OH2O bond distances., The actinium aquo complex has been characterized using Ac L3-edge X-ray absorption spectroscopy and molecular dynamics density functional theory.

The isolation of [K(2.2.2-cryptand)][Ln(C5H4SiMe3)3], formally containing LnII, for all lanthanides (excluding Pm) was surprising given that +2 oxidation states are typically regarded as inaccessible for most 4f-elements. Herein, X-ray absorption near-edge spectroscopy (XANES), ground-state density functional theory (DFT), and transition dipole moment calculations are used to investigate the possibility that Ln(C5H4SiMe3)31- (Ln = Pr, Nd, Sm, Gd, Tb, Dy, Y, Ho, Er, Tm, Yb and Lu) compounds represented molecular LnII complexes. Results from the ground-state DFT calculations were supported by additional calculations that utilized complete-active-space multi-configuration approach with second-order perturbation theoretical correction (CASPT2). Through comparisons with standards, Ln(C5H4SiMe3)31- (Ln = Sm, Tm, Yb, Lu, Y) are determined to contain 4f6 5d0 (SmII), 4f13 5d0 (TmII), 4f14 5d0 (YbII), 4f14 5d1 (LuII), and 4d1 (YII) electronic configurations. Additionally, our results suggest that Ln(C5H4SiMe3)31- (Ln = Pr, Nd, Gd, Tb, Dy, Ho, and Er) also contain LnII ions, but with 4f n 5d1 configurations (not 4f n+1 5d0). In these 4f n 5d1 complexes, the C3h-symmetric ligand environment provides a highly shielded 5d-orbital of a' symmetry that made the 4f n 5d1 electronic configurations lower in energy than the more typical 4f n+1 5d0 configuration.

Control of excited-state processes is crucial to an increasing number of important device technologies that include displays, photocatalysts, solar energy conversion devices, photovoltaics, and photonics. However, the manipulation and control of electronic excited-state lifetimes and properties continue to be a challenge for molecular scientists. Herein, we present the results of ground-state and transient absorption spectroscopies as they relate to magnetic exchange control of excited-state lifetimes. We describe a novel mechanism for controlling these excited-state lifetimes that involves varying the magnetic exchange interaction between a stable organic radical and the unpaired electrons present in the open-shell configuration of a charge-separated excited state. Specifically, we show that the excited-state lifetime can be controlled in a predictable manner based on an a priori knowledge of the pairwise magnetic exchange interactions between excited-state spins. These magnetic exchange couplings affect the excited-state electronic structure in a manner that introduces variable degrees of spin forbiddenness into the nonradiative decay channel between the excited state and the electronic ground state.

Arylazide and diazene activation by highly reduced uranium(IV) complexes bearing trianionic redox-active pyridine(diimine) ligands, [CpPU(MesPDIMe)]2 (1-CpP), Cp*U(MesPDIMe)(THF) (1-Cp*) (CpP = 1-(7,7-dimethylbenzyl)cyclopentadienide; Cp* = η5-1,2,3,4,5-pentamethylcyclopentadienide), and Cp*U(tBu-MesPDIMe) (THF) (1-tBu) (2,6-((Mes)N═CMe)2-p-R-C5H2N, Mes = 2,4,6-trimethylphenyl; R = H, MesPDIMe; R = C(CH3)3, tBu-MesPDIMe), has been investigated. While 1-Cp* and 1-CpP readily reduce N3R (R = Ph, p-tolyl) to form trans-bis(imido) species, CpPU(NAr)2(MesPDIMe) (Ar = Ph, 2-CpP; Ar = p-Tol, 3-CpP) and Cp*U(NPh)2(MesPDIMe) (2-Cp*), only 1-Cp* can cleave diazene N═N double bonds to form the same product. Complexes 2-Cp*, 2-CpP, and 3-CpP are uranium(V) trans-bis(imido) species supported by neutral [MesPDIMe]0 ligands formed by complete oxidation of [MesPDIMe]3– ligands of 1-CpP and 1-Cp*. Variation of the arylimido substituent in 2-Cp* from phenyl to p-tolyl, forming Cp*U(NTol)2(MesPDIMe) (3-Cp*), changes the ele...

© 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim Advancing our understanding of the minor actinides (Am, Cm) versus lanthanides is key for developing advanced nuclear-fuel cycles. Herein, we describe the preparation of (NBu4)Am[S2P(tBu2C12H6)]4and two isomorphous lanthanide complexes, namely one with a similar ionic radius (i.e., NdIII) and an isoelectronic one (EuIII). The results include the first measurement of an Am−S bond length, with a mean value of 2.921(9) Å, by single-crystal X-ray diffraction. Comparison with the EuIIIand NdIIIcomplexes revealed subtle electronic differences between the complexes of AmIIIand the lanthanides.

