Search

Rehman M, Ihsan A, Madni A, et al. Int J Nanomedicine. 2021;16:5187. The authors have advised Figure 3 on page 5187 is incorrect. An error was made in the labelling of the scale bar for figure part 3B. The correct Figure 3 is shown in Download Article. The authors apologize for this error. Read the original articlePrevious corrigendum has been published

Mubashar Rehman,1–3 Ayesha Ihsan,2 Asadullah Madni,1 Sadia Zafar Bajwa,2 Di Shi,3 Thomas J Webster,3,4 Waheed S Khan2 1Department of Pharmacy, The Islamia University of Bahawalpur, Bahawalpur, Punjab, Pakistan; 2Nanobiotech Group, National Institute of Biotechnology and Genetic Engineering, Faisalabad, Punjab, Pakistan; 3Department of Chemical Engineering, Northeastern University, Boston, MA, USA; 4Center of Excellence for Advanced Materials Research, King Abdulaziz University, Jeddah, Saudi Arabia Abstract: Thermoresponsive drug delivery systems are designed for the controlled and targeted release of therapeutic payload. These systems exploit hyperthermic tempera­tures (>39°C), which may be applied by some external means or due to an encountered symptom in inflammatory diseases such as cancer and arthritis. The objective of this paper was to provide some solid evidence in support of the hypothesis that solid lipid nanoparticles (SLNs) can be used for thermoresponsive targeting by undergoing solid–liquid phase transition at their melting point (MP). Thermoresponsive lipid mixtures were prepared by mixing solid and liquid natural fatty acids, and their MP was measured by differential scanning calorimetry (DSC). SLNs (MP 39°C) containing 5-fluorouracil (5-FU) were synthesized by hot melt encapsulation method, and were found to have spherical shape (transmission electron microscopy studies), desirable size (90% drug was released at 39°C after 5 hours, suggesting that the SLNs show thermoresponsive drug release, thus confirming our hypothesis. Drug release from SLNs at 39°C was similar to oleic acid and linoleic acid nanoemulsions used in this study, which further confirmed that thermoresponsive drug release is due to solid–liquid phase transition. Next, a differential pulse voltammetry-based electrochemical chemical detection method was developed for quick and real-time analysis of 5-FU release, which also confirmed thermoresponsive drug release behavior of SLNs. Blank SLNs were found to be biocompatible with human gingival fibroblast cells, although 5-FU-loaded SLNs showed some cytotoxicity after 24 hours. 5-FU-loaded SLNs showed thermoresponsive cytotoxicity to breast cancer cells (MDA-MB-231) as cytotoxicity was higher at 39°C (cell viability 72%–78%) compared to 37°C (cell viability >90%) within 1 hour. In conclusion, this study presents SLNs as a safe, simple, and effective platform for thermoresponsive targeting. Keywords: temperature sensitive, breast cancer, 5-fluorouracil, nanostructured lipid carriers, emulsions, fatty acids

Farooq Aziz,1,2 Ayesha Ihsan,1 Aalia Nazir,2 Ishaq Ahmad,3 Sadia Zafar Bajwa,1 Asma Rehman,1 Abdoulaye Diallo,4 Waheed S Khan1 1Nanobiotechnology Group, National Institute for Biotechnology and Genetic Engineering (NIBGE), Faisalabad, 2Department of Physics, Islamia University of Bahawalpur, Bahawalpur, 3National Center for Physics, Quaid-I-Azam University, Islamabad, Pakistan; 4Laboratory of Photonics and Nano-Fabrication, Faculty of Science and Technology, Cheikh Anta Diop University of Dakar (UCAD), Dakar-Fann Dakar, Senegal Abstract: Gold nanoparticles (GNPs) with dimension in the range of 1–100 nm have a prominent role in a number of biomedical applications like imaging, drug delivery, and cancer therapy owing to their unique optical features and biocompatibility. In this work, we report a novel technique for the synthesis of two types of GNPs namely porous gold nanoparticles (PGNPs) and solid gold nanoparticles (SGNPs). PGNPs of size 35 nm were fabricated by reduction of gold (III) solution with lecithin followed by addition of L-ascorbic acid and tri-sodium citrate, whereas SGNPs with a dimension of 28 nm were prepared by reflux method using lecithin as a single reducing agent. Comparative studies using PGNPs (λmax 560 nm) and SGNPs (λmax 548 nm) were conducted for evaluating their use as a contrast agent. These studies reveled that in direct computed tomography scan, PGNPs exhibited brighter contrast (45 HU) than SGNPs (26 HU). To investigate the effect of PGNPs and SGNPs on the liver and kidney profile, male rabbits were intravenously injected with an equal dose of 1 mg/kg weight of PGNPs and SGNPs. The effect on biochemical parameters was evaluated 72 hours after intravenous (IV) injection including liver function profile, renal (kidney) function biomarker, random blood glucose value, and cholesterol level. During one comparison of contrast in CT scan, PGNPs showed significantly enhanced contrast in whole-rabbit and organ CT scan as compared to SGNPs 6 hours after injection. Our findings suggested that the novel PGNPs enhance CT scan image with higher efficacy as compared to SGNPs. The results showed that IV administration of synthesized PGNPs increases the levels of aspartate aminotransferase (AST), alkaline phosphate (ALP), serum creatinine, and blood glucose, whereas that of SGNPs increases the levels of AST, ALP, and blood glucose. Keywords: porous gold nanoparticles, solid gold nanoparticles, CT scan, contrast agent, liver function test, renal function test

