Search

Resume Comme pour tout traitement, la prescription d’inhibiteurs de la resorption osseuse (IRO) implique de mettre en balance les benefices et les risques attendus du traitement. Peu frequente mais invalidante, l’osteonecrose des mâchoires d’origine medicamenteuse (ONM) n’en reste pas moins l’effet indesirable le plus redoute des patients(e)s comme de certains professionnels de sante, possiblement en rapport avec une meconnaissance des elements constituant cette balance benefices/risques. Une approche multidisciplinaire concertee, la prevention primaire via la realisation systematique d’un bilan bucco-dentaire pretherapeutique des lors que la situation clinique le permet, mais aussi l’instauration d’un suivi oral regulier permettent de considerablement limiter le risque d’ONM associe aux IRO, de faciliter l’adherence au traitement et d’ameliorer la qualite des soins.

To assess whether the administration of meloxicam before head and neck radiotherapy reduces the risk of mandibular osteoradionecrosis in rats. Sixty male Wistar rats were randomly divided into 6 groups (n = 10) according to the meloxicam administration and radiation therapy: control (C), irradiated (I), single dose of meloxicam (M1), single dose of meloxicam and irradiated (M1I), triple dose of meloxicam (M3), triple dose of meloxicam and irradiated (M3I). Meloxicam was administrated (20 mg/kg per dose) 1 h before the radiation therapy (single dose of 20 Gy) and 24 h and 48 h after the radiation therapy for groups with two additional doses. Ten days after the radiation therapy, the three right mandibular molars were extracted from all rats, who were euthanatized after 21 or 35 days (n = 5 per group). The mandibles were assessed by macroscopic evaluation and micro-CT analysis. The right hemimandibles of the irradiated groups revealed macroscopic signs of osteoradionecrosis, and those of the non-irradiated groups revealed complete gingival healing. A significant delay in alveolar socket healing in all irradiated groups was observed in the micro-CT assessment regardless meloxicam treatment. The administration of meloxicam before head and neck radiotherapy does not reduce the risk of mandibular osteoradionecrosis when associated to dental extractions. Since meloxicam has been shown to be a potential radiation-protective agent, and osteoradionecrosis physiopathology is believed to be related to an inflammatory process, possible interactions are relevant to be investigated.

Background Bone debris generated during site preparation is generally evacuated with irrigation; here, we evaluated whether retention of this autologous material improved the rate of peri‐implant bone formation. Materials and methods In 25 rats, a miniatured implant system comprised of an osseo‐shaping tool and a tri‐oval shaped implant was compared against a conventional drill and round implant system. A split‐mouth design was used, and fresh extraction sockets served as implant sites. Histology/histomorphometry, immunohistochemistry, and μCT imaging were performed immediately after implant placement, and on post‐surgery days 3, 7, 14 and 28. Results Compared to a conventional drill design, the osseo‐shaping tool produced a textured osteotomy surface and viable bone debris that was retained in the peri‐implant environment. Proliferating osteoprogenitor cells, identified by PCNA and Runx2 expression, contributed to faster peri‐implant bone formation. Although all implants osseointegrated, sites prepared with the osseo‐shaping tool showed evidence of new peri‐implant bone sooner than controls. Conclusion Bone debris produced by an osseo‐shaping tool directly contributed to faster peri‐implant bone formation and implant osseointegration. This article is protected by copyright. All rights reserved

Objectives To evaluate the distribution of metal artifacts from the exomass in small field-of-view (FOV) cone beam computed tomography (CBCT) scans. Study Design An image phantom was scanned by using 3 CBCT units. Metal objects were positioned in the exomass, and additional CBCT scans were obtained. Mean gray values were obtained from 16 homogeneous areas and the standard deviation was calculated to quantify gray level inhomogeneity according to distinct zones of the FOV: total area and outer, inner, right, left, and mid-zones. The discrepancy between each zone and the total area was calculated to compare different CBCT units. Mean gray, gray level inhomogeneity, and discrepancy values were separately assessed by using analysis of variance (ANOVA) and Tukey's test (α = 0.05). Results Overall, the mean gray values were significantly lower in the inner zone, and the gray level inhomogeneity values were significantly higher in the inner and mid-zones irrespective of the presence of metal objects in the exomass. The 3 CBCT units presented significantly different discrepancy values in most conditions. Conclusions The distribution of metal artifacts from the exomass follows the inherent gray value dispersion of CBCT images, with greater inhomogeneity in the inner zone of the FOV. This is exacerbated when metal objects are in the exomass.

