Search

A robust method is described to synthesize degradable copolymers under aqueous miniemulsion conditions using α-lipoic acid as a cheap and scalable building block. Simple formulations of α-lipoic acid (up to 10 mol %), n -butyl acrylate, a surfactant, and a costabilizer generate stable micelles in water with particle sizes <200 nm. The ready availability of these starting materials facilitated performing polymerization reactions at large scales (4 L), yielding 600 g of poly( n -butyl acrylate- stat -α-lipoic acid) latexes that degrade under reducing conditions (250 kg mol -1 → 20 kg mol -1 ). Substitution of α-lipoic acid with ethyl lipoate further improves the solubility of dithiolane derivatives in n -butyl acrylate, resulting in copolymers that degrade to even lower molecular weights after polymerization and reduction. In summary, this convenient and scalable strategy provides access to large quantities of degradable copolymers and particles using cheap and commercially available starting materials.

ConspectusThe preparation of discrete and well-defined polymers is an emerging strategy for emulating the remarkable precision achieved by macromolecular synthesis in nature. Although modern controlled polymerization techniques have unlocked access to a cornucopia of materials spanning a broad range of monomers, molecular weights, and architectures, the word "controlled" is not to be confused with "perfect". Indeed, even the highest-fidelity polymerization techniques─yielding molar mass dispersities in the vicinity of Đ = 1.05─unavoidably create a considerable degree of structural and/or compositional dispersity due to the statistical nature of chain growth. Such dispersity impacts many of the properties that researchers seek to control in the design of soft materials.The development of strategies to minimize or entirely eliminate dispersity and access molecularly precise polymers therefore remains a key contemporary challenge. While significant advances have been made in the realm of iterative synthetic methods that construct oligomers with an exact molecular weight, head-to-tail connectivity, and even stereochemistry via small-molecule organic chemistry, as the word "iterative" suggests, these techniques involve manually propagating monomers one reaction at a time, often with intervening protection and deprotection steps. As a result, these strategies are time-consuming, difficult to scale, and remain limited to lower molecular weights. The focus of this Account is on an alternative strategy that is more accessible to the general scientific community because of its simplicity, versatility, and affordability: chromatography. Researchers unfamiliar with the intricacies of synthesis may recall being exposed to chromatography in an undergraduate chemistry lab. This operationally simple, yet remarkably powerful, technique is most commonly encountered in the purification of small molecules through their selective (differential) adsorption to a column packed with a low-cost stationary phase, usually silica. Because the requisite equipment is readily available and the actual separation takes little time (on the order of 1 h), chromatography is used extensively in small-molecule chemistry throughout industry and academia alike. It is, therefore, perhaps surprising that similar types of chromatography are not more widely leveraged in the field of polymer science as well.Here, we discuss recent advances in using chromatography to control the structure and properties of polymeric materials. Emphasis is placed on the utility of an adsorption-based mechanism that separates polymers based on polarity and composition at tractable (gram) scales for materials science, in contrast to size exclusion, which is extremely common but typically analyzes very small quantities of a sample (∼1 mg) and is limited to separating by molar mass. Key concepts that are highlighted include (1) the separation of low-molecular-weight homopolymers into discrete oligomers ( Đ = 1.0) with precise chain lengths and (2) the efficient fractionation of block copolymers into high-quality and widely varied libraries for accelerating materials discovery. In summary, the authors hope to convey the exciting possibilities in polymer science afforded by chromatography as a scalable, versatile, and even automated technique that unlocks new avenues of exploration into well-defined materials for a diverse assortment of researchers with different training and expertise.

After every school shooting in the United States both a wish and a fear arise: Will this be the one? Will this be the tipping point for change in a nation so deeply divided over the meaning of "the right to bear arms?" Sandy Hook, Connecticut? No. Parkland, Florida? No. So, why might the killing of 19 children and 2 teachers in Uvalde, Texas, prove different? The American epidemic of mass school shootings betrays a country's willingness to let its children disappear, to sacrifice them on the altar of an archetypally violent ethos. While the internal experiences of alienation, resentment and contempt are often at play in the individuals who carry out such violence, the author suggests that the uniquely American glorification of "the lone wolf", the "rugged individual" and the "misunderstood hero" fuels a supportive background for mass shooters in a nation that appears to be enamoured of ancient patriarchal attitudes as it doubles down on its valuing of weaponry. Such patriarchal attitudes, underscored by capitalism and the profits of the gun industry, are implicated in the territorial adhesion to American gun rights and in the high cost paid by the blood of innocents. Drawing on Vestergaard & Odde's (2021) concepts of socio-analysis and sociality, this paper explores the dynamic process of "mass-character" marked by "contagion, imitation, attraction and repulsion" that convolute cultural values of heritage and freedom into the perverse expression of mass violence., (© 2024 The Society of Analytical Psychology.)

Significance Statement: Autosomal dominant polycystic kidney disease (ADPKD) is a devastating disorder caused by mutations in polycystin 1 ( PKD1 ) and polycystin 2 ( PKD2 ). Currently, the mechanism for renal cyst formation remains unclear. Here, we provide convincing and conclusive data in mice demonstrating that Pkd2 deletion in embryonic Aqp2 + progenitor cells (AP), but not in neonate or adult Aqp2 + cells, is sufficient to cause severe polycystic kidney disease (PKD) with progressive loss of intercalated cells and complete elimination of α -intercalated cells, accurately recapitulating a newly identified cellular phenotype of patients with ADPKD. Hence, Pkd2 is a new potential regulator critical for balanced AP differentiation into, proliferation, and/or maintenance of various cell types, particularly α -intercalated cells. The Pkd2 conditional knockout mice developed in this study are valuable tools for further studies on collecting duct development and early steps in cyst formation. The finding that Pkd2 loss triggers the loss of intercalated cells is a suitable topic for further mechanistic studies., Background: Most cases of autosomal dominant polycystic kidney disease (ADPKD) are caused by mutations in PKD1 or PKD2. Currently, the mechanism for renal cyst formation remains unclear. Aqp2 + progenitor cells (AP) (re)generate ≥5 cell types, including principal cells and intercalated cells in the late distal convoluted tubules (DCT2), connecting tubules, and collecting ducts., Methods: Here, we tested whether Pkd2 deletion in AP and their derivatives at different developmental stages is sufficient to induce PKD. Aqp2Cre Pkd2f/f ( Pkd2AC ) mice were generated to disrupt Pkd2 in embryonic AP. Aqp2ECE/+Pkd2f/f ( Pkd2ECE ) mice were tamoxifen-inducted at P1 or P60 to inactivate Pkd2 in neonate or adult AP and their derivatives, respectively. All induced mice were sacrificed at P300. Immunofluorescence staining was performed to categorize and quantify cyst-lining cell types. Four other PKD mouse models and patients with ADPKD were similarly analyzed., Results: Pkd2 was highly expressed in all connecting tubules/collecting duct cell types and weakly in all other tubular segments. Pkd2AC mice had obvious cysts by P6 and developed severe PKD and died by P17. The kidneys had reduced intercalated cells and increased transitional cells. Transitional cells were negative for principal cell and intercalated cell markers examined. A complete loss of α -intercalated cells occurred by P12. Cysts extended from the distal renal segments to DCT1 and possibly to the loop of Henle, but not to the proximal tubules. The induced Pkd2ECE mice developed mild PKD. Cystic α -intercalated cells were found in the other PKD models. AQP2 + cells were found in cysts of only 13/27 ADPKD samples, which had the same cellular phenotype as Pkd2AC mice., Conclusions: Hence, Pkd2 deletion in embryonic AP, but unlikely in neonate or adult Aqp2 + cells (principal cells and AP), was sufficient to cause severe PKD with progressive elimination of α -intercalated cells, recapitulating a newly identified cellular phenotype of patients with ADPKD. We proposed that Pkd2 is critical for balanced AP differentiation into, proliferation, and/or maintenance of cystic intercalated cells, particularly α -intercalated cells., (Copyright © 2024 by the American Society of Nephrology.)

