Search

Understanding the mechanisms governing the penetration of substances into the skin is crucial for the development of safe and effective topical drug delivery systems and skincare products. This study examined the partitioning of model permeants into human skin, by assessing six substances with diverse logP values. We employed stimulated Raman scattering (SRS) microscopy, an ambient, label-free optical imaging technique known for its ability to provide chemical distribution with subcellular resolution. Our investigation assessed partitioning into the two primary pathways through which substances traverse the skin: the intercellular lipid matrix and the intracellular route via corneocyte cells. We observed that the partitioning behaviour was strongly influenced by the lipophilicity of the molecule, with lipophilic compounds showing greater affinity for intercellular matrix with increased lipophilicity. Conversely, hydrophilic molecules demonstrated a preference for corneocyte cells, with their affinity increasing with increased hydrophilicity. The findings contribute to our understanding of the mechanisms underlying topical delivery and offer important implications and new methods beneficial for the development of safe and effective topical products. In addition, the methods presented could be valuable to reveal changes in drug partitioning or to assess targeting approaches in diseased skin models., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Author(s). Published by Elsevier B.V. All rights reserved.)

The formulation of paediatric medicines faces significant challenges to meet the requirements for safe and accurate administration, while maintaining a suitable taste. Multiparticulate formulations have a strong potential to address these challenges because they combine dose flexibility with ease of administration. Understanding the stability of multiparticulate formulations over storage as a function of time and environmental parameters, such as humidity and temperature, is important to manage their commercialisation and use. In this work, we have expanded the toolkit of available techniques for studying multiparticulates beyond those such as scanning electron microscopy (SEM) and confocal laser scanning microscopy. We include advanced methods of environmentally-controlled SEM to monitor temperature- and humidity-induced changes in-situ, and a variety of Raman spectroscopies including stimulated Raman scattering microscopy to identify and localise the different ingredients at the surface and inside the multiparticulates. These techniques allowed unprecedented monitoring of specific changes to the particulate structure and distribution of individual ingredients due to product aging. These methods should be considered as valuable novel tools for in-depth characterisation of multiparticulate formulations to further understand chemical changes occurring during their development, manufacturing and long-term storage. We envisage these techniques to be useful in furthering the development of future medicine formulations., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier Inc. All rights reserved.)

Tracking drug disposition in the skin in a non-destructive and at least semi-quantitative fashion is a relevant objective for the assessment of local (cutaneous) bioavailability. Confocal Raman spectroscopy has been shown potentially useful in this regard and, importantly, recent advances have enabled the presence of applied chemicals in the viable epidermis below the stratum corneum (SC) to be determined without ambiguity and having addressed the challenges of (a) background signals from endogenous species and noise and (b) signal attenuation due to absorption and scattering. This study aimed to confirm these observations using a different vibrational spectroscopy approach - specifically, stimulated Raman scattering (SRS) microscopy - and the more conventional in vitro skin penetration test (IVPT). SRS is a nonlinear optical imaging technique which enables more precise location of the skin surface and enhanced skin depth resolution relative to confocal Raman microscopy. The method can also probe larger areas of the sample under investigation and identify the localization of the permeating chemical in specific structural components of the skin. Here, SRS was shown capable of tracking the uptake and distribution of 4-cyanophenol (CP), the same model compound used in the recent confocal Raman investigation, at depths beyond the SC following skin treatment with different vehicles and for different times. The SRS results correlated well with those from the confocal Raman experiments, and both were consistent with independent IVPT measurements. Acquired images clearly delineated CP preference for the intercellular lipid layers of the SC relative to the corneocytes. The stage is now set to apply these and other correlative techniques to examine commercial drug products., Competing Interests: Declaration of competing interest None., (Copyright © 2024 The Author(s). Published by Elsevier B.V. All rights reserved.)

A correlative methodology for label-free chemical imaging of soft tissue has been developed, combining non-linear optical spectroscopies and mass spectrometry to achieve sub-micron spatial resolution and critically improved drug detection sensitivity. The approach was applied to visualise the kinetics of drug reservoir formation within human skin following in vitro topical treatment with a commercial diclofenac gel. Non-destructive optical spectroscopic techniques, namely stimulated Raman scattering, second harmonic generation and two photon fluorescence microscopies, were used to provide chemical and structural contrast. The same tissue sections were subsequently analysed by secondary ion mass spectrometry, which offered higher sensitivity for diclofenac detection throughout the epidermis and dermis. A method was developed to combine the optical and mass spectrometric datasets using image registration techniques. The label-free, high-resolution visualisation of tissue structure coupled with sensitive chemical detection offers a powerful method for drug biodistribution studies in the skin that impact directly on topical pharmaceutical product development., Competing Interests: Declaration of Competing Interest This work was funded by Haleon CH SARL. CR is currently a consultant for Haleon CH SARL but was employed at CRL at the time of this work., (Copyright © 2023 The Authors. Published by Elsevier B.V. All rights reserved.)