Mubashar Rehman,1 Asadullah Madni,1 Ayesha Ihsan,2 Waheed Samraiz Khan,2 Muhammad Imran Khan,1 Muhammad Ahmad Mahmood,1 Muhammad Ashfaq,1 Sadia Zafar Bajwa,2 Imran Shakir31Department of Pharmacy, Faculty of Pharmacy and Alternative Medicine, The Islamia University of Bahawalpur, Pakistan; 2Nanobiotechnology Group, Industrial Biotechnology Division, National Institute of Biotechnology and Genetic Engineering, Faisalabad, Pakistan; 3Sustainable Energy Technologies (SET) centre, College of Engineering, King Saud University, Riyadh, Saudi ArabiaAbstract: Binary fatty acid mixture-based solid lipid nanoparticles (SLNs) were prepared for delivery of diacerein, a novel disease-modifying osteoarthritis drug, with and without simultaneously loaded gold nanoparticles (GNPs). In order to optimize SLNs for temperature-responsive release, lipid mixtures were prepared using different ratios of solid (stearic acid or lauric acid) and liquid (oleic acid) fatty acids. SLNs were prepared by microemulsification (53 nm), hot melt encapsulation (10.4 nm), and a solvent emulsification-evaporation technique (7.8 nm). The physicochemical characteristics of SLNs were studied by Zetasizer, Fourier transform infrared, and X-ray diffraction analysis. High encapsulation of diacerein was achieved with diacerein-loaded and simultaneously GNP-diacerein-loaded SLNs. In vitro dissolution studies revealed a sustained release pattern for diacerein over 72 hours for diacerein-loaded SLNs and 12 hours for GNP-diacerein-loaded SLNs. An increase in diacerein payload increased the release time of diacerein while GNPs decreased it. In addition, rapid release of diacerein over 4 hours was observed at 40°C (melting point of optimized fatty acid mixture), demonstrating that these binary SLNs could be used for thermoresponsive drug delivery. Kinetic modeling indicated that drug release followed zero order and Higuchi diffusion models (R2>0.9), while the Korsmeyer-Peppas model predicted a diffusion release mechanism (n

Dydrogesterone, a frequently prescribed synthetic hormone integral to the treatment of diverse gynecological conditions, necessitates precise quantification in complex human plasma. In this study, the development of a portable, smartphone-based electrochemical sensor employing screen-printed gold electrodes (SPAuEs) modified with a biomimetic, molecularly imprinted poly(methacrylic acid- co -methyl methacrylate) (MIP) is presented for dydrogesterone detection in human plasma. FTIR spectroscopy illustrates the transformation of a pre-polymer mixture into a polymerized matrix, while SEM reveals a uniform MIP/SPAuE surface morphology. The sensor fabrication protocol, encompassing MIP/SPAuE composition, polymerization solvent, incubation time, and scan rate, is optimized to achieve enhanced sensitivity. The MIP/SPAuEs sensor exhibits a linear sensor response to dydrogesterone within the concentration range of 1-500 nM, as evidenced by cyclic and differential pulse voltammetry. The MIP/SPAuE sensor demonstrates exceptional sensitivity, recording 8.2 × 10 -3 μA nM -1 , with a sub-nanomolar limit of detection (LOD = 370 pM), and low limit of quantification (LOQ = 1.12 nM), along with appreciable selectivity over common interferents. In real-world clinical applications, the designed sensor is effectively employed for the rapid and precise determination of dydrogesterone in human blood plasma, achieving a remarkable recovery of 81%. Furthermore, MIP/SPAuE coatings possess suitable stability over 15 days, indicating the robustness of the sensor material for multiple rounds of analysis. The developed sensor provides a sensitive, selective, and cost-effective solution for monitoring dydrogesterone in plasma during various gynecological disorders, allowing for personalized healthcare applications.

Creatinine, a byproduct of muscle metabolism, is typically filtered by the kidneys. Deviations from normal concentrations of creatinine in human saliva serve as a crucial biomarker for renal diseases. Monitoring these levels becomes particularly essential for individuals undergoing dialysis and those with kidney conditions. This study introduces an innovative disposable point-of-care (PoC) sensor device designed for the prompt detection and continuous monitoring of trace amounts of creatinine. The sensor employs a unique design, featuring a creatinine-imprinted polythiophene matrix combined with niobium oxide nanoparticles. These components are coated onto a screen-printed working electrode. Thorough assessments of creatinine concentrations, spanning from 0 to 1000 nM in a redox solution at pH 7.4 and room temperature, are conducted using cyclic voltammetry (CV), differential pulse voltammetry (DPV), and electrochemical impedance spectroscopy (EIS). The devised sensor exhibits a sensitivity of 4.614 μA cm -2 nM -1 , an impressive trace level limit of detection at 34 pM, and remarkable selectivity for creatinine compared to other analytes found in human saliva, such as glucose, glutamine, urea, tyrosine, etc. Real saliva samples subjected to the sensor reveal a 100% recovery rate. This sensor, characterized by its high sensitivity, cost-effectiveness, selectivity, and reproducibility, holds significant promise for real-time applications in monitoring creatinine levels in individuals with kidney and muscle-related illnesses., Competing Interests: The authors declare no competing financial interests., (This journal is © The Royal Society of Chemistry.)