Shear-recoverable hydrogels based on block copolypeptides with rapid self-recovery hold potential in extrudable and injectable 3D-printing applications. In this work, a series of 3-arm star-shaped block copolypeptides composed of an inner hydrophilic poly(l-glutamate) domain and an outer β-sheet forming domain is synthesized with varying side chains and block lengths. By changing the β-sheet forming domains, hydrogels with diverse microstructures and mechanical properties are prepared and structure-function relationships are determined using scattering and rheological techniques. Differences in the properties of these materials are amplified during direct-ink writing with a strong correlation observed between printability and material chemistry. Significantly, it is observed that non-canonical β-sheet blocks based on phenyl glycine form more stable networks with superior mechanical properties and writability compared to widely used natural amino acid counterparts. The versatile design available through block copolypeptide materials provides a robust platform to access tunable material properties based solely on molecular design. These systems can be exploited in extrusion-based applications such as 3D-printing without the need for additives., (© 2023 Wiley-VCH GmbH.)

The synthetic utility of heterotelechelic polydimethylsiloxane (PDMS) derivatives is limited due to challenges in preparing materials with high chain-end fidelity. In this study, anionic ring-opening polymerization (AROP) of hexamethylcyclotrisiloxane (D 3 ) monomers using a specifically designed silyl hydride (Si-H)-based initiator provides a versatile approach toward a library of heterotelechelic PDMS polymers. A novel initiator, where the Si-H terminal group is connected to a C atom (H-Si-C) and not an O atom (H-Si-O) as in traditional systems, suppresses intermolecular transfer of the Si-H group, leading to heterotelechelic PDMS derivatives with a high degree of control over chain ends. In situ termination of the D 3 propagating chain end with commercially available chlorosilanes (alkyl chlorides, methacrylates, and norbornenes) yields an array of chain-end-functionalized PDMS derivatives. This diversity can be further increased by hydrosilylation with functionalized alkenes (alcohols, esters, and epoxides) to generate a library of heterotelechelic PDMS polymers. Due to the living nature of ring-opening polymerization and efficient initiation, narrow-dispersity ( Đ < 1.2) polymers spanning a wide range of molar masses (2-11 kg mol -1 ) were synthesized. With facile access to α-Si-H and ω-norbornene functionalized PDMS macromonomers (H-PDMS-Nb), the synthesis of well-defined supersoft ( G ' = 30 kPa) PDMS bottlebrush networks, which are difficult to prepare using established strategies, was demonstrated., Competing Interests: The authors declare no competing financial interest., (© 2023 The Authors. Published by American Chemical Society.)

Here, we present the synthesis and characterization of statistical and block copolymers containing α-lipoic acid (LA) using reversible addition-fragmentation chain-transfer (RAFT) polymerization. LA, a readily available nutritional supplement, undergoes efficient radical ring-opening copolymerization with vinyl monomers in a controlled manner with predictable molecular weights and low molar-mass dispersities. Because lipoic acid diads present in the resulting copolymers include disulfide bonds, these materials efficiently and rapidly degrade when exposed to mild reducing agents such as tris(2-carboxyethyl)phosphine ( M n = 56 → 3.6 kg mol -1 ). This scalable and versatile polymerization method affords a facile way to synthesize degradable polymers with controlled architectures, molecular weights, and molar-mass dispersities from α-lipoic acid, a commercially available and renewable monomer.

Chronic pain, which can potentially develop from acute pain, subacute pain, or breakthrough pain, is generally defined as pain persisting for greater than three months with minimal relief. Chronic pain can be associated with a myriad of medical conditions. It is also one of the most common causes of disability, physical suffering, depression, and reduced quality of life. Treatment can vary depending on the underlying pathophysiology and can involve physical therapy, non-pharmaceutical approaches, pharmaceutical drugs, and invasive procedures. Currently available pharmaceutical agents have been effective for short-term management of chronic pain conditions, but few options address chronic pain with long-term efficacy. First-line pharmaceutical agents can potentially include over-the-counter (OTC) or prescription-strength non-steroidal anti-inflammatory drugs (NSAIDs), which have been linked to numerous side effects. If chronic pain persists, steroids are frequently used to provide longer relief. For more progressive or resistant chronic pain and/or in conjunction with invasive procedures, opioids have been utilized for acute treatment and for long-term maintenance. While these agents have proven to be effective for both acute and long-term use due to their modulation at various peripheral and central opioid receptors, they can be associated with numerous side effects and tied to the risk of addiction. As such, an unmet need exists to identify treatment modalities that provide opioid-like pain relief without opioid-induced adverse effects and the potential for addiction. This narrative review will provide an overview of the currently available treatment modalities for chronic pain and their adverse event profiles, as well as a review of therapies that are currently in development and/or preclinical trials for the management and treatment of chronic pain., Competing Interests: The authors have declared that no competing interests exist., (Copyright © 2023, Patel et al.)

The promise of ABC triblock terpolymers for improving the mechanical properties of thermoplastic elastomers is demonstrated by comparison with symmetric ABA/CBC analogs having similar molecular weights and volume fraction of B and A/C domains. The ABC architecture enhances elasticity (up to 98% recovery over 10 cycles) in part through essentially full chain bridging between discrete hard domains leading to the minimization of mechanically unproductive loops. In addition, the unique phase space of ABC triblocks also enables the fraction of hard-block domains to be higher ( f hard ≈ 0.4) while maintaining elasticity, which is traditionally only possible with non-linear architectures or highly asymmetric ABA triblock copolymers. These advantages of ABC triblock terpolymers provide a tunable platform to create materials with practical applications while improving our fundamental understanding of chain conformation and structure-property relationships in block copolymers., Competing Interests: The authors declare no competing financial interest., (© 2023 The Authors. Published by American Chemical Society.)

