Search

Future cosmic microwave background (CMB) experiments are primarily targeting a detection of the primordial $B$-mode polarisation. The faintness of this signal requires exquisite control of systematic effects which may bias the measurements. In this work, we derive requirements on the relative calibration accuracy of the overall polarisation gain ($\Delta g_\nu$) for LiteBIRD experiment, through the application of the blind Needlet Internal Linear Combination (NILC) foreground-cleaning method. We find that minimum variance techniques, as NILC, are less affected by gain calibration uncertainties than a parametric approach, which requires a proper modelling of these instrumental effects. The tightest constraints are obtained for frequency channels where the CMB signal is relatively brighter (166 GHz channel, $\Delta {g}_\nu \approx 0.16 \%$), while, with a parametric approach, the strictest requirements were on foreground-dominated channels. We then propagate gain calibration uncertainties, corresponding to the derived requirements, into all frequency channels simultaneously. We find that the overall impact on the estimated $r$ is lower than the required budget for LiteBIRD by almost a factor $5$. The adopted procedure to derive requirements assumes a simple Galactic model. We therefore assess the robustness of obtained results against more realistic scenarios by injecting the gain calibration uncertainties, according to the requirements, into LiteBIRD simulated maps and assuming intermediate- and high-complexity sky models. In this case, we employ the so-called Multi-Clustering NILC (MC-NILC) foreground-cleaning pipeline and obtain that the impact of gain calibration uncertainties on $r$ is lower than the LiteBIRD gain systematics budget for the intermediate-complexity sky model. For the high-complexity case, instead, it would be necessary to tighten the requirements by a factor $1.8$., Comment: 29 pages, 11 figures

We present an improved zodiacal light model for COBE-DIRBE derived through global Bayesian analysis within the Cosmoglobe Data Release 2 framework. The parametric form of the ZL model is identical to that introduced by Kelsall et al. (1998), but the specific best-fit parameter values are re-derived using the combination of DIRBE Calibrated Individual Observations, Planck HFI sky maps, and WISE and Gaia compact object catalogs. Furthermore, the ZL parameters are fitted jointly with astrophysical parameters, such as thermal dust and starlight emission, and the new model takes into account excess radiation that appears stationary in solar-centric coordinates as reported in a companion paper. The relative differences between the predicted signals from K98 and our new model are $\lesssim 5\%$ in the 12 and 25 $\mu$m channels over the full sky. The zero-levels of the cleaned DR2 maps are lower than those of the K98 Zodiacal light Subtracted Mission Average maps by $\sim 10$ kJy/sr at 1.25-3.5 $\mu$m, which is larger than the entire predicted contribution from high-redshift galaxies to the Cosmic Infrared Background at the same wavelengths. The total RMS of each DR2 map at wavelengths up to and including 25 $\mu$m are $\sim 30$ $\%$ lower at high Galactic latitudes than the corresponding DIRBE ZSMA maps. Still, obvious ZL residuals can be seen in several of the DR2 maps, and further work is required to mitigate these. Joint analysis with existing and future high-resolution full-sky surveys such as AKARI, IRAS, Planck HFI, and SPHEREx will be essential both to break key degeneracies in the current model and to determine whether the reported solar-centric excess radiation has a ZL or instrumental origin. Thus, while the results presented in this paper do redefine the state-of-the-art for DIRBE modelling, it also only represents the first among many steps toward a future optimal Bayesian ZL model., Comment: 27 pages, 21 figures, submitted to A&A

We present the first global Bayesian analysis of the time-ordered DIRBE data within the Cosmoglobe framework, building on the same methodology that has previously been successfully applied to Planck LFI and WMAP. These data are analyzed jointly with COBE-FIRAS, Gaia, Planck HFI, and WISE, allowing for more accurate instrumental and astrophysical characterization than possible through single-experiment analysis. This paper provides an overview of the analysis pipeline and main results, and we present and characterize a new set of zodiacal light subtracted mission average (ZSMA) DIRBE maps spanning 1.25 to 240 $\mu$m. A novel aspect of this processing is the characterization and removal of excess radiation between 4.9 and 60$\,\mu$m that appears static in solar-centric coordinates. The DR2 ZSMA maps have several advantages with respect to the previously available maps, including 1) lower zodiacal light (and possibly straylight) residuals; 2) better determined zero-levels; 3) natively HEALPix tessellated maps with a $7'$ pixel size; 4) nearly white noise at pixel scales; and 5) a more complete and accurate noise characterization established through the combination of MCMC samples and half-mission maps. In addition, because the model has been simultaneously fitted with both DIRBE and HFI data, this is the first consistent unification of the infrared and CMB wavelength ranges into one global sky model covering 100 GHz to 1 $\mu$m. However, even though the new maps are improved with respect to the official maps, and should be preferred for most future analyses that require DIRBE sky maps, they still exhibit non-negligible zodiacal light residuals between 12 and 60$\,\mu$m. Further improvements should be made through joint analysis with complementary infrared experiments such IRAS, AKARI, WISE and SPHEREx, and releasing the full combined potential of all these powerful infrared observatories., Comment: 30 pages, 23 figures, submitted to A&A. Comments welcome! Data can be found at https://www.cosmoglobe.uio.no/products/cosmoglobe-dr2.html