Emerging antibiotic resistant bacteria constitute one of the biggest threats to public health. Surface-enhanced Raman scattering (SERS) is highly promising for detecting such bacteria and for antibiotic susceptibility testing (AST). SERS is fast, non-destructive (can probe living cells) and it is technologically flexible (readily integrated with robotics and machine learning algorithms). However, in order to integrate into efficient point-of-care (PoC) devices and to effectively replace the current culture-based methods, it needs to overcome the challenges of reliability, cost and complexity. Recently, significant progress has been made with the emergence of both new questions and new promising directions of research and technological development. This article brings together insights from several representative SERS-based AST studies and approaches oriented towards clinical PoC biosensing. It aims to serve as a reference source that can guide progress towards PoC routines for identifying antibiotic resistant pathogens. In turn, such identification would help to trace the origin of sporadic infections, in order to prevent outbreaks and to design effective medical treatment and preventive procedures., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier B.V. All rights reserved.)

We report the synthesis of a novel electrochemical biosensor comprising of cupric oxide (CuO) nanoparticles (NPs) mediated poly(hydroxybutyrate) (PHB) composite film with polyvinyl alcohol (PVA) as a binder/template support using the solution casting method for the detection of a biomolecule i.e., ascorbic acid (AA). The specimens were characterized for surface, chemical, mechanical, optical, and electrochemical attributes. The results expressed regular mediation of CuO NPs in the PHB/PVA matrix towards nanobiocomposite formation with enhanced crystallinity, inter-molecular interactions, mechanical, and electrochemical attributes, and decreased hydrophilicity and bandgap, thus being useful in potential optoelectronic devices. The synthesized biocomposite film exhibited a tensile strength of 86.24 ± 4.10 N which might be due to reinforcement/uniform dispersion of the CuO nanofiller in the PHB-based matrix. The PHB/CuO composite, then, deposited on a glassy carbon electrode surface exhibited good electrocatalytic activity towards the AA in the aqueous media even at low analyte concentrations. Such modified electrode surfaces with metal/biopolymer complex could find possible applications in the detection of other bioactive molecules., (Copyright © 2022 Elsevier B.V. All rights reserved.)

Cotton production is seriously affected by the prevalent cotton leaf curl disease (CLCuD) that originated from Nigeria (Africa) to various parts of Asia including Pakistan, India, China and Philippines. Due to CLCuD, Pakistan suffers heavy losses approximately 2 billion USD per annum. Numerous reports showed that CLCuD is associated with multiple species of begomoviruses, alphasatellites and a single species of betasatellite, that is 'Cotton leaf curl Multan betasatellite' (CLCuMuB). The most prevalent form of CLCuD is the combination of 'Cotton leaf curl Kokhran virus'-Burewala strain (CLCuKoV-Bur) and CLCuMuB. Thus, the availability of an in-field assay for the timely detection of CLCuD is important for the control and management of the disease. In this study, a robust method using the loop-mediated isothermal amplification (LAMP) assay was developed for the detection of CLCuD. Multiple sets of six primers were designed based on the conserved regions of CLCuKoV-Bur and CLCuMuB-βC1 genes. The results showed that the primer set targeting the CLCuMuB-βC1 gene performed best when the LAMP assay was performed at 58°C using 100 ng of total plant tissue DNA as a template in a 25 µl reaction volume. The limit of detection for the assay was as low as 22 copies of total purified DNA template per reaction. This assay was further adapted to perform as a colorimetric and real-time LAMP assay which proved to be advantageously applied for the rapid and early point-of-care detection of CLCuD in the field. Application of the assay could help to prevent the huge economic losses caused by the disease and contribute to the socio-economic development of underdeveloped countries., (© The Author(s) 2021. Published by Oxford University Press.)

The emergence of bacterial resistance to currently available antibiotics emphasized the urgent need for new antibacterial agents. Nanotechnology-based approaches are substantially contributing to the development of effective and better-formulated antibiotics. Here, we report the synthesis of stable manganese oxide nanostructures (MnO NS) by a facile, one-step, microwave-assisted method. Asprepared MnO NS were thoroughly characterized by atomic force microscopy (AFM), field emission scanning electron microscopy (FESEM), dynamic light scattering (DLS), UV-Visible spectroscopy and X-ray powder diffraction (XRD). UV-Visible spectra give a sharp absorption peak at a maximum wavelength of 430 nm showed surface plasmon resonance (SPR). X-ray diffraction (XRD) profile demonstrated pure phase and crystalline nature of nanostructures. Morphological investigations by a scanning electron microscope showed good dispersity with spherical particles possessing a size range between 10-100 nm. Atomic force microscope data exhibited that the average size of MnO NS can be controlled between 25 nm to 150 nm by a three-fold increment in the amount of stabilizer (o-phenylenediamine). Antimicrobial activity of MnO NS on both gram-positive ( Bacillus subtilis ) and gram-negative ( Escherichia coli ) bacterial strains showed that prepared nanostructures were effective against microorganisms. Further, this antibacterial activity was found to be dependent on nanoparticles (NPs) size and bacterial species. These were more effective against Bacillus subtilis ( B. subtilis ) as compared to Escherichia coli ( E. coli ). Considering the results together, this study paves the way for the formulation of similar nanostructures as effective antibiotics to kill other pathogens by a more biocompatible platform. This is the first report to synthesize the MnO NS by green approach and its antibacterial application.