Pressure-sensitive adhesives (PSAs) based on poly(acrylate) chemistry are common in a wide variety of applications, but the absence of backbone degradability causes issues with recycling and sustainability. Here, we report a strategy to create degradable poly(acrylate) PSAs using simple, scalable, and functional 1,2-dithiolanes as drop-in replacements for traditional acrylate comonomers. Our key building block is α-lipoic acid, a natural, biocompatible, and commercially available antioxidant found in various consumer supplements. α-Lipoic acid and its derivative ethyl lipoate efficiently copolymerize with n -butyl acrylate under conventional free-radical conditions leading to high-molecular-weight copolymers ( M n > 100 kg mol -1 ) containing a tunable concentration of degradable disulfide bonds along the backbone. The thermal and viscoelastic properties of these materials are practically indistinguishable from nondegradable poly(acrylate) analogues, but a significant reduction in molecular weight is realized upon exposure to reducing agents such as tris (2-carboxyethyl) phosphine (e.g., M n = 198 kg mol -1 → 2.6 kg mol -1 ). By virtue of the thiol chain ends produced after disulfide cleavage, degraded oligomers can be further cycled between high and low molecular weights through oxidative repolymerization and reductive degradation. Transforming otherwise persistent poly(acrylates) into recyclable materials using simple and versatile chemistry could play a pivotal role in improving the sustainability of contemporary adhesives.

Triboelectric nanogenerators (TENGs) have received significant attention for next-generation wearable electronics due to their simple device structure and low cost. Although the performance of TENGs is intimately tied to compressibility effects in the charge-generating layer, achieving high compressibility with conventional elastomers is challenging because molecular entanglements place a lower bound on the softness of cross-linked networks. Here, we demonstrate that bottlebrush elastomers are efficient charge-generating layers that improve the output performance of TENGs, including voltage, current, and surface potential, by minimizing entanglements and decreasing the compressive modulus ( E ). For example, a cross-linked bottlebrush with poly(dimethylsiloxane) side chains yielded TENGs with an output voltage (120 V) more than two times larger than a linear PDMS network (55 V). In conclusion, this study highlights the advantage of designing new charge-generating layers with improved compressibility to enhance TENG performance.

Poly(acrylamide- co -acrylic acid) (P(AAm- co -AA)) hydrogels are highly tunable and pH-responsive materials frequently used in biomedical applications. The swelling behavior and mechanical properties of these gels have been extensively characterized and are thought to be controlled by the protonation state of the acrylic acid (AA) through the regulation of solution pH. However, their tribological properties have been underexplored. Here, we hypothesized that electrostatics and the protonation state of AA would drive the tribological properties of these polyelectrolyte gels. P(AAm- co -AA) hydrogels were prepared with constant acrylamide (AAm) concentration (33 wt%) and varying AA concentration to control the amount of ionizable groups in the gel. The monomer:crosslinker molar ratio (200:1) was kept constant. Hydrogel swelling, stiffness, and friction behavior were studied by systematically varying the acrylic acid (AA) concentration from 0-12 wt% and controlling solution pH (0.35, 7, 13.8) and ionic strength ( I = 0 or 0.25 M). The stiffness and friction coefficient of bulk hydrogels were evaluated using a microtribometer and borosilicate glass probes as countersurfaces. The swelling behavior and elastic modulus of these polyelectrolyte hydrogels were highly sensitive to solution pH and poorly predicted the friction coefficient ( µ ), which decreased with increasing AA concentration. P(AAm- co -AA) hydrogels with the greatest AA concentrations (12 wt%) exhibited superlubricity ( µ = 0.005 ± 0.001) when swollen in unbuffered, deionized water (pH = 7, I = 0 M) and 0.5 M NaOH (pH = 13.8, I = 0.25 M) ( µ = 0.005 ± 0.002). Friction coefficients generally decreased with increasing AA and increasing solution pH. We postulate that tunable lubricity in P(AAm- co -AA) gels arises from changes in the protonation state of acrylic acid and electrostatic interactions between the probe and hydrogel surface., Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest. The handling editor MB declared a shared affiliation with the authors at the time of review., (Copyright © 2022 Chau, Getty, Rhode, Bates, Hawker and Pitenis.)

Urothelium is a specialized multilayer epithelium that lines the urinary tract from the proximal urethra to the kidney. In addition to proliferation and differentiation during development, urothelial injury postnatally triggers a robust regenerative capacity to restore the protective barrier between the urine and tissue. Mounting evidence supports the existence of dedicated progenitor cell populations that give rise to urothelium during development and in response to injury. Understanding the cellular and molecular basis for urothelial patterning and repair will inform tissue regeneration therapies designed to ameliorate a number of structural and functional defects of the urinary tract. Here, we review the current understanding of urothelial progenitors and the signaling pathways that govern urothelial development and repair. While most published studies have focused on bladder urothelium, we also discuss literature on upper tract urothelial progenitors. Furthermore, we discuss evidence supporting existence of context-specific progenitors. This knowledge is fundamental to the development of strategies to regenerate or engineer damaged or diseased urothelium., (© 2021. IPNA.)

Mice with inducible urothelial deletion of fibroblast growth factor receptor 2 (ShhCreERT2;Fgfr2 Fl/Fl ) injured with cyclophosphamide had aberrant basal cell endoreplication and poor regeneration. The endoreplication correlated with an absence of phosphorylated (activated) ERK expression in urothelium. We assessed whether inhibiting ERK activity phenocopied the urothelial defects in injured Fgfr2 mutant mice. We co-administered cyclophosphamide and an ERK inhibitor (ERKi) systemically in mice and assessed general histology and immunofluorescence for various markers post injury. Since AKT also signals downstream of FGFR2, we assessed effects of an AKT inhibitor (AKTi) on cyclophosphamide injury. ERK knockdown did not affect urothelial injury or proliferation 24 h after cyclophosphamide. Conversely, ERK inhibition led to larger basal cell nuclei, more submucosal hemorrhage and attenuated uroplakin staining 3 days after injury versus vehicle-treated mice. Compared to vehicle-treated mice, ERKi-treated mice had a trend for more Ki67 + urothelial cells and had statistically fewer phospho-Histone H3 + cells normalized to Ki67 and higher basal cell DNA content, consistent with endoreplication 3 days after injury. Ten days after injury, ERKi-treated mice still had signs of poor urothelial regeneration with absent or aberrant expression of differentiation markers and ectopic lumenal expression of keratin 14 (basal progenitor marker). Co-administration of the AKTi led to no apparent urothelial defects 3 days after cyclophosphamide. Thus, ERK knockdown (but not AKT knockdown) leads to urothelial regenerative responses after cyclophosphamide reminiscent of Fgfr2 mutant mice. Together, it appears that FGFR2 acts through ERK to prevent aberrant urothelial basal cell endoreplication and ensure normal regeneration after cyclophosphamide., (© 2022 The Authors. Physiological Reports published by Wiley Periodicals LLC on behalf of The Physiological Society and the American Physiological Society.)

