Search

Driving the nuclear fusion reaction p+11B -> 3 alpha + 8.7 MeV in laboratory conditions, by interaction between high-power laser pulses and matter, has become a popular field of research, due to numerous applications that it can potentially allow: an alternative to deuterium-tritium (DT) for fusion energy production, astrophysics studies and alpha-particle generation for medical treatments. A possible scheme for laser-driven p-11B reactions is to direct a beam of laser-accelerated protons onto a boron sample (the so-called 'pitcher-catcher' scheme). This technique was successfully implemented on large, energetic lasers, yielding hundreds of joules per shot at low repetition. We present here a complementary approach, exploiting the high-repetition rate of the VEGA III petawatt laser at CLPU (Spain), aiming at accumulating results from many interactions at much lower energy, for better controlling the parameters and the statistics of the measurements. Despite a moderate energy per pulse, our experiment allowed exploring the laser-driven fusion process with tens (up to hundreds) of laser shots. The experiment provided a clear signature of the produced reactions and of the fusion products, accumulated over many shots, leading to an improved optimization of the diagnostic for these experimental campaigns In this paper we discuss the effectiveness of the laser-driven p-11B fusion in the pitcher-catcher scheme, at high-repetition rate, addressing the challenges of this experimental scheme and highlighting its critical aspects. Our proposed methodologies allow evaluating the performance of this scheme for laser-driven alpha particle production and can be adapted to high-repetition rate laser facilities with higher energy and intensity.

Laser technologies improved after the understanding of the Chirped Pulse Amplification (CPA) which allows energetic laser beams to be compressed to tens of femtosecond (fs) pulse durations and focused to few $\mu$m. Protons of tens of MeV can be accelerated using for instance the Target Normal Sheath Acceleration (TNSA) method and focused on secondary targets. In such conditions, nuclear reactions can occur and radioisotopes relevant for medical purposes be produced. High repetition lasers can be used to produce enough isotopes for medical applications. This route is competitive to conventional methods mostly based on accelerators. In this paper we study the production of $^{67}$Cu, $^{63}$Zn, $^{18}$F and $^{11}$C currently used in positron emission tomography (PET) and other applications. At the same time, we study the reaction $^{10}$B(p,$\alpha$)$^{7}$Be and $^{70}$Zn(p,4n)$^{67}$Ga to put further constraints to the proton distributions at different angles and to the reaction $^{11}$B(p,$\alpha$)$^{8}$Be relevant for energy production. The experiment was performed at the 1 petawatt (PW) laser facility at Vega III located in Salamanca-Spain. Angular distributions of radioisotopes in the forward (with respect to the laser direction) and backward directions were measured using a High Purity Germanium Detector (HPGE). Our results are reasonably reproduced by the numerical estimates following the approach of Kimura et al. (NIMA637(2011)167)

Investigating the potential benefits of the use of magnetic fields in Inertial Confinement Fusion (ICF) experiments has given rise to new experimental platforms like the Magnetized Liner Inertial Fusion (MagLIF) approach at the Z-machine (Sandia National Laboratories), or its laser-driven equivalent at OMEGA (Laboratory for Laser Energetics). Implementing these platforms at MJ-scale laser facilities, such as the Laser MegaJoule (LMJ) or the National Ignition Facility (NIF), is crucial to reaching self-sustained nuclear fusion and enlarges the level of magnetization that can be achieved through a higher compression. In this paper, we present a complete design of an experimental platform for magnetized implosions using cylindrical targets at LMJ. A seed magnetic field is generated along the axis of the cylinder using laser-driven coil targets, minimizing debris and increasing diagnostic access compared with pulsed power field generators. We present a comprehensive simulation study of the initial B-field generated with these coil targets, as well as 2-dimensional extended magneto-hydrodynamics (MHD) simulations showing that a 5T initial B-field is compressed up to 25kT during the implosion. Under these circumstances, the electrons become magnetized, which severely modifies the plasma conditions at stagnation. In particular, in the hot spot the electron temperature is increased (from 1keV to 5keV) while the density is reduced (from 40gcc to 7gcc). We discuss how these changes can be diagnosed using X-ray imaging and spectroscopy, and particle diagnostics. We propose the simultaneous use of two dopants in the fuel (Ar and Kr) to act as spectroscopic tracers. We show that this introduces an effective spatial resolution in the plasma which permits an unambiguous observation of the B-field effects. Additionally, we present a plan for future experiments of this kind at LMJ.