Monitoring antimalarial drugs is necessary for clinical assays, human health, and routine quality control practices in pharmaceutical industries. Herein, we present the development of sensor coatings based on molecularly imprinted polymers (MIPs) combined with quartz crystal microbalance (QCM) for sensitive and selective gravimetric detection of an antimalarial drug: artemether. The MIP coatings are synthesized by using artemether as the template in a poly(methacrylic acid- co -ethylene glycol dimethacrylate) matrix. Artemether-MIP and the non-imprinted polymer (NIP) control or reference layers are deposited on 10 MHz dual-electrode QCM by spin coating (187 ± 9 nm layer thickness after optimization). The coatings are characterized by FTIR spectroscopy and atomic force microscopy that reveal marked differences among the MIP and NIP. The MIP-QCM sensor exhibits high sensitivity (0.51 Hz ppm -1 ) with sub-10 ppm detection and quantification limits. The MIP-QCM sensor also exhibits a 6-fold higher sensitivity compared to the NIP-QCM, and a dynamic working range of 30-100 ppm. The response time of MIP-QCM devices for a single cycle of analyte adsorption, signal saturation, and MIP regeneration is less than 2.5 min. The sensor also demonstrates selectivity factors of artemether-MIP of 2.2 and 4.1 compared to artemisinin and lumefantrine, respectively. Reversibility tests reveal less than 5% variation in sensor responses over three cycles of measurements at each tested concentration. The MIP-QCM showed lower detection limits than conventional HPLC-UV, and faster response time compared to HPLC-UV and liquid chromatography-mass spectrometry (LC-MS)., Competing Interests: The authors declare no conflict of interest., (This journal is © The Royal Society of Chemistry.)

Chemodynamic therapy (CDT) takes the advantages of Fenton-type reactions triggered by endogenous chemical energy to generate highly cytotoxic hydroxyl radicals. As a novel modality for cancer treatment, CDT shows minimal invasiveness and high tumor specificity by responding to the acidic and the highly concentrated hydrogen peroxide microenvironment of tumor. The CDT approach for spatiotemporal controllable reactive oxygen species generation exhibits preferable therapeutic performance and satisfying biosafety. In this review article, we summarized the recent advances of stimuli-activatable nanomedicines for CDT. We also overviewed the strategies for augmenting CDT performance, including increasing the catalytic efficacy through rational design of the nanomaterials, modulating the reaction condition, inputting external energy field, and regulating the tumor microenvironment. Furthermore, we discussed the potential and challenges of stimuli-activatable nanomedicine for clinical translation and future development of CDT. This article is categorized under: Therapeutic Approaches and Drug Discovery > Nanomedicine for Oncologic Disease Nanotechnology Approaches to Biology > Nanoscale Systems in Biology Diagnostic Tools > In Vivo Nanodiagnostics and Imaging., (© 2020 Wiley Periodicals, Inc.)

It is necessary to study the possible interactions among various chemical surfaces and analytes before applying them to biological systems. We report the synthesis of carbon nanotubes-iron oxide (SPIONs-CNT) nanocomposite material by using lecithin stabilized superparamagnetic iron oxide nanoparticles (SPIONs) obtained by facile hydrothermal technique. Various characterizations of the obtained nanocomposite were carried out and electrochemical studies were performed further to study the interaction capabilities of the nanocomposite with anti-TB drug Rifampicin. Obtained results by cyclic voltammetric studies of SPIONs-CNT nanocomposite with limit of detection (LOD) of 1.178 μ M showed the enhanced electrochemical sensitivity and selectivity of anti-tuberculosis (anti-TB) drug Rifampicin (RIF).

Combining nanomaterials in varying morphology and functionalities gives rise to a new class of composite materials leading to innovative applications. In this study, we designed a heterostructured hybrid material consisting of two-dimensional bismuth nanosheets augmented by molecularly imprinted networks. Antibiotic overuse is now one of the main concerns in health management, and their monitoring is highly desirable but challenging. So, for this purpose, the resulting composite interface was used as a transducer for quartz crystal microbalances. The main objective was to develop highly selective mass-sensitive sensor for chloramphenicol. Morphological investigation revealed the presence of ultrathin, square shaped nanosheets, 2-3 nm in height and further supplemented by imprinted polymers. Sensor responses are described as the decrease in the frequency of microbalances owing to chloramphenicol re-binding in the templated cavities, yielding a detection limit down to 0.74 μM. This sensor demonstrated a 100 % specific detection of chloramphenicol over its interfering and structural analogs (clindamycin, thiamphenicol, and florfenicol). This composite interface offers the advantage of selective binding and excellent sensitivity due to special heterostructured morphology, in addition to benefits of robustness and online monitoring. The results suggest that such composite-based sensors can be favorable platforms, especially for commercial prospects, to obtain selective detection of other biomolecules of clinical importance., Competing Interests: Declaration of Competing Interest There are no competing financial interests declared by the authors., (Copyright © 2020 Elsevier B.V. All rights reserved.)

The emerging biomedical applications of selenium nanoparticles (SeNPs) require facile and efficient strategy to assess its interactions with cell membrane. In this study, an efficient and reproducible microwave assisted method was used to synthesize SeNPs with controllable size distributions. The physical properties of the emergent structures, such as morphology, structure, and size were studied. The antimicrobial applications of SeNPs were assessed by electrochemical analyses that entailed the systematic acquisition of cyclic voltammetry data. Our results demonstrate a straightforward method to predict the integrity of bacterial cell membranes following the administration of SeNP treatments.

