Search

With the increasing focus on indoor environmental quality, driven by the growing amount of time people spend in enclosed spaces, this study presents an approach to enhancing air distribution in office environments and confined spaces. A novel low-induction air diffuser is designed to deliver fresh, clean air in close proximity to occupants while maintaining their thermal comfort. Clean, unpolluted air is pivotal to healthy and productive workplaces. Yet, this paper underscores the importance of not sacrificing thermal comfort in the pursuit of improved indoor air quality. Inadequate thermal comfort may lead occupants to deactivate ventilation systems, negating the benefits of improved air quality. Inefficient temperature control can also result in discomfort, distractions, and reduced productivity. The innovative low-induction air diffuser resolves this issue, enhancing air quality near occupants without causing thermal discomfort. By directing air gently and efficiently, this solution is prepared to transform personalized ventilation systems, mitigating the discomfort associated with traditional jet flows while delivering high-quality breathable air. This research serves as a bridge between improved indoor air quality and thermal comfort, for office environments. It introduces a practical, energy-efficient solution that satisfies the core requirements of a healthy workspace—clean air and comfortable conditions.

In the actual context of growing concerns over sustainability and energy efficiency, Phase Change Materials (PCMs) have gained attention as promising solutions for enhancing energy storage and release efficiency. On another hand, materials based on graphene oxide (GO) have proven antibacterial activity, biocompatibility, efficiency in microbial growth inhibition, and pollutant removal. Integrating nanoparticles into PCMs and creating Nano-Enhanced Phase Change Materials (NEPCMs) have opened new horizons for optimizing the performance of these systems and sustainable development. The key objective of this work is to gain insight into NECPMs, which are used in solar wall systems to enhance solar energy storage. Paraffin RT31 was mixed with Cu nanoparticles, graphene oxide (GO), and Cu-decorated GO (Cu@GO) at loading ratios ranging from 1% to 4% (w/w nanoparticles with respect to RT31). The compositions were characterized through Differential Scanning Calorimetry (DSC) and rheology tests. The decoration of the carbon-based nanoparticles was performed using the ultrasonication procedure, and the decoration efficiency was confirmed through X-ray Photoelectron Spectroscopy (XPS). The rheologic measurements were performed to correlate the flow behavior of the NEPCM with their composition at various temperatures. The study methodically investigated these composites' latent heat values, phase change peak temperatures, and solidification phase change temperatures. Compared to pure paraffin, the solidification of the formulations obtained using Cu@GO exhibits the largest increase in latent heat, with a 12.07% growth at a concentration of 2%. Additionally, at a 4% concentration of NEPCM, the largest increase in thermal conductivity was attained, namely 12.5%. [ABSTRACT FROM AUTHOR]

The global energy transition requires efficient seasonal energy storage systems (SESSs) to manage fluctuations in renewable energy supply and demand. This review focuses on advancements in SESSs, particularly their integration into solar district heating systems, highlighting their role in reducing greenhouse gas emissions and enhancing energy efficiency. Tanks are the most suitable solutions for seasonal storage, as they can be implemented regardless of location for volumes up to 100,000 m3. However, pits are the most optimal solutions in terms of cost and size, as they can be constructed for volumes up to 200,000 m3. This review analyses key performance indicators such as energy efficiency, cost-effectiveness, and environmental impact, drawing on case studies from countries like Denmark and Germany. Notable findings include Denmark's Silkeborg system, which supplies 22,000 households and reduces CO2 emissions by 15,000 tons annually. Challenges such as high initial costs and system maintenance remain, but coupling SESSs with heat pumps enhances thermal stratification within SESSs. This approach can reduce the annual cost by up to 9% and the purchase cost of energy by 23%. Future research should focus on innovative materials, system design optimization, and supportive policies to enhance adoption. In conclusion, advancing SESS technologies and integrating them into renewable energy systems is necessary for achieving sustainable energy solutions and mitigating climate change impacts. [ABSTRACT FROM AUTHOR]

