Search

Purpose: To evaluate the fracture strength of endodontically treated molars filled with different composite resins with vs without fiber reinforcement. Materials and Methods: A total of 60 intact mandibular molars were selected and endodontically treated. A standardized mesio-occlusal-distal cavity was prepared with cervical margins 1 mm above the cementoenamel junction and oral and buccal walls with 1.5-mm thickness. Universal adhesive was used in all specimens in etch-and-rinse mode. Specimens were divided into four groups (n = 15 each) according to restoration technique: group CSM = adhesive overlay with hybrid ceramic; group EXP = direct restoration with short fiber-reinforced composite; group ESU = direct restoration with nanohybrid composite; and group EST = direct restoration with nanohybrid composite reinforced with horizontal bidirectional glass fibers placed over the pulpal chamber floor. After 7 days of storage in water, samples were loaded until fracture using a universal testing machine. The maximum breaking loads were recorded in Newtons, and statistical analysis was then conducted with two-way ANOVA and post hoc Tukey test. Fragments were analyzed using scanning electron microscopy. Results: Mean fracture resistance values were: CSM = 1,428.91 ± 316.90 N; EXP = 1,874.57 ± 299.47 N; ESU = 1,557.44 ± 355.65 N; and EST = 1,870.27 ± 145.11 N. The CSM and EXP groups showed the highest strength values when compared to the other groups. The variable fiber insertion did not significantly alter the fracture resistance. The origin of the fracture was always located on the occlusal surface, mainly in the major contact loading area. Conclusion: The use of fiber-reinforced composite showed great improvement in fracture resistance, similar to a cuspal coverage restoration. However, only short fiber-reinforced composites showed a favorable fracture pattern. [ABSTRACT FROM AUTHOR]

Purpose: To evaluate the effect of three different curing protocols based on different ratios of self-curing and light-curing periods on the bond strength and nanoleakage of fiber posts luted with dual-curing selfadhesive cements. Materials and Methods: A total of 48 single-root teeth were endodontically treated and obturated, and an 8-mm post space was prepared with dedicated drills. Specimens were randomly divided into two groups according to the self-adhesive cement employed: group 1 (G1) = PANAVIA SA Plus (Kuraray Noritake), and group 2 (G2) = Bifix SE (VOCO). The specimens were further divided into three subgroups (n = 8 each) according to the light-curing protocol applied: no light-curing (SG1), 20 seconds of light-curing 20 seconds after cement injection (SG2), and 20 seconds of light-curing 120 seconds after cement injection (SG3). Slices of 1-mm thickness were prepared for the pushout test and nanoleakage analyses of the coronal and apical regions after 24 hours of storage in artificial saliva. Results were statistically analyzed with threeway ANOVA and Tukey post hoc tests. Statistical significance was set for P < .05. Results: Three-way ANOVA analysis showed that the factors of cement (P = .02) and curing protocol (P < .001) had a significant influence on bond strength. Tukey post hoc test reported that light-curing 120 seconds after injection showed higher bond strength compared to both no light-curing and photoactivation after 20 seconds. Conclusion: To achieve the highest bond strength with self-adhesive cements, photoactivation with a 120-second delay after mixing is required. There is no difference between light-curing immediately and light-curing 20 seconds after mixing. [ABSTRACT FROM AUTHOR]

The economic impact of Structural Health Monitoring Systems based on optical fibre sensors is assessed in the development of composite helicopter rotor blades. Hence, the focus of this analysis is on the helicopter's Beginning Of Life stage. Two applications of the Structural Health Monitoring System are considered in the development of composite blades: curing cycle development and accomplishment of laboratory and flight certification tests. Optical fibre sensors measure the temperature field during the curing cycle and strain field during the laboratory tests and allow load identification during the load survey activity. It was found that Structural Health Monitoring Systems can potentially lead to economic benefits during the development of the blade provide that a reduction in the number of curing cycles and number of blades tested is achieved as a consequence of the improvement of the temperature and strain field quality. Moreover, an economic benefit could be achieved during the load survey activity, needed to complete the certification of the composite blade, avoiding the periodical maintenance of the applied strain gauges acquiring the strains during the flight. [ABSTRACT FROM AUTHOR]