A multi-technique spectroscopic and theoretical study of the Cp(2)M(benzenedithiolato) (M=Ti,V,Mo; Cp = η(5)-C(5)H(5)) series provides deep insight into dithiolene electronic structure contributions to electron transfer reactivity and reduction potential modulation in pyranopterin molybdenum enzymes. This work explains the magnitude of the dithiolene folding distortion, and the concomitant changes in metal-ligand covalency, that are sensitive to electronic structure changes as a function of d-electron occupancy in the redox orbital. It is shown that the large fold angle differences correlate with covalency, and the fold angle distortion is due to a pseudo-Jahn-Teller (PJT) effect. The PJT effect in these and related transition metal dithiolene systems arise from the small energy differences between metal and sulfur valence molecular orbitals, which uniquely poise these systems for dramatic geometric and electronic structure changes as the oxidation state changes. Herein, we have used a combination of resonance Raman, magnetic circular dichroism, electron paramagnetic resonance, and UV photoelectron spectroscopies to explore the electronic states involved in the vibronic coupling mechanism. Comparison between the UV photoelectron spectroscopy (UPS) of the d(2) M=Mo complex and the resonance Raman spectra of the d(1) M=V complex reveals the power of this combined spectroscopic approach. Here, we observe that the UPS spectrum of Cp(2)Mo(bdt) contains an intriguing vibronic progession that is dominated by a “missing-mode” that is comprised of PJT active distortions. We discuss the relationship of the PJT distortions to facile electron transfer in molybdenum enzymes.

CmIII, AmIII, and AcIII have been characterized by solution L3-edge X-ray absorption spectroscopy as a function of nitric acid concentration. This enabled the first experimental determination of Cm and Ac nitrate distances., Understanding actinide(iii) (AnIII = CmIII, AmIII, AcIII) solution-phase speciation is critical for controlling many actinide processing schemes, ranging from medical applications to reprocessing of spent nuclear fuel. Unfortunately, in comparison to most elements in the periodic table, AnIII speciation is often poorly defined in complexing aqueous solutions and in organic media. This neglect – in large part – is a direct result of the radioactive properties of these elements, which make them difficult to handle and acquire. Herein, we surmounted some of the handling challenges associated with these exotic 5f-elements and characterized CmIII, AmIII, and AcIII using AnIII L3-edge X-ray absorption spectroscopy (XAS) as a function of increasing nitric acid (HNO3) concentration. Our results revealed that actinide aquo ions, An(H2O)x3+ (x = 9.6 ± 0.7, 8.9 ± 0.8, and 10.0 ± 0.9 for CmIII, AmIII, and AcIII), were the dominant species in dilute HNO3 (0.05 M). In concentrated HNO3 (16 M), shell-by-shell fitting of the extended X-ray fine structure (EXAFS) data showed the nitrate complexation increased, such that the average stoichiometries of Cm(NO3)4.1±0.7(H2O)5.7±1.3(1.1±0.2)–, Am(NO3)3.4±0.7(H2O)5.4±0.5(0.4±0.1)–, and Ac(NO3)2.3±1.7(H2O)8.3±5.2(0.7±0.5)+ were observed. Data obtained at the intermediate HNO3 concentration (4 M) were modeled as a linear combination of the 0.05 and 16 M spectra. For all three metals, the intermediate models showed larger contributions from the 0.05 M HNO3 spectra than from the 16 M HNO3 spectra. Additionally, these efforts enabled the Cm–NO3 and Ac–NO3 distances to be measured for the first time. Moreover, the AnIII L3-edge EXAFS results, contribute to the growing body of knowledge associated with CmIII, AmIII, and AcIII coordination chemistry, in particular toward advancing understanding of AnIII solution phase speciation.

Protactinium-230 (t1/2 = 17.4 d) is the parent isotope of 230U (t1/2 = 20.8 d), a radionuclide of interest for targeted alpha therapy (TAT). Column chromatographic methods have been developed to separate no-carrier-added 230Pa from proton irradiated thorium targets and accompanying fission products. Results reported within demonstrate the use of novel sulfur bearing chromatographic extraction resins for the selective separation of protactinium. The recovery yield of 230Pa was 93 ± 4% employing a R3P═S type commercially available resin and 88 ± 4% employing a DGTA (diglycothioamide) containing custom synthesized extraction chromatographic resin. The radiochemical purity of the recovered 230Pa was measured via high purity germanium γ-ray spectroscopy to be >99.5% with the remaining radioactive contaminant being 95Nb due to its similar chemistry to protactinium. Measured equilibrium distribution coefficients for protactinium, thorium, uranium, niobium, radium, and actinium on both the R3P═S type and the DGTA...

Excited state processes involving multiple electron spin centers are crucial elements for both spintronics and quantum information processing. Herein, we describe an addressable excited state mechanism for precise control of electron spin polarization. This mechanism derives from excited state magnetic exchange couplings that occur between the electron spins of a photogenerated electron-hole pair and that of an organic radical. The process is initiated by absorption of a photon followed by ultrafast relaxation within the excited state spin manifold. This leads to dramatic changes in spin polarization between excited states of the same multiplicity. Moreover, this photoinitiated spin polarization process can be "read" spectroscopically using a magnetooptical technique that is sensitive to the excited state electron spin polarizations and allows for the evaluation of wave functions that give rise to these polarizations. This system is unique in that it requires neither intersystem crossing nor magnetic resonance techniques to create dynamic spin-polarization effects in molecules.