We previously identified a peptide derived from human fibroblast growth factor 7 (FGF7p) that blocks urothelial apoptosis similar to full-length FGF7, although effects of FGF7p on urothelial repair are unknown. Also, while urothelial AKT activation downstream of FGF7p correlated with the anti-apoptotic effects, we have not directly interrogated the role of AKT in mediating the cytoprotection. Our goal was to assess effects of FGF7p on urothelial repair and the role of AKT signaling in mediating the cytoprotective effects of FGF7p. We performed hematoxylin and eosin (H&E), TUNEL, and/or immunofluorescence (IF) staining for various markers in FGF7p-treated mice 28 days after giving cyclophosphamide or after co-administering a systemic AKT antagonist with FGF7p 24 h after cyclophosphamide. Vehicle-treated and injured mice had hyperplastic urothelium, incomplete return of mature superficial cell markers, ongoing proliferation, and continued presence of basal progenitor markers 28 days after injury; conversely, FGF7p-treated mice had normal numbers of urothelial cell layers, nearly complete return of superficial cell markers, limited proliferation and fewer basal progenitor cells 28 days post-injury. Vehicle-treated mice also had ectopic lumenal basal progenitor cell markers, while FGF7p had none 28 days after cyclophosphamide. Co-administration of an AKT inhibitor largely abrogated FGF7p-driven AKT activation and cytoprotection in urothelium 24 h after injury. Thus, FGF7p drives faster and higher fidelity urothelial repair by limiting apoptotic injury via AKT signaling, similar to full-length FGF7. Finally, FGF7p is much less expensive to synthesize and has a longer shelf life and higher purity than FGF7., (© 2022 The Authors. Physiological Reports published by Wiley Periodicals LLC on behalf of The Physiological Society and the American Physiological Society.)

Keratinocyte growth factor (KGF) drives phosphorylated (activated) AKT (pAKT) in bladder urothelium, which correlates with cytoprotection from cyclophosphamide. The current study determined whether: i) KGF modifies AKT targets [B-cell lymphoma protein 2-associated agonist of cell death (BAD) and mammalian target of rapamycin complex (mTORC)-1] that could block apoptosis; ii) AKT signaling is required for KGF cytoprotection; iii) direct AKT activation drives cytoprotection; iv) co-administration of KGF and an AKT inhibitor blocks urothelial cytoprotection and AKT and AKT-target activation; and v) an AKT agonist prevents cyclophosphamide-induced urothelial apoptosis. Mice were given KGF and cyclophosphamide (or sham injury), and pBAD (readout of BAD inhibition) or p-p70S6k (pS6, readout of mTORC1 signaling) was assessed. KGF induced pBAD urothelial staining and prevented cyclophosphamide-induced loss of urothelial pS6 staining (likely stabilizing mTORC1 activity). Co-administration of KGF and AKT inhibitor blocked KGF-driven urothelial cytoprotection from cyclophosphamide and prevented pAKT, pBAD, and pS6 urothelial expression. Conversely, systemic AKT agonist blocked cyclophosphamide-induced urothelial apoptosis and induced pAKT, pBAD, and pS6, similar to KGF. Thus, the KGF-AKT signaling axis appeared to phosphorylate (suppress) BAD and prevent cyclophosphamide-induced loss of mTORC1 signaling, both of which likely suppress apoptosis. Additionally, AKT signaling was required for KGF-driven cytoprotection, and direct AKT activation was sufficient for blocking apoptosis. Thus, AKT may be a therapeutic target for blocking urothelial apoptosis from cyclophosphamide., (Copyright © 2022 American Society for Investigative Pathology. Published by Elsevier Inc. All rights reserved.)

Although full-length fibroblast growth factor 7 (FGF7) blocks cyclophosphamide-induced urothelial apoptosis in mice, limitations include high production costs because of its large size. We previously identified a small peptide derived from FGF2 that mitigated acute radiation syndrome as well as full-length FGF2. Based on the sequence of the FGF2 peptide, we synthesized a corresponding 19 amino acid FGF7 peptide (FGF7p). Our objectives were to determine if systemic FGF7p triggered the downstream targets and protected against cyclophosphamide bladder injury similar to full-length FGF7. We administered FGF7p or vehicle subcutaneously (SQ) to mice subjected to no injury or intraperitoneal (IP) cyclophosphamide and harvested bladders 1 day after injury. We then performed hematoxylin and eosin, TUNEL and immunofluorescence (IF) staining. In uninjured mice, a 20 mg/kg threshold FGF7p dose induced expression of phosphorylated (activated) FRS2α (pFRS2α), and pAKT in urothelium (consistent with cytoprotective effects of FGF7). We then gave FGF7p (20 mg/kg) or vehicle at 72 and 48 h prior to cyclophosphamide. One day after injury, TUNEL staining revealed many more apoptotic urothelial cells with vehicle treatment versus FGF7p treatment. IF for pAKT and readouts of two anti-apoptotic AKT targets (BAD and mTORC1) revealed minimal staining with vehicle treatment, but strong urothelial expression for all markers with FGF7p treatment. In conclusion, FGF7p appears to block bladder urothelial apoptosis via AKT and its targets, similar to FGF7. FGF7p is much more inexpensive to make and has a longer shelf life and higher purity than FGF7., (© 2022 The Authors. Physiological Reports published by Wiley Periodicals LLC on behalf of The Physiological Society and the American Physiological Society.)

Breast implant anaplastic large cell lymphoma (ALCL) is a T-cell neoplasm arising around textured breast implants that was recognized recently as a distinct entity by the World Health Organization. Rarely, other types of lymphoma have been reported in patients with breast implants, raising the possibility of a pathogenetic relationship between breast implants and other types of lymphoma. We report eight cases of Epstein-Barr virus (EBV)-positive large B-cell lymphoma associated with breast implants. One of these cases was invasive, and the other seven neoplasms were noninvasive and showed morphologic overlap with breast implant ALCL. All eight cases expressed B-cell markers, had a non-germinal center B-cell immunophenotype, and were EBV+ with a latency type III pattern of infection. We compared the noninvasive EBV+ large B-cell lymphoma cases with a cohort of breast implant ALCL cases matched for clinical and pathologic stage. The EBV+ large B-cell lymphoma cases more frequently showed a thicker capsule, and more often were associated with calcification and prominent lymphoid aggregates outside of the capsule. The EBV+ B-cell lymphoma cells were more often arranged within necrotic fibrinoid material in a layered pattern. We believe that this case series highlights many morphologic similarities between EBV+ large B-cell lymphoma and breast implant ALCL. The data presented suggest a pathogenetic role for breast implants (as well as EBV) in the pathogenesis of EBV+ large B-cell lymphoma. We also provide some histologic findings useful for distinguishing EBV+ large B-cell lymphoma from breast implant ALCL in this clinical setting., (© 2021. The Author(s), under exclusive licence to United States & Canadian Academy of Pathology.)

Wearable electronics and biointerfacing technology require materials that are both compliant and conductive. The typical design strategy exploits polymer composites containing conductive particles, but the addition of a hard filler generally leads to a substantial increase in modulus that is not well-matched to biological tissue. Here, we report a new class of supersoft, conductive composites comprising carbon nanotubes (CNT) embedded in bottlebrush polymer networks. By virtue of the bottlebrush polymer architecture, these materials are several orders of magnitude softer than comparable composites in the literature involving linear polymer networks. For example, a CNT content of 0.25 wt % yields a shear modulus of 66 kPa while maintaining a typical conductivity for a CNT composite (ca. 10 -2 S/m). An added benefit of this bottlebrush matrix chemistry is the presence of dynamic polyester bonds that facilitate thermal (re)processing. This unique strategy of designing soft composites provides new opportunities to tailor the structure and properties of sustainable advanced materials., Competing Interests: The authors declare the following competing financial interest(s): A provisional patent has been filed covering the results reported herein. The authors declare no other competing financial interests., (© 2021 The Authors. Published by American Chemical Society.)