The fascinating properties of graphene can be augmented with other nanomaterials to generate hybrids to design innovative applications. Contrary to the conventional methodologies, we showed a novel yet simple, in-situ, biological approach which allowed for the effective growth of gold nanostructures on graphene surfaces (3D Au NS@GO). The morphology of the obtained hybrid consisted of sheets of graphene, anchoring uniform dispersion of ultra-small gold nanostructures of about 2-8 nm diameter. Surface plasmon resonance at 380 nm confirmed the nano-regimen of the hybrid. Fourier transform infrared spectroscopy indicated the utilization of amine spacers to host gold ions leading to nucleation and growth. The exceptional positive surface potential of 55 mV suggest that the hybrid as an ideal support for electrocatalysis. Ultimately, the hybrid was found to be an efficient receptor material for electrochemical performance towards the binding of uric acid which is an important biomolecule of human metabolism. The designed material enabled the detection of uric acid concentrations as low as 30 nM. This synthesis strategy is highly suitable to design new hybrid materials with interesting morphology and outstanding properties for the identification of clinically relevant biomolecules., (Copyright © 2019 Elsevier Inc. All rights reserved.)

Overuse and thus a constant presence of antibiotics leads to various environmental hazards and health risks. Thus, accurate sensors are required to determine their presence. In this work, we present a mass-sensitive sensor for the detection of rifampicin. We chose this molecule as it is an important antibiotic for tuberculosis, one of the leading causes of deaths worldwide. Herein, we have prepared a carbon nanotube reinforced with bismuth tungstate nanocomposite material in a well-defined nanosheet morphology using a facile in situ synthesis mechanism. Morphological characterization revealed the presence of bismuth tungstate in the form of square nanosheets embedded in the intricate network of carbon nanotubes, resulting in higher surface roughness of the nanocomposite. The synergy of the composite, so formed, manifested a high affinity for rifampicin as compared to the individual components of the composite. The developed sensor possessed a high sensitivity toward rifampicin with a detection limit of 0.16 μM and excellent specificity, as compared to rifabutin and rifapentine. Furthermore, the sensor yielded statistically good recoveries for the monitoring of rifampicin in human urine samples. This work opens up a new horizon for the exploration of unconventional nanomaterials bearing different morphologies for the detection of pharmaceuticals., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Development of 1D nanostructures with novel morphology is a recent scientific attraction, so to say yielding unusual materials for advanced applications. In this work, we have prepared solution grown, single-pot 1D ZnWO 4 nanowires (NWs) and the morphology is assessed for label-free but selective detection of chloramphenicol. This is the first report where, such structures are being investigated for this purpose. Transmission electron microscopy shows the presence of strands of ZnWO 4 of about 20 nm in diameter. The formed NWs were highly dispersed in nature with uniform size and shape. X-ray diffraction analysis confirmed high purity of the designed NWs despite solution synthesis. X-ray photoelectron spectroscopy confirmed surface valence state of ZnWO 4 . Fourier transform infrared spectroscopy was employed for the ascription of functional groups, whereas, optical properties were investigated using photoluminescence. NWs were employed for the detection of a model antibiotic, chloramphenicol. The developed sensor exhibited excellent limit of detection, 0.32 μM and 100% specificity as compared to its structural and functional analogues such as thiamphenicol and clindamycin. This work can broaden new opportunities for the researchers to explore unconventional nanomaterials bearing unique morphologies and quantum phenomenon for the label-free detection of other bioanalytes., (Copyright © 2018 Elsevier B.V. All rights reserved.)

Nanosensors with high sensitivity utilize electrical, optical, and acoustic properties to improve the detection limits of analytes. The unique and exceptional properties of nanomaterials (large surface area to volume ratio, composition, charge, reactive sites, physical structure and potential) are exploited for sensing purposes. High-sensitivity in analyte recognition is achieved by preprocessing of samples, signal amplification and by applying different transduction approaches. In this review, types of signals produced and amplified by nanosensors (based on transducers) are presented, to sense exceptionally small concentrations of analytes present in a sample. The use of such nanosensors, sensitivity and selectivity can offer different advantages in biomedical applications like earlier detection of disease, toxins or biological threats and create significant improvements in clinical as well as environmental and industrial outcomes. The emerging discipline of nanotechnology at the boundary of life sciences and chemistry offers a wide range of prospects within a number of fields like fabrication and characterization of nanomaterials, supramolecular chemistry, targeted drug supply and early detection of disease related biomarkers., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

Pseudomonas aeruginosa and Staphylococcus aureus are among the hazardous biofilm forming bacteria ubiquitous in industrial/clinical wastes. Serious efforts are required to develop effective strategies to control surface-growing antibiotic resistant pathogenic bacterial communities which they are emerging as a global health issue. Blocking hazardous biofilms would be a useful aspect of biosurfactant coated nanoparticles (NPs). In this regard, we report a facile method for the synthesis of rhamnolipid (RL) coated silver (Ag) and iron oxide (Fe 3 O 4 ) NPs and propose the mechanism of their synergistic antibacterial and anti-adhesive properties against biofilms formed by P. aeruginosa and S. aureus. These NPs demonstrated excellent anti-biofilm activity not only during the biofilms formation but also on the pre-formed biofilms. Mechanistically, RL coated silver (35 nm) and Fe 3 O 4 NPs (48 nm) generate reactive oxygen species, which contribute to the antimicrobial activity. The presence of RLs shell on the nanoparticles significantly reduces the cell adhesion by modifying the surface hydrophobicity and hence enhancing the anti-biofilm property of NPs against both mentioned strains. These findings suggest that RL coated Ag and Fe 3 O 4 NPs may be used as potent alternate to reduce the infection severity by inhibiting the biofilm formation and, therefore, they possess potential biomedical applications for antibacterial coatings and wound dressings., (Copyright © 2018 Elsevier B.V. All rights reserved.)

