Search

Rivers in developing and emerging countries often lack good water quality. Tools to assess the water quality in rivers, including identification of possible sources of pollution, are therefore of increasing importance. The aim of this study is to apply mathematical material flow and spatial land use analyses to identify and geographically locate the main nitrogen and phosphorus sources and processes in Bang Pakong Basin (BPB). Potential measures to mitigate the nitrogen and phosphorus loads to the water system can then be efficiently evaluated. The combination of these two methods reveals the overall nutrient load as well as local "hot spots." This allows possible mitigation measures to be discussed with regard to their spatial location. This approach goes beyond previous work in which mathematical material flow analysis was shown to be a useful tool to investigate sources of nutrients regardless of their location. The results show that the main sources contributing nutrients to waterways are aquaculture, such as shrimp, tilapia, catfish, and sea bass farming, as well as rice paddies along the main river. Additional sources contributing nutrients to this basin are field crops, livestock, aquaculture, households, and industry. High levels of nutrient inflows come from feeds and fertilizers through aquaculture and rice cultivation. The excess nutrients run into the waterways by direct discharge from aquaculture and runoff processes from rice paddies. Scenario analysis shows that management practices for aquaculture, rice, pig, and poultry farming are key drivers for reducing nutrients in the BPB.

Pharmaceuticals constitute an important environmental issue for receiving waters. A holistic approach, taking into consideration the sources of these compounds (hospitals, domestic use), discharges (wastewater effluent, combined sewer overflows) and related risks to the environment, is therefore needed to develop the best protection strategy. The substance flow analysis (SFA) approach, applied, for example, to the city of Lausanne, Switzerland, is an ideal tool to tackle these issues. Four substances were considered: one antibiotic (ciprofloxacin), an analgesic (diclofenac), and two anti-epileptics (carbamazepine and gabapentin). Consumption data for the main hospital of the city (916 beds) and for the population were available. Micropollutant concentrations were measured at different points of the system: wastewater inlet and outlet (WWTP), combined sewer overflows (CSO) and in the receiving waters (Vidy Bay, Lake Geneva). Measured and predicted concentrations were in agreement, except for diclofenac, for which analytical uncertainties were expected. Seven different scenarios were considered (supplementary treatment at the WWTP, at the hospital or at both places, etc.). Based on the results obtained, the supplementary treatment at the WWTP decreases the load of pharmaceuticals reaching surface water by a factor between 2 and 27, depending on the compound and on the technique. The treatment at the hospitals only influences the amount of ciprofloxacin reaching the environment and decreases the release by one third. The contribution of CSO to surface water pollution is low compared to that of the WWTP for the selected compounds. Regarding the risk for the receiving waters, ciprofloxacin was found to be the most problematic compound, with a risk quotient far above 1. In this particular case, a treatment at the WWTP is not sufficient to reduce the risk, and additional measures at the CSO or at the hospital should be considered. SFA is an ideal tool for developing the best strategy for pharmaceutical elimination, but its application depends on data availability and local conditions., (Copyright © 2013 Elsevier Ltd. All rights reserved.)

Biocides leach from facades during rain events and subsequently enter the aquatic environment with storm water. Little is known about the losses of an entire settlement, since most studies referred to wash-off experiments conducted under laboratory conditions. Their results show a fast decrease of concentrations in the beginning, which subsequently slows down. The aim of this study is to develop a simple model to understand the mechanisms leading to these losses as well as to simulate losses under various rainfall and application conditions. We developed a four-box model based on the knowledge gained from fits of an exponential function to an existing experimental data set of a wash-off experiment. The model consists of two mobile stocks from which biocides are washed off during a rain event. These mobile stocks are supplied with biocides from storage stocks by diffusion-type processes. The model accurately reproduced the measured data of wash-off during single cycles as well as peak wash-offs over all cycles. Our model results for diuron losses showed that a large proportion (∼ 70%) of the applied biocides are still in the stocks even after a rain volume corresponding to several years (1100 mm y(-1), Swiss Plateau). Applications to realistic outdoor conditions showed that losses can not be neglected for urban environments and that knowledge about the amount of rainfall turned into runoff and the decay constants of the biocides in the facades are crucial. The model increased our understanding of the processes leading to the observed dynamic in laboratory experiments and was used to simulate losses for various rainfall and application conditions., (Copyright © 2011 Elsevier Ltd. All rights reserved.)

Context: Dental and skeletal fluorosis is endemic in the Ethiopian Rift Valley. Children are especially vulnerable to excessive fluoride intake because their permanent teeth are still being formed. Strategies to reduce the total fluoride intake by children are thus warranted., Case Presentation: By combining the results of field studies in Ethiopia, the relevant pathways for fluoride intake have been identified in 28 children 2-5 years of age living in two villages on the Wonji Shoa Sugar Estate in the Ethiopian Rift Valley. The focus of the present study was to simulate the fluoride intake of the children using the methods of material flow analysis (MFA) and substance flow analysis., Discussion: With a model based on MFA, we quantified the potential reduction in total fluoride intake given different scenarios-for example, by reducing the fluoride intake from drinking water and cooking water. The results show clearly that only by removing fluoride completely from both drinking and cooking water does the probability of remaining below the daily tolerable upper intake level exceed 50%. Both prepared food and food ingredients must be taken into consideration when assessing the total fluoride intake by children living in high-fluoride areas., Relevance: This knowledge will help health personnel, the government, and the food authorities to give scientifically based advice on strategies for reducing the total fluoride intake by children living in high-fluoride areas in the Ethiopian Rift Valley.