Direct lithium extraction via membrane separations has been fundamentally limited by lack of monovalent ion selectivity exhibited by conventional polymeric membranes, particularly between sodium and lithium ions. Recently, a 12-Crown-4-functionalized polynorbornene membrane was shown to have the largest lithium/sodium permeability selectivity observed in a fully aqueous system to date. Using atomistic molecular dynamics simulations, we reveal that this selectivity is due to strong interactions between sodium ions and 12-Crown-4 moieties, which reduce sodium ion diffusivity while leaving lithium ion mobility relatively unaffected. Moreover, the ion diffusivities in the membrane, when scaled by their respective solution diffusivities and free ion fractions, can be collapsed to an almost universal relationship depending on solvent volume fraction.

Lithium is widely used in contemporary energy applications, but its isolation from natural reserves is plagued by time-consuming and costly processes. While polymer membranes could, in principle, circumvent these challenges by efficiently extracting lithium from aqueous solutions, they usually exhibit poor ion-specific selectivity. Toward this end, we have incorporated host-guest interactions into a tunable polynorbornene network by copolymerizing 1) 12-crown-4 ligands to impart ion selectivity, 2) poly(ethylene oxide) side chains to control water content, and 3) a crosslinker to form robust solids at room temperature. Single salt transport measurements indicate these materials exhibit unprecedented reverse permeability selectivity (∼2.3) for LiCl over NaCl-the highest documented to date for a dense, water-swollen polymer. As demonstrated by molecular dynamics simulations, this behavior originates from the ability of 12-crown-4 to bind Na + ions more strongly than Li + in an aqueous environment, which reduces Na + mobility (relative to Li + ) and offsets the increase in Na + solubility due to binding with crown ethers. Under mixed salt conditions, 12-crown-4 functionalized membranes showed identical solubility selectivity relative to single salt conditions; however, the permeability and diffusivity selectivity of LiCl over NaCl decreased, presumably due to flux coupling. These results reveal insights for designing advanced membranes with solute-specific selectivity by utilizing host-guest interactions., Competing Interests: The authors declare no competing interest.

The hexagonally close-packed (HCP) sphere phase is predicted to be stable across a narrow region of linear block copolymer phase space, but the small free energy difference separating it from face-centered cubic spheres usually results in phase coexistence. Here, we report the discovery of pure HCP spheres in linear block copolymer melts with A = poly(2,2,2-trifluoroethyl acrylate) ("F") and B = poly(2-dodecyl acrylate) ("2D") or poly(4-dodecyl acrylate) ("4D"). In 4DF diblocks and F4DF triblocks, the HCP phase emerges across a substantial range of A-block volume fractions (circa f A = 0.25-0.30), and in F4DF, it forms reversibly when subjected to various processing conditions which suggests an equilibrium state. The time scale associated with forming pure HCP upon quenching from a disordered liquid is intermediate to the ordering kinetics of the Frank-Kasper σ and A15 phases. However, unlike σ and A15, HCP nucleates directly from a supercooled liquid or soft solid without proceeding through an intermediate quasicrystal. Self-consistent field theory calculations indicate the stability of HCP is intimately tied to small amounts of molar mass dispersity ( Đ ); for example, an HCP-forming F4DF sample with f A = 0.27 has an experimentally measured Đ = 1.04. These insights challenge the conventional wisdom that pure HCP is difficult to access in linear block copolymer melts without the use of blending or other complex processing techniques.

As the scope of additive manufacturing broadens, interest has developed in 3D-printed objects that are derived from recyclable resins with chemical and mechanical tunability. Dynamic covalent bonds have the potential to not only increase the sustainability of 3D-printed objects, but also serve as reactive sites for postprinting derivatization. In this study, we use boronate esters as a key building block for the development of catalyst-free, 3D-printing resins with the ability to undergo room-temperature exchange at the cross-linking sites. The orthogonality of boronate esters is exploited in fast-curing, oxygen-tolerant thiol-ene resins in which the dynamic character of 3D-printed objects can be modulated by the addition of a static, covalent cross-linker with no room-temperature bond exchange. This allows the mechanical properties of printed parts to be varied between those of a traditional thermoset and a vitrimer. Objects printed with a hybrid dynamic/static resin exhibit a balance of structural stability (residual stress = 18%) and rapid exchange (characteristic relaxation time = 7 s), allowing for interfacial welding and postprinting functionalization. Modulation of the cross-linking density postprinting is enabled by selective hydrolysis of the boronate esters to generate networks with swelling capacities tunable from 1.3 to 3.3.

We introduce a novel grafting-through polymerization strategy to synthesize dynamic bottlebrush polymers and elastomers in one step using light to construct a disulfide-containing backbone. The key starting material-α-lipoic acid (LA)-is commercially available, inexpensive, and biocompatible. When installed on the chain end(s) of poly(dimethylsiloxane) (PDMS), the cyclic disulfide unit derived from LA polymerizes under ultraviolet (UV) light in ambient conditions. Significantly, no additives such as initiator, solvent, or catalyst are required for efficient gelation. Formulations that include bis-LA-functionalized cross-linker yield bottlebrush elastomers with high gel fractions (83-98%) and tunable, supersoft shear moduli in the ∼20-200 kPa range. An added advantage of these materials is the dynamic disulfide bonds along each bottlebrush backbone, which allow for light-mediated self-healing and on-demand chemical degradation. These results highlight the potential of simple and scalable synthetic routes to generate unique bottlebrush polymers and elastomers based on PDMS.

Recent models have predicted entangled polymer solutions could shear band due to unstable flow-induced demixing. This work provides the first experimental probe of the in situ concentration profile of entangled polymer solutions under shear. At shear rates above a critical value, we show that the concentration and velocity profiles can develop bands, in quantitative agreement with steady-state model predictions. These findings highlight the critical importance of flow-concentration coupling in entangled polymer solutions.