Objectives: This review aimed to present studies that prospectively investigated biological effects in patients following diagnostic dentomaxillofacial radiology (DMFR). Methods: Literature was systematically searched to retrieve all studies assessing radiobiological effects of using X-ray imaging in the dentomaxillofacial area, with reference to radiobiological outcomes for other imaging modalities and fields. Results: There is a lot of variability in the reported radiobiological assessment methods and radiation dose measures, making comparisons of radiobiological studies challenging. Most radiological DMFR studies are focusing on genotoxicity and cytotoxicity, data for 2D dentomaxillofacial radiographs, albeit with some methodological weakness biasing the results. For CBCT, available evidence is limited and few studies include comparative data on both adults and children. Conclusions In the future, one will have to strive towards patient-specific measures by considering age, gender and other individual radiation sensitivity-related factors. Ultimately, future radioprotection strategies should build further on the concept of personalized medicine, with patient-specific optimization of the imaging protocol, based on radiobiological variables.

Objectives To evaluate the peri-implant trabecular bone volume and architecture changes with 6-month follow-up after local application of platelet-rich plasma (PRP) and platelet-poor plasma (PPP) using high-resolution micro-CT. Material and methods Seventy-two dental implants were placed into healed mandibular sites of 9 beagle dogs. Implants were randomly divided into 4 groups following a split-mouth design: control I; control II; PPP; and PRP. Primary and secondary stabilities were assessed using resonance frequency analyses. At 1, 3, and 6 months after implant loading, trabecular structural parameters were evaluated at 0.5, 1, and 1.5 mm away from implants using micro-CT (voxel = 20 μm). Results Primary and secondary stabilities were equivalent in all conditions. PPP and PRP groups showed higher bone volume fraction (BV/TV) and trabecular thickness (Tb.Th) but lower trabecular separation (Tb.Sp) and total porosity percentage (Po (tot)) at all 3 time points. A significant decrease in BV/TV and Tb.Th was found for the control groups after 3 months of healing, while this was not observed in both the PPP and PRP groups. However, no distinct difference was found between the PRP and PPP groups over time. Moreover, as the investigated distance from the implant surface increased, BV/TV and Po (tot) within the same group and time point stayed the same, yet Tb.Th and Tb.Sp continued to increase. Conclusions Platelet-rich plasma and PPP with conventional implant placement lead to similar primary and secondary implant stability, but improved peri-implant bone volume and structural integration. The present research does not seem to suggest a different bone remodeling pattern when using PRP or PPP.

To propose a modified protocol of mandibular osteoradionecrosis induction in rats with external beam radiation therapy. A total of 45 male Wistar rats were used in this study. Firstly, 25 rats were divided into 5 groups (n = 5) according to the radiation dose protocol: without irradiation and irradiated with 15 Gy, 20 Gy, 25 Gy, or 30 Gy using a linear accelerator. Secondly, 15 other rats were divided into 3 groups (n = 5) according to the time of extraction of the three right mandibular molars: 7, 10, or 14 days after irradiation of 20 Gy. Lastly, dental extractions were performed in 5 other rats without irradiation (C-E10) for comparison with those of the group of dental extractions 10 days after irradiation (I-E10). The irradiated animals survived throughout the study period only at single doses of 15 Gy and 20 Gy. The suitable time for dental extractions after irradiation to induce mandibular osteoradionecrosis was defined as 10 days. Macroscopic evaluation of the right hemimandibles showed presence of osteoradionecrosis in I-E10 group and complete gingival healing in C-E10 group. A single radiation dose of 20 Gy focused on head and neck region combined with the extraction of the three mandibular molars 10 days after irradiation constitutes a feasible protocol of mandibular osteoradionecrosis induction in rats with external beam radiation therapy. Establishing a solid and widely available protocol of mandibular osteoradionecrosis induction is essential in the search for methods to prevent this complex disease.

Dose optimisation has been revisited in the literature due to the high frequency of cone-beam CT (CBCT) scans and, the reduction of the field-of-view (FOV) size has shown to be an effective strategy. However, small FOV scans have negative influences of the truncation effect from the exomass.The aim of this study was to evaluate the diagnostic accuracy of an optimised CBCT protocol for the detection of simulated vertical root fracture (VRF) in the presence of metallic artefacts from the exomass and/or endomass.Twenty teeth were endodontically instrumented and VRF was induced in half of them. All teeth were individually placed in a human mandible, metallic materials were placed in the exomass and/or endomass, and CBCT scans were obtained at two dose protocols: standard and optimised. Three radiologists evaluated the images and indicated the presence of VRF using a 5-point scale. Sensitivity, specificity and area under the ROC curve (AUC) were obtained and compared using ANOVA (α=0.05). Overall, sensitivity, specificity and AUC did not differ significantly (p>0.05) between the dose protocols.In conclusion, optimised protocols should be considered in the detection of simulated VRF irrespective of the occurrence of artefacts from metallic materials in the exomass and/or endomass.