In resource-limited settings, the availability of medical practitioners and early diagnostic facilities are inadequate relative to the population size and disease burden. To address cost and delayed time issues in diagnostics, strip-based immunoassays, e.g. dipstick, lateral flow assay (LFA) and microfluidic paper-based analytical devices (microPADs), have emerged as promising alternatives to conventional diagnostic approaches. These assays rely on chromogenic agents to detect disease biomarkers. However, limited specificity and sensitivity have motivated scientists to improve the efficiency of these assays by conjugating chromogenic agents with nanoparticles for enhanced qualitative and quantitative output. Various nanomaterials, which include metallic, magnetic and luminescent nanoparticles, are being used in the fabrication of biosensors to detect and quantify biomolecules and disease biomarkers. This review discusses some of the principles and applications of such nanoparticle-based point of care biosensors in biomedical diagnosis.

For SLN lymph node biopsy (SLNB), SLN mapping has become a standard of care procedure that can accurately locate the micrometastases disseminated from primary tumor sites to the regional lymph nodes. The broad array of SLN mapping has prompted the development of a wide range of SLN tracers, rationally designed for noninvasive and high-resolution imaging of SLNs. At present, conventional SLN imaging probes (blue dyes, radiocolloids, and few other small-molecular dyes), although serving the clinical needs, are often associated with major issues such as insufficient accumulation in SLN, short retention time, staining of the surgical field, and other adverse side effects. In a recent advancement, newly designed fluorescent nanoprobes are equipped with novel features that could be of high interest in SLN mapping such as (i) a unique niche that is not met by any other conventional SLN probes, (ii) their adoptable synthesis method, and (ii) excellent sensitivity facilitating high resolution SLN mapping. Most importantly, lots of effort has been devoted for translating the fluorescent nanoprobes into a clinical setup and also imparting the multimodal imaging abilities of nanoprobes for the excellent diagnosis of life-threatening diseases such as cancer. In this review, we will provide a detailed roadmap of the progress of a wide variety of current fluorescent molecular probes and emphasize the future of nanomaterial-based single/multimodal imaging probes that have true potential translation abilities for SLN mapping.

This work is the first report describing the solution grown 3D manganese oxide nanofibrous (MnO 2 NFs) mesh and its potential for the simultaneous detection of biomolecules such as ascorbic acid and uric acid. The mesh is synthesized by a facile, one-pot, and cost-effective hydrothermal approach without using any template or structure directing compound. The morphology consists of randomly placed nanofibres possessing a diameter in the range of 10-25 nm, and length of several micron; constituting a highly porous and flexible material. The electrochemical potential was examined by recording cyclic voltammetry signals towards ascorbic acid and uric acid. The special mesh morphology offers a large surface area to promote enhanced electrochemical activity, and also provided a macroporous network that supported efficient mass transport. Additionally, the strong electronic cloud and roughness of MnO 2 NFs mesh facilitated the fast oxidation of species at very low potential. The lower detection limit was found to be 1.33 µM (S/N = 3) and 1.03 µM (S/N = 3) for ascorbic acid and uric acid, respectively. The MnO 2 NFs mesh modified electrodes can robustly differentiate both of them by giving well separate signals (Δ = 500 mV) indicating capability of the material towards selective detection. The sensor has been successfully applied to human blood and urine samples and the recoveries were found statistically significant. These results demonstrate the practical feasibility of 3D mesh to develop sensors for the accurate diagnosis of clinically important molecules., (Copyright © 2018 Elsevier B.V. All rights reserved.)

Gasoline-ethanol (gasohol) fuel blends have gained considerable attention in the petroleum and energy sectors as relatively cheaper and greener high-octane alternative fuels with gasoline-comparable efficiency in modern transportation vehicles. However, due to different combustion rates the relative concentration of ethanol in gasohol fuel blends may vary over time. Furthermore, there is a need to monitor ethanol concentration in fuel blends for quality control applications. This article reports a miniaturized electronic sensor based on an interdigital capacitor (IDC) as the transducer and a dual-imprinted titania-polyaniline composite film as the receptor. The device has an active surface area of 0.9 cm 2 and is easy to fabricate. The receptor material is synthesized by imprinting ethanol in both titania sol (EITS, the matrix) and polyaniline nanoparticles (EIPani, the filler), and subsequently mixing them to obtain a dual-imprinted EITS-EIPani composite. The structural and morphological characteristics of the receptor layers are determined with Fourier transform infrared (FTIR) spectroscopy and atomic force microscopy (AFM), respectively. The IDC devices are fabricated with pristine EITS and dual-imprinted EITS-EIPani composite to test their metrological sensor characteristics in standard ethanol solutions and real-time gasohol fuel blends. The instant shift in capacitance is measured upon exposure to different concentrations of ethanol. These devices show excellent sensitivity and selectivity patterns and demonstrate reliable sensor response toward ethanol in different gasohol fuel blends with 1-10 vol% ethanol. The results of this study reveal that these miniaturized ethanol sensors are potentially useful for rapid analysis of ethanol in gasohol and may be optimized for onboard fuel quality control applications., Competing Interests: The authors declare no competing financial interest., (This journal is © The Royal Society of Chemistry.)