Cyclophosphamide may cause hemorrhagic cystitis and eventually bladder urothelial cancer. Genetic determinants for poor outcomes are unknown. We assessed actions of fibroblast growth factor receptor (FGFR) 2 in urothelium after cyclophosphamide exposure. Conditional urothelial deletion of Fgfr2 (Fgfr2KO) did not affect injury severity or proliferation of keratin 14 + (KRT14 + ) basal progenitors or other urothelial cells 1 day after cyclophosphamide exposure. Three days after cyclophosphamide exposure, Fgfr2KO urothelium had defective regeneration, fewer cells, larger basal cell bodies and nuclei, paradoxical increases in proliferation markers, and excessive replication stress versus controls. Fgfr2KO mice had evidence of pathologic basal cell endoreplication associated with absent phosphorylated ERK staining and decreased p53 expression versus controls. Mice with conditional deletion of Fgfr2 in urothelium enriched for KRT14 + cells reproduced Fgfr2KO abnormalities after cyclophosphamide exposure. Fgfr2KO urothelium had defects up to 6 months after injury versus controls, including larger basal cells and nuclei, more persistent basal and ectopic lumenal KRT14 + cells, and signs of metaplasia (attenuated E-cadherin staining). Mice missing one allele of Fgfr2 also had (less severe) regeneration defects and basal cell endoreplication 3 days after cyclophosphamide exposure versus controls. Thus, reduced FGFR2/ERK signaling apparently leads to abnormal urothelial repair after cyclophosphamide exposure from pathologic basal cell endoreplication. Patients with genetic variants in FGFR2 or its ligands may have increased risks of hemorrhagic cystitis or urothelial cancer from persistent and ectopic KRT14 + cells., (Copyright © 2020 American Society for Investigative Pathology. Published by Elsevier Inc. All rights reserved.)

Self-healing polymer electrolytes are reported with light-switchable conductivity based on dynamic N -donor ligand-containing diarylethene (DAE) and multivalent Ni 2+ metal-ion coordination. Specifically, a polystyrene polymer grafted with poly(ethylene glycol- r -DAE)acrylate copolymer side chains was effectively cross-linked with nickel(II) bis(trifluoromethanesulfonimide) (Ni(TFSI) 2 ) salts to form a dynamic network capable of self-healing with fast exchange kinetics under mild conditions. Furthermore, as a photoswitching compound, the DAE undergoes a reversible structural and electronic rearrangement that changes the binding strength of the DAE-Ni 2+ complex under irradiation. This can be observed in the DAE-containing polymer electrolyte where irradiation with UV light triggers an increase in the resistance of solid films, which can be recovered with subsequent visible light irradiation. The increase in resistance under UV light irradiation indicates a decrease in ion mobility after photoswitching, which is consistent with the stronger binding strength of ring-closed DAE isomers with Ni 2+ . 1 H- 15 N heteronuclear multiple-bond correlation nuclear magnetic resonance (HMBC NMR) spectroscopy, continuous wave electron paramagnetic resonance (cw EPR) spectroscopy, and density functional theory (DFT) calculations confirm the increase in binding strength between ring-closed DAE with metals. Rheological and in situ ion conductivity measurements show that these polymer electrolytes efficiently heal to recover their mechanical properties and ion conductivity after damage, illustrating potential applications in smart electronics.

Molecular architecture plays a key role in the self-assembly of block copolymers, but few studies have systematically examined the influence of chain connectivity on tetrahedrally close-packed (TCP) sphere phases. Here, we report a versatile material platform comprising two blocks with substantial conformational asymmetry, A = poly(trifluoroethyl acrylate) and B = poly(dodecyl acrylate), and use it to compare the phase behavior of AB diblocks, ABA triblocks, and (AB) n radial star copolymers with n = 3 or 4. Each architecture forms TCP sphere phases at minority A block compositions ( f A < 0.5), namely, σ and A15, but with differences in the location of order-order phase boundaries that are not anticipated by mean-field self-consistent field theory simulations. These results expand the palette of polymer architectures that readily self-assemble into complex TCP structures and suggest important design considerations when targeting specific phases of interest.

Super-soft elastomers derived from bottlebrush polymers show promise as advanced materials for biomimetic tissue and device applications, but current processing strategies are restricted to simple molding. Here, we introduce a design concept that enables the three-dimensional (3D) printing of super-soft and solvent-free bottlebrush elastomers at room temperature. The key advance is a class of inks comprising statistical bottlebrush polymers that self-assemble into well-ordered body-centered cubic sphere phases. These soft solids undergo sharp and reversible yielding at 20°C in response to shear with a yield stress that can be tuned by manipulating the length scale of microphase separation. The addition of a soluble photocrosslinker allows complete ultraviolet curing after extrusion to form super-soft elastomers with near-perfect recoverable elasticity well beyond the yield strain. These structure-property design rules create exciting opportunities to tailor the performance of 3D-printed elastomers in ways that are not possible with current materials and processes., (Copyright © 2020 The Authors, some rights reserved; exclusive licensee American Association for the Advancement of Science. No claim to original U.S. Government Works. Distributed under a Creative Commons Attribution NonCommercial License 4.0 (CC BY-NC).)

Background: Vesicoureteral reflux (VUR), backflow of urine into the kidney, is associated with urinary tract infections and chronic kidney disease. Integrity of the vesicoureteral junction (VUJ), where reflux occurs, is determined largely by proper induction of the ureteric bud from the Wolffian duct. Induction is modulated by signals from the surrounding peri-Wolffian duct stroma. We evaluated whether miRNAs in the peri-Wolffian duct stroma are necessary for proper ureteric induction, VUJ formation, and suppression of VUR., Methods: We generated a mouse with loss of miRNAs in the peri-Wolffian duct stroma. We evaluated embryos for ureteric bud induction defects and expression of genes that regulate induction. We performed cystograms to assess for reflux and assessed VUJs in postnatal mice., Results: Mutant embryos had cranially displaced ureteric bud induction sites vs. controls. We observed no changes in expression of genes known to regulate induction. While mutants were early postnatal lethal, they had high rates of VUR vs. controls. Mutant VUJs that refluxed had low inserting ureters and shortened intravesicular tunnels vs. non-refluxing mice., Conclusions: We found that miRNAs in the peri-Wolffian duct stroma are required for normal ureteric bud induction, VUJ formation, and prevention of VUR.

A versatile and scalable strategy is reported for the rapid generation of block copolymer libraries spanning a wide range of compositions starting from a single parent copolymer. This strategy employs automated and operationally simple chromatographic separation that is demonstrated to be applicable to a variety of block copolymer chemistries on multigram scales with excellent mass recovery. The corresponding phase diagrams exhibit increased compositional resolution compared to those traditionally constructed via multiple, individual block copolymer syntheses. Increased uniformity and lower dispersity of the chromatographic libraries lead to differences in the location of order-order transitions and observable morphologies, highlighting the influence of dispersity on the self-assembly of block copolymers. Significantly, this separation technique greatly simplifies the exploration of block copolymer phase space across a range of compositions, monomer pairs, and molecular weights (up to 50000 amu), producing materials with increased control and homogeneity when compared to conventional strategies.

Polarity-switching photopatternable guidelines can be directly used to both orient and direct the self-assembly of block copolymers. We report the orientation and alignment of poly(styrene- block -4-trimethylsilylstyrene) (PS- b -PTMSS) with a domain periodicity, L 0 , of 44 nm on thin photopatternable grafting surface treatments (pGSTs) and cross-linkable surface treatments (pXSTs), containing acid-labile 4- tert -butoxystyrene monomer units. The surface treatment was exposed using electron beam lithography to create well-defined linear arrays of neutral and preferential regions. Directed self-assembly (DSA) of PS- b -PTMSS with much lower defectivity was observed on pXST than on pGST guidelines. The study of the effect of film thickness on photoacid diffusion by Fourier transform infrared spectroscopy and near-edge X-ray absorption fine structure spectroscopy suggested slower diffusion in thinner films, potentially enabling production of guidelines with sharper interfaces between the unexposed and exposed lines, and thus, the DSA of PS- b -PTMSS on thinner pXST guidelines resulted in better alignment control.

