Search

Oceans cover more than 70 percent of the Earth's surface making it difficult and costly to deploy modern seismological instruments here. The rapidly expanding global network of submarine telecom cables offers tremendous possibilities for seismological monitoring using laser light. Recent pioneer studies have demonstrated earthquake detection using lasers in onland and submarine fiber optic cables. However, permanent strain at the seafloor has never before been measured directly as it happens. With this aim, we deployed a dedicated 6-km-long fiber optic strain cable, offshore Catania Sicily, in 2000 m water depth, and connected it to a 29-km long electro-optical cable for science use. We report here that deformation of the cable equivalent to a total elongation of 2.5 cm was observed over a 21-month period (from Oct. 2020 to Jul. 2022). Brillouin laser reflectometry observations over the first 10 months indicate significant strain (+25 to +40 microstrain) at two locations where the cable crosses an active strike-slip fault on the seafloor, with most of the change occurring between 19 and 21 Nov. 2020. The cause of the strain could be fault slip or seabottom currents. During the following 11 months, the strain amplitude increased to +45 to +55 microstrain, affecting a longer portion of the cable up to 500 m to either side of the first fault crossing. A sandbag experiment performed on the distal portion of the cable (3.2–6.0 km) starting Sept. 2021 demonstrates how the fiber optic cable deforms in response to an applied load and how the deformation signal partially dissipates over time due to the elastic properties of the cable. These preliminary results are highly encouraging for the use of BOTDR (Brillouin Optical Time Domain Reflectometry) laser reflectometry as a technique to detect strain at the seafloor in near real time and to monitor the structural health of submarine cables.

Tectono-stratigraphic interpretation and sequential restoration modelling was performed over two high-resolution seismic profiles crossing the Western Ionian Basin of southern Italy. This analysis was undertaken in order to provide greater insights and a more reliable assessment of the deformation rate affecting the area. Offshore seismic profiling illuminates the sub-seafloor setting where a belt of active normal faults slice across the foot of the Malta Escarpment, a regional-scale structural boundary inherited from the Permo-Triassic palaeotectonic setting. A sequential restoration workflow was established to back-deform the entire investigated sector with the primary aim of analysing the deformation history of the three major normal faults affecting the area. Restoration of the tectono-stratigraphic model reveals how deformation rates evolved through time. In the early stage, the studied area experienced a significant deformation with the horizontal component prevailing over the vertical element. In this context, the three major faults contribute to only one third of the total deformation. The overall throw and extension then notably reduced through time towards the present day and, since the middle Pliocene, ongoing crustal deformation is accommodated almost entirely by the three major normal faults. Unloading and decompaction indicate that when compared to the unrestored seismic sections, a revision and a reduction of roughly one third of the vertical displacement of the faults offset is required. This analysis ultimately allows us to better understand the seismic potential of the region.

The Calabrian subduction zone is one of the narrowest arcs on Earth and a key area to understand the geodynamic evolution of the Mediterranean and other marginal seas. Here in the Ionian Sea, the African plate subducts beneath Eurasia. Imaging the boundary between the downgoing slab and the upper plate along the Calabrian subduction zone is important for assessing the potential of the subduction zone to generate mega‐thrust earthquakes and was the main objective of this study. Here we present and analyze the results from a 380 km long, wide‐angle seismic profile spanning the complete subduction zone, from the deep Ionian Basin and the accretionary wedge to NE Sicily, with additional constraints offered by 3‐D Gravity modeling and the analysis of earthquake hypocenters. The velocity model for the wide‐angle seismic profile images thin oceanic crust throughout the basin. The Calabrian backstop extends underneath the accretionary wedge to about 100 km SE of the coast. The seismic model was extended in depth using earthquake hypocenters. The combined results indicate that the slab dip increases abruptly from 2‐3° to 60‐70° over a distance of ≤50 km underneath the Calabrian backstop. This abrupt steepening is likely related to the roll‐back geodynamic evolution of the narrow Calabrian slab which shows great similarity to the shallow and deep geometry of the Gibraltar slab. Plain language abstract We investigate the deep crustal structure of southern Italy and the Central Mediterranean where some of the oldest oceanic crust on Earth is actively descending (subducting) into the earth's interior (Speranza et al., 2012). This process causes much of the moderate seismicity observed in this region and may be responsible for strong historical earthquakes as well (Gutscher et al., 2006). Deep seismic data recorded during a marine geophysical expedition performed in 2014, allow us to reconstruct the 3‐D geometry of this subduction zone. Our data reveal a 1‐4 km thick evaporitic (

Andrea Argnani in his comment on Dellong et al., 2020 (Geometry of the deep Calabrian subduction (Central Mediterranean Sea) from wide‐angle seismic data and 3D gravity modeling), proposes an alternate interpretation of the wide‐angle seismic velocity models presented by Dellong et al., 2018 and Dellong et al., 2020 and proposes a correction of the literature citations in these paper. In this reply, we discuss in detail all points raised by Andrea Argnani.

Laser reflectometry (BOTDR), commonly used for structural health monitoring (bridges, dams, etc.), for the first time is being tested to study movements of an active fault on the seafloor, 25 km offshore Catania Sicily (an urban area of 1 million people). Under ideal conditions, this technique can measure small strains (10E-6), across very large distances (10 - 200 km) and locate these strains with a spatial resolution of 10 - 50 m. As the first experiment of the European funded FOCUS project (ERC Advanced Grant), in late April 2020 we aimed to connect and deploy a dedicated 6-km long strain cable to the TSS (Test Site South) seafloor observatory in 2100 m water depth operated by INFN-LNS (Italian National Physics Institute). The work plan for the marine expedition FocusX1 onboard the research vessel PourquoiPas? is described here. First, microbathymetric mapping and a video camera survey are performed by the ROV Victor6000. Then, several intermediate junction frames and short connector cables (umbilicals) are connected. A cable-end module and 6-km long fiber-optic strain cable (manufactured by Nexans Norway) is then connected to the new junction box. Next, we use a deep-water cable-laying system with an integrated plow (updated Deep Sea Net design Ifremer, Toulon) to bury the cable 20 cm in the soft sediments in order to increase coupling between the cable and the seafloor. The targeted track for the cable crosses the North Alfeo Fault at three locations. Laser reflectometry measurements began April 2020 and will be calibrated by a three-year deployment of seafloor geodetic instruments (Canopus acoustic beacons manufactured by iXblue) also started April 2020, to quantify relative displacement across the fault. During a future marine expedition, tentatively scheduled for 2021 (FocusX2) a passive seismological experiment is planned to record regional seismicity. This will involve deployment of a temporary network of OBS (Ocean Bottom Seismometers) on the seafloor and