Aquaculture and waste valorization have the potential to show solid achievements toward food security and improvements in the circularity of resources, which are crucial aspects of achieving a sustainable lifestyle in agreeance with Agenda 2030 goals. This study aims to optimize and simplify the decision-making processes for the valorization of marine wastes (natural and from aquaculture) as secondary raw materials to produce high-value-added market goods. However, significant concentrations of pollutants may be present within wastes, compromising overall quality, and social dynamics can hinder their usage further. Goro's lagoon was chosen as a case study, where the relations between the ecosystem services, a thriving bivalve economy, and social dynamics are deeply rooted and intertwined. Therefore, in the manuscript cost–benefit and foresight analyses are conducted to determine the best usage for algal biomass considering pollution, social acceptance, and profitability. These analyses are virtually conducted on bio-refineries that could be operating in the case study's area: briefly, for a thirty-year running bio-plant, the CBA indicates the two best alternatives with an income of 5 billion euros (NPV, with a 5% discount rate) for a biofuel-only production facility, and a half for a multiproduct one, leading to the conclusion that the first is the best alternative. The foresight, instead, suggests a more cautious approach by considering external factors such as the environment and local inhabitants. Hence, the main innovation of this work consists of the decision-maker's holistic enlightenment toward the complexities and the hidden threats bound to this kind of closed-loop efficiency-boosting process, which eventually leads to optimized decision-making processes. [ABSTRACT FROM AUTHOR]

Monitoring the integrity of aeronautical structures is fundamental for safety. Structural Health Monitoring Systems (SHMSs) perform real-time monitoring functions, but their performance must be carefully assessed. This is typically done by introducing artificial damages to the components; however, such a procedure requires the production and testing of a large number of structural elements. In this work, the damage detection performance of a strain-based SHMS was evaluated on a composite helicopter rotor blade root, exploiting a Finite Element (FE) model of the component. The SHMS monitored the bonding between the central core and the surrounding antitorsional layer. A damage detection algorithm was trained through FE analyses. The effects of the load's variability and of the damage were decoupled by including a load recognition step in the algorithm, which was accomplished either with an Artificial Neural Network (ANN) or a calibration matrix. Anomaly detection, damage assessment, and localization were performed by using an ANN. The results showed a higher load identification and anomaly detection accuracy using an ANN for the load recognition, and the load set was recognized with a satisfactory accuracy, even in damaged blades. This case study was focused on a real-world subcomponent with complex geometrical features and realistic load conditions, which was not investigated in the literature and provided a promising approach to estimate the performance of a strain-based SHMS. [ABSTRACT FROM AUTHOR]

Aim: To investigate the bidirectional influence between periodontitis and psoriasis, using the respective experimental models of ligature‐ and imiquimod‐induced diseases on murine models. Materials and Methods: Thirty‐two C57/BL6J mice were randomly allocated to four experimental groups: control (P− Pso−), ligature‐induced periodontitis (P+ Pso−), imiquimod‐induced psoriasis (P− Pso+) and periodontitis and psoriasis (P+ Pso+). Samples (maxilla, dorsal skin and blood) were harvested immediately after death. Measures of periodontitis (distance between the cemento‐enamel junction and alveolar bone crest [CEJ–ABC] and the number of osteoclasts) and psoriasis (epidermal thickness and infiltrate cell [/0.03mm2]) severity as well as systemic inflammation (IL‐6, IL‐17A, TNF‐α) were collected. Results: The P+ Pso+ group exhibited the most severe experimental periodontitis and psoriasis, with the highest values of CEJ–ABC, number of osteoclasts, epidermal thickness and infiltrate cells in the dorsal skin, as well as the highest blood cytokine concentration. The P+ Pso− group presented with higher cell infiltrate (/0.03mm2) compared to the control group (p <.05), while the P− Pso+ group showed substantially higher alveolar bone loss (CEJ–ABC) than the control group (p <.05). Conclusions: Experimental periodontitis may initiate and maintain psoriasiform skin inflammation and, vice versa, experimental psoriasis may contribute to the onset of periodontitis. In a combined model of the diseases, we propose a bidirectional association between periodontitis and psoriasis via systemic inflammation. [ABSTRACT FROM AUTHOR]