We introduce a design strategy to expand the range of accessible mechanical properties in covalent adaptable networks (CANs) using bottlebrush polymer building blocks. Well-defined bottlebrush polymers with rubbery poly(4-methylcaprolactone) side chains were cross-linked in formulations that include a bislactone and strong Lewis acid (tin ethylhexanoate). The resulting materials exhibit tunable stress-relaxation rates at elevated temperatures (160-180 °C) due to dynamic ester cross-links that undergo transesterification with residual hydroxy groups. Varying the cross-linker loading or bottlebrush backbone degree of polymerization yields predictable low-frequency shear moduli ca. 10-100 kPa, well below values typical of linear polymer CANs (1 MPa). These extensible networks can be stretched to strains as large as 350% before failure and undergo efficient self-healing to recover >85% of their original toughness upon repeated fracture and melt processing. In summary, molecular architecture creates new opportunities to tailor the mechanical properties of CANs in ways that are otherwise difficult to achieve.

The stability of tetrahedrally close-packed (TCP) phases in block copolymer melts is predicted by theory to depend on molecular architecture, yet no experimental studies to date have probed its effect. Motivated by this open question, here we report an efficient synthesis of asymmetric AB n miktoarm star polymers using functionalized sugars as cores for orthogonal grafting-from block copolymerizations. A combination of ring-opening and atom transfer radical polymerization produced model low dispersity materials comprising a single A = poly(lactide) (L) and multiple B = poly(dodecyl acrylate) (D) arms that amplify "conformational asymmetry" through two concerted effects: the mikto architecture and disparate block statistical segment lengths. Analyzing the self-assembly of LD 2 and LD 3 samples resulted in the discovery of two TCP phases, σ and A15, that remained stable to significantly higher A-block volume fractions as the number of B arms increased. These results experimentally establish the importance of conformational asymmetry and molecular architecture as powerful design tools for the self-assembly of block copolymers into nonclassical phases.

Asymmetric miktoarm star polymers comprising an unequal number of chemically-distinct blocks connected at a common junction produce unique material properties, yet existing synthetic strategies are beleaguered by complicated reaction schemes that are restricted in both monomer scope and yield. Here, we introduce a new synthetic approach coined "μSTAR" - Miktoarm Synthesis by Termination After Ring-opening metathesis polymerization - that circumvents these traditional synthetic limitations by constructing the block-block junction in a scalable, one-pot process involving (1) grafting-through polymerization of a macromonomer followed by (2) in-situ enyne-mediated termination to install a single mikto-arm with exceptional efficiency. This modular μSTAR platform cleanly generates AB n and A(BA') n miktoarm star polymers with unprecedented versatility in the selection of A and B chemistries as demonstrated using many common polymer building blocks: poly(siloxane), poly(acrylate), poly(methacrylate), poly(ether), poly(ester), and poly(styrene). The average number of B or BA' arms ( n ) is easily controlled by the molar equivalents of macromonomer relative to Grubbs catalyst in the initial ring-opening metathesis polymerization step. While these materials are characterized by dispersity in n that arises from polymerization statistics, they self-assemble into mesophases that are identical to those predicted for precise miktoarm stars as evidenced by small-angle X-ray scattering experiments and self-consistent field theory simulations. In summary, the μSTAR technique provides a significant boost in design flexibility and synthetic simplicity while retaining the salient phase behavior of precise miktoarm star materials., Competing Interests: The authors declare no competing financial interest.

Keratinocyte growth factor (KGF) improves cyclophosphamide-induced bladder injury. To understand the mechanisms, we subcutaneously administered KGF to mice 24 hours before i.p. cyclophosphamide administration, followed by histologic assays and immunostaining. In vehicle (phosphate-buffered saline)-pretreated mice, nonapoptotic superficial cell death from 2 to 6 hours and apoptosis in intermediate and basal cells from 4 to 24 hours was observed after cyclophosphamide. Despite superficial cell loss, KGF suppressed intermediate and basal cell apoptosis, likely via AKT signaling. At 6 and 24 hours after cyclophosphamide, KGF-pretreated mice also had apparent extracellular signal-regulated kinase (ERK)-driven proliferation of mostly keratin 5 (KRT5) + /KRT14 - intermediate cells. At 1 to 28 days after cyclophosphamide treatment, mostly KRT14 + basal progenitor cells proliferated in response to injury, peaking at 3 days in both treatment groups; however, proliferation rates were lower in the KGF group at 3 days, consistent with less injury. Three days after injury, unlike controls, KGF-pretreated mice had regenerated superficial cells. At 10 and 28 days after cyclophosphamide treatment, KGF-pretreated mice had little proliferation and marked restoration of urothelial layers, whereas the phosphate-buffered saline group had ongoing regeneration. Administration of KGF to uninjured mice reproduced ERK-driven KRT5 + /KRT14 - proliferation seen in injured mice; KRT14 + cells were unaffected. KGF pretreatment blocks cyclophosphamide-induced intermediate and basal cell apoptosis, likely by phosphorylated AKT, and drives phosphorylated ERK-mediated KRT5 + /KRT14 - cell proliferation, leading to early urothelial regeneration., (Copyright © 2020 American Society for Investigative Pathology. Published by Elsevier Inc. All rights reserved.)

Nephronophthisis is an autosomal recessive kidney disease with high genetic heterogeneity. Understanding the functions of the individual genes contributing to this disease is critical for delineating the pathomechanisms of this disorder. Here, we investigated kidney function of a novel gene associated with nephronophthisis, CEP164, coding a centriolar distal appendage protein, using a Cep164 knockout mouse model. Collecting duct-specific deletion of Cep164 abolished primary cilia from the collecting duct epithelium and led to rapid postnatal cyst growth in the kidneys. Cell cycle and biochemical studies revealed that tubular hyperproliferation is the primary mechanism that drives cystogenesis in the kidneys of these mice. Administration of roscovitine, a cell cycle inhibitor, blocked cyst growth in the cortical collecting ducts and preserved kidney parenchyma in Cep164 knockout mice. Thus, our findings provide evidence that therapeutic modulation of cell cycle activity can be an effective approach to prevent cyst progression in the kidney., (Copyright © 2019 International Society of Nephrology. Published by Elsevier Inc. All rights reserved.)