We report results and modelling of an experiment performed at the TAW Vulcan laser facility, aimed at investigating laser-plasma interaction in conditions which are of interest for the Shock Ignition scheme to Inertial Confinement Fusion, i.e. laser intensity higher than 10^16 W/cm2 impinging on a hot (T > 1 keV), inhomogeneous and long scalelength preformed plasma. Measurements show a significant SRS backscattering (4 - 20% of laser energy) driven at low plasma densities and no signatures of TPD/SRS driven at the quarter critical density region. Results are satisfactorily reproduced by an analytical model accounting for the convective SRS growth in independent laser speckles, in conditions where the reflectivity is dominated by the contribution from the most intense speckles, where SRS gets saturated. Analytical and kinetic simulations well reproduce the onset of SRS at low plasma densities in a regime strongly affected by non linear Landau damping and by filamentation of the most intense laser speckles. The absence of TPD/SRS at higher densities is explained by pump depletion and plasma smoothing driven by filamentation. The prevalence of laser coupling in the low density profile justifies the low temperature measured for hot electrons (7 - 12 keV), well reproduced by numerical simulations.

We report on the development of a highly directional, narrow energy band, short time duration proton beam operating at high repetition rate, suitable for measurements of stopping power in high energy density plasmas as well as other applications. The protons are generated with an ultrashort-pulse laser interacting with a solid target and converted to a pencil-like narrow-band beam using a compact magnet-based energy selector. We experimentally demonstrate the production of a proton beam with an energy of 500 keV and energy spread well below 10%, and a pulse duration of 260 ps. The energy loss of this beam is measured in a 2 ${\mu}$m thick solid Mylar target and found to be in within 1% of theoretical predictions. The short time duration of the proton pulse makes it particularly well suited for applications involving the probing of highly transient plasma states produced in laser-matter interaction experiments, in particular measurements of proton stopping power.

As an alternative inertial confinement fusion scheme with predicted high energy gain and more robust designs, shock ignition requires a strong converging shock driven by a shaped pulse with a high-intensity spike at the end to ignite a pre-compressed fusion capsule. Understanding nonlinear laser-plasma instabilities in shock ignition conditions is crucial to assess and improve the laser-shock energy coupling. Recent experiments conducted on the OMEGA-EP laser facility have for the first time demonstrated that such instabilities can $\sim$100\% deplete the first 0.5 ns of the high-intensity laser pump. Analysis of the observed laser-generated blast wave suggests that this pump-depletion starts at 0.01--0.02 critical density and progresses to 0.1--0.2 critical density. This pump-depletion is also confirmed by the time-resolved stimulated Raman backscattering spectra. The dynamics of the pump-depletion can be explained by the breaking of ion-acoustic waves in stimulated Brillouin scattering. Such strong pump-depletion would inhibit the collisional laser energy absorption but may benefit the generation of hot electrons with moderate temperatures for electron shock ignition [Shang et al. Phys. Rev. Lett. 119 195001 (2017)].

The double laser pulse approach to relativistic electron beam (REB) collimation has been investigated at the LULI-ELFIE facility. In this scheme, the magnetic field generated by the first laser-driven REB is used to guide a second delayed REB. We show how electron beam collimation can be controlled by properly adjusting laser parameters. By changing the ratio of focus size and the delay time between the two pulses we found a maximum of electron beam collimation clearly dependent on the focal spot size ratio of the two laser pulses and related to the magnetic field dynamics. Cu-K alpha and CTR imaging diagnostics were implemented to evaluate the collimation effects on the respectively low energy (< 100 keV) and high energy (> MeV) components of the REB.

Hot electrons role in shock generation and energy deposition to hot dense core is crucial for the shock ignition scheme implying the need for their characterization at laser intensities of interest for shock ignition. In this paper we analyze the experimental results obtained at the PALS laboratory and provide an estimation of hot electrons temperature and conversion efficiency using a semi analytical approach, including Harrach-Kidder's model., Comment: Has been accepted in Physics of Plasma journal

A promising prototype of a highly adjustable Kirkpatrick-Baez (KB) microscope has been designed, built and tested in a number of laser driven x-ray experiments using the high power (200TW) VEGA-2 laser system of the Spanish Centre for Pulsed Lasers (CLPU). The presented KB version consists of two, perpendicularly mounted, 500{\mu}m thick Silicon wafers, coated with a few tens of nm layer of Platinum unlike the conventional, coated, millimetre thick glass substrates, affording more bending flexibility and large adjustment range. According to simulations, and based on total external reflection, this KB offers a broad-band multi-keV reflection spectra, allowing more spectral tunablity than conventional Bragg crystals. In addition to be vacuum compatible, the prototype is characterised by a relatively small size (21cm x 31cm x 27cm) and permits remote control and modification of both the radius of curvature (down to 10m) and the grazing incidence angle (up to 60mrad). A few examples of focusing performance tests, limitations and experimental campaign results are discussed.

