Search

The current study focused on characterizing lean grade coal and carbonized biomass (at 400oC) for energy generation. Samples were pulverized using a ball mill and then mixed with a mechanical mixer at two mixing ratios. Proximate, ultimate and calorific value analyses were carried out on the samples using different ASTM standards and some available linear regression models. Lean grade coal has the highest ash content (79.58%) while raw biomass has the least (2.29%). Carbonized biomass samples have the highest heating value (9.49 MJ/kg). The O/C and H/C atomic ratios shows that carbonized biomass is the best fuel compared to coal and blended samples. The FTIR spectra of coal and blended samples shows peaks representing Si-O-Si while C-H bonds were the predominant ones in raw and carbonized samples. Lean grade coal and blended samples contain silicon as displayed by the EDX spectra. The coal and blended samples have grey-like silica and carbide microstructure. The coal and blended samples are not good for energy generation but may serve well as raw material for silicon recovery. Carbonized biomass has good fuel properties that can be useful in existing coal-fired plants. [ABSTRACT FROM AUTHOR]

Woody (Albizia pedicellaris and Terminalia ivorensis) and non-woody (guinea corn (Sorghum bicolor)) glume and stalk biomass resources from Nigeria were subjected to thermo-analytical and physico-chemical analyses to determine their suitability for thermochemical processing. They were found to have comparably high calorific values (between 16.4 and 20.1 MJ kg-1). The woody biomass had very low ash content (0.32%), while the non-woody biomass had relatively high ash content (7.54%). Thermogravimetric analysis (TGA) of the test samples showed significant variation in the decomposition behavior of the individual biomasses. Gas chromatography/mass spectrometry (GC/MS) of fatty acid methyl esters (FAMEs) derivatives indicated the presence of fatty and resin acids in the dichloromethane (CH2Cl2) extracts. Analytical pyrolysis (Py-GC/MS) of the samples revealed that the volatiles liberated consisted mostly of acids, alcohols, ketones, phenols, and sugar derivatives. These biomass types were deemed suitable for biofuel applications. [ABSTRACT FROM AUTHOR]

This study provides an extensive investigation on the kinetics, combustion characteristics, and thermodynamic parameters of the thermal degradation of guinea grass (Megathyrsus maximus) in N2-pyrolytic and oxidative atmospheres. A model-fitting technique and three different iso-conversional techniques were used to investigate the kinetics of the thermal process, after which an analysis of the combustion characteristics and thermodynamic parameters was undertaken. Prior to this, experiments on the physico-chemical characterization, thermogravimetric, and spectroscopic analyses were carried out to provide insight into the compositional structure of the guinea grass. The volatile matter, fixed carbon, and total lignin contents by mass were 73.0%, 16.1%, and 21.5%, respectively, while the higher heating value was 15.46 MJ/kg. The cellulose crystallinity index, determined by XRD, was 0.43. The conversion of the GG in air proceeded at a relatively much higher rate as the maximum mass-loss rate peak in a 20 K/min read was −23.1 and −12.3%/min for the oxidative and the pyrolytic, respectively. The kinetics investigation revealed three distinctive stages of decomposition with their corresponding values of activation energy. The average values of activation energy (FWO) at the latter stages of decomposition in the pyrolytic processes (165 kJ/mol) were higher than those in the oxidative processes (125 kJ/mol)—an indication of the distinctive phenomenon at this stage of the reaction. The Coats–Redfern kinetic model revealed that chemical reactions and diffusional models played a predominant role in the thermal decomposition process of the GG. This study showed that the thermodynamic parameters varied with the conversion ratio, and the combustion performance increased with the heating rates. The use of GG as an energy feedstock is recommended based on the findings from this work. [ABSTRACT FROM AUTHOR]