We report the development of effective drug loaded nanocarriers to combat multidrug resistant infection especially in case of osteomyelitis. The hollow mesoporous hydroxyapatite nanoparticles (hmHANPs) and solid/non-hollow hydroxyapatite nanoparticles (sHANPs) were synthesized by core-shell and co-precipitation techniques respectively. High encapsulation of the drug (ciprofloxacin) was observed in hmHANPs as compared to sHANPs, which may be due to the hollow porous structure of hmHANPs. These nanoparticles were characterized by scanning electron microscope (FESEM), N 2 adsorption/desorption, Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD) and Thermogravimetric analysis (TGA). Approximately 80% of the encapsulated drug was released at pH 4.5 within 5 days in case of hmHANPs while at pH 7.4, a sustained drug release profile was obtained and only 48.73% of the drug was released after 9 days. The results of kinetic drug release revealed that drug loaded hmHANPs showed fickian diffusion and anomalous drug diffusion mechanism at pH 4.5 and 7.4 respectively. Owing to their porous structure and high drug loading capacity, hmHANPs showed enhanced antibacterial activity against Staphylococcus aureus and Escherichia coli (drug resistant strains of osteomyelitis) in comparison to that with sHANPs. In addition, hmHANPs showed a pH sensitive drug release profile, high surface area (105.33 m 2 /g) with increased pore volume (0.533 cm 3 /g) and superior antimicrobial activity against osteomyelitis as compared to sHANPs., (Copyright © 2018 Elsevier B.V. All rights reserved.)

We report a biosensor that combines the construction of a three-dimensional nanocomposite with electrochemical methods for the detection of viruses in plants. This is the first report, where carbon nanotubes are used as a conductive frame to anchor highly electrolytic agglomerates of copper nanoparticles to detect agroviruses. Morphological analysis of nanocomposite revealed the presence of carbon nanotubes having a diameter of 50-100nm with copper nanoparticles of 20-100nm, attached in the form of bunches. This material was applied to assess the infection caused by geminiviruses which are a major threat to the cotton plants in Asian and African countries. The hybridization events were studied by monitoring differential pulse voltammetry signals using methylene blue as a redox indicator. In the presence of target DNA, sensor signals decreased from 7×10 -4 to 1×10 -4 Ampere. The probe exhibited 97.14% selectivity and the detection limit was found to be 0.01ngμL -1 . The developed biosensor is stable for at least four weeks, losing only 4.3% of the initial signal value. This sensor was able to detect the presence of viruses in sap extracted from cotton leaves, thus providing a promising platform to detect a range of other crops-infecting viruses., (Copyright © 2017 Elsevier B.V. All rights reserved.)

Nanotechnology holds great promise for the fabrication of versatile materials that can be used as sensor platforms for the highly selective detection of analytes. In this research article we report a new nanohybrid material, where 3D imprinted nanostructures are constructed. First, copper nanoparticles are deposited on carbon nanotubes and then a hybrid structure is formed by coating molecularly imprinted polymer on 3D CNTs@Cu NPs; and a layer by layer assembly is achieved. SEM and AFM revealed the presence of Cu NPs (100-500nm) anchored along the whole length of CNTs, topped with imprinted layer. This material was applied to fabricate an electrochemical sensor to monitor a model veterinary drug, chloramphenicol. The high electron transfer ability and conductivity of the prepared material produced sensitive response, whereas, molecular imprinting produces selectivity towards drug detection. The sensor responses were found concentration dependent and the detection limit was calculated to be 10μM (S/N=3). Finally, we showed how changing the polymer composition, the extent of cross linking, and sensor layer thickness greatly affects the number of binding sites for the recognition of drug. This work paves the way to build variants of 3D imprinted materials for the detection of other kinds of biomolecules and antibiotics., (Copyright © 2017 Elsevier B.V. All rights reserved.)

We report a novel strategy for the fabrication of lecithin-coated gold nanoflowers (GNFs) via single-step design for CT imaging application. Field-emission electron microscope confirmed flowers like morphology of the as-synthesized nanostructures. Furthermore, these show absorption peak in near-infrared (NIR) region at λ max 690 nm Different concentrations of GNFs are tested as a contrast agent in CT scans at tube voltage 135 kV and tube current 350 mA. These results are compared with same amount of iodine at same CT scan parameters. The results of in vitro CT scan study show that GNFs have good contrast enhancement properties, whereas in vivo study of rabbits CT scan shows that GNFs enhance the CT image clearly at 135 kV as compared to that of iodine. Cytotoxicity was studied and blood profile show minor increase of white blood cells and haemoglobin, whereas decrease of red blood cells and platelets.

The emergence of nanotechnology has opened new horizons for constructing efficient recognition interfaces. This is the first report where the potential of a multiwalled carbon nanotube based zinc nanocomposite (MWCNTs-Zn NPs) investigated for the detection of an agricultural pathogen i.e. Chili leaf curl betasatellite (ChLCB). Atomic force microscope analyses revealed the presence of multiwalled carbon nanotubes (MWCNTs) having a diameter of 50-100nm with zinc nanoparticles (Zn-NPs) of 25-500nm. In this system, these bunches of Zn-NPs anchored along the whole lengths of MWCNTs were used for the immobilization of probe DNA strands. The electrochemical performance of DNA biosensor was assessed in the absence and presence of the complementary DNA during cyclic and differential pulse voltammetry scans. Target binding events occurring on the interface surface patterned with single-stranded DNA was quantitatively translated into electrochemical signals due to hybridization process. In the presence of complementary target DNA, as the result of duplex formation, there was a decrease in the peak current from 1.89×10 -04 to 5.84×10 -05 A. The specificity of this electrochemical DNA biosensor was found to be three times as compared to non-complementary DNA. This material structuring technique can be extended to design interfaces for the recognition of the other plant viruses and biomolecules., (Copyright © 2017 Elsevier B.V. All rights reserved.)