LiteBIRD, the next-generation cosmic microwave background (CMB) experiment, aims for a launch in Japan's fiscal year 2032, marking a major advancement in the exploration of primordial cosmology and fundamental physics. Orbiting the Sun-Earth Lagrangian point L2, this JAXA-led strategic L-class mission will conduct a comprehensive mapping of the CMB polarization across the entire sky. During its 3-year mission, LiteBIRD will employ three telescopes within 15 unique frequency bands (ranging from 34 through 448 GHz), targeting a sensitivity of 2.2\,$\mu$K-arcmin and a resolution of 0.5$^\circ$ at 100\,GHz. Its primary goal is to measure the tensor-to-scalar ratio $r$ with an uncertainty $\delta r = 0.001$, including systematic errors and margin. If $r \geq 0.01$, LiteBIRD expects to achieve a $>5\sigma$ detection in the $\ell=$2-10 and $\ell=$11-200 ranges separately, providing crucial insight into the early Universe. We describe LiteBIRD's scientific objectives, the application of systems engineering to mission requirements, the anticipated scientific impact, and the operations and scanning strategies vital to minimizing systematic effects. We will also highlight LiteBIRD's synergies with concurrent CMB projects., Comment: 23 pages, 9 figures, 1 table, SPIE Astronomical Telescopes + Instrumentation 2024

We derive new constraints on the CIB monopole spectrum from a set of reprocessed COBE-DIRBE sky maps that have lower instrumental and astrophysical contamination than the legacy DIRBE maps. These maps have been generated through a global Bayesian analysis framework that simultaneously fits cosmological, astrophysical, and instrumental parameters, as described in a series of papers collectively referred to as Cosmoglobe DR2. We have applied this method to the DIRBE TODs, complemented by selected HFI and FIRAS sky maps to break key astrophysical degeneracies, as well as WISE and Gaia compact object catalogs. In this paper, we focus on the CIB monopole constraints that result from this work. We report positive detections of an isotropic signal in six out of the ten DIRBE bands (1.25, 2.2, 3.5, 100, 140, and 240 $\mathrm{\mu m}$). For the 2.2 $\mu$m channel, we find an amplitude of $10.2\pm1.2\,\mathrm{nW\,m^{-2}\,sr^{-1}}$, 74 % lower than that reported from the official DIRBE maps. For the 240 $\mu\mathrm{m}$ channel, we find $6\pm3\mathrm{nW\,m^{-2}\,sr^{-1}}$, 56 % lower than the official DIRBE release. We interpret these lower values as resulting from improved zodiacal light and Galactic foreground modeling. For the bands between 4.9 and 60 $\mu\mathrm{m}$, the presence of excess radiation in solar-centric coordinates precludes the definition of lower limits. However, the analysis still provides well-defined upper limits. For the 12 $\mu\mathrm{m}$ channel, we find an upper 95 % confidence limit of 55 $\mathrm{nW\,m^{-2}\,sr^{-1}}$, more than a factor of eight lower than the corresponding legacy result of 468 $\mathrm{nW\,m^{-2}\,sr^{-1}}$. The results presented in this paper redefine the state-of-the-art CIB monopole constraints from COBE-DIRBE, and provide a real-world illustration of the power of global end-to-end analysis of multiple complementary datasets., Comment: 17 pages, 9 figures, submitted to A&A. Comments welcome! Data products can be found at https://www.cosmoglobe.uio.no/products/cosmoglobe-dr2.html

We revisit the impact of finite time responses of bolometric detectors used for deep observations of the cosmic microwave background (CMB). Until now, bolometer transfer functions have been accounted for through a two-step procedure by first deconvolving an estimate of their Fourier-space representation from the raw time-ordered data (TOD), and then averaging the deconvolved TOD into pixelized maps. However, for many experiments, including the Planck High Frequency Instrument (HFI), it is necessary to apply an additional low-pass filter to avoid an excessive noise boost, which leads to an asymmetric effective beam. In this paper we demonstrate that this effect can be avoided if the transfer function deconvolution and pixelization operations are performed simultaneously through integrated maximum likelihood mapmaking. The resulting algorithm is structurally identical to the artDeco algorithm introduced by Keih\"anen & Reinecke (2012) for beam deconvolution. We illustrate the relevance of this method with simulated Planck HFI 143 GHz data, and find that the resulting effective beam is both more symmetric than with the two-step procedure, resulting in a sky-averaged ellipticity that is 64 % lower, and an effective beam full-width-at-half-maximum (FWHM) that is 2.3 % smaller. Similar improvements are expected for any other bolometer-based CMB experiments with long time constants., Comment: 7 pages, 11 figures

