Search

In this study, a full-scale train bogie derailment test was conducted. For this, test methodologies to describe the wheel-climbing derailment of the train bogie and to obtain accurate test data were proposed. The derailment test was performed with the casting bogie for a freight train and a Rheda 2000 concrete track. Two different derailment velocities (28.08 km/h and 55.05 km/h) were considered. From the test, it was found that humps in the concrete track affected the post-derailment behavior of the bogie when the derailment velocity was 28.08 km/h. For a higher derailment velocity (55.05 km/h), significant lateral movement of the derailed bogie was observed. This lateral movement was first controlled by wheel–rail contact, followed by contact with the containment wall. Finally, the train was returned to the track center. [ABSTRACT FROM AUTHOR]

Europe, USA, China, Japan, and Korea, which possess advanced railway technologies, have attempted to develop high-speed rail technology and ensure safety based on social requirements and the need for greater speeds. However, despite these efforts, there have been recent reports of train accidents resulting in loss of lives. Fatal train accidents usually involve derailments or collisions that do not happen frequently. However, when they occur, the damage is catastrophic. Therefore, a protection infrastructure should be installed to minimize such damage. Since the high-speed railways were introduced in Korea, derailment containment walls have been constructed to mitigate and minimize the damages caused by such accidents. The need for the judgment of effectiveness and feasibility review of the derailment containment walls in terms of economics and construction ability has been presented by designers and constructors. In this paper, the authors have evaluated the containment capacity and collision durability (crashworthiness) of a derailment containment wall, constructed in Korea, using a collision simulation after the derailment of a train. [ABSTRACT FROM AUTHOR]

Continuous welded rail (CWR) track has several advantages when compared with conventional jointed rail track. However, a thermally induced axial load can lead to the buckling of CWR tracks, which can result in train derailment. The buckling of CWR tracks is affected by several parameters, including the rail’s neutral temperature, misalignment of the rails and ballast resistance. Most of these parameters can be considered as random variables. A deterministic analysis approach is generally used to predict the buckling of CWR tracks; however, it can provide conservative results since it is based on the worst-case scenario of these buckling parameters. This paper presents a probabilistic buckling analysis scheme for CWR tracks. [ABSTRACT FROM AUTHOR]