The recent advances in the field of cell-based therapeutics open promising perspectives for oral tissue regeneration. The development of large animal models, which overcome the limits of the rodent models and allow to emulate clinical situations, is crucial for the validation of regenerative strategies to move toward clinical application. Currently, porcine, canine, and ovine models are mainly developed for oral regeneration and their specific characteristics have an impact on the outcomes of the studies. Thus, this systematic review investigates the application of porcine, canine, and ovine models in present cell-based oral regeneration, according to the species characteristics and the targeted tissue to regenerate. A customized search of PubMed, EMBASE, Scopus, and Web of Science databases from January 2015 to March 2020 was conducted. Relevant articles about cell-based oral tissues engineering in porcine, canine, and ovine models were evaluated. Among the evaluated articles, 58 relevant studies about cell-based oral regeneration in porcine, canine, and ovine models matched the eligibility criteria and were selected for full analysis. Porcine models, the most similar species with humans, were mostly used for bone and periodontium regeneration; tooth regeneration was reported only in pig, except for one study in dog. Canine models were the most transversal models, successfully involved for all oral tissue regeneration and notably in implantology. However, differences with humans and ethical concerns affect the use of these models. Ovine models, alternative to porcine and canine ones, were mainly used for bone and, scarcely, periodontium regeneration. The anatomy and physiology of these animals restrain their involvement. If consistency was found in defect specificities and cell trends among different species animal models of bone, dentin-pulp complex, or tooth regeneration, variability appeared in periodontium. Regeneration assessment methods were more elaborate in porcines and canines than in ovines. Risk of bias was low for selection, attrition and reporting, but unclear for performance and detection. Overall, if none of the large animal models can be considered an ideal one, they are of deemed importance for oral cell-based tissue engineering and researchers should consider their relevance to establish favorable conditions for a given preclinical cell-based therapeutics. Impact statement This systematic review investigates porcine, canine, and ovine models for current oral cell-based regeneration procedures, and researchers could refer to it for the choice of the most pertinent preclinical model for a given cell-based therapeutics. ispartof: TISSUE ENGINEERING PART B-REVIEWS vol:28 issue:3 pages:489-505 ispartof: location:United States status: published

Mit dem Aufkommen der DVT hat sich diese zunachst in universitaren Zentren, spater bei niedergelassenen MKG- und Oralchirurgen verbreitet. Mittlerweile ist sie langst uber diese Spezialitaten hinaus prasent und breit in der zahnarztlichen Diagnostik angekommen. Die seit Jahren beobachtete Zunahme an Indikationen ist hierbei vermutlich Ursache und Folge zugleich. Das Kapitel beschreibt grundsatzliche Uberlegungen zu den Moglichkeiten, die die DVT bietet und ihre Rechtfertigung und Optimierung. Fur detailliertere Indikationen wird auf publizierte Leitlinien verwiesen, die diese im Konsens vieler Kolleginnen und Kollegen formuliert haben. Auserdem wird auf die Anwendung der Digitalen Volumentomographie bei Kindern eingegangen. Diese Patientengruppe weist das hochste Strahlenrisiko auf und verdient daher eine gesonderte Auseinandersetzung zu diesem Thema.

Assessing the possible biological effects of exposure to low doses of ionizing radiation (IR) is one of the prime challenges in radiation protection, especially in medical imaging. Today, radiobiological data on cone beam CT (CBCT) related biological effects are scarce. In children and adults, the induction of DNA double strand breaks (DSBs) in buccal mucosa cells and 8-oxo-7,8-dihydro-2'-deoxyguanosine (8-oxo-dG) and antioxidant capacity in saliva samples after CBCT examination were examined. No DNA DSBs induction was observed in children nor adults. In children only, an increase in 8-oxo-dG levels was observed 30 minutes after CBCT. At the same time an increase in antioxidant capacity was observed in children, whereas a decrease was observed in adults. Our data indicate that children and adults react differently to IR doses associated with CBCT. Fully understanding these differences could lead to an optimal use of CBCT in different age categories as well as improved radiation protection guidelines. ispartof: SCIENTIFIC REPORTS vol:10 issue:1 ispartof: location:England status: published

The objective of this study was to evaluate the influence of voxel size on artifacts arising from the exomass in cone beam computed tomography (CBCT).An imaging phantom was scanned using 2 CBCT units, each adjusted to 2 voxel sizes: 0.2 and 0.3 mm. From 1 to 3 metal inserts of titanium, cobalt-chromium, or amalgam were placed in the exomass and additional CBCT scans were acquired. Mean voxel gray values were obtained from 16 homogeneous areas of the phantom and averaged, and the standard deviation was calculated to obtain voxel gray value variability. The data were analyzed using 2-way analysis of variance, Tukey, and Dunnett tests (α =.05).Overall, mean voxel gray values and voxel gray value variability did not differ significantly between CBCT scans obtained with voxel sizes of 0.2 and 0.3 mm for either CBCT model tested (P.05). Despite some exceptions in which significant differences were observed between the 2 voxel sizes (P.05), the mean voxel gray values and voxel gray value variability resulting from different metal compositions and, in most situations, for different numbers of metal inserts in the exomass were not affected.Voxel size has little influence on exomass-related CBCT artifacts.

