Search

Since enormous amounts of antibiotics are consumed daily by millions of patients all over the world, tons of pharmaceutical residuals reach aquatic bodies. Accordingly, our study adopted the Fenton catalytic degradation approach to conquer such detrimental pollutants. (Ce0.33Fe) MIL-88A was fabricated by the hydrothermal method; then, it was supported on the surface of g-C3N4 sheets using the post-synthetic approach to yield a heterogeneous Fenton-like (Ce0.33Fe) MIL-88A/10%g-C3N4 catalyst for degrading the tetracycline hydrochloride drug. The physicochemical characteristics of the catalyst were analyzed using FT-IR, SEM-EDX, XRD, BET, SEM, and XPS. The pH level, the H2O2 concentration, the reaction temperature, the catalyst dose, and the initial TC concentration were all examined as influencing factors of TC degradation efficiency. Approximately 92.44% of the TC was degraded within 100 min under optimal conditions: pH = 7, catalyst dosage = 0.01 g, H2O2 concentration = 100 mg/L, temperature = 25 °C, and TC concentration = 50 mg/L. It is noteworthy that the practical outcomes revealed how the Fenton-like process and adsorption work together. The degradation data were well-inspected by first-order and second-order models to define the reaction rate. The synergistic interaction between the (Ce0.33Fe) MIL-88A/10%g-C3N4 components produces a continuous redox cycle of two active metal species and the electron-rich source of g-C3N4. The quenching test demonstrates that •OH is the primary active species for degrading TC in the H2O2–(Ce0.33Fe) MIL-88A/10%g-C3N4 system. The GC-MS spectrum elucidates the yielded intermediates from degrading the TC molecules. [ABSTRACT FROM AUTHOR]

This study intended to fabricate a novel Fenton-like catalyst by supporting the rod-like MIL-88A and the magnetic tin ferrite nanoparticles (SnFe2O4) on the MXene sheets (MIL-88A/SnFe2O4@MXene). The well fabrication and determination of the MIL-88A/SnFe2O4@MXene properties were investigated using SEM, XPS, VSM, Zeta potential, XRD, and FTIR tools. The Fenton-like degradation reaction of CR by MIL-88A/SnFe2O4@MXene was thoroughly studied to identify the optimal proportions of the catalyst components, the impact of CR and H2O2 concentrations, as well as the effect of raising the temperature and the pH medium of the catalytic system and the catalyst dosage. Kinetics studies were executed to analyze the decomposition of CR and H2O2 using First-order and Second-order models. Furthermore, the degradation mechanism was proposed based on the scavenging test that proceeded in the presence of chloroform and t-butanol, in addition to the XPS analysis that clarified the participation of the containing metal species: Fe, Sn, and Ti, and the formation of a continual redox cycle. The obtained intermediates during the CR degradation were defined by GC–MS. A recyclability test was performed on MIL-88A/SnFe2O4@MXene during five runs of the Fenton-like degradation of CR molecules. Finally, the novel MIL-88A/SnFe2O4@MXene Fenton-like catalyst could be recommended as a propitious heterogeneous catalyst with a continuous redox cycle and a recyclability merit. [ABSTRACT FROM AUTHOR]

This study intended to fabricate a novel Fenton-like catalyst by supporting the rod-like MIL-88A and the magnetic tin ferrite nanoparticles (SnFe 2 O 4 ) on the MXene sheets (MIL-88A/SnFe 2 O 4 @MXene). The well fabrication and determination of the MIL-88A/SnFe 2 O 4 @MXene properties were investigated using SEM, XPS, VSM, Zeta potential, XRD, and FTIR tools. The Fenton-like degradation reaction of CR by MIL-88A/SnFe 2 O 4 @MXene was thoroughly studied to identify the optimal proportions of the catalyst components, the impact of CR and H 2 O 2 concentrations, as well as the effect of raising the temperature and the pH medium of the catalytic system and the catalyst dosage. Kinetics studies were executed to analyze the decomposition of CR and H 2 O 2 using First-order and Second-order models. Furthermore, the degradation mechanism was proposed based on the scavenging test that proceeded in the presence of chloroform and t-butanol, in addition to the XPS analysis that clarified the participation of the containing metal species: Fe, Sn, and Ti, and the formation of a continual redox cycle. The obtained intermediates during the CR degradation were defined by GC-MS. A recyclability test was performed on MIL-88A/SnFe 2 O 4 @MXene during five runs of the Fenton-like degradation of CR molecules. Finally, the novel MIL-88A/SnFe 2 O 4 @MXene Fenton-like catalyst could be recommended as a propitious heterogeneous catalyst with a continuous redox cycle and a recyclability merit.