157 results on '"Bazlov, A. I."'
Search Results
2. The effect of replacing molybdenum with vanadium on the tendency to amorphisation, structure and thermal properties of high-entropy alloys of the Fe–Co–Ni–Cr–(Mo,V)–B system
3. Development of Heat-Resistant Composites Based on Al-Mg-Si Alloy Mechanically Alloyed with Aluminide Particles
4. Effect of Thermomechanical Treatment on the Micro-hardness and Crystallization Behavior of an Amorphous Zr65.5Ni16Cu8.5Al10 Alloy
5. Formation, thermal stability and soft magnetic properties of Fe-Co-B-Si amorphous alloys with ultrahigh saturation magnetic induction of 2.0 T
6. Amorphous Alloys of the Fe–Co–Cr–B–Si System as a Base for Designing Nanostructured Hard Magnetic Materials
7. The influence of the Al2O3 particles on the microstructure of the mechanically alloyed Al-Mn-Cu alloy
8. Influence of Zr and Mn additions on microstructure and properties of Mg—2.5wt%Cu—Xwt%Zn (X = 2.5, 5 and 6.5) alloys
9. Fabrication of AA2024/SiCp Metal Matrix Composite by Mechanical Alloying
10. The Study of Structural Changes in Homogenized High-Entropy Alloys
11. The Microstructure and Properties of Al–Mn–Cu–Zr Alloy after High-Energy Ball Milling and Hot-Press Sintering
12. Effect of High-Temperature Rolling and Annealing on the Structure and Properties of a Zirconium Based Amorphous Alloy
13. Susceptibility of Mg–REM–Zn–Zr Magnesium Alloys to Casting Unsoundness
14. Character of the Distribution of Shear Bands According to the Volume of a Sample of Amorphous Alloy Based on Zr after Torsion under Pressure in a Bridgeman Chamber
15. Effect of the Cooling Rate on the Microstructure and Properties of C92900 Bronze
16. Evolution of Shear Bands in the Structure of a Zirconium-Based Amorphous Alloy during Rolling at Different Temperatures
17. High-Strength Titanium-Based Alloy for Low-Temperature Superplastic Forming
18. Electronic structure of the full-Heusler Co2-x1+xFe2-x1+xSi and half-Heusler CoFeSi alloys obtained by first-principles calculations and ultrasoft X-ray emission spectroscopy
19. A Study on the Influence of Zr on the Strengthening of the Al-10% Al2O3 Composite Obtained by Mechanical Alloying
20. Development of Heat-Resistant Composites Based on Al-Mg-Si Alloy Mechanically Alloyed with Aluminide Particles
21. Effect of Mechanical Alloying on the Dissolution of the Elemental Mn and Al-Mn Compound in Aluminum
22. Study of the Change in the Structure and Properties of High-Entropic Alloys during Thermal and Thermomechanical Processing
23. Aluminum Alloy Matrix Composite Reinforced with Metallic Glasses Particles Using Hot-Roll Bonding
24. Microstructural Characterization and Tensile Properties of Al-Mg-Fe-Ce Alloy at Room and Elevated Temperatures
25. Effect of Nb Addition on Microstructure and Thermal and Mechanical Properties of Fe-Co-Ni-Cu-Cr Multiprincipal-Element (High-Entropy) Alloys in As-Cast and Heat-Treated State
26. The Influence of Injection Temperature and Pressure on Pattern Wax Fluidity
27. Influence of Injection Temperature and Pressure on Pattern Wax Fluidity
28. Processing and Microstructural Characterization of Metallic Powders Produced from Chips of AA2024 Alloy
29. Effects of small additions of Zn on the microstructure, mechanical properties and corrosion resistance of WE43B Mg alloys
30. Investigation of the Structure and Properties of the Fe-Ni-Co-Cu-V Multiprincipal Element Alloys
31. Effect of Boron on the Microstructure, Superplastic Behavior, and Mechanical Properties of Ti-4Al-3Mo-1V Alloy
32. Boron Effect on Microstructure, Superplastic Behavior, and Mechanical Properties of Ti-4Al-3Mo-1V Alloy
33. A Study on the Influence of Zr on the Strengthening of the Al-10% Al 2 O 3 Composite Obtained by Mechanical Alloying.
34. Erratum to: Study of the Change in the Structure and Properties of High-Entropic Alloys during Thermal and Thermomechanical Processing
35. Effect of Melt Spinning and Nitriding on the Structure and Magnetic Hysteresis Properties of (Nd1 −xCex)Fe11Ti Alloys (0 ≤ x ≤ 0.3)
36. Influence of Annealing at Various Temperatures on the Structure and Hardness of Amorphous Ribbons of the Al85Y8Ni5Co2 Alloy
37. On Temperature Rise Within the Shear Bands in Bulk Metallic Glasses
38. Effect of Multiple Alloying Elements on the Glass-Forming Ability, Thermal Stability, and Crystallization Behavior of Zr-Based Alloys
39. Effect of Thermomechanical Treatment on the Micro-hardness and Crystallization Behavior of an Amorphous Zr65.5Ni16Cu8.5Al10 Alloy.
40. Enhanced Oxygen Evolution Reaction of Zr-Cu-Ni-Al Metallic Glass with an Oxide Layer in Alkaline Media
41. Studies of the structure and mechanical properties of Ti43.2Zr7.8Cu40.8Ni7.2Co1 alloy containing amorphous and crystalline phases
42. Electronic structure of the full-Heusler Co$$_{2-x}$$Fe$$_{1+x}$$Si and half-Heusler CoFeSi alloys obtained by first-principles calculations and ultrasoft X-ray emission spectroscopy
43. Investigation and simulation of crystallization of bulk zirconium-based metallic glasses
44. Simulation of Flow Stress of Single-Phase Aluminum Alloys of the Al – Mg, Al – Cu and Al – Zn Systems in the Process of Hot Deformation
45. Comparative analysis of the structure of palladium-based bulk metallic glasses prepared by treatment of melts with flux
46. Influence of Cold Rolling Process and Chemical Composition on the Mechanical Properties and Corrosion Behavior of Zr-Based Metallic Glasses
47. Structure and mechanical properties of Ni-Cu-Ti-Zr composite materials with amorphous phase
48. Development of mathematical models of superplasticity properties as a function of parameters of aluminum alloys of Al-Mg-Si system
49. Study of the structure and properties of a wrought Al–Mg–Mn aluminum alloy on a Gleeble 3800 simulator designed for physical modeling of thermomechanical processes
50. Thermophysical Properties of the Fe48Cr15Mo14C15B6Y2 Alloy in Liquid State
Catalog
Books, media, physical & digital resources
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.