Search

This study describes the synthesis and characterization of the lead-free organic ferroelectric perovskite N-methyl-N'-diazabicyclo [2.2.2]octonium)-ammonium trichloride (MDABCO-NH4Cl3). The electrospinning technique was employed to obtain nanofibers embedded with this perovskite in a PVC polymer for hybrid fiber production. The dielectric, piezoelectric, and pyroelectric properties of these fibers were carefully examined. Based on measurements of the dielectric permittivity temperature and frequency dependence, together with the pyroelectric results, a transition from a high temperature paraelectric to a ferroelectric phase that persisted at room temperature was found to occur at 438 K. The measured pyroelectric coefficient yielded values as high as 290 μC K−1 m−2, which is in between the values reported for MDABCO-NH4I3 and the semiorganic ferroelectric triglycine sulfate (TGS). The hybrid nanofibers exhibited good morphological characteristics and demonstrated very good piezoelectric properties. Specifically, a piezoelectric coefficient of 42 pC/N was obtained when applying a periodical force of 3 N and a piezoelectric voltage coefficient of geff = 0.65 V mN−1. The performance of these fibers is on par with that of materials discussed in the existing literature for the fabrication of nano energy-harvesting generators. Importantly, the perovskite nanocrystals within the fibers are protected from degradation by the surrounding polymer, making them a promising environmentally friendly platform for flexible mechanical energy harvesting. [ABSTRACT FROM AUTHOR]

In this work, we introduce lead-free organic ferroelectric perovskite N-methyl-N′-diazabicyclo[2.2.2]octonium)–ammonium triiodide (MDABCO-NH4I3) nanocrystals embedded in three different polymer fibers fabricated by the electrospinning technique, as mechanical energy harvesters. Molecular ferroelectrics offer the advantage of structural diversity and tunability, easy fabrication, and mechanical flexibility. Organic–inorganic hybrid materials are new low-symmetry emerging materials that may be used as energy harvesters because of their piezoelectric or ferroelectric properties. Among these, ferroelectric metal-free perovskites are a class of recently discovered multifunctional materials. The doped nanofibers, which are very flexible and have a high Young modulus, behave as active piezoelectric energy harvesting sources that produce a piezoelectric voltage coefficient up to geff = 3.6 VmN−1 and show a blue intense luminescence band at 325 nm. In this work, the pyroelectric coefficient is reported for the MDABCO-NH4I3 perovskite inserted in electrospun fibers. At the ferroelectric–paraelectric phase transition, the embedded nanocrystals display a pyroelectric coefficient as high as 194 × 10−6 Cm−2k−1, within the same order of magnitude as that reported for the state-of-the-art bulk ferroelectric triglycine sulfate (TGS). The perovskite nanocrystals embedded into the polymer fibers remain stable in their piezoelectric output response, and no degradation is caused by oxidation, making the piezoelectric perovskite nanofibers suitable to be used as flexible energy harvesters. [ABSTRACT FROM AUTHOR]

N,N-dimethyl-4-nitroaniline is a piezoelectric organic superplastic and superelastic charge transfer molecular crystal that crystallizes in an acentric structure. Organic mechanical flexible crystals are of great importance as they stand between soft matter and inorganic crystals. Highly aligned poly-l-lactic acid polymer microfibers with embedded N,N-dimethyl-4-nitroaniline nanocrystals are fabricated using the electrospinning technique, and their piezoelectric and optical properties are explored as hybrid systems. The composite fibers display an extraordinarily high piezoelectric output response, where for a small stress of 5.0 × 103 Nm−2, an effective piezoelectric voltage coefficient of geff = 4.1 VmN−1 is obtained, which is one of the highest among piezoelectric polymers and organic lead perovskites. Mechanically, they exhibit an average increase of 67% in the Young modulus compared to polymer microfibers alone, reaching 55 MPa, while the tensile strength reaches 2.8 MPa. Furthermore, the fibers show solid-state blue fluorescence, important for emission applications, with a long lifetime decay (147 ns) lifetime decay. The present results show that nanocrystals from small organic molecules with luminescent, elastic and piezoelectric properties form a mechanically strong hybrid functional 2-dimensional array, promising for applications in energy harvesting through the piezoelectric effect and as solid-state blue emitters. [ABSTRACT FROM AUTHOR]

Three new compounds bearing furyl, aryl, or thienyl moieties linked to an imidazo-crown ether system (1, 2, and 3) were synthesized and fully characterized by elemental analysis, infrared, UV—vis absorption, and emission spectroscopy, X-ray crystal diffraction, and MALDI-TOF-MS spectrometry. The interaction toward metal ions (Ca2+, Cu2+, Ni2+, and Hg2+) and F- has been explored in solution by absorption and fluorescence spectroscopy. Mononuclear and binuclear metal complexes using Cu2+ or Hg2+ as metal centers have been synthesized and characterized. Compounds 2 and 3 show a noticeable enhancement of the fluorescence intensity in the presence of Ca2+ and Cu2+ ions. Moreover compound 3 presents a dual sensory detection way by modification of the fluorimetric and colorimetric properties in the presence of Cu2+ or Hg2+. EPR studies in frozen solution and in microcrystalline state of the dinuclear Cu(II)3 complex revealed the presence of an unique Cu2+ type. [ABSTRACT FROM AUTHOR]