Summary Introduction The increasing use of three-dimensional (3D) imaging in orthodontics has led to the development of 3D superimposition techniques. These techniques use stable anatomic structures as references in order to compare Cone Beam CT (CBCT) scans of the same subject at different time-points. Three methods have been described in the literature: landmark-based, surface-based and voxel-based 3D superimpositions. Objective This article focuses on the voxel-based approach, which is the most described and the only one that can be fully automatized. The aim of this paper is to offer clinicians a practical tutorial on craniofacial voxel-based 3D superimposition. Material and Methods We provide an updated overview of the available implementation methods, describing their methodology, validations, main steps, advantages and drawbacks. The historical open-source method is the most widespread for research purposes, but takes around three hours to achieve for an experienced operator. Several commercially-available software perform superimpositions in a few minutes. Results We used two of the available methods to conduct the superimposition process with three representative clinical cases in order to illustrate the different types of results that can be obtained. Conclusions Commercially-available software provide user-friendly and fully automatized superimposition methods, allowing clinicians to perform it easily and helping to reduce human error in image analysis. Still, quantitative evaluation of the results remains the main challenge of this technique.

Objectives: Three-dimensional models of mandibular condyles provide a way for condylar remodeling follow-up. The overall aim was to develop and validate a user-friendly workflow for cone beam CT (CBCT)-based semi-automatic condylar registration and segmentation. Methods: A rigid voxel-based registration (VBR) technique for registration of two post-operative CBCT-scans was tested. Two modified mandibular rami, with or without gonial angle, were investigated as the volume of interest for registration. Inter- and intraoperator reproducibility of this technique was tested on 10 mandibular rami of orthognathic patients by means of intraclass correlation coefficients (ICC’s) and descriptive statistics of the transformation values from the VBR. The difference in reproducibility between the two modified rami was evaluated using a paired t-test (p < 0.05). For the segmentation, eight fresh frozen cadaver heads were scanned with CBCT and micro-CT. These data were used to test the inter- and intraoperator reproducibility (ICC’s) and accuracy (Bland–Altman plot) of a newly designed workflow based on semi-automated contour enhancement. Results: Excellent ICC’s (0.94–0.99) were obtained for the voxel-based registration technique using both modified rami. If the gonial angle was not included in the volume of interest, there was a trend of increased operator error suggested by significant higher interoperator differences in translation values (p = 0,0036). The segmentation workflow proved to be highly reproducible with excellent ICC’s (0.99), low absolute mean volume differences between operators (23.19 mm3), within operators (28.93 mm3) and low surface distances between models of different operators (Conclusions: This study provides a validated user-friendly and reproducible method of creating three-dimensional-surface models of mandibular condyles out of longitudinal CBCT-scans.

BACKGROUND: Children are more sensitive to ionizing radiation effects due to their high radiosensitivity. PURPOSE: To estimate doses and risks for dental radiological examinations in children. MATERIAL AND METHODS: A pediatric population consisting of 7150 children and young adults which underwent 12252 dental radiological examinations (4220 intraoral, 1324 cephalometric, 5284 panoramic radiographs and 1424 CBCTs) within two years were included. Two groups were studied: CBCT group (exposed to CBCT ± conventional radiographs) and 2D group (exposed only to 2D radiological examinations). The effective doses were corrected according to age at exposure and settings parameters (mA;FOV) by using logarithmic fit equations for dose interpolation. The individual cumulative dose, per-caput collective dose and radiation risk were calculated for each group. RESULTS: The median effective and cumulative doses for conventional radiographs were lower than 20 μSv and did not vary with age. Children exposed to CBCT had a higher median effective dose (127.2 μSv) and cumulative dose (156.5 μSv) with a significant increased cumulative dose between 11 and 14 years. The CBCT contributed with 70% to the collective dose and per caput collective dose was 184 μSv for CBCT exposures. The Life Attributable Risk (LAR) and Relative Radiation Level (RRL) were significantly higher for children exposed to CBCT under the age of 18. The highest radiation dose for CBCT was equivalent with 34.1 days of natural background radiation and it was found for ages between 11 and 15. CONCLUSION: The CBCT doses and radiation risk vary but remain in the lower levels of the relative risk of medical exposures. ispartof: EUROPEAN JOURNAL OF RADIOLOGY vol:103 pages:112-117 ispartof: location:Ireland status: published

Les enfants et adolescents en cours de traitement orthodontique peuvent présenter des pathologies de la muqueuse orale d’origine infectieuse, héréditaire, maligne, traumatique ou idiopathique. L’orthodontiste doit pouvoir dépister ces lésions, les reconnaître, afin d’instaurer un traitement adapté et/ou d’adresser le patient à un spécialiste. L’objectif de cet article est de décrire ces différentes lésions pour un diagnostic et une prise en charge plus aisés.