Purpose: To retrospectively evaluate the clinical behavior of direct anterior composite restorations performed with a universal adhesive or with a three-step etch-and-rinse (E&R) adhesive. Material and Methods: Patients were randomly treated with a three-step E&R adhesive (Optibond FL, Kerr) or a universal adhesive (Clearfil Universal Bond Quick, Kuraray Noritake) applied in E&R mode. All restorations were performed with a nanohybrid composite (ClearFil Majesty ES-2, Kuraray Noritake) by the same experienced operator. Two calibrated examiners evaluated the restorations using a dental mirror and explorer, in accordance with modified United States Public Health Service (USPHS) procedures. Clinical events were registered and classified as either failure (F), survival (SR), or success (S). Results: 168 restorations were evaluated in 90 patients with an average follow-up period of 37.9 (± 22.9) months. A total of 132 restorations were performed on vital teeth, and 36 were performed on endodontically treated teeth (ETT). A total of 128 Class-IV and 40 Class-III restorations were performed. In 89 restorations, a three-step E&R adhesive was applied (14 Class-III and 75 Class-IV), while in 79, a universal adhesive was used (26 Class-III and 53 Class-IV, p = 0.0091). A Cox regression analysis was performed (p < 0.05) to analyze which factors were involved in the failure of the restorations, considering failure (F) as restorations that needed re-intervention at the follow-up period of 37.9 (± 22.9) months. No statistically significant differences were observed when considering parameters directly involved with the adhesives tested. Endodontically treated teeth were more prone to fractures (p = 0.0006) compared to vital teeth. Restorations made with universal adhesives failed by fracturing significantly more frequently (p = 0.0234), while restorations made on endodontically treated teeth had a significantly worse outcome (p = 0.0001). Restorations made on canines also failed significantly more frequently (HR = 3.8, 95% CI = 1.4-10.1, p = 0.0062). Conclusions: Based on the obtained results, both the universal adhesive and the three-step E&R adhesive proved to be good treatment choices for direct anterior restorations after 37.9 (± 22.9) months of follow-up. Tooth vitality seems fundamental for the prognosis of a direct anterior composite restoration over time. [ABSTRACT FROM AUTHOR]

Purpose: To evaluate the effect of different pretreatment protocols and adhesives on the shear bond strength and surface morphology of aprismatic enamel. Materials and Methods: Human maxillary incisors (N = 120) were assigned to five different groups according to pretreatment: 1) no treatment; 2) glycine; 3) sodium bicarbonate; 4) Al2O3 and 5) extra-fine bur. Then the teeth were divided into three subgroups, according to the adhesive applied: 3-step etch-and-rinse adhesive (ER), universal adhesive in ER mode, and universal adhesive in self-etch (SE) mode. Shear bond strength (SBS) testing was performed with a universal testing machine. For SEM observation, fifteen human molars were collected and analyzed after pretreatment with/without etching with 37% H3PO4 for 30s. Results: Al2O3 showed higher SBS than all other groups considered. Comparable SBS was obtained for other pretreatments. Universal adhesive in E&R mode performed better than did 3-step E&R and universal adhesive in SE mode. SEM images showed visible differences in enamel surface roughness. Conclusions: Airborne-particle abrasion with Al2O3 followed by etching with H3PO4 increased SBS on aprismatic enamel. The combination of airborne-particle abrasion with alumina powder followed by 15 s of H3PO4 etching and application of a universal adhesive in E&R mode proved to be the most effective adhesive protocol. [ABSTRACT FROM AUTHOR]

Purpose: To three-dimensionally evaluate the interfacial gap of bulk-fill resin composites applied in deep Class-I restorations with different layering techniques and curing modes. Materials and Methods: Ninety-six (n = 96) samples were prepared with standardized deep Class-I cavities and adhesive procedures. Four materials were tested: SDR (SDR), SonicFill2 (SF), Admira Fusion X-Tra (AFXT), Filtek Supreme XTE (FS). Four subgroups (n = 6) were created according to layering and curing techniques: 2+2mm increments with soft start curing (SG1), 2+2 mm with conventional curing (SG2), a 4-mm increment with soft start curing (SG3), a 4-mm increment with conventional curing (SG4). All samples underwent micro-CT scans; afterwards, voids surrounding the restorations automatically underwent a thresholding procedure (Mimics, Materialise; Geomagic Studio 12, 3D Systems) to analyze the 3D interfacial gap. Statistical analysis was performed using three-way ANOVA with Tukey’s test (significance p < 0.05). Results: Statistically significant differences were reported between materials, layering techniques and their interaction. No statistically significant differences were reported for polymerisation mode. Bulk-fill materials showed average interfacial gap volumes ranging from 0.031 mm³ to 0.200 mm³, while FS showed volumes ranging from 0.416 mm³ to 1200 mm³. Conclusions: All bulk-fill materials performed statistically significantly better than did FS (p < 0.05), with no statistically significant differences between them. Curing mode did not influence interfacial gap volume in any group (p > 0.05), while bulk-filling vs layering influenced the volume of interfacial gaps only in the FS group, which performied better when incrementally applied. Regarding gap localisation, the floor of the cavity was the area with the highest likelihood of gaps in all samples. [ABSTRACT FROM AUTHOR]