Search

Heterogeneous carbon nitrides have numerous advantages as photocatalysts, including strong light absorption, tunable band edges, and scalability, but their performance and continued development are limited by fast charge recombination and an under-developed mechanistic understanding of photodriven interfacial electron transfer. These shortcomings are a result of complex photophysics, leading to rate asynchrony between oxidation and reduction, as well as redox processes driven out of electronic trap states rather than excited states. We show that a well-defined triplet excited state in cyanamide-modified carbon nitride is realized with appropriately sized particles. The utility of this long-lived excited state is demonstrated by its ability to drive a hydroamidation photoredox cycle. By the tuning of the particle size of CNx, the oxidation-reduction photochemistry of carbon nitride may be balanced to achieve a redox-neutral closed photocatalytic cycle. These results uncover a triplet excited state chemistry for appropriately sized CNx particles that preludes a rich energy and electron transfer photochemistry for these materials.

Nickel-catalysed aryl amination and etherification are driven with sunlight using a surface-modified carbon nitride to extend the absorption of the photocatalyst into a wide range of the visible region. In contrast to traditional homogeneous photochemical methodologies, the lower cost and higher recyclability of the metal-free photocatalyst, along with the use of readily available sunlight, provides an efficient and sustainable approach to promote nickel-catalysed cross-couplings., Nickel-catalysed aryl amination and etherification are driven with sunlight using a surface-modified carbon nitride to extend the absorption of the photocatalyst such that they may be driven with solar light.

Performing quantitative in situ spectroscopic analysis on minuscule sample volumes is a common difficulty in photochemistry. To address this challenge, we use a hollow-core photonic crystal fiber (HC-PCF) that guides light at the center of a microscale liquid channel and acts as an optofluidic microreactor with a reaction volume of less than 35 nL. The system was used to demonstrate in situ optical detection of photoreduction processes that are key components of many photocatalytic reaction schemes. The photoreduction of viologens (XV2+) to the radical XV•+ in a homogeneous mixture with carbon nanodot (CND) light absorbers is studied for a range of different carbon dots and viologens. Time-resolved absorption spectra, measured over several UV irradiation cycles, are interpreted with a quantitative kinetic model to determine photoreduction and photobleaching rate constants. The powerful combination of time-resolved, low-volume absorption spectroscopy and kinetic modeling highlights the potential of optofluidic microreactors as a highly sensitive, quantitative, and rapid screening platform for novel photocatalysts and flow chemistry in general.

Artificial photosynthesis is the mimicry of the natural process of solar energy conversion into chemical energy carriers. Photocatalytic systems that combine light-harvesting materials and catalysts in solution or suspension provide a promising route towards this goal. A key requirement for a sustainable solar fuel production system is a low-cost, stable and non-toxic light harvester. Photoluminescent carbon nanoparticles, carbon dots (CDs), are promising emerging light-harvesters for photocatalytic fuel production systems. CDs possess many desirable properties for this purpose, such as inexpensive, scalable synthetic routes, low-toxicity and tuneable surface chemistry. In this tutorial review, the integration of CDs in photocatalytic fuel generation systems with metallic, molecular and enzymatic catalysts is discussed. An overview of CD types, synthesis and properties is given along with a discussion of tuneable CD properties that can be optimised for applications in photocatalysis. Current understanding of the photophysical electron transfer processes present in CD photocatalytic systems is outlined and various avenues for their further development are highlighted., Christian Doppler Research Association, OMV Group, Poynton PhD scholarship, Oppenheimer PhD scholarship

Carbon quantum dots (CQDs) are new-generation light absorbers for photocatalytic H2 evolution in aqueous solution, but the performance of CQD-molecular catalyst systems is currently limited by the decomposition of the molecular component. Clean oxidation of the electron donor by donor recycling prevents the formation of destructive radical species and non-innocent oxidation products. This approach allowed a CQD-molecular nickel bis(diphosphine) photocatalyst system to reach a benchmark lifetime of more than 5 days and a record turnover number of 1094±61 molH2 (molNi )(-1) for a defined synthetic molecular nickel catalyst in purely aqueous solution under AM1.5G solar irradiation.

We gratefully acknowledge the following funding sources: The Marshall Aid Commemoration Commission (CMC), the Advanced Institute for Materials Research-­‐Cambridge Joint Research Centre (KLO), the Ernest Oppenheimer Fund, Cambridge (BCMM), and the EPSRC (EP/H00338X/2; ER).

Single-source precursor syntheses have been devised for the preparation of structurally similar graphitic carbon dots (CDs), with (g-N-CD) and without (g-CD) core nitrogen doping for artificial photosynthesis. An order of magnitude improvement has been realized in the rate of solar (AM1.5G) H$_{2}$ evolution using g-N-CD (7950 μmolH2 (gCD)$^{−1}$ h$^{−1}$ ) compared to undoped CDs. All graphitized CDs show significantly enhanced light absorption compared to amorphous CDs (a-CD) yet undoped g-CD display limited photosensitizer ability due to low extraction of photogenerated charges. Transient absorption spectroscopy showed that nitrogen doping in g-N-CD increases the efficiency of hole scavenging by the electron donor and thereby significantly extends the lifetime of the photogenerated electrons. Thus, nitrogen doping allows the high absorption coefficient of graphitic CDs to be translated into high charge extraction for efficient photocatalysis.