The self-assembly of block polymers into well-ordered nanostructures underpins their utility across fundamental and applied polymer science, yet only a handful of equilibrium morphologies are known with the simplest AB-type materials. Here, we report the discovery of the A15 sphere phase in single-component diblock copolymer melts comprising poly(dodecyl acrylate)- block -poly(lactide). A systematic exploration of phase space revealed that A15 forms across a substantial range of minority lactide block volume fractions ( f L = 0.25 - 0.33) situated between the σ-sphere phase and hexagonally close-packed cylinders. Self-consistent field theory rationalizes the thermodynamic stability of A15 as a consequence of extreme conformational asymmetry. The experimentally observed A15-disorder phase transition is not captured using mean-field approximations but instead arises due to composition fluctuations as evidenced by fully fluctuating field-theoretic simulations. This combination of experiments and field-theoretic simulations provides rational design rules that can be used to generate unique, polymer-based mesophases through self-assembly., Competing Interests: The authors declare no conflict of interest.

Background: Nephron progenitors, the cell population that give rise to the functional unit of the kidney, are metabolically active and self-renew under glycolytic conditions. A switch from glycolysis to mitochondrial respiration drives these cells toward differentiation, but the mechanisms that control this switch are poorly defined. Studies have demonstrated that kidney formation is highly dependent on oxygen concentration, which is largely regulated by von Hippel-Lindau (VHL; a protein component of a ubiquitin ligase complex) and hypoxia-inducible factors (a family of transcription factors activated by hypoxia)., Methods: To explore VHL as a regulator defining nephron progenitor self-renewal versus differentiation, we bred Six2-TGC tg mice with VHL lox/lox mice to generate mice with a conditional deletion of VHL from Six2 + nephron progenitors. We used histologic, immunofluorescence, RNA sequencing, and metabolic assays to characterize kidneys from these mice and controls during development and up to postnatal day 21., Results: By embryonic day 15.5, kidneys of nephron progenitor cell-specific VHL knockout mice begin to exhibit reduced maturation of nephron progenitors. Compared with controls, VHL knockout kidneys are smaller and developmentally delayed by postnatal day 1, and have about half the number of glomeruli at postnatal day 21. VHL knockout nephron progenitors also exhibit persistent Six2 and Wt1 expression, as well as decreased mitochondrial respiration and prolonged reliance on glycolysis., Conclusions: Our findings identify a novel role for VHL in mediating nephron progenitor differentiation through metabolic regulation, and suggest that VHL is required for normal kidney development., (Copyright © 2019 by the American Society of Nephrology.)

The selective deposition of polymer thin films can be achieved via spin coating by manipulating interfacial interactions. While this "spin dewetting" approach sometimes generates spatial localization on topographic and chemical patterns, the connection between material selection, process parameters, and resulting film characteristics remains poorly understood. Here, we demonstrate that accurate control over these parameters allows incomplete trichlorosilane self-assembled monolayers (SAMs) to induce spin dewetting on both homogeneous (SiO 2 ) and heterogeneous (Cu/SiO 2 or TiN/SiO 2 ) surfaces. Glassy polymers undergo a sharp transition from uniform wetting to complete dewetting depending on spin speed, solution concentration, polymer molecular weight, and SAM chemistry. Under optimal conditions, spin dewetting on line-space patterns results in the selective deposition of polymer over regions not functionalized with SAM. The insights described herein clarify the importance of different variables involved in spin dewetting and provide access to a versatile strategy for patterning polymeric thin films.

Fluoride ion batteries are potential "next-generation" electrochemical storage devices that offer high energy density. At present, such batteries are limited to operation at high temperatures because suitable fluoride ion-conducting electrolytes are known only in the solid state. We report a liquid fluoride ion-conducting electrolyte with high ionic conductivity, wide operating voltage, and robust chemical stability based on dry tetraalkylammonium fluoride salts in ether solvents. Pairing this liquid electrolyte with a copper-lanthanum trifluoride (Cu@LaF 3 ) core-shell cathode, we demonstrate reversible fluorination and defluorination reactions in a fluoride ion electrochemical cell cycled at room temperature. Fluoride ion-mediated electrochemistry offers a pathway toward developing capacities beyond that of lithium ion technology., (Copyright © 2018 The Authors, some rights reserved; exclusive licensee American Association for the Advancement of Science. No claim to original U.S. Government Works.)

The effect of catalyst strength on polyester-alcohol dynamic covalent exchange was systematically studied using Brønsted acids and a low- T g poly(4-methylcaprolactone) vitrimer formulation. Relaxation times, activation energies, and Arrhenius prefactors are correlated with p K a . Strong protic acids induce facile network relaxation at 25 °C on the order of 10 4 -10 5 s, significantly faster than Lewis acid alternatives that function only above 100 °C. Activation energies span 49-67 kJ/mol and increase as p K a decreases. The opposite trend is observed with the Arrhenius prefactor. We anticipate that the quantitative understanding of Brønsted acid effects disclosed herein will be of utility in future studies that exploit acid-catalyzed dynamic covalent bond exchange.

Background: Obesity has been associated with complications after a total knee arthroplasty (TKA). Surgical site infection (SSI) after TKA is one of the feared complications as it increases revision rates, costs, and stress to the patient. There is conflicting evidence in the literature regarding body mass index (BMI) and risk of infection after TKA, and some studies have suggested that site-specific fat distribution may be a better metric for determining risk of postoperative infections. Here, we investigate the correlation of soft tissue distribution about the knee to SSI after TKA., Methods: We retrospectively review 572 patients who underwent primary TKA at a single institution from 2006 to 2010. We introduce the prepatellar fat thickness ratio (PFTR) as a radiographic means to quantitatively assess fat distribution about the knee and evaluate this measurement's ability to assess the risk of developing an SSI after TKA., Results: The PFTR was shown to be a better predictor of SSI than BMI in both the univariate (P = .05) and multivariate (P = .01) analyses., Conclusion: Although BMI cannot fully account for variations in adipose distribution, the PFTR may account for this variability and may be a helpful tool for assessing a patient's preoperative risk of SSI after TKA., (Copyright © 2018 Elsevier Inc. All rights reserved.)

Eukaryotic cilia are assembled by intraflagellar transport (IFT) where large protein complexes called IFT particles move ciliary components from the cell body to the cilium. Defects in most IFT particle proteins disrupt ciliary assembly and cause mid gestational lethality in the mouse. IFT25 and IFT27 are unusual components of IFT-B in that they are not required for ciliary assembly and mutant mice survive to term. The mutants die shortly after birth with numerous organ defects including duplex kidneys. Completely duplex kidneys result from defects in ureteric bud formation at the earliest steps of metanephric kidney development. Ureteric bud initiation is a highly regulated process involving reciprocal signaling between the ureteric epithelium and the overlying metanephric mesenchyme with regulation by the peri-Wolffian duct stroma. The finding of duplex kidney in Ift25 and Ift27 mutants suggests functions for these genes in regulation of ureteric bud initiation. Typically the deletion of IFT genes in the kidney causes rapid cyst growth in the early postnatal period. In contrast, the loss of Ift25 results in smaller kidneys, which show only mild tubule dilations that become apparent in adulthood. The smaller kidneys appear to result from reduced branching in the developing metanephric kidney. This work indicates that IFT25 and IFT27 are important players in the early development of the kidney and suggest that duplex kidney is part of the ciliopathy spectrum., (Copyright © 2018 Elsevier B.V. All rights reserved.)