Search

The issue of enhancing energy recovery efficiency is a key concern within the European Union's climate protection efforts. In particular, it applies to all processes and plants for the harvesting, gathering, and conversion of energy. The abandonment of fossil fuels in favour of alternative energy sources, and the increasing of energy efficiency and its recovery, is now a widely accepted direction of energy development. This study focuses on facilities that recover and process energy from municipal waste left after recycling processes, known as waste-to-energy (WtE) plants. These plants' energy recovery efficiency is governed by the R1 Formula in EU countries. This report is based on an analysis of four years of operational data from selected Polish municipal waste incinerators, supplemented by a discussion of various studies on energy recovery efficiency. The primary objective of this report is to evaluate the effectiveness of these plants in contributing to sustainable waste management and energy recovery. The main effect of the developed report is the set of results of the energy recovery efficiency factor values, determined based on the R1 formula valid in the EU legislation, tabulated and graphically illustrated, and calculated for five selected Polish waste-to-energy plants. The presented results, with their graphical interpretation, discussion, and conclusions, provide insights into several factors influencing the value of the R1 efficiency factor. They can be a valuable contribution to operators of waste-to-energy plants, especially those operating in countries outside the EU. [ABSTRACT FROM AUTHOR]

In this study, municipal solid waste incineration (MSWI) fly ash was subjected to mineral carbonation with the aim of investigating CO2 sequestration in waste material. The conducted study follows the trend of searching for alternatives to natural mineral materials with the ability to sequestrate CO2. The mineral carbonation of MSWI fly ash allowed for the storage of up to 0.25 mmol CO2 g−1. Next, both carbonated and uncarbonated MSWI fly ashes were activated using an alkaline activation method by means of two different activation agents, namely potassium hydroxide and potassium silicate or sodium hydroxide and sodium silicate. Mineral carbonation caused a drop in the compressive strength of alkali-activated materials, probably due to the formation of sodium and/or potassium carbonates. The maximum compressive strength obtained was 3.93 MPa after 28 days for uncarbonated fly ash activated using 8 mol dm−3 KOH and potassium hydroxide (ratio 3:1). The relative ratio of hydroxide:silicate also influenced the mechanical properties of the materials. Both carbonated and uncarbonated fly ashes, as well as their alkali-activated derivatives, were characterized in detail by means of XRD, XRF, and FTIR. Both uncarbonated and carbonated fly ashes were subjected to TG analysis. The obtained results have proved the importance of further research in terms of high-calcium fly ash (HCFA) utilization. [ABSTRACT FROM AUTHOR]

This paper presents the results of sorption tests against selected gaseous pollutants SO2, CO2 and H2O on geopolymer materials obtained from high-calcium fly ash from lignite power generation. In the synthesis process, activation of geopolymer materials was carried out using KOH and NaOH. It was found that the activating agent significantly affects the porous structure of the samples. The sorption experiments conducted for the KOH-activated sample showed high SO2 adsorption efficiency, almost ten times higher than against CO2. The results demonstrate the possibility of utilizing fly ash obtained from the lignite energy processing sector for the synthesis of geopolymers with potential application of the materials as functional plastering compounds. [ABSTRACT FROM AUTHOR]

A heat recovery system from flue gas increases the overall efficiency of a district heating or CHP plant, as the system recovers the waste energy contained in the flue gas at the chimney outlet. This makes it possible to increase thermal energy production with the same fuel consumption. A method for calculating the thermodynamic parameters of municipal waste incineration plants was developed as part of the work carried out. The mathematical models prepared made it possible to analyse the impact of the heat recovery system from flue gas on technical and economic parameters and the environment, including, among other things, an estimate of the annual amount of heat recovered, the amount of additional electricity consumed, the amount of condensate treated, the estimated capital expenditure, operating profits and operating costs. The results of the analyses were the basis for designing and constructing a heat recovery system from flue gas equipped with a condensation heat exchanger for the municipal waste incineration plant in Cracow. The calculation results were compared with the measurement results obtained during the test run of the constructed installation. • Technical description of the heat recovery system from flue gas. • A method for calculating the parameters of municipal waste incineration plants. • The impact of the heat recovery system on technical and economic parameters. • An analysis of the Thermal Waste Treatment Plant operation. • The calculation results were compared with experimental data. [ABSTRACT FROM AUTHOR]