Introduction: Osteoma is a benign slow-growing osteogenic neoplasm characterized by the proliferation of cancellous and/or cortical bone. Jaw bones are seldom affected. Observation: We observed a rare case of a patient with a peripheral mandibular osteoma, which was surgically removed. Comments: Frequently asymptomatic, a peripheral osteoma looks like a bony swelling that may be sessile or pedunculated. Imaging examinations show a well-circumscribed radio-opaque mass. Symptomatic osteomas must be surgically excised and submitted for histological evaluation. Conclusion: Excessive osseous healing following a tooth extraction may explain this rare form of osteoma.

Mandibular ramus sagittal osteotomy is a common surgical intervention in orthognathic and maxillofacial surgery, which consists in creating a directed fracture along the alveolar inferior nerve can...

DIMITRA (dentomaxillofacial paediatric imaging: an investigation towards low-dose radiation induced risks) is a European multicenter and multidisciplinary project focused on optimizing cone-beam CT exposures for children and adolescents. With increasing use of cone-beam CT for dentomaxillofacial diagnostics, concern arises regarding radiation risks associated with this imaging modality, especially for children. Research evidence concerning cone-beam CT indications in children remains limited, while reports mention inconsistent recommendations for dose reduction. Furthermore, there is no paper using the combined and integrated information on the required indication-oriented image quality and the related patient dose levels. In this paper, therefore, the authors initiate an integrated approach based on current evidence regarding image quality and dose, together with the expertise of DIMITRA's members searching for a state of the art. The aim of this DIMITRA position statement is to provide indication-oriented and patient-specific recommendations regarding the main cone-beam CT applications in the pediatric field. The authors will review this position statement document when results regarding multidisciplinary approaches evolve, in a period of 5 years or earlier.

Cell-based partial pulp regeneration is one of the promising approaches to obtain newly formed functional dentin-pulp complex. It relies on the preservation of the healthy tissue while regenerating the damaged pulp. The aim of this study was to investigate whether this regenerative process could be achieved by implanting porcine dental pulp cells (pDPCs) in pulp defects in the minipig. By split-mouth model, self-assembling injectable nanopeptide hydrogel, with and without pDPCs, was implanted after cameral pulpotomy in premolars and molars. At day 21 after surgery, 3-dimensional morphometric characterization, Masson's trichrome staining, and immunolabeling for DSP and BSP (dentin sialoprotein and bone sialoprotein) were performed on treated teeth. This study demonstrated no pulp regeneration but systematic reparative dentinogenesis. In fact, regardless of the presence of pDPCs in the scaffold, an osteodentin bridge-the microarchitecture of which significantly differed from the native dentin-was systematically obtained. Furthermore, the presence of pDPCs significantly affected the microstructure of the dentin bridges. In the radicular area of each treated tooth, hyperemia in the remaining pulp and external root resorptions were observed. Under the conditions tested in this work, pulp regeneration was not achieved, which highlights the need of further investigations to develop favorable regenerative microenvironment.

Bone condensation is thought to densify interfacial bone and thus improve implant primary stability, but scant data substantiate either claim. We developed a murine oral implant model to test these hypotheses. Osteotomies were created in healed maxillary extraction sites 1) by drilling or 2) by drilling followed by stepwise condensation with tapered osteotomes. Condensation increased interfacial bone density, as measured by a significant change in bone volume/total volume and trabecular spacing, but it simultaneously damaged the bone. On postimplant day 1, the condensed bone interface exhibited microfractures and osteoclast activity. Finite element modeling, mechanical testing, and immunohistochemical analyses at multiple time points throughout the osseointegration period demonstrated that condensation caused very high interfacial strains, marginal bone resorption, and no improvement in implant stability. Collectively, these multiscale analyses demonstrate that condensation does not positively contribute to implant stability.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