We present the first degree-scale tomography map of the dusty magnetized interstellar medium (ISM) from stellar polarimetry and distance measurements. We used the RoboPol polarimeter at Skinakas Observatory to conduct a survey of starlight polarization in a region of the sky of 4 square degrees. We propose a Bayesian method to decompose the stellar-polarization source field along the distance to invert the 3D volume occupied by the observed stars. We used it to obtain the first 3D map of the dusty magnetized ISM. Specifically, we produced a tomography map of the orientation of the plane-of-sky (POS) component of the magnetic field threading the diffuse, dusty regions responsible for the stellar polarization. For the targeted region centered on Galactic coordinates $(l,b) \approx (103.3^\circ, 22.3^\circ)$, we identified several ISM clouds. Most of the lines of sight intersect more than one cloud. A very nearby component was detected in the foreground of a dominant component from which most of the polarization signal comes. Farther clouds, with a distance of up to 2~kpc, were similarly detected. Some of them likely correspond to intermediate-velocity clouds seen in HI spectra in this region of the sky. We found that the orientation of the POS component of the magnetic field changes along distance for most of the lines of sight. Our study demonstrates that starlight polarization data coupled to distance measures have the power to reveal the great complexity of the dusty magnetized ISM in 3D and, in particular, to provide local measurements of the POS component of the magnetic field. This demonstrates that the inversion of large data volumes, as expected from the PASIPHAE survey, will provide the necessary means to move forward in the modeling of the Galactic magnetic field and of the dusty magnetized ISM as a contaminant in observations of the cosmic microwave background polarization., Comment: Preprint of the accepted version at Astronomy & Astrophysics. The 3D map obtained in this paper can be visualized online at https://pasiphae.science/visualization and a video featuring it is accessible at https://www.youtube.com/watch?v=dB_6J1zhmPI

We present a study of the impact of an uncertainty in the beam far side-lobe knowledge on the measurement of the Cosmic Microwave Background $B$-mode signal at large scale. It is expected to be one of the main source of systematic effects in future CMB observations. Because it is crucial for all-sky survey missions to take into account the interplays between beam systematic effects and all the data analysis steps, the primary goal of this paper is to provide the methodology to carry out the end-to-end study of their effect for a space-borne CMB polarization experiment, up to the cosmological results in the form of a bias $\delta r$ on the tensor-to-scalar ratio $r$. LiteBIRD is dedicated to target the measurement of CMB primordial $B$ modes by reaching a sensitivity of $\sigma \left( r \right) \leq 10^{-3}$ assuming $r=0$. As a demonstration of our framework, we derive the relationship between the knowledge of the beam far side-lobes and the tentatively allocated error budget under given assumptions on design, simulation and component separation method. We assume no mitigation of the far side-lobes effect at any stage of the analysis pipeline. We show that $\delta r$ is mostly due to the integrated fractional power difference between the estimated beams and the true beams in the far side-lobes region, with little dependence on the actual shape of the beams, for low enough $\delta r$. Under our set of assumptions, in particular considering the specific foreground cleaning method we used, we find that the integrated fractional power in the far side-lobes should be known at a level as tight as $\sim 10^{-4}$, to achieve the required limit on the bias $\delta r < 1.9 \times 10^{-5}$. The framework and tools developed for this study can be easily adapted to provide requirements under different design, data analysis frameworks and for other future space-borne experiments beyond LiteBIRD.

We study the possibility of using the $LiteBIRD$ satellite $B$-mode survey to constrain models of inflation producing specific features in CMB angular power spectra. We explore a particular model example, i.e. spectator axion-SU(2) gauge field inflation. This model can source parity-violating gravitational waves from the amplification of gauge field fluctuations driven by a pseudoscalar "axionlike" field, rolling for a few e-folds during inflation. The sourced gravitational waves can exceed the vacuum contribution at reionization bump scales by about an order of magnitude and can be comparable to the vacuum contribution at recombination bump scales. We argue that a satellite mission with full sky coverage and access to the reionization bump scales is necessary to understand the origin of the primordial gravitational wave signal and distinguish among two production mechanisms: quantum vacuum fluctuations of spacetime and matter sources during inflation. We present the expected constraints on model parameters from $LiteBIRD$ satellite simulations, which complement and expand previous studies in the literature. We find that $LiteBIRD$ will be able to exclude with high significance standard single-field slow-roll models, such as the Starobinsky model, if the true model is the axion-SU(2) model with a feature at CMB scales. We further investigate the possibility of using the parity-violating signature of the model, such as the $TB$ and $EB$ angular power spectra, to disentangle it from the standard single-field slow-roll scenario. We find that most of the discriminating power of $LiteBIRD$ will reside in $BB$ angular power spectra rather than in $TB$ and $EB$ correlations., Comment: 22 pages, 13 figures. Submitted to JCAP