Biocides and pesticides are used to control unwanted organisms in urban and agricultural areas. After application, they can be lost to surface waters and impair water quality. Several national consumption studies have shown that urban and agricultural use may be in the same range. It is difficult to judge whether this results in similar loadings of surface waters because there is a lack of sound, comparative studies addressing urban and agricultural losses simultaneously. The aim of this study is thus to relate the biocide and pesticide loads found in surface waters to their respective urban and agricultural usage (loss rates). To simultaneously assess the loss rates, we conducted a comprehensive field study in a catchment of mixed land use on the Swiss Plateau. The study area was divided into four sub-catchments with different degrees of urban and agricultural land use. In addition, we studied the only wastewater treatment plant, a combined sewer overflow and a storm sewer within the area. Rain events were sampled at high temporal resolution from March to November, 2007. Information on agricultural applications was gained from local farmers. For urban uses, consumption estimations were conducted based on statistical and product information. Despite substantially lower amounts used, the measured loads of urban biocides were in the same range as the most widely-used agricultural pesticides. The lower usage was compensated by urban loss rates that were up to ten times higher than agricultural ones (0.6 to 15% for urban, 0.4 to 0.9% for agricultural compounds). For most biocides and pesticides, the loads were controlled by rain events. Besides the rain-controlled losses, some urban-used biocides (e.g. diazinon) showed a continuous load independent of rain events and season. This study demonstrates that in catchments with mixed land use, mitigation strategies have to pay sufficient attention to the urban sources., (Copyright © 2010 Elsevier B.V. All rights reserved.)

Human activity results in the production of a wide range of pollutants that can enter the water cycle through stormwater or wastewater. Among others, heavy metals are still detected in high concentrations around urban areas and their impact on aquatic organisms is of major concern. In this study, we propose to use a substance flow analysis as a tool for heavy metals management in urban areas. We illustrate the approach with the case of copper in Lausanne, Switzerland. The results show that around 1,500 kg of copper enter the aquatic compartment yearly. This amount contributes to sediment enrichment, which may pose a long-term risk for benthic organisms. The major sources of copper in receiving surface water are roofs and catenaries of trolleybuses. They represent 75% of the total input of copper into the urban water system. Actions to reduce copper pollution should therefore focus on these sources. Substance flow analysis also highlights that copper enters surface water mainly during rain events, i.e., without passing through any treatment procedure. A reduction in pollution could also be achieved by improving stormwater management. In conclusion, the study showed that substance flow analysis is a very effective tool for sustainable urban water management.

This paper explores the potential of combining substance-flow modelling with water and wastewater sampling to trace consumption-related substances emitted through the urban wastewater. The method is exemplified on sucralose. Sucralose is a chemical sweetener that is 600 times sweeter than sucrose and has been on the European market since 2004. As a food additive, sucralose has recently increased in usage in a number of foods, such as soft drinks, dairy products, candy and several dietary products. In a field campaign, sucralose concentrations were measured in the inflow and outflow of the local wastewater treatment plant in Linköping, Sweden, as well as upstream and downstream of the receiving stream and in Lake Roxen. This allows the loads emitted from the city to be estimated. A method consisting of solid-phase extraction followed by liquid chromatography and high resolution mass spectrometry was used to quantify the sucralose in the collected surface and wastewater samples. To identify and quantify the sucralose sources, a consumption analysis of households including small business enterprises was conducted as well as an estimation of the emissions from the local food industry. The application of a simple model including uncertainty and sensitivity analysis indicates that at present not one large source but rather several small sources contribute to the load coming from households, small business enterprises and industry. This is in contrast to the consumption pattern seen two years earlier, which was dominated by one product. The inflow to the wastewater treatment plant decreased significantly from other measurements made two years earlier. The study shows that the combination of substance-flow modelling with the analysis of the loads to the receiving waters helps us to understand consumption-related emissions., (Copyright 2010 Elsevier B.V. All rights reserved.)