Light-driven enzymatic catalysis is enabled by the productive coupling of a protein to a photosensitizer. Photosensitizers used in such hybrid systems are typically costly, toxic, and/or fragile, with limited chemical versatility. Carbon dots (CDs) are low-cost, nanosized light-harvesters that are attractive photosensitizers for biological systems as they are water-soluble, photostable, nontoxic, and their surface chemistry can be easily modified. We demonstrate here that CDs act as excellent light-absorbers in two semibiological photosynthetic systems utilizing either a fumarate reductase (FccA) for the solar-driven hydrogenation of fumarate to succinate or a hydrogenase (H

The novel synthesis of formic acid has been achieved in a room temperature ionic liquid via the reaction of electro-activated carbon dioxide and protons on pre-anodised platinum. Only mild reaction conditions of room temperature and 1 atm CO(2) were used. This work highlights the effect of pre-anodisation on Pt surfaces.

Solar water-splitting represents an important strategy toward production of the storable and renewable fuel hydrogen. The water oxidation half-reaction typically proceeds with poor efficiency and produces the unprofitable and often damaging product, O2. Herein, we demonstrate an alternative approach and couple solar H2 generation with value-added organic substrate oxidation. Solar irradiation of a cyanamide surface-functionalized melon-type carbon nitride ((NCN)CNx) and a molecular nickel(II) bis(diphosphine) H2-evolution catalyst (NiP) enabled the production of H2 with concomitant selective oxidation of benzylic alcohols to aldehydes in high yield under purely aqueous conditions, at room temperature and ambient pressure. This one-pot system maintained its activity over 24 h, generating products in 1:1 stoichiometry, separated in the gas and solution phases. The (NCN)CNx-NiP system showed an activity of 763 μmol (g CNx)(-1) h(-1) toward H2 and aldehyde production, a Ni-based turnover frequency of 76 h(-1), and an external quantum efficiency of 15% (λ = 360 ± 10 nm). This precious metal-free and nontoxic photocatalytic system displays better performance than an analogous system containing platinum instead of NiP. Transient absorption spectroscopy revealed that the photoactivity of (NCN)CNx is due to efficient substrate oxidation of the material, which outweighs possible charge recombination compared to the nonfunctionalized melon-type carbon nitride. Photoexcited (NCN)CNx in the presence of an organic substrate can accumulate ultralong-lived "trapped electrons", which allow for fuel generation in the dark. The artificial photosynthetic system thereby catalyzes a closed redox cycle showing 100% atom economy and generates two value-added products, a solar chemical, and solar fuel.

Carbon quantum dots (CQDs) are established as excellent photosensitizers in combination with a molecular catalyst for solar light driven hydrogen production in aqueous solution. The inexpensive CQDs can be prepared by straightforward thermolysis of citric acid in a simple one-pot, multigram synthesis and are therefore scalable. The CQDs produced reducing equivalents under solar irradiation in a homogeneous photocatalytic system with a Ni-bis(diphosphine) catalyst, giving an activity of 398 μmolH2 (gCQD)(-1) h(-1) and a "per Ni catalyst" turnover frequency of 41 h(-1). The CQDs displayed activity in the visible region beyond λ455 nm and maintained their full photocatalytic activity for at least 1 day under full solar spectrum irradiation. A high quantum efficiency of 1.4% was recorded for the noble- and toxic-metal free photocatalytic system. Thus, CQDs are shown to be a highly sustainable light-absorbing material for photocatalytic schemes, which are not limited by cost, toxicity, or lack of scalability. The photocatalytic hybrid system was limited by the lifetime of the molecular catalyst, and intriguingly, no photocatalytic activity was observed using the CQDs and 3d transition metal salts or platinum precursors. This observation highlights the advantage of using a molecular catalyst over commonly used heterogeneous catalysts in this photocatalytic system.

This work undertakes mechanistic studies of H(+) reduction on a palladium microelectrode in a room temperature ionic liquid. It was found that the electrode was initially in a partially passivated state in [NTf(2)](-) based RTILs and that pre-anodisation of the electrode surface has a dramatic effect on the reversibility of the system, also triggering a change from hydrogen evolution to hydrogen absorption. Theoretical modelling supported the idea of Pd/H formation under these conditions. Utilising Pd/H as an activated hydrogen source, a proof-of-concept method for hydrogenation of multiple bond containing organic molecules by in situ generation of Pd/H via reduction of H(+) on palladium in a room temperature ionic liquid has been demonstrated.

The Sn/Sn(II) couple is studied in the room temperature ionic liquids N-butyl-N-methylpyrrolidinium dicyanamide, [C(4)mpyrr][N(CN)(2)] and N-butyl-N-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide, [C(4)mpyrr][NTf(2)] using cyclic voltammetry. The Sn(II) species is introduced into each of the ionic liquids by dissolving either SnCl(2) or Sn(CF(3)SO(3))(2). The diffusion coefficient of the Sn(II) species produced is found to vary with the ionic liquid, partly reflecting the difference in the viscosity of the two liquids, but also to vary with the Sn(II) salts used, indicating that different Sn(II) species may be present. The mechanism for the stripping of deposited tin is found to change with potential and also vary with the Sn(II) salt/ionic liquid combination used. In [C(4)mpyrr][N(CN)(2)] the mechanism for the tin stripping process is broadly similar for both of the Sn(II) salts used indicating that the morphology of the tin deposit is similar and that the stripping mechanism is largely independent of the Sn(II) salt anion. In [C(4)mpyrr][NTf(2)] a large difference was seen in the voltammetry of the different Sn(II) salts. Tafel analysis is used to show that the mechanism of the oxidation of Sn is sensitive to the solvent, the salt and the potential. The rate determining step was found to vary between the first electron transfer, the second electron transfer and a step likely involving reactions of a Sn(+) intermediate.