We present the first model of full-sky polarized synchrotron emission that is derived from all WMAP and Planck LFI frequency maps. The basis of this analysis is the set of end-to-end reprocessed Cosmoglobe Data Release 1 sky maps presented in a companion paper, which have significantly lower instrumental systematics than the legacy products from each experiment. We find that the resulting polarized synchrotron amplitude map has an average noise rms of $3.2\,\mathrm{\mu K}$ at 30 GHz and $2^{\circ}$ FWHM, which is 30% lower than the recently released BeyondPlanck model that included only LFI+WMAP Ka-V data, and 29% lower than the WMAP K-band map alone. The mean $B$-to-$E$ power spectrum ratio is $0.40\pm0.02$, with amplitudes consistent with those measured previously by Planck and QUIJOTE. Assuming a power law model for the synchrotron spectral energy distribution, and using the $T$--$T$ plot method, we find a full-sky inverse noise-variance weighted mean of $\beta_{\mathrm{s}}=-3.07\pm0.07$ between Cosmoglobe DR1 K-band and 30 GHz, in good agreement with previous estimates. In summary, the novel Cosmoglobe DR1 synchrotron model is both more sensitive and systematically cleaner than similar previous models, and it has a more complete error description that is defined by a set of Monte Carlo posterior samples. We believe that these products are preferable over previous Planck and WMAP products for all synchrotron-related scientific applications, including simulation, forecasting and component separation., Comment: 15 pages, 15 figures, submitted to A&A

We implement support for a cosmological parameter estimation algorithm as proposed by Racine et al. (2016) in Commander, and quantify its computational efficiency and cost. For a semi-realistic simulation similar to Planck LFI 70 GHz, we find that the computational cost of producing one single sample is about 20 CPU-hours and that the typical Markov chain correlation length is $\sim$100 samples. The net effective cost per independent sample is $\sim$2 000 CPU-hours, in comparison with all low-level processing costs of 812 CPU-hours for Planck LFI and WMAP in Cosmoglobe Data Release 1. Thus, although technically possible to run already in its current state, future work should aim to reduce the effective cost per independent sample by one order of magnitude to avoid excessive runtimes, for instance through multi-grid preconditioners and/or derivative-based Markov chain sampling schemes. This work demonstrates the computational feasibility of true Bayesian cosmological parameter estimation with end-to-end error propagation for high-precision CMB experiments without likelihood approximations, but it also highlights the need for additional optimizations before it is ready for full production-level analysis., Comment: 10 pages, 8 figures. Accepted in A&A

Next-generation wide-field optical polarimeters like the Wide-Area Linear Optical Polarimeters (WALOPs) have a field of view (FoV) of tens of arcminutes. For efficient and accurate calibration of these instruments, wide-field polarimetric flat sources will be essential. Currently, no established wide-field polarimetric standard or flat sources exist. This paper tests the feasibility of using the polarized sky patches of the size of around ten-by-ten arcminutes, at a distance of up to 20 degrees from the Moon, on bright-Moon nights as a wide-field linear polarimetric flat source. We observed 19 patches of the sky adjacent to the bright-Moon with the RoboPol instrument in the SDSS-r broadband filter. These were observed on five nights within two days of the full-Moon across two RoboPol observing seasons. We find that for 18 of the 19 patches, the uniformity in the measured normalized Stokes parameters $q$ and $u$ is within 0.2 %, with 12 patches exhibiting uniformity within 0.07 % or better for both $q$ and $u$ simultaneously, making them reliable and stable wide-field linear polarization flats. We demonstrate that the sky on bright-Moon nights is an excellent wide-field linear polarization flat source. Various combinations of the normalized Stokes parameters $q$ and $u$ can be obtained by choosing suitable locations of the sky patch with respect to the Moon, Comment: 8 pages including appendix, 6 figures and 3 tables. Submitted to Astronomy and Astrophysics for review. Comments are welcome