Biocides and pesticides are designed to control the occurrence of unwanted organisms. From their point of application, these substances can be mobilized and transported to surface waters posing a threat to the aquatic environment. Historically, agricultural pesticides have received substantially more attention than biocidal compounds from urban use, despite being used in similar quantities. This study aims at improving our understanding of the influence of mixed urban and agricultural land use on the overall concentration dynamics of biocides and pesticides during rain events throughout the year. A comprehensive field study was conducted in a catchment within the Swiss plateau (25 km(2)). Four surface water sampling sites represented varying combinations of urban and agricultural sources. Additionally, the urban drainage system was studied by sampling the only wastewater treatment plant (WWTP) in the catchment, a combined sewer overflow (CSO), and a storm sewer (SS). High temporal resolution sampling was carried out during rain events from March to November 2007. The results, based on more than 600 samples analyzed for 23 substances, revealed distinct and complex concentration patterns for different compounds and sources. Five types of concentration patterns can be distinguished: a) compounds that showed elevated background concentrations throughout the year (e.g. diazinon >50 ng L(-1)), indicating a constant household source; b) compounds that showed elevated concentrations driven by rain events throughout the year (e.g. diuron 100-300 ng L(-1)), indicating a constant urban outdoor source such as facades; c) compounds with seasonal peak concentrations driven by rain events from urban and agricultural areas (e.g. mecoprop 1600 ng L(-1) and atrazine 2500 ng L(-1) respectively); d) compounds that showed unpredictably sharp peaks (e.g. atrazine 10,000 ng L(-1), diazinon 2500 ng L(-1)), which were most probably due to improper handling or even disposal of products; and finally, e) compounds that were used in high amounts but were not detected in surface waters (e.g. isothiazolinones). It can be safely concluded that in catchments of mixed land use, the contributions of biocide and pesticide inputs into surface waters from urban areas are at least as important as those from agricultural areas., (Copyright (c) 2010 Elsevier Ltd. All rights reserved.)

Major rivers in developing and emerging countries suffer increasingly of severe degradation of water quality. The current study uses a mathematical Material Flow Analysis (MMFA) as a complementary approach to address the degradation of river water quality due to nutrient pollution in the Thachin River Basin in Central Thailand. This paper gives an overview of the origins and flow paths of the various point- and non-point pollution sources in the Thachin River Basin (in terms of nitrogen and phosphorus) and quantifies their relative importance within the system. The key parameters influencing the main nutrient flows are determined and possible mitigation measures discussed. The results show that aquaculture (as a point source) and rice farming (as a non-point source) are the key nutrient sources in the Thachin River Basin. Other point sources such as pig farms, households and industries, which were previously cited as the most relevant pollution sources in terms of organic pollution, play less significant roles in comparison. This order of importance shifts when considering the model results for the provincial level. Crosschecks with secondary data and field studies confirm the plausibility of our simulations. Specific nutrient loads for the pollution sources are derived; these can be used for a first broad quantification of nutrient pollution in comparable river basins. Based on an identification of the sensitive model parameters, possible mitigation scenarios are determined and their potential to reduce the nutrient load evaluated. A comparison of simulated nutrient loads with measured nutrient concentrations shows that nutrient retention in the river system may be significant. Sedimentation in the slow flowing surface water network as well as nitrogen emission to the air from the warm oxygen deficient waters are certainly partly responsible, but also wetlands along the river banks could play an important role as nutrient sinks.

Phosphorus is an important substance for agricultural production of food. Being a limited resource, it is of great interest for regional, as well as global food security. At the same time it presents a pollution problem for the aquatic environment in Sweden since it contributes to eutrophication of surface waters and the Baltic Sea. This study analyses the flow of phosphorus based on consumption and production of food for an average inhabitant of a Swedish city, Linköping, from 1870 until 2000. The study shows the changes in flows within the system of production and consumption of food, as well as between the different processes in this system, such as agriculture, food processing, consumption and waste handling, and output flows to the environment. The main changes in this system over time are a) the increasing flow of phosphorus reaching the consumer and hence the waste handling system, b) the increase in the flow of products from animal production, which mainly causes the increase in (a), and most notably c) the increased input of chemical fertilizer.

Despite continuous investment and various efforts to control pollution, urban water environments are worsening in large parts of the developing world. In order to reveal potential constraints and limitations of current practices of urban water management and to stimulate proactive intervention, we conducted a material flow analysis of the urban water system in Kunming City. The results demonstrate that the current efficiency of wastewater treatment is only around 25% and the emission of total phosphorous from the city into its receiving water, Dianchi Lake, is more than 25 times higher than its estimated tolerance. With regard to the crisis of water quantity and quality, the goal of a sustainable urban water environment cannot be attained with the current problem-solving approach in the region due to the technical limitations of the conventional urban drainage and treatment systems. A set of strategies is therefore proposed. The urban drainage system in Zurich is used as a reference for a potential best-available technology for conventional urban water management (BAT) scenario in terms of its low combined frequency of sewer overflow.

In the present study the water movement in a bottom ash landfill from a municipal solid waste incinerator (MSWI) was investigated. The pore regime of such landfills consists of macropores (with diameter > 50 microm), which make up about two-thirds of the total porosity and micropores. The program MACRO, which describes flow through porous media and takes both macro- and micropore flows into account, was applied. The model was calibrated with a time series from the landfill Riet, near Winterthur in Switzerland. In the present study the model was recalibrated at a time series for 1 year. With this scenario the influence of an expected reduction or increase of the porosity on leachate behaviour of such landfills over a long time (> 100 years) was studied ('long-term behaviour'). It has been shown that reliable information about water percolation can only be provided by obtaining more information about the hydraulic structure of such landfills. In particular, the number of macropores and the porosity exert great influence on the water movement.