X-ray phase-contrast imaging (XPCI) is a versatile technique with wide-ranging applications, particularly in the fields of biology and medicine. Where X-ray absorption radiography requires high density ratios for effective imaging, XPCI is more sensitive to the density gradients inside a material. In this letter, we apply XPCI to the study of laser-driven shockc waves. We used two laser beams from the Petawatt High-Energy Laser for Heavy Ion EXperiments (PHELIX) at GSI: one to launch a shock wave and the other to generate an X-ray source for XPCI. Our results suggest that this technique is suitable for the study of warm dense matter (WDM), inertial confinement fusion (ICF) and laboratory astrophysics.

Powerful laser-plasma processes are explored to generate discharge currents of a few $100\,$kA in coil targets, yielding magnetostatic fields (B-fields) in excess of $0.5\,$kT. The quasi-static currents are provided from hot electron ejection from the laser-irradiated surface. According to our model, describing qualitatively the evolution of the discharge current, the major control parameter is the laser irradiance $I_{\mathrm{las}}\lambda_{\mathrm{las}}^2$. The space-time evolution of the B-fields is experimentally characterized by high-frequency bandwidth B-dot probes and by proton-deflectometry measurements. The magnetic pulses, of ns-scale, are long enough to magnetize secondary targets through resistive diffusion. We applied it in experiments of laser-generated relativistic electron transport into solid dielectric targets, yielding an unprecedented 5-fold enhancement of the energy-density flux at $60 \,\mathrm{\mu m}$ depth, compared to unmagnetized transport conditions. These studies pave the ground for magnetized high-energy density physics investigations, related to laser-generated secondary sources of radiation and/or high-energy particles and their transport, to high-gain fusion energy schemes and to laboratory astrophysics., Comment: 11 pages, 7 figures, invited APS

High-energy-density flows through dense matter are needed for effective progress in the production of laser-driven intense sources of energetic particles and radiation, in driving matter to extreme temperatures creating state regimes relevant for planetary or stellar science as yet inaccessible at the laboratory scale, or in achieving high-gain laser-driven thermonuclear fusion. When interacting at the surface of dense (opaque) targets, intense lasers accelerate relativistic electron beams which transport a significant fraction of the laser energy into the target depth. However, the overall laser-to-target coupling efficiency is impaired by the large divergence of the electron beam, intrinsic to the laser-plasma interaction. By imposing a longitudinal 600T laser-driven magnetic-field, our experimental results show guided >10MA-current of MeV-electrons in solid matter. Due to the applied magnetic field, the transported energy-density and the peak background electron temperature at the 60micron-thick targets rear surface rise by factors 5, resulting from unprecedentedly efficient guiding of relativistic electron currents., Comment: 11 pages, 7 figures

Quasi-static magnetic-fields up to $800\,$T are generated in the interaction of intense laser pulses ($500\,$J, $1\,$ns, $10^{17}\,$W/cm$^2$) with capacitor-coil targets of different materials. The reproducible magnetic-field peak and rise-time, consistent with the laser pulse duration, were accurately inferred from measurements with GHz-bandwidth inductor pickup coils (B-dot probes). Results from Faraday rotation of polarized optical laser light and deflectometry of energetic proton beams are consistent with the B-dot probe measurements at the early stages of the target charging, up to $t\approx 0.35\,$ns, and then are disturbed by radiation and plasma effects. The field has a dipole-like distribution over a characteristic volume of $1\,$mm$^3$, which is coherent with theoretical expectations. These results demonstrate a very efficient conversion of the laser energy into magnetic fields, thus establishing a robust laser-driven platform for reproducible, well characterized, generation of quasi-static magnetic fields at the kT-level, as well as for magnetization and accurate probing of high-energy-density samples driven by secondary powerful laser or particle beams., Comment: 16 pages, 7 figures

The advance in laser plasma acceleration techniques pushes the regime of the resulting accelerated particles to higher energies and intensities. In particular the upcoming experiments with the FLAME laser at LNF will enter the GeV regime with almost 1pC of electrons. From the current status of understanding of the acceleration mechanism, relatively large angular and energy spreads are expected. There is therefore the need to develop a device capable to measure the energy of electrons over three orders of magnitude (few MeV to few GeV) under still unknown angular divergences. Within the PlasmonX experiment at LNF a spectrometer is being constructed to perform these measurements. It is made of an electro-magnet and a screen made of scintillating fibers for the measurement of the trajectories of the particles. The large range of operation, the huge number of particles and the need to focus the divergence present unprecedented challenges in the design and construction of such a device. We will present the design considerations for this spectrometer and the first results from a prototype., Comment: 7 pages, 6 figures, submitted to NIM A