Cosmic birefringence is a parity-violating effect that might have rotated the plane of linearly polarized light of the cosmic microwave background (CMB) by an angle $\beta$ since its emission. This has recently been measured to be non-zero at a statistical significance of $3.6\sigma$ in the official Planck PR4 and 9-year WMAP data. In this work, we constrain $\beta$ using the reprocessed BeyondPlanck LFI and Cosmoglobe DR1 WMAP polarization maps. These novel maps have both lower systematic residuals and a more complete error description than the corresponding official products. Foreground $EB$ correlations could bias measurements of $\beta$, and while thermal dust $EB$ emission has been argued to be statistically non-zero, no evidence for synchrotron $EB$ power has been reported. Unlike the dust-dominated Planck HFI maps, the majority of the LFI and WMAP polarization maps are instead dominated by synchrotron emission. Simultaneously constraining $\beta$ and the polarization miscalibration angle, $\alpha$, of each channel, we find a best-fit value of $\beta=0.35^{\circ}\pm0.70^{\circ}$ with LFI and WMAP data only. When including the Planck HFI PR4 maps, but fitting $\beta$ separately for dust-dominated, $\beta_{>70\,\mathrm{GHz}}$, and synchrotron-dominated channels, $\beta_{\leq 70\,\mathrm{GHz}}$, we find $\beta_{\leq 70\,\mathrm{GHz}}=0.53^{\circ}\pm0.28^\circ$. This differs from zero with a statistical significance of $1.9\sigma$, and the main contribution to this value comes from the LFI 70 GHz channel. While the statistical significances of these results are low on their own, the measurement derived from the LFI and WMAP synchrotron-dominated maps agrees with the previously reported HFI-dominated constraints, despite the very different astrophysical and instrumental systematics involved in all these experiments., Comment: 10 pages, 7 figures, 2 tables. Submitted to A&A

We present Cosmoglobe Data Release 1, which implements the first joint analysis of WMAP and Planck LFI time-ordered data, processed within a single Bayesian end-to-end framework. This framework builds directly on a similar analysis of the LFI measurements by the BeyondPlanck collaboration, and approaches the CMB analysis challenge through Gibbs sampling of a global posterior distribution, simultaneously accounting for calibration, mapmaking, and component separation. The computational cost of producing one complete WMAP+LFI Gibbs sample is 812 CPU-hr, of which 603 CPU-hrs are spent on WMAP low-level processing; this demonstrates that end-to-end Bayesian analysis of the WMAP data is computationally feasible. We find that our WMAP posterior mean temperature sky maps and CMB temperature power spectrum are largely consistent with the official WMAP9 results. Perhaps the most notable difference is that our CMB dipole amplitude is $3366.2 \pm 1.4\ \mathrm{\mu K}$, which is $11\ \mathrm{\mu K}$ higher than the WMAP9 estimate and $2.5\ {\sigma}$ higher than BeyondPlanck; however, it is in perfect agreement with the HFI-dominated Planck PR4 result. In contrast, our WMAP polarization maps differ more notably from the WMAP9 results, and in general exhibit significantly lower large-scale residuals. We attribute this to a better constrained gain and transmission imbalance model. It is particularly noteworthy that the W-band polarization sky map, which was excluded from the official WMAP cosmological analysis, for the first time appears visually consistent with the V-band sky map. Similarly, the long standing discrepancy between the WMAP K-band and LFI 30 GHz maps is finally resolved, and the difference between the two maps appears consistent with instrumental noise at high Galactic latitudes. All maps and the associated code are made publicly available through the Cosmoglobe web page., Comment: 65 pages, 61 figures. Data available at cosmoglobe.uio.no. Submitted to A&A

LiteBIRD is a planned JAXA-led CMB B-mode satellite experiment aiming for launch in the late 2020s, with a primary goal of detecting the imprint of primordial inflationary gravitational waves. Its current baseline focal-plane configuration includes 15 frequency bands between 40 and 402 GHz, fulfilling the mission requirements to detect the amplitude of gravitational waves with the total uncertainty on the tensor-to-scalar ratio, $\delta r$, down to $\delta r<0.001$. A key aspect of this performance is accurate astrophysical component separation, and the ability to remove polarized thermal dust emission is particularly important. In this paper we note that the CMB frequency spectrum falls off nearly exponentially above 300 GHz relative to the thermal dust SED, and a relatively minor high frequency extension can therefore result in even lower uncertainties and better model reconstructions. Specifically, we compare the baseline design with five extended configurations, while varying the underlying dust modeling, in each of which the HFT (High-Frequency Telescope) frequency range is shifted logarithmically towards higher frequencies, with an upper cutoff ranging between 400 and 600 GHz. In each case, we measure the tensor-to-scalar ratio $r$ uncertainty and bias using both parametric and minimum-variance component-separation algorithms. When the thermal dust sky model includes a spatially varying spectral index and temperature, we find that the statistical uncertainty on $r$ after foreground cleaning may be reduced by as much as 30--50 % by extending the upper limit of the frequency range from 400 to 600 GHz, with most of the improvement already gained at 500 GHz. We also note that a broader frequency range leads to better ability to discriminate between models through higher $\chi^2$ sensitivity. (abridged), Comment: 18 pages, 13 figures. Published in A&A