Vertebrate teeth are attached to the jawbones using a variety of methods but in mammals, a fibrous connection is the norm. This fibrous periodontal ligament (PDL) allows teeth to move in the jawbones in response to natural eruptive forces, mastication, and orthodontic tooth movement. In some disease states the PDL either calcifies or is replaced by a mineralized tissue and the result is ankylosis, where the tooth is fused to the alveolar bone. To understand how the PDL maintains this fibrous state, we examined a strain of mice in which tooth movement is arrested. DaβcatOt mice express a stabilized form of β-catenin in DMP1-positive alveolar bone osteocytes and cementocytes, which results in elevated Wnt signaling throughout the periodontium. As a consequence, there is an accrual of massive amounts of cellular cementum and alveolar bone, the PDL itself calcifies and teeth become ankylosed. These data suggest that to maintain its fibrous nature, Wnt signaling must normally be repressed in the PDL space. Fil: Wu, Yan. Stomatology Hospital of Chongqing Medical University; China. University of Stanford; Estados Unidos Fil: Yuan, Xue. University of Stanford; Estados Unidos Fil: Perez, Kristy C.. University of Stanford; Estados Unidos Fil: Hyman, Sydnee. University of Stanford; Estados Unidos Fil: Wang, Liao. University of Stanford; Estados Unidos. Sichuan University; China Fil: Pellegrini, Gretel Gisela. Indiana University; Estados Unidos. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Houssay. Instituto de Inmunología, Genética y Metabolismo. Universidad de Buenos Aires. Facultad de Medicina. Instituto de Inmunología, Genética y Metabolismo; Argentina Fil: Salmon, Benjamin. Paris Descartes University; Francia Fil: Bellido, Teresita. Indiana University; Estados Unidos Fil: Helms, Jill A.. University of Stanford; Estados Unidos

Objectives: Cone-beam CT (CBCT) is a medical imaging technique used in dental medicine. However, there are no conclusive data available indicating that exposure to X-ray doses used by CBCT are harmless. We aim, for the first time, to characterize the potential age-dependent cellular and subcellular effects related to exposure to CBCT imaging. Current objective is to describe and validate the protocol for characterization of cellular and subcellular changes after diagnostic CBCT. Methods: Development and validation of a dedicated two-part protocol: 1) assessing DNA double strand breaks (DSBs) in buccal mucosal (BM) cells and 2) oxidative stress measurements in saliva samples. BM cells and saliva samples are collected prior to and 0.5 h after CBCT examination. BM cells are also collected 24 h after CBCT examination. DNA DSBs are monitored in BM cells via immunocytochemical staining for γH2AX and 53BP1. 8-oxo-7,8-dihydro-2’-deoxyguanosine (8-oxo-dG) and total antioxidant capacity are measured in saliva to assess oxidative damage. Results: Validation experiments show that sufficient BM cells are collected (97.1 ± 1.4 %) and that γH2AX/53BP1 foci can be detected before and after CBCT examination. Collection and analysis of saliva samples, either sham exposed or exposed to IR, show that changes in 8-oxo-dG and total antioxidant capacity can be detected in saliva samples after CBCT examination. Conclusion: The DIMITRA Research Group presents a two-part protocol to analyze potential age-related biological differences following CBCT examinations. This protocol was validated for collecting BM cells and saliva and for analyzing these samples for DNA DSBs and oxidative stress markers, respectively.

Objectives: Cone-beam CT (CBCT), a radiographic tool for diagnosis, treatment, and follow-up in dental practice, was introduced also in pediatric radiology, especially orthodontics. Such patients subjected to repetitive X-rays examinations may receive substantial levels of radiation doses. Ionizing radiation (IR), a recognized carcinogenic factor causing DNA double-strand breaks (DSBs) could be harmful to undifferentiated cells such as dental pulp stem cells (DPSCs) since inaccurately repaired or unrepaired DSBs may lead to malignant transformation. The H2AX and MRE11 proteins generated following DSBs formation and pro-inflammatory cytokines (CKs) secreted after irradiation are relevant candidates to monitor the cellular responses induced by CBCT. Methods: DPSCs were extracted from human exfoliated deciduous teeth and their phenotype was assessed by immunocytochemistry and flow-cytometry. Cells were exposed to IR doses: 5.4-107.7 mGy, corresponding to 0.5-8 consecutive skull exposures, respectively. H2AX and MRE11 were detected in whole cells, while IL-1 alpha, IL-6, IL-8, TNF alpha in supernatants, using enzyme-linked immunosorbent assay (ELISA) at different time points after exposure. Results: The phosphorylation level of H2AX in DPSCs increased considerably at 0.5 h after exposure (p < 0.001 for 3, 5, 8 skull exposures and p < 0.05 for 1 skull exposure, respectively). MRE11 response could only be detected for the highest IR dose (p < 0.001) in the same interval. CKs secretion increased upon CBCT exposure according to doses and time. Conclusions: The DPSCs exposure to CBCT induces transient DNA damage and persistent inflammatory reaction in DPSCs drawing the attention on the potential risks of IR exposures and on the importance of dose monitoring in pediatric population. The research leading to these results has received funding from the European Atomic Energy Community's Seventh Framework Programme FP7/2007-2011 under grant agreement no 604984 (OPERRA: Open Project for the European Radiation Research Area).