Charge transfer doping efficiencies of π-stacked poly(3-hexylthiophene) (P3HT) aggregate nanofibers are studied using spectroscopic and electron microscopy probes. Solution dispersions of self-assembled P3HT nanofibers are doped in the ground electronic state by adding varying amounts (w/w%) of the strong charge transfer dopant 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F4-TCNQ). Careful control of self-assembly conditions allows us to select either the H- and J-aggregate limiting forms, which differ primarily in the degree of purity (i.e., molecular weight fractionation) and nanomorphology. Electron paramagnetic resonance (EPR), electronic absorption, and Raman spectroscopy of F4-TCNQ–:P3HT+ species are then used to track doping efficiency with dopant loading. J-aggregate nanofibers exhibit over an order of magnitude larger doping efficiencies than polymorphic H-aggregate nanofibers. The higher purity and order of the former promote intrachain polaron delocalization whereas disorder arising fr...

We review the xanthine oxidase (XO) family of pyranopterin molybdenum enzymes with a specific emphasis on electronic structure contributions to reactivity. In addition to xanthine and aldehyde oxidoreductases, which catalyze the two-electron oxidation of aromatic heterocycles and aldehyde substrates, this mini-review highlights recent work on the closely related carbon monoxide dehydrogenase (CODH) that catalyzes the oxidation of CO using a unique Mo-Cu heterobimetallic active site. A primary focus of this mini-review relates to how spectroscopy and computational methods have been used to develop an understanding of critical relationships between geometric structure, electronic structure, and catalytic function.

LnII(C5H4SiMe3)1– have been characterized by XANES and DFT., The isolation of [K(2.2.2-cryptand)][Ln(C5H4SiMe3)3], formally containing LnII, for all lanthanides (excluding Pm) was surprising given that +2 oxidation states are typically regarded as inaccessible for most 4f-elements. Herein, X-ray absorption near-edge spectroscopy (XANES), ground-state density functional theory (DFT), and transition dipole moment calculations are used to investigate the possibility that Ln(C5H4SiMe3)3 1– (Ln = Pr, Nd, Sm, Gd, Tb, Dy, Y, Ho, Er, Tm, Yb and Lu) compounds represented molecular LnII complexes. Results from the ground-state DFT calculations were supported by additional calculations that utilized complete-active-space multi-configuration approach with second-order perturbation theoretical correction (CASPT2). Through comparisons with standards, Ln(C5H4SiMe3)3 1– (Ln = Sm, Tm, Yb, Lu, Y) are determined to contain 4f6 5d0 (SmII), 4f13 5d0 (TmII), 4f14 5d0 (YbII), 4f14 5d1 (LuII), and 4d1 (YII) electronic configurations. Additionally, our results suggest that Ln(C5H4SiMe3)3 1– (Ln = Pr, Nd, Gd, Tb, Dy, Ho, and Er) also contain LnII ions, but with 4fn 5d1 configurations (not 4fn+1 5d0). In these 4fn 5d1 complexes, the C 3h-symmetric ligand environment provides a highly shielded 5d-orbital of a′ symmetry that made the 4fn 5d1 electronic configurations lower in energy than the more typical 4fn+1 5d0 configuration.

The recently synthesized and isolated low-coordinate Fe(V) nitride complex has numerous implications as a model for high-oxidation states in biological and industrial systems. The trigonal [PhB((t)BuIm)3Fe(V)≡N](+) (where (PhB((t)BuIm)3(-) = phenyltris(3-tert-butylimidazol-2-ylidene)), (1) low-spin d(3) (S = 1/2) coordination compound is subject to a Jahn-Teller (JT) distortion of its doubly degenerate (2)E ground state. The electronic structure of this complex is analyzed by a combination of extended versions of the formal two-orbital pseudo Jahn-Teller (PJT) treatment and of quantum chemical computations of the PJT effect. The formal treatment is extended to incorporate mixing of the two e orbital doublets (30%) that results from a lowering of the idealized molecular symmetry from D3h to C3v through strong "doming" of the Fe-C3 core. Correspondingly we introduce novel DFT/CASSCF computational methods in the computation of electronic structure, which reveal a quadratic JT distortion and significant e-e mixing, thus reaching a new level of synergism between computational and formal treatments. Hyperfine and quadrupole tensors are obtained by pulsed 35 GHz ENDOR measurements for the (14/15)N-nitride and the (11)B axial ligands, and spectra are obtained from the imidazole-2-ylidene (13)C atoms that are not bound to Fe. Analysis of the nitride ENDOR tensors surprisingly reveals an essentially spherical nitride trianion bound to Fe, with negative spin density and minimal charge density anisotropy. The four-coordinate (11)B, as expected, exhibits negligible bonding to Fe. A detailed analysis of the frontier orbitals provided by the electronic structure calculations provides insight into the reactivity of 1: JT-induced symmetry lowering provides an orbital selection mechanism for proton or H atom transfer reactivity.