End-to-end simulations play a key role in the analysis of any high-sensitivity CMB experiment, providing high-fidelity systematic error propagation capabilities unmatched by any other means. In this paper, we address an important issue regarding such simulations, namely how to define the inputs in terms of sky model and instrument parameters. These may either be taken as a constrained realization derived from the data, or as a random realization independent from the data. We refer to these as Bayesian and frequentist simulations, respectively. We show that the two options lead to significantly different correlation structures, as frequentist simulations, contrary to Bayesian simulations, effectively include cosmic variance, but exclude realization-specific correlations from non-linear degeneracies. Consequently, they quantify fundamentally different types of uncertainties, and we argue that they therefore also have different and complementary scientific uses, even if this dichotomy is not absolute. Before BeyondPlanck, most pipelines have used a mix of constrained and random inputs, and used the same hybrid simulations for all applications, even though the statistical justification for this is not always evident. BeyondPlanck represents the first end-to-end CMB simulation framework that is able to generate both types of simulations, and these new capabilities have brought this topic to the forefront. The Bayesian BeyondPlanck simulations and their uses are described extensively in a suite of companion papers. In this paper we consider one important applications of the corresponding frequentist simulations, namely code validation. That is, we generate a set of 1-year LFI 30 GHz frequentist simulations with known inputs, and use these to validate the core low-level BeyondPlanck algorithms; gain estimation, correlated noise estimation, and mapmaking.

We present Planck LFI frequency sky maps derived within the BeyondPlanck framework. This framework draws samples from a global posterior distribution that includes instrumental, astrophysical and cosmological parameters, and the main product is an entire ensemble of frequency sky map samples. This ensemble allows for computationally convenient end-to-end propagation of low-level instrumental uncertainties into higher-level science products. We show that the two dominant sources of LFI instrumental systematic uncertainties are correlated noise and gain fluctuations, and the products presented here support - for the first time - full Bayesian error propagation for these effects at full angular resolution. We compare our posterior mean maps with traditional frequency maps delivered by the Planck collaboration, and find generally good agreement. The most important quality improvement is due to significantly lower calibration uncertainties in the new processing, as we find a fractional absolute calibration uncertainty at 70 GHz of $\delta g_{0}/g_{0} =5 \cdot 10^{-5}$, which is nominally 40 times smaller than that reported by Planck 2018. However, the original Planck 2018 estimate has a non-trivial statistical interpretation, and this further illustrates the advantage of the new framework in terms of producing self-consistent and well-defined error estimates of all involved quantities without the need of ad hoc uncertainty contributions. We describe how low-resolution data products, including dense pixel-pixel covariance matrices, may be produced directly from the posterior samples without the need for computationally expensive analytic calculations or simulations. We conclude that posterior-based frequency map sampling provides unique capabilities in terms of low-level systematics modelling and error propagation, and may play an important role for future CMB B-mode experiments. (Abridged.), Comment: 32 pages, 23 figures, data available from https://www.cosmoglobe.uio.no/

The Wide-Area Linear Optical Polarimeter (WALOP)-South instrument is an upcoming wide-field and high-accuracy optical polarimeter to be used as a survey instrument for carrying out the Polar-Areas Stellar Imaging in Polarization High Accuracy Experiment (PASIPHAE) program. Designed to operate as a one-shot four-channel and four-camera imaging polarimeter, it will have a field of view of $35\times 35$ arcminutes and will measure the Stokes parameters $I$, $q$, and $u$ in a single exposure in the SDSS-r broadband filter. The design goal for the instrument is to achieve an overall polarimetric measurement accuracy of 0.1 % over the entire field of view. We present here the complete polarimetric modeling of the instrument, characterizing the amount and sources of instrumental polarization. To accurately retrieve the real Stokes parameters of a source from the measured values, we have developed a calibration method for the instrument. Using this calibration method and simulated data, we demonstrate how to correct instrumental polarization and obtain 0.1 % accuracy in the degree of polarization, $p$. Additionally, we tested and validated the calibration method by implementing it on a table-top WALOP-like test-bed polarimeter in the laboratory., Comment: 34 pages, 24 figures. Accepted for publication in the Journal of Astronomical Telescopes, Instruments, and Systems

We present the first Bayesian method for tomographic decomposition of the plane-of-sky orientation of the magnetic field with the use of stellar polarimetry and distance. This standalone tomographic inversion method presents an important step forward in reconstructing the magnetized interstellar medium (ISM) in 3D within dusty regions. We develop a model in which the polarization signal from the magnetized and dusty ISM is described by thin layers at various distances. Our modeling makes it possible to infer the mean polarization (amplitude and orientation) induced by individual dusty clouds and to account for the turbulence-induced scatter in a generic way. We present a likelihood function that explicitly accounts for uncertainties in polarization and parallax. We develop a framework for reconstructing the magnetized ISM through the maximization of the log-likelihood using a nested sampling method. We test our Bayesian inversion method on mock data taking into account realistic uncertainties from Gaia and as expected for the optical polarization survey PASIPHAE according to the currently planned observing strategy. We demonstrate that our method is effective at recovering the cloud properties as soon as the polarization induced by a cloud to its background stars is higher than $\sim 0.1\%$ for the adopted survey exposure time and level of systematic uncertainty. Our method makes it possible to recover not only the mean polarization properties but also to characterize the intrinsic scatter, thus creating new ways to characterize ISM turbulence and the magnetic field strength. Finally, we apply our method to an existing data set of starlight polarization with known line-of-sight decomposition, demonstrating agreement with previous results and an improved quantification of uncertainties in cloud properties., Comment: Closely matches the published version: A&A 670, A164, 2023 The accompanying code (BISP-1) is available at https://github.com/vpelgrims/Bisp_1

