117 results on '"Badarulzaman, Nur Azam"'
Search Results
2. Effect of heat treatment on modulus hardening and phase transformation in experimental 7xxx stir-cast alloy from recycled beverage cans
3. Preparation and Characterization of Hydroxyapatite Using Precursor Extracted from Cockle Shell Waste.
4. Tribological Behaviour of Aluminium-Copper-Cullet Metal Composite
5. Effects of Holding Time on the Properties of Recycled Aluminum-Copper-Cullet Metal Composites
6. Optimization of wear and hardness of Al–Zn–Mg–Cu alloy fabricated from recycled beverage can using response surface methodology
7. Studies on Silica Produced from Original and Firing Rice Husk
8. Characterisation of Minerals and Other Properties of Mukah Coal
9. The comparison of reinforcement used on carbon foam between graphite and carbon whisker on mechanical and physical properties
10. Characterizations of Calcium Oxide from Calcined Eggshell Waste
11. The Effect of Graphite Loading as Reinforcement on Carbon Foam from Natural Resources
12. Effect of Complexing Agent on The Morphology and Corrosion Effect of Cu-Sn-Zn Ternary Alloy via Electroplating
13. The evaluation of nickel deposit obtained via Watts electrolyte at ambient temperature
14. Relating fractographic analysis to yield strength of novel X7475 (Al–Zn–Mg–Cu) alloys produced by recycling aluminium beverage cans
15. EFFECT OF CURRENT DENSITY IN PRODUCTION OF Cu-Sn-Zn ALLOY via ELECTROPLATING USING LESS HAZARDOUS ELECTROLYTE
16. Mechanical properties of AA7075 aluminium chip reinforced rice husk silica by solid state technique
17. Effect of Imperfections on Conductivity and Hardness of High-Zn X7xxx Cast Al-Alloys Produced from Recycled Beverage Can
18. Effect of Annealing and Artificial Ageing Parameters on The Ultimate Tensile Strength and Elongation of New Al-(4-5) Zn- Mg-Mn-Cu Alloys Fabricated using Recycled Beverage Cans
19. Effects of Untreated and Treated Rice Husk Ash (RHA) on Physical Properties of Recycled Aluminium Chip AA7075
20. Effect of Water Loading on the Chemical Structure and Mechanical Properties of Thermoplastic Tapioca Starch Film
21. Effect of processing conditions on the fracture behavior of Al-5Zn-1.5Mg-1.0Mn-0.35Cu alloy fabricated from recycled beverage cans (RBCs) for bumper beam applications
22. Characterization of Amorphous Silica and Crystalline Silica From Rice Husk Ash on Water Filtration Application
23. Linking Spectrograph to Mechanical and Physical Properties of X7475 Experimental Alloys Produced from Recycling Beverage Cans for Bumper Beam Applications
24. Physical Properties and Hardness of Treated Amorphous Silica as Reinforcement of AA7075 Recycled Aluminum Chip
25. Effect of Burning Temperature on Rice Husk Silica as Reinforcement of Recycled Aluminium Chip AA7075
26. Preliminary Morpho-Mechanical Investigation of X7475 Al-Alloys Produced from Recycled Beverage Can
27. Correlating Conductivity with Hardness and Density in X7475 Alloys for Development of Linear Hardness Model
28. Effect of Different Complexing Agent on Microstructure of Electroplated Cu-Sn-Zn Ternary Alloy
29. Effect of isothermal heat treatment on hardness of X7475 aluminium alloys
30. The Ability of Crystalline and Amorphous Silica from Rice Husk Ash to Perform Quality Hardness for Ceramic Water Filtration Membrane
31. Physicomechanical Properties of Nanobiocomposite Composed of Polylactic Acid and Biogenic Nano Hydroxyapatite
32. Effect of processing conditions on the fracture behavior of Al-5Zn-1.5Mg-1.0Mn-0.35Cu alloy fabricated from recycled beverage cans (RBCs) for bumper beam applications.
33. Densification and grain growth of microwave-sintered yttrium iron garnet
34. Effects of holding time on the properties of direct recycled aluminum-copper-cullet metal composites
35. Preliminary investigation on Nigerian Quan’Pan clay for refractory application
36. Effect of Holding Time on Density and Morphological Property of Aluminium Composite Using Recycled Materials by Stir Casting Method
37. Probing Dynamic Mechanical Analysis and Atomic Force Microscopy of Polypropylene/Kaolin Nanocomposite
38. Study of physio-mechanical properties of refractory fireclay for production of furnace lining
39. Study of characteristics of rice husk and silica obtained from rice husk
40. Evaluation of corrosion and wear behaviour of nickel tungsten carbide electrodeposited with different tungsten carbide concentration and current density
41. Thermal assessment of kpata fireclay for refractory applications
42. Structural and morphological studies of polypropylene/kaolin nanocomposite
43. Structural and Morphological Studies of Polypropylene/Kaolin Nanocomposite
44. The Effect of Boron Oxide on Concentration of Iron Ion Released from SiO2-B2O3-Na2CO3-Fe2O3 Glass System
45. Dynamic Mechanical and Roughness Analyses of Polypropylene/Kaolin Nanocomposite
46. Densification and Grain Growth of Microwave-Sintered Yttrium Iron Garnet.
47. Effects of Holding Time on the Properties of Direct Recycled Aluminum-Copper-Cullet Metal Composites.
48. Preliminary Investigation on Nigerian Quan’Pan Clay for Refractory Application.
49. Chemical Composition and Particle Size Analysis of Kaolin
50. Effects of Acid Treatment on the SEM-EDX Characteristics of Kaolin Clay
Catalog
Books, media, physical & digital resources
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.