Background Previous studies have highlighted the increased risk of contracting the COVID-19 for health-care workers and suggest that oral health-care workers may carry the greatest risk. Considering the transmission route of the SARS-CoV-2 infection, a similar increased risk can be hypothesized for other respiratory infections. However, no study has specifically assessed the risk of contracting COVID-19 within the dental profession. Methods An online survey was conducted within a population of French dental professionals between April 1 and April 29, 2020. Univariable and multivariable logistic regression analyses were performed to explore risk indicators associated with laboratory-confirmed COVID-19 and COVID-19-related clinical phenotypes (i.e. phenotypes present in 15% or more of SARS-CoV-2-positive cases). Results 4172 dentists and 1868 dental assistants responded to the survey, representing approximately 10% of French oral health-care workers. The prevalence of laboratory-confirmed COVID-19 was 1.9% for dentists and 0.8% for dental assistants. Higher prevalence was found for COVID-19-related clinical phenotypes both in dentists (15.0%) and dental assistants (11.8%). Chronic kidney disease and obesity were associated with increased odds of laboratory-confirmed COVID-19, whereas working in a practice limited to endodontics was associated with decreased odds. Chronic obstructive pulmonary disease, use of public transportation and having a practice limited to periodontology were associated with increased odds of presenting a COVID-19-related clinical phenotype. Moreover, changes in work rhythm or clinical practice were associated with decreased odds of both outcomes. Conclusions Although oral health-care professionals were surprisingly not at higher risk of COVID-19 than the general population, specific risk indicators could exist, notably among high aerosol-generating dental subspecialties such as periodontology. Considering the similarities between COVID-19-related clinical phenotypes other viral respiratory infections, lessons can be learned from the COVID-19 pandemic regarding the usefulness of equipping and protecting oral health-care workers, notably during seasonal viral outbreaks, to limit infection spread. Impact Results from this study may provide important insights for relevant health authorities regarding the overall infection status of oral health-care workers in the current pandemic and draw attention to particular at-risk groups, as illustrated in the present study. Protecting oral health-care workers could be an interesting public health strategy to prevent the resurgence of COVID-19 and/or the emergence of new pandemics.

With the march of time our bodies start to wear out: eyesight fades, skin loses its elasticity, teeth and bones become more brittle and injuries heal more slowly. These universal features of aging can be traced back to our stem cells. Aging has a profound effect on stem cells: DNA mutations naturally accumulate over time and our bodies have evolved highly specialized mechanisms to remove these damaged cells. Whilst obviously beneficial, this repair mechanism also reduces the pool of available stem cells and this, in turn, has a dramatic effect on tissue homeostasis and on our rate of healing. Simply put: fewer stem cells means a decline in tissue function and slower healing. Despite this seemingly intractable situation, research over the past decade now demonstrates that some of the effects of aging are reversible. Nobel prize-winning research demonstrates that old cells can become young again, and lessons learned from these experiments-in-a-dish are now being translated into human therapies. Scientists and clinicians around the world are identifying and characterizing methods to activate stem cells to reinvigorate the body's natural regenerative process. If this research in dental regenerative medicine pans out, the end result will be tissue homeostasis and healing back to the levels we appreciated when we were young.

Objectives: To evaluate the influence of exomass-related metal artefacts on the detection of simulated vertical root fracture (VRF) in cone-beam computed tomography (CBCT). Methods: Twenty teeth were endodontically instrumented and VRF was induced in half of them. All teeth were individually placed in an empty socket of a human mandible. Metallic materials were differently arranged in the exomass [zone outside of the field of view (FOV) but between the X-ray source and the receptor] and/or endomass (zone inside of the FOV), and CBCT scans were obtained. Four radiologists evaluated the presence of VRF using a 5-point scale. Sensitivity, specificity, and area under the receiver operating curve (AUC) were compared using ANOVA. Also, the tooth of interest was replaced with a tube filled with a radiopaque solution and all CBCT scans were repeated to analyse the data objectively. Mean grey and noise values were obtained from the tube and compared using ANOVA followed by Tukey’s test (α = 0.05). Results: Mean grey values were significantly lower and noise was significantly higher when metallic materials were present in the endomass or both the exomass and endomass. Sensitivity, specificity, and AUC were not influenced by the artefacts from the metallic materials irrespective of the arrangement condition. Conclusions: Exomass-related metal artefacts did not influence the diagnosis of simulated VRF in CBCT.