The BeyondPlanck and Cosmoglobe collaborations have implemented the first integrated Bayesian end-to-end analysis pipeline for CMB experiments. The primary long-term motivation for this work is to develop a common analysis platform that supports efficient global joint analysis of complementary radio, microwave, and sub-millimeter experiments. A strict prerequisite for this to succeed is broad participation from the CMB community, and two foundational aspects of the program are therefore reproducibility and Open Science. In this paper, we discuss our efforts toward this aim. We also discuss measures toward facilitating easy code and data distribution, community-based code documentation, user-friendly compilation procedures, etc. This work represents the first publicly released end-to-end CMB analysis pipeline that includes raw data, source code, parameter files, and documentation. We argue that such a complete pipeline release should be a requirement for all major future and publicly-funded CMB experiments, noting that a full public release significantly increases data longevity by ensuring that the data quality can be improved whenever better processing techniques, complementary datasets, or more computing power become available, and thereby also taxpayers' value for money; providing only raw data and final products is not sufficient to guarantee full reproducibility in the future.

We present cosmological parameter constraints as estimated using the Bayesian BeyondPlanck (BP) analysis framework. This method supports seamless end-to-end error propagation from raw time-ordered data to final cosmological parameters. As a first demonstration of the method, we analyze time-ordered Planck LFI observations, combined with selected external data (WMAP 33-61GHz, Planck HFI DR4 353 and 857GHz, and Haslam 408MHz) in the form of pixelized maps which are used to break critical astrophysical degeneracies. Overall, all results are generally in good agreement with previously reported values from Planck 2018 and WMAP, with the largest relative difference for any parameter of about 1 sigma when considering only temperature multipoles between 29

We present the first application of the Cosmoglobe analysis framework by analyzing 9-year $\mathit{WMAP}$ time-ordered observations using similar machinery as BeyondPlanck utilizes for $\mathit{Planck}$ LFI. We analyze only the $\mathit Q$-band (41 GHz) data and report on the low-level analysis process from uncalibrated time-ordered data to calibrated maps. Most of the existing BeyondPlanck pipeline may be reused for $\mathit{WMAP}$ analysis with minimal changes to the existing codebase. The main modification is the implementation of the same preconditioned biconjugate gradient mapmaker used by the $\mathit{WMAP}$ team. Producing a single $\mathit{WMAP}$ $\mathit Q$1-band sample requires 22 CPU-hrs, which is slightly more than the cost of a $\mathit{Planck}$ 44 GHz sample of 17 CPU-hrs; this demonstrates that full end-to-end Bayesian processing of the $\mathit{WMAP}$ data is computationally feasible. In general, our recovered maps are very similar to the maps released by the $\mathit{WMAP}$ team, although with two notable differences. In temperature we find a $\sim2\,\mathrm{\mu K}$ quadrupole difference that most likely is caused by different gain modeling, while in polarization we find a distinct $2.5\,\mathrm{\mu K}$ signal that has been previously called poorly-measured modes by the $\mathit{WMAP}$ team. In the Cosmoglobe processing, this pattern arises from temperature-to-polarization leakage from the coupling between the CMB Solar dipole, transmission imbalance, and sidelobes. No traces of this pattern are found in either the frequency map or TOD residual map, suggesting that the current processing has succeeded in modelling these poorly measured modes within the assumed parametric model by using $\mathit{Planck}$ information to break the sky-synchronous degeneracies inherent in the $\mathit{WMAP}$ scanning strategy., Comment: 11 figures, submitted to A&A. Includes updated instrument model and changes addressing referee comments

We present the intensity foreground algorithms and model employed within the BeyondPlanck analysis framework. The BeyondPlanck analysis is aimed at integrating component separation and instrumental parameter sampling within a global framework, leading to complete end-to-end error propagation in the $Planck$ Low Frequency Instrument (LFI) data analysis. Given the scope of the BeyondPlanck analysis, a limited set of data is included in the component separation process, leading to foreground parameter degeneracies. In order to properly constrain the Galactic foreground parameters, we improve upon the previous $\texttt{Commander}$ component separation implementation by adding a suite of algorithmic techniques. These algorithms are designed to improve the stability and computational efficiency for weakly constrained posterior distributions. These are: 1) joint foreground spectral parameter and amplitude sampling, building on ideas from Miramare; 2) component-based monopole determination; 3) joint spectral parameter and monopole sampling; and 4) application of informative spatial priors for component amplitude maps. We find that the only spectral parameter with a significant signal-to-noise ratio using the current BeyondPlanck data set is the peak frequency of the anomalous microwave emission component, for which we find $\nu_{\mathrm{p}}=25.3\pm0.5$ GHz; all others must be constrained through external priors. Future works will be aimed at integrating many more data sets into this analysis, both map and time-ordered based, thereby gradually eliminating the currently observed degeneracies in a controlled manner with respect to both instrumental systematic effects and astrophysical degeneracies. When this happens, the simple LFI-oriented data model employed in the current work will need to be generalized to account for both a richer astrophysical model and additional instrumental effects., Comment: 27 pages, 23 figures, 3 tables, part 13 of the BeyondPlanck release. All BeyondPlanck products and software will be released publicly at http://beyondplanck.science. Paper version as accepted by A&A

