Search

In the nitrogen-incorporated ultrananocrystalline diamond ((N)UNCD) films, representing an $n$-type highly conductive two-phase material comprised of $sp^3$ diamond grains and $sp^2$-rich graphitic grain boundaries, the current is carried by a high concentration of mobile electrons within the large-volume grain boundary networks. Fabricated in a simple thin-film planar form, (N)UNCD was found to be an efficient field emitter capable of emitting a significant amount of charge starting at the applied electric field as low as a few V/$\mu$m which makes it a promising material for designing electron sources. Despite the semimetallic conduction, field emission (FE) characteristics of this material demonstrate a strong deviation from the Fowler-Nordheim law in a high-current-density regime when (N)UNCD field emitters switch from a diode-like to resistor-like behavior. Such phenomenon resembles the current-density saturation effect in conventional semiconductors. In the present paper, we adapt the formalism developed for conventional semiconductors to study current-density saturation in (N)UNCD field emitters. We provide a comprehensive theoretical investigation of ($i$) the influence of partial penetration of the electric field into the material, ($ii$) transport effects (such as electric-field-dependent mobility), and ($iii$) features of a complex density-of-states structure (position and shape of $\pi-\pi^*$ bands, controlling the concentration of charge carriers) on the FE characteristics of (N)UNCD. We show that the formation of the current-density saturation plateau can be explained by the limited supply of electrons within the impurity $\pi-\pi^*$ bands and decreasing electron mobility in high electric field. Theoretical calculations are consistent with experiment., Comment: 15 pages, 14 figures

The present letter extends the prior findings on self-induced heating of solid state field emission devices. It was found that a vacuum diode (base pressure $\sim10^{-9}$ Torr), that makes use of graphite-rich polycrystalline diamond as cathode material, can switch from diode regime to resistor regime, to glow discharge plasma regime without any external perturbation, i.e. all transitions are self-induced. Combined results of in situ field emission microscopy and ex situ electron microscopy and Raman spectroscopy suggested that the nanodiamond cathode of the diode heated to about 3000 K which caused self-induced material evaporation, ionization and eventually micro-plasma formation. Our results confirm that field emission, commonly called cold emission, is a very complex phenomenon that can cause severe thermal load. Thermal load and material runaway could be the major factors causing vacuum diode deterioration, i.e. progressive increase in turn-on field, decrease in field enhancement factor, and eventual failure., Comment: 6 pages, 5 figures

In this paper we suggest an analytic model, and derive simple formulas, for the beam dynamics in a wakefield structure of arbitrary cross-section. The results could be applied to estimate an upper limit of the projected beam size in devices such as the dechirper and the wakefield streaking device. The suggested formalism is also applicable to the case when slices of the beam are distributed along an arbitrary line in 3D., Comment: 6 pages, 3 figures

The complete design, fabrication, and performance evaluation of a compact, single cell, $X$-band ($\sim$9 GHz) electron injector based on a field emission cathode (FEC) are presented. A pulsed electron beam is generated by a 10's of kW radiofrequency (RF) magnetron signal from a plug-in thin film nitrogen-incorporated ultrananocrystalline diamond (N)UNCD FEC cartridge. Testing of the $X$-band injector with the (N)UNCD FEC was conducted in a beamline equipped with a solenoid, Faraday cup and imaging screen. The results show that typically the (N)UNCD FEC cartridge produces $\gtrsim$1 mA/cm$^2$ at a surface electric field of 28 MV/m. The diameter of the output beam generated from the 4.4 mm diameter (N)UNCD cartridge can be as small as 1 mm. In terms of its practical applications, the demonstrated $X$-band electron injector with the (N)UNCD plug-in FEC can serve as a source for X-ray generation, materials processing, travelling-wave tubes (including GHz and THz backward wave oscillators), or can be used to drive slow-wave accelerating structures. The results presented also suggest that this field emitter technology based on planar (N)UNCD thin films, which are simply grown on the surface of optically polished stainless steel, can enable a vast number of device configurations that are efficient, flexible in design, and can be packaged with ease., Comment: 5 pages, 6 figures

It has been known for a long time that traditional semiconductor (e.g. intrinsic and doped Si and Ge or binary SiC and GaN) field emitters significantly deviate from Fowler-Nordheim (FN) law and saturate when a large current, on the order of microamperes or more, is attempted to be drawn from them. Many experiments established that the field emission current from carbonic materials, such as carbon nanotubes, amorphous carbon and polycrystalline diamond films, also deviate from FN law and saturate. These findings suggested that the saturation and departure from FN law is a broad and general phenomenon that applies to the class of nonmetallic field emitters. In this letter, we report a universal formula that describes the current saturation effect in nonmetallic field emitters. The formula accounts for material's bulk properties and field emitter geometry., Comment: 5 pages, 2 figures, 1 table

In this paper we study the effect of actual, locally resolved, field emission (FE) area on electron emission characteristics of uniform semimetallic nitrogen-incorporated ultrananocrystalline diamond ((N)UNCD) field emitters. To obtain the actual FE area, imaging experiments were carried out in a vacuum system in a parallel-plate configuration with a specialty anode phosphor screen. Electron emission micrographs were taken concurrently with $I$-$V$ characteristics measurements. It was found that in uniform (N)UNCD films the field emitting site distribution is not uniform across the surface, and that the actual FE area depends on the applied electric field. To quantify the actual FE area dependence on the applied electric field, a novel automated image processing algorithm was developed. The algorithm processes extensive imaging datasets and calculates emission area per image. By doing so, it was determined that the emitting area was always significantly smaller than the FE cathode surface area of 0.152 cm$^2$ available. Namely, the actual FE area would change from $5\times10^{-3}$ \% to 1.5 \% of the total cathode area with the applied electric field increased. Finally and most importantly, it was shown that when $I$-$E$ curves as measured in the experiment were normalized by the field-dependent emission area, the resulting $j$-$E$ curves demonstrated a strong kink and significant deviation from Fowler-Nordheim (FN) law, and eventually saturated at a current density of $\sim$100 mA/cm$^2$. This value was nearly identical for all studied (N)UNCD films, regardless of the substrate.

A new projection type imaging system is presented. The system can directly image the field emission site distribution on a cathode surface by making use of anode screens in the standard parallel plate configuration. The lateral spatial resolution of the imager is between 1 and 10 {\mu}m. The imaging sensitivity to the field emission current can be better than the current sensitivity of a typical electrometer, i.e. less than 1 nA.

The letter introduces a diagram that rationalizes tunneling atomic force microscopy (TUNA) observations of electron emission from polycrystalline diamonds as described in recent publications. The direct observations of electron emission from grain boundary sites by TUNA could indeed be evidence of electrons originating from grain boundaries under external electric fields. At the same time, from the diagram it follows that TUNA and field emission schemes are complimentary rather than equivalent for results interpretation. It is further proposed that TUNA could provide better insights into emission mechanisms by measuring the detailed structure of the potential barrier on the surface of polycrystalline diamonds., Comment: 3 figure, 3 pages