Search

Greenhouse gas satellites can provide consistently global CO2 data which are important inputs for the top-down inverse estimation of CO2 emissions and their dynamic changes. By tracking greenhouse gas emissions, policymakers and businesses can identify areas where reductions are needed most and implement effective strategies to reduce their impact on the environment. Monitoring greenhouse gases provides valuable data for scientists studying climate change. The requirements for CO2 emissions monitoring and verification support capacity drive the payload design of future CO2 satellites. In this study, we quantitatively evaluate the performance of satellite in detecting CO2 plumes from power plants based on an improved Gaussian plume model, with focus on impacts of the satellite spatial resolution and the satellite-derived XCO2 precision under different meteorological conditions. The simulations of CO2 plumes indicate that the enhanced spatial resolution and XCO2 precision can significantly improve the detection capability of satellite, especially for small-sized power plants with emissions below 6 Mt CO2/yr. The satellite-detected maximum of XCO2 enhancement strongly varies with the wind condition. For a satellite with a XCO2 precision of 0.7 ppm and a spatial resolution of 2 km, it can recognize a power plant with emissions of 2.69 Mt CO2/yr at a wind speed of 2 m/s, while its emission needs be larger than 5.1 Mt CO2/yr if the power plant is expected to be detected at a wind speed of 4 m/s. Considering the uncertainties in the simulated wind field, the satellite-derived XCO2 measurements and the hypothesized CO2 emissions, their cumulative contribution to the overall accuracy of the satellite’s ability to identify realistic enhancement in XCO2 are investigated in the future. The uncertainties of ΔXCO2 caused by the uncertainty in wind speed is more significant than those introduced from the uncertainty in wind direction. In the case of a power plant emitting 5.1 Mt CO2/yr, with the wind speed increasing from 0.5 m/s to 4 m/s, the simulated ΔXCO2 uncertainty associated with the wind field ranges from 3.75 ± 2.01 ppm to 0.46 ± 0.24 ppm and from 1.82 ± 0.95 ppm to 0.22 ± 0.11 ppm for 1 × 1 km2 and 2 × 2 km2 pixel size, respectively. Generally, even for a wind direction with a higher overall uncertainty, satellite still has a more effective capability for detecting CO2 emission on this wind direction, because there is more rapid growth for simulated maximal XCO2 enhancements than that for overall uncertainties. A designed spatial resolution of satellite better than 1 km and a XCO2 precision higher than 0.7 ppm are suggested, because the CO2 emission from small-sized power plants is much more likely be detected when the wind speed is below 3 m/s. Although spatial resolution and observed precision parameters are not sufficient to support the full design of future CO2 satellites, this study still can provide valuable insights for enhancing satellite monitoring of anthropogenic CO2 emissions.

Accurate wind power prediction can scientifically arrange wind power output and timely adjust power system dispatching plans. Wind power is associated with its uncertainty, multi-frequency and nonlinearity for it is susceptible to climatic factors such as temperature, air pressure and wind speed. Therefore, this paper proposes a wind power prediction model combining multi-frequency combination and feature selection. Firstly, the variational mode decomposition (VMD) is used to decompose the wind power data, and the sub-components with different fluctuation characteristics are obtained and divided into high-, intermediate-, and low-frequency components according to their fluctuation characteristics. Then, a feature set including historical data of wind power and meteorological factors is established, which chooses the feature sets of each component by using the max-relevance and min-redundancy (mRMR) feature selection method based on mutual information selected from the above set. Each component and its corresponding feature set are used as an input set for prediction afterwards. Thereafter, the high-frequency input set is predicted using back propagation neural network (BPNN), and the intermediate-and low-frequency input sets are predicted using least squares support vector machine (LS-SVM). After obtaining the prediction results of each component, BPNN is used for integration to obtain the final predicted value of wind power, and the ramping rate is verified. Finally, through the comparison, it is found that the proposed model has higher prediction accuracy.

Multi-angle polarization measurement is an important technical means of satellite remote sensing applied to aerosol monitoring. By adding angle information and polarization measurements, aerosol optical and microphysical properties can be more comprehensively and accurately retrieved. The accuracy of aerosol retrieval can reflect the advantages and specific accuracy improvement of multi-angle polarization. In this study, the Multi-angle Imaging SpectroRadiometer (MISR) V23 aerosol products and the Polarization and Directionality of the Earth’s Reflectance (POLDER) GRASP “high-precision” archive were evaluated with the Aerosol Robotic Network (AERONET) observations over China. Validation of aerosol optical depth (AOD), absorbing aerosol optical depth (AAOD), and the Ångström exponent (AE) properties was conducted. Our results show that the AOD inversion accuracy of POLDER-3/GRASP is higher with the correlation coefficient (R) of 0.902, slope of 0.896, root mean square error (RMSE) of 0.264, mean absolute error (MAE) of 0.190, and about 40.71% of retrievals within the expected error (EE, ± 0.05+0.2×AODAERONET) lines. For AAOD, the performance of two products is poor, with better results for POLDER-3/GRASP data. POLDER-3/GRASP AE also has higher R of 0.661 compared with that of MISR AE (0.334). According to the validation results, spatiotemporal distribution, and comparison with other traditional scalar satellite data, the performance of multi-angle polarization observations is better and is suitable for the retrieval of aerosol properties.

Reducing noise pollution in signals is of great significance in the field of signal detection. In order to reduce the noise in the signal and improve the signal-to-noise ratio (SNR), this paper takes the singular value decomposition theory as the starting point, and constructs various singular value decomposition denoising models with multiple multi-division structures based on the two-division recursion singular value decomposition, and conducts a noise reduction analysis on two experimental signals containing noise of different power. Finally, the SNR and mean square error (MSE) are used as indicators to evaluate the noise reduction effect, it is verified that the two-division recursion singular value decomposition is the optimal noise reduction model. This noise reduction model is then applied to the diagnosis of faulty bearings. By this method, the fault signal is decomposed to reduce noise and the detail signal with maximum kurtosis is extracted for envelope spectrum analysis. Comparison of several traditional signal processing methods such as empirical modal decomposition (EMD), ensemble empirical mode decomposition (EEMD), variational mode decomposition (VMD), wavelet decomposition, etc. The results show that multi-resolution singular value decomposition (MRSVD) has better noise reduction effect and can effectively diagnose faulty bearings. This method is promising and has a good application prospect.