We describe the BeyondPlanck project in terms of motivation, methodology and main products, and provide a guide to a set of companion papers that describe each result in fuller detail. We implement a complete end-to-end Bayesian analysis framework for the Planck LFI observations. The primary product is a full joint posterior distribution $P(\omega|d)$, where $\omega$ represents the set of all free instrumental, astrophysical, and cosmological parameters. Notable advantages of this approach are seamless end-to-end propagation of uncertainties; accurate modeling of both astrophysical and instrumental effects in the most natural basis for each uncertain quantity; optimized computational costs with little or no need for intermediate human interaction between various analysis steps; and a complete overview of the entire analysis process within one single framework. We focus in particular on low-$\ell$ CMB polarization reconstruction with Planck LFI. We identify several important new effects that have not been accounted for in previous pipelines, including gain over-smoothing and time-variable and non-$1/f$ correlated noise in the 30 and 44 GHz channels. We find that all results are consistent with the $\Lambda$CDM model, and we constrain the reionization optical depth to $\tau=0.066\pm0.013$, with a low-resolution $\chi^2$ probability-to-exceed of 32%. This uncertainty is about 30% larger than the official pipelines, arising from taking into account a more complete instrumental model. The marginal CMB Solar dipole amplitude is $3362.7\pm1.4\mu\mathrm{K}$, where the error bar is derived directly from the posterior distribution without the need of any ad-hoc instrumental corrections. We are currently not aware of any significant unmodelled systematic effects remaining in the Planck LFI data, and, for the first time, the 44 GHz channel is fully exploited. (Abridged.), Comment: 61 pages, 31 figures, submitted to A&A. Major revision: Previously reported unresolved effects are now understood and mitigated. This paper version concludes the BeyondPlanck project. All BeyondPlanck products and software are available at https://cosmoglobe.uio.no

Given a pseudoconvex hypersurface in C^n and an arbitrary weight, we show the existence of local coordinates in which the polynomial model contains a particularly simple sum of squares of monomials. Our second main result provides a normalization of a part of any Catlin boundary system. We illustrate by an example that this normalization cannot be extended to the rest of the boundary system due to the existence of what we refer to as torsion., Comment: 22 pages

LiteBIRD is a planned JAXA-led cosmic microwave background (CMB) B-mode satellite experiment aiming for launch in the late 2020s, with a primary goal of detecting the imprint of primordial inflationary gravitational waves. Its current baseline focal-plane configuration includes 15 frequency bands between 40 and 402 GHz, fulfilling the mission requirements to detect the amplitude of gravitational waves with the total uncertainty on the tensor-to-scalar ratio, δr, down to δr < 0.001. A key aspect of this performance is accurate astrophysical component separation, and the ability to remove polarized thermal dust emission is particularly important. In this paper we note that the CMB frequency spectrum falls off nearly exponentially above 300 GHz relative to the thermal dust spectral energy distribution, and a relatively minor high frequency extension can therefore result in even lower uncertainties and better model reconstructions. Specifically, we compared the baseline design with five extended configurations, while varying the underlying dust modeling, in each of which the High-Frequency Telescope (HFT) frequency range was shifted logarithmically toward higher frequencies, with an upper cutoff ranging between 400 and 600 GHz. In each case, we measured the tensor-to-scalar ratio r uncertainty and bias using both parametric and minimum-variance component-separation algorithms. When the thermal dust sky model includes a spatially varying spectral index and temperature, we find that the statistical uncertainty on r after foreground cleaning may be reduced by as much as 30–50% by extending the upper limit of the frequency range from 400 to 600 GHz, with most of the improvement already gained at 500 GHz. We also note that a broader frequency range leads to higher residuals when fitting an incorrect dust model, but also it is easier to discriminate between models through higher χ2 sensitivity. Even in the case in which the fitting procedure does not correspond to the underlying dust model in the sky, and when the highest frequency data cannot be modeled with sufficient fidelity and must be excluded from the analysis, the uncertainty on r increases by only about 5% for a 500 GHz configuration compared to the baseline.