Search

In order to improve the output power of laser pulse in the inertia confinement fusion experiment, an arbitrary waveform generator is fabricated to shape the laser pulse. The arbitrary waveform generator is based on the impedance tapered micro-strip line technology and GaAs Field Effect Transistor set which has a good ability of generating voltage-controlled current. With the impedance tapered micro-strip line technology, the arbitrary waveform generator generates shaping electrical pulse with duration less than 10 ns, 330 ps time-domain adjustment. We use the shaping electrical pulse to modulate semiconductor laser which has the characteristic of direct modulate, the experiment results show the shaped laser pulse is obtained based on the shaping electrical pulse.

In order to track degradation trend of bearing performance using shock feature hidden in vibration signal, a best Morlet wavelet transform-based extraction method of full information energy entropy was proposed through integrating Morlet wavelet transform technology and full information technology. The optimization of Morlet wave shape factor was controlled by the minimum Shannon entropy. The information entropy derived from wavelet transform coefficients of multiple sources vibration data was used to reflect the different frequency range-based energy distribution variance of shock feature. Viewed from the application for rolling bearing full lifetime vibration datasets, the results show that the feature trends can reflect the degradation process of bearing health and the bearing operational safety can be ensured by incipient fault detection.

Based on the characteristic of high speed line scanning for CCD in transient spectrum detection, a method of transient spectrum detection with array CCD is presented. The high speed line scanning with array CCD was realized by changing the mode of charge transfer. In order to explore the feasibility of this method, a fast detection system of single point based on linear CCD was designed and fabricated. Seven different LED pulses were measured when the system worked at fast detection mode of single point and normal mode respectively. The results demonstrate that the method of fast detection of single point based on linear CCD is feasible, and the rate of single point detection reaches up to 20 MHz. Thus, in theory, it was proved that transient spectrum detection with array CCD by changing the mode of charge transfer is also feasible.

Based on the spectral characteristic of the detonation temperature, the present paper presents a measurement system of transient multi-wavelength pyrometry with the theory of multi-wavelength thermometry. The FPGA was applied as the hardware developing platform and the high-speed linear CCD was utilized. Each module was controlled by FPGA to achieve the process of real-time data acquisition, storage and transmission. Using the multiple regression analysis method, the dynamic spectral waveforms were calculated. The two laser spectral lines, 630 and 532 nm, were used to calibrate the corresponding pixel sequence numbers and the No. 175 and No. 270 were confirmed. In this paper, the halide tungsten light was measured. The results show that the system can sample continuous spectrum signal at several different times; the CCD can stably work with 40 MHz clock and the frame scanning frequency can achieve 73 kHz.