This work is the first report describing the development of a novel three dimensional manganese nanostructures based carbon nanotubes (CNTs-Mn NPs) composite, for the determination of ascorbic acid (vitamin C) in pharmaceutical formulation. Carbon nanotubes (CNTs) were used as a conductive skeleton to anchor highly electrolytic manganese nanoparticles (Mn NPs), which were prepared by a hydrothermal method. Scanning electron microscopy and atomic force microscopy revealed the presence of Mn Nps of 20-25nm, anchored along the whole length of CNTs, in the form of patches having a diameter of 50-500nm. Fourier transform infrared spectroscopy confirmed the surface modification of CNTs by amine groups, whereas dynamic light scattering established the presence of positive charge on the prepared nanocomposite. The binding events were studied by monitoring cyclic voltammetry signals and the developed nanosensor exhibited highly sensitive response, demonstrating improved electrochemical activity towards ascorbic acid. Linear dependence of the peak current on the square root of scan rates (R 2 =0.9785), demonstrated that the oxidation of ascorbic acid by the designed nanostructures is a diffusion control mechanism. Furthermore, linear range was found to be 0.06-4.0×10 -3 M, and nanosensor displayed an excellent detection limit of 0.1µM (S/N=3). This developed nanosensor was successfully applied for the determination of vitamin C in pharmaceutical formulation. Besides, the results of the present study indicate that such a sensing platform may offer a different pathway to utilize manganese nanoparticles based CNTs composite for the determination of other bio-molecules as well., (Copyright © 2016 Elsevier B.V. All rights reserved.)

In the present work, novel molecularly imprinted polymer porous beads for the selective separation of copper ions have been synthesized by combining two material-structuring techniques, namely, molecular imprinting and oil-in-water-in-oil emulsion polymerization. This method produces monodisperse spherical beads with an average diameter of ∼2-3 mm, in contrast to adsorbents produced in the traditional way of grinding and sieving. Field-emission scanning electron microscopy indicates that the beads are porous in nature with interconnected pores of about 25-50 μm. Brunner-Emmett-Teller analysis shows that the ion-imprinted beads possess a high surface area (8.05 m(2) /g), and the total pore volume is determined to be 0.00823 cm(3) /g. As a result of the highly porous nature and ion-imprinting, the beads exhibit a superior adsorption capacity (84 mg/g) towards copper than the non-imprinted material (22 mg/g). Furthermore, selectivity studies indicate that imprinted beads show splendid recognizing ability, that is, nearly fourfold greater selective binding for Cu(2+) in comparison to the other bivalent ions such as Mn(2+) , Ni(2+) , Co(2+) , and Ca(2+) . The imprinted composite beads prepared in this study possess uniform porous morphology and may open up new possibilities for the selective removal of copper ions from waste water/contaminated matrices., (© 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

In this study, new molecularly imprinted polymer (MIP) nanoparticles are designed for selective recognition of different drugs used for the treatment of type 2 diabetes mellitus, i.e. sitagliptin (SG) and metformin (MF). The SG- and MF-imprinted polymer nanoparticles are synthesized by free-radical initiated polymerization of the functional monomers: methacrylic acid and methyl methacrylate; and the crosslinker: ethylene glycol dimethacrylate. The surface morphology of resultant MIP nanoparticles is studied by atomic force microscopy. Fourier transform infrared spectra of MIP nanoparticles suggest the presence of reversible, non-covalent interactions between the template and the polymer. The effect of pH on the rebinding of antidiabetic drugs with SG- and MF-imprinted polymers is investigated to determine the optimal experimental conditions. The molecular recognition characteristics of SG- and MF-imprinted polymers for the respective drug targets are determined at low concentrations of SG (50-150 ppm) and MF (5-100 ppm). In both cases, the MIP nanoparticles exhibit higher binding response compared to non-imprinted polymers. Furthermore, the MIPs demonstrate high selectivity with four fold higher responses toward imprinted drugs targets, respectively. Recycled MIP nanoparticles retain 90% of their drug-binding efficiency, which makes them suitable for successive analyses with significantly preserved recognition features., (© 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Binding features found in biological systems can be implemented into man-made materials to design nanostructured artificial receptor matrices which are suitable, e.g., for chemical sensing applications. A range of different non-covalent interactions can be utilized based on the chemical properties of the respective analyte. One example is the formation of coordinative bonds between a polymerizable ligand (e.g., N-vinyl-2-pyrrolidone) and a metal ion (e.g., Cu(II)). Optimized molecularly imprinted sensor layers lead to selectivity factors of at least 2 compared to other bivalent ions. In the same way, H-bonds can be utilized for such sensing purposes, as shown in the case of Escherichia coli. The respective molecularly imprinted polymer leads to the selectivity factor of more than 5 between the W and B strains, respectively. Furthermore, nanoparticles with optimized Pearson hardness allow for designing sensors to detect organic thiols in air. The 'harder' MoS2 yields only about 40% of the signals towards octane thiol as compared to the 'softer' Cu2S. However, both materials strongly prefer molecules with -SH functionality over others, such as hydrocarbon chains. Finally, selectivity studies with wheat germ agglutinin (WGA) reveal that artificial receptors yield selectivities between WGA and bovine serum albumin that are only about a factor of 2 which is smaller than natural ligands.