Introduction Physiological root resorption is a common occurrence in mammalian teeth, which suggests that there must be a corollary consisting of physiological cementum repair. The mechanism(s) responsible for this physiological repair process is unknown and was the focus of this study. Methods Using a rat model, we explored first the prevalence of physiological root resorption and then asked whether this prevalence changed as a result of an osteoporotic phenotype. The cellular mechanisms of resorption were characterized using a combination of finite element modeling coupled with in-vivo histologic, molecular, and cellular analyses in rats. A potential molecular mechanism for cementum repair was uncovered using a strain of transgenic mice in which Wnt-responsive cells could be labeled and followed over time. Results In rats, most resorption lacunae were concentrated on the distal surfaces of the roots. Rat molars undergo a physiological tooth drift distally, and using finite element modeling, we calculated the magnitude of the compressive strains that accumulated on these surfaces in response to mastication. Although the overall strain magnitudes were low, they were constant and coincided with the presence of resorption lacunae. Where resorption lacunae were present, progeny from a Wnt-responsive population of stem cells, embedded in the periodontal ligament, directly contributed to the repair of the lacunae. Conclusions Despite the fact that both are clastic conditions, an osteoporotic phenotype in rats was not associated with an increase in the prevalence of physiological root resorption. The location of the resorption lacunae corresponded to sites of low but constant compressive strains produced by physiological distal drift. At least 1 mechanism responsible for physiological cementum repair involved the contribution of Wnt-responsive stem or progenitor cells originating in the periodontal ligament. These data point toward a potential Wnt-based strategy to regenerate cementum in subjects with disease or damage.

The objective of this systematic review was to evaluate the diagnostic value of CBCT compared with 2D imaging and clinical gold standard techniques in peri-implant bone defect detection and measurement.Literature search was performed using MEDLINE, Embase and Web of Science databases up to July 2017. Clinical, ex vivo, in vitro and animal studies that assessed and measured peri-implant bone defects using different imaging modalities were included in this review. Two reviewers performed data extraction and qualitative analysis. The methodological quality of each study was reviewed using the QUADAS-2 tool.The initial search revealed 2849 unique papers. Full-text analysis was performed on 60 articles. For the present review, nine studies were considered eligible to be included for qualitative analysis. CBCT performed similar to intraoral radiography in mesiodistal defect detection and measurements. Additional buccolingual visualisation and volumetric and morphological assessment of peri-implant bone defects are major advantages of 3D visualisation with CBCT. Nevertheless, one must be aware of metal artefacts masking osseointegration, shallow bony defects and other peri-implant radiolucencies, thus impeding early diagnosis of intrabony lesions.The present review did not provide evidence to support the use of CBCT as standard postoperative procedure to evaluate peri-implant bone. Up to date, we are clinically forced to remain with intraoral radiography, notwithstanding the inherent limitations related to restricted field of view and two-dimensional overlap. A 3D imaging approach for postoperative implant evaluation is crucial, making further development of an optimised and artefact-free CBCT protocol indispensable.

Background: In implant dentistry, three-dimensional (3D) imaging can be realised by dental cone beam computed tomography (CBCT), offering volumetric data on jaw bones and teeth with relatively low radiation doses and costs. The latter may explain why the market has been steadily growing since the first dental CBCT system appeared two decades ago. More than 85 different CBCT devices are currently available and this exponential growth has created a gap between scientific evidence and existing CBCT machines. Indeed, research for one CBCT machine cannot be automatically applied to other systems. Methods: Supported by a narrative review, recommendations for justified and optimized CBCT imaging in oral implant dentistry are provided. Results: The huge range in dose and diagnostic image quality requires further optimization and justification prior to clinical use. Yet, indications in implant dentistry may go beyond diagnostics. In fact, the inherent 3D datasets may further allow surgical planning and transfer to surgery via 3D printing or navigation. Nonetheless, effective radiation doses of distinct dental CBCT machines and protocols may largely vary with equivalent doses ranging between 2 to 200 panoramic radiographs, even for similar indications. Likewise, such variation is also noticed for diagnostic image quality, which reveals a massive variability amongst CBCT technologies and exposure protocols. For anatomical model making, the so-called segmentation accuracy may reach up to 200 μm, but considering wide variations in machine performance, larger inaccuracies may apply. This also holds true for linear measures, with accuracies of 200 μm being feasible, while sometimes fivefold inaccuracy levels may be reached. Diagnostic image quality may also be dramatically hampered by patient factors, such as motion and metal artefacts. Apart from radiodiagnostic possibilities, CBCT may offer a huge therapeutic potential, related to surgical guides and further prosthetic rehabilitation. Those additional opportunities may surely clarify part of the success of using CBCT for presurgical implant planning and its transfer to surgery and prosthetic solutions. Conclusions: Hence, dental CBCT could be justified for presurgical diagnosis, preoperative planning and peroperative transfer for oral implant rehabilitation, whilst striving for optimisation of CBCT based machine-dependent, patient-specific and indication-oriented variables.