Confocal Raman spectroscopy is being assessed as a tool with which to quantify the rate and extent of drug uptake to and its clearance from target sites of action within the viable epidermis below the skin's stratum corneum (SC) barrier. The objective of this research was to confirm that Raman can interrogate drug disposition within the living layers of the skin (where many topical drugs elicit their pharmacological effects) and to identify procedures by which Raman signal attenuation with increasing skin depth may be corrected and normalized so that metrics descriptive of topical bioavailability may be identified. It was first shown in experiments on skin cross-sections parallel to the skin surface that the amide I signal, originating primarily from keratin, was quite constant with depth into the skin and could be used to correct for signal attenuation when confocal Raman data were acquired in a "top-down" fashion. Then, using 4-cyanophenol (CP) as a model skin penetrant with a strong Raman-active C≡N functionality, a series of uptake and clearance experiments, performed as a function of time, demonstrated clearly that normalized spectroscopic data were able to detect the penetrant to at least 40-80 μm into the skin and to distinguish the disposition of CP from different vehicles. Metrics related to local bioavailability (and potentially bioequivalence) included areas under the normalized C≡N signal versus depth profiles and elimination rate constants deduced post-removal of the formulations. Finally, Raman measurements were made with an approved dermatological drug, crisaborole, for which delivery from a fully saturated formulation into the skin layers just below the SC was detectable.

The mechanistic understanding of skin penetration underpins the design, efficacy and risk assessment of many high-value products including functional personal care products, topical and transdermal drugs. Stimulated Raman scattering (SRS) microscopy, a label free chemical imaging tool, combines molecular spectroscopy with submicron spatial information to map the distribution of chemicals as they penetrate the skin. However, the quantification of penetration is hampered by significant interference from Raman signals of skin constituents. This study reports a method for disentangling exogeneous contributions and measuring their permeation profile through human skin combining SRS measurements with chemometrics. We investigated the spectral decomposition capability of multivariate curve resolution - alternating least squares (MCR-ALS) using hyperspectral SRS images of skin dosed with 4-cyanophenol. By performing MCR-ALS on the fingerprint region spectral data, the distribution of 4-cyanophenol in skin was estimated in an attempt to quantify the amount permeated at different depths. The reconstructed distribution was compared with the experimental mapping of CN, a strong vibrational peak in 4-cyanophenol where the skin is spectroscopically silent. The similarity between MCR-ALS resolved and experimental distribution in skin dosed for 4 h was 0.79 which improved to 0.91 for skin dosed for 1 h. The correlation was observed to be lower for deeper layers of skin where SRS signal intensity is low which is an indication of low sensitivity of SRS. This work is the first demonstration, to the best of our knowledge, of combining SRS imaging technique with spectral unmixing methods for direct observation and mapping of the chemical penetration and distribution in biological tissues., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 The Author(s). Published by Elsevier B.V. All rights reserved.)

Evaluation of the bioavailability of drugs intended to act within the skin following the application of complex topical products requires the application of multiple experimental tools, which must be quantitative, validated, and, ideally and ultimately, sufficiently minimally invasive to permit use in vivo. The objective here is to show that both infrared (IR) and Raman spectroscopies can assess the uptake of a chemical into the stratum corneum (SC) that correlates directly with its quantification by the adhesive tape-stripping method. Experiments were performed ex vivo using excised porcine skin and measured chemical disposition in the SC as functions of application time and formulation composition. The quantity of chemicals in the SC removed on each tape-strip was determined from the individually measured IR and Raman signal intensities of a specific molecular vibration at a frequency where the skin is spectroscopically silent and by a subsequent conventional extraction and chromatographic analysis. Correlations between the spectroscopic results and the chemical quantification on the tape-strips were good, and the effects of longer application times and the use of different vehicles were clearly delineated by the different measurement techniques. Based on this initial investigation, it is now possible to explore the extent to which the spectroscopic approach (and Raman in particular) may be used to interrogate chemical disposition deeper in the skin and beyond the SC.

Stimulated Raman scattering (SRS) microscopy provides rapid label-free 3D chemical imaging with wide-ranging applications including histology, pharmacokinetic studies, and materials characterisation. SRS microscopy has seen a steady increase in utilisation since the early 2000s and has become more accessible due to the increase in availability of facilities, and the development of user-friendly instrumentation. Although some complete SRS systems are now commercially available, many instruments are home-built with highly varied laser sources, optics, and detection mechanisms. Signal intensity is also dependent on the effective spatiotemporal overlap of two (or more) laser beams, thus any drift in alignment can result in variable performance. Currently there is a lack of standard procedures or reference materials for SRS, which has important implications on reproducibility and consistency. These concerns are particularly relevant to the comparison of data from the same instrument at different times and instrument settings as well as between different instruments and laboratories. This tutorial-style review presents the most important practical considerations for sample preparation, instrument set-up, image acquisition and data analysis to obtain reproducible SRS measurements.

We report the results of a VAMAS (Versailles Project on Advanced Materials and Standards) inter-laboratory study on the measurement of the shell thickness and chemistry of nanoparticle coatings. Peptide-coated gold particles were supplied to laboratories in two forms: a colloidal suspension in pure water and; particles dried onto a silicon wafer. Participants prepared and analyzed these samples using either X-ray photoelectron spectroscopy (XPS) or low energy ion scattering (LEIS). Careful data analysis revealed some significant sources of discrepancy, particularly for XPS. Degradation during transportation, storage or sample preparation resulted in a variability in thickness of 53 %. The calculation method chosen by XPS participants contributed a variability of 67 %. However, variability of 12 % was achieved for the samples deposited using a single method and by choosing photoelectron peaks that were not adversely affected by instrumental transmission effects. The study identified a need for more consistency in instrumental transmission functions and relative sensitivity factors, since this contributed a variability of 33 %. The results from the LEIS participants were more consistent, with variability of less than 10 % in thickness and this is mostly due to a common method of data analysis. The calculation was performed using a model developed for uniform, flat films and some participants employed a correction factor to account for the sample geometry, which appears warranted based upon a simulation of LEIS data from one of the participants and comparison to the XPS results.

This study demonstrates the potential of polymeric nanoparticles as drug reservoirs for sustained topical drug delivery into microneedle-treated human nail. Laser scanning confocal microscopy was used to image the delivery of a fluorescent model compound from nanoparticles into the nail. A label-free imaging technique, stimulated Raman scattering microscopy, was applied, in conjunction with two-photon fluorescence imaging, to probe the disposition of nanoparticles and an associated lipophilic 'active' in a microneedle-porated nail. The results provide clear evidence that the nanoparticles function as immobile reservoirs, sequestered on the nail surface and in the microneedle-generated pores, from which the active payload can be released and diffuse laterally into the nail over an extended period of time., (Copyright © 2015 Elsevier B.V. All rights reserved.)

The effective treatment of diseases of the nail remains an important unmet medical need, primarily because of poor drug delivery. To address this challenge, the diffusion, in real time, of topically applied chemicals into the human nail has been visualized and characterized using stimulated Raman scattering (SRS) microscopy. Deuterated water (D2O), propylene glycol (PG-d8), and dimethyl sulphoxide (DMSO-d6) were separately applied to the dorsal surface of human nail samples. SRS microscopy was used to image D2O, PG-d8/DMSO-d6, and the nail through the O-D, -CD2, and -CH2 bond stretching Raman signals, respectively. Signal intensities obtained were measured as functions of time and of depth into the nail. It was observed that the diffusion of D2O was more than an order of magnitude faster than that of PG-d8 and DMSO-d6. Normalization of the Raman signals, to correct in part for scattering and absorption, permitted semiquantitative analysis of the permeation profiles and strongly suggested that solvent diffusion diverged from classical behavior and that derived diffusivities may be concentration dependent. It appeared that the uptake of solvent progressively undermined the integrity of the nail. This previously unreported application of SRS has permitted, therefore, direct visualization and semiquantitation of solvent penetration into the human nail. The kinetics of uptake of the three chemicals studied demonstrated that each altered its own diffusion in the nail in an apparently concentration-dependent fashion. The scale of the unexpected behavior observed may prove beneficial in the design and optimization of drug formulations to treat recalcitrant nail disease.

The precise use of nanoparticles in technological applications requires control over their surface properties. This implies the ability to quantitatively describe, for example, molecular coatings in terms of their thickness, areal mass, or number of molecules. Here, the authors describe two different approaches to the measurement of these parameters by using gold nanoparticles ranging in diameter from 10 to 80 nm and coated with three different proteins: immunoglobulin G, bovine serum albumin, and a peptide. One approach utilizes ultraviolet-visible spectroscopy, dynamic light scattering, and differential centrifugal sedimentation to measure the protein shell refractive indices and thicknesses, from which the number of molecules in the protein shell can be derived. The other approach employs x-ray photoelectron spectroscopy to measure the thickness of the dry molecular coatings and also to derive the number of molecules in the protein shell. The authors demonstrate that the two approaches, although very different, produce consistent measurement results. This finding is important to extend the quantitative analysis of nanoparticle molecular coatings to a wide range of materials.

Stimulated Raman scattering microscopy was used to assess the permeation of topically applied drugs and formulation excipients into porcine skin. This chemically selective technique generates high-resolution 3D images, from which semi-quantitative information may be elucidated. Ibuprofen, applied as a close-to-saturated solution in propylene glycol, was directly observed to crystallise in/on the skin, as the co-solvent permeated more rapidly, resulting in precipitation of the drug. Coherent Raman scattering microscopy is also an excellent tool, in conjunction with more conventional confocal fluorescence microscopy, with which to image micro/nanoparticle-based formulations. Specifically, the uptake of particles into thermal ablation transport pathways in the skin has been examined., (Copyright © 2013 Elsevier B.V. All rights reserved.)

Currently, the determination of health risks to pesticide applicators from dermal exposure to these chemicals is assessed using either a concentrate of the compound or a relevant aqueous dilution. Neither of these conditions reflects a normal exposure of an individual when re-entering an area after pesticide application, that is, contact with dried residue of the diluted product on foliage. Methodology has therefore been developed to determine a relevant estimate of this potential dermal re-entry exposure from pesticide residues. Potential delivery platforms have been characterized for the transfer of pesticide residue to skin. Spin coating has been used to deposit uniform pesticide layers on to each platform. Five pesticides have been chosen to encompass a wide range of physicochemical properties: atrazine, 2,4-dichlorophenoxyacetic acid (2,4-D), chlorpyrifos, monocrotophos, and acetochlor. In vitro (Franz diffusion cell) experiments have been performed to monitor the transfer of these pesticides from the delivery platforms onto and through excised porcine skin. Parallel experiments were also conducted with aqueous pesticide dilutions for comparison, and a final in vivo measurement using ibuprofen (as a model compound) complemented the in vitro data. The results demonstrate that transfer of chemical residue onto and subsequently through the skin is dependent on the physical attributes of the residue formed. Thus, assessing dermal exposure to pesticides based on skin contact with either the chemical concentrate or a relevant aqueous dilution may incorrectly estimate the risk for re-entry scenarios.

This tutorial review describes studies of hydrogen production and oxidation by biological catalysts--metalloenzymes known as hydrogenases--attached to electrodes. It explains how the electrocatalytic properties of hydrogenases are studied using specialised electrochemical techniques and how the data are interpreted to allow assessments of catalytic rates and performance under different conditions, including the presence of O2, CO and H2S. It concludes by drawing some comparisons between the enzyme active sites and platinum catalysts and describing some novel proof-of-concept applications that demonstrate the high activities and selectivities of these 'alternative' catalysts for promoting H2 as a fuel.

A new concept for enzyme-catalyzed redox transformations features pairs of electron donor and acceptor enzymes attached to conducting particles. Electrons furnished by oxidation at one enzyme are used at the other. Graphite microparticles modified with hydrogenase and nitrate reductase or fumarate reductase catalyze reductions of nitrate or fumarate by H2.

Rapid and reversible binding of sulfide to [NiFe]-hydrogenases (particularly the enzyme from Desulfovibrio vulgaris) under weakly acidic conditions (pH 6) has been studied by protein film voltammetry, which tracks the formation of different species as a function of potential. Sulfide (most likely entering as H2S) rapidly attacks the active site during H2 oxidation. The inactive adduct is formed (and is stable) only at potentials substantially more positive than the comparable species formed with oxygen species and is easily reactivated upon reduction. The sulfide adduct also reacts further with O2 to produce a new species that undergoes reductive activation very slowly. The results clarify complex and controversial chemistry reported in the literature and provide insight into how these enzymes would cope with sulfide production in sulfate-reducing bacteria.