The increasing concerns about CO2 emissions and climate change have pointed out the urgency of promoting sustainability in the building sector. One promising solution to enhance the energy efficiency of buildings and diminish environmental impact is the integration of phase-change materials (PCMs) into ventilated façade systems. This review article critically examines the current state of research on this innovative approach, with a particular focus on fire safety considerations. The paper explores the integration of PCM into ventilated façades, highlighting the potential for significant improvements in energy consumption, thermal comfort, and reductions in CO2 emissions. However, the flammability of PCMs introduces substantial fire safety challenges that must be addressed to ensure the safe application of this solution. The fire safety of both ventilated façades and PCMs is approached, followed by specific fire safety concerns when PCMs are integrated into ventilated façade systems. The conclusion states that while the integration of PCMs into ventilated façades offers substantial environmental benefits, attention to fire safety is essential. This necessitates the implementation of rigorous fire protection measures during the design and construction phases. By addressing both the environmental advantages and fire safety challenges, this review aims to provide a comprehensive understanding of the potential and limitations of PCM-integrated ventilated façades, offering valuable insights for researchers, engineers, and policymakers in the field of sustainable buildings. [ABSTRACT FROM AUTHOR]

Thermal comfort is very important for the well-being and safety of vehicle occupants, as discomfort can elevate stress, leading to distracted attention and slower reaction times. This creates a riskier driving environment. Addressing this, high-induction air diffusers emerge as a significant innovation, enhancing indoor environmental quality (IEQ) by efficiently mixing cool air from the heating ventilation and air conditioning (HVAC) system with the cabin's ambient air. This process ensures uniform airflow, diminishes temperature discrepancies, prevents draft sensations, and boosts overall air quality by improving air circulation. In addition to enhancing thermal comfort in vehicles, the novel air diffuser also offers significant potential for personalized ventilation systems, allowing for individualized control over airflow and temperature, thereby catering to the specific comfort needs of each occupant. This study introduces a novel air diffuser that demonstrates a 48% improvement in air entrainment compared to traditional diffusers, verified through Ansys Fluent simulations and laser Doppler velocimetry (LDV) measurements. At a fresh airflow rate of 31.79 m3/h, the total air entrainment rate at 0.6 m for the standard air diffuser is 73.36 m3/h, while for the innovative air diffuser, it is 109.26 m3/h. This solution has the potential to increase the level of thermal comfort and air quality within vehicles, and also signals potential applications across various enclosed spaces, underscoring its importance in advancing automotive safety and environmental standards. [ABSTRACT FROM AUTHOR]

The amount of time spent in traffic by vehicle occupants has increased dramatically over the last two decades. This is because the average commute length and time spent stuck in traffic without a way out have increased at rates far exceeding population growth. At the same time, the quality of life has increased, in many areas of this world, leading vehicle users to prefer increased thermal comfort conditions inside the cabins when they are in traffic, a better thermal comfort in the vehicle being nowadays an important parameter when choosing a new vehicle. A solution to improve the thermal comfort of vehicle users is to uniformize the airflow inside vehicle by enhancing the mixing of the freshly introduced air with the ambient air. Based on literature previous research, air mixing can be improved by passive means using innovative air diffusers which have the ability of entraining more air than regular air diffusers. A comparative numerical study between different air diffusers will be carried out in the present paper with the help of Ansys Fluent software. The results revealed that a particular air diffuser, based on the lobed shaped cross orifice was found to entertain with 35% more air than a regular air diffuser.

To improve building energy efficiency and address thermal storage challenges during periods without a heat source, such as cloudy weather or night-time, a range of solutions is required. Innovative technologies and sustainable practices are essential for combating climate change and reducing carbon emissions. This study primarily focuses on Thermal Energy Storage (TES) systems, specifically those using Phase Change Materials (PCMs), to increase energy efficiency for Transpired Solar Collectors used in buildings applications. During the last 30 years Transpired Solar Collectors (TSC) have been extensively investigated. However, a primary concern still exists regarding thermal storage when the heat source is unavailable, such as during periods of cloudy weather or at night. Thus, a Thermal Energy Storage (TES) system coupled with the TSC is a potential solution. In this study we are investigating using numerical simulation the arrangement of encapsulation for TES, integrating phase change materials (PCM) in spherical elements when compared with plate encapsulation elements. The model reproduces a part of a real scale thermal energy storage inserted in a Double Skin TSC. The model consists of a Plexiglas duct in which four different arrangements for the spherical encapsulated PCM were studied. For each of the arrangements the heat transfer between the TES elements and the air passing through the collector was analyzed. The primary finding of the study indicates that the hexagonal arrangement offers better passive airflow control, thus enhancing the heat transfer up to 12.3% compared to the rectangular arrangements [ABSTRACT FROM AUTHOR]

This study is a part of a larger experimental and numerical campaign intended to evaluate the influence of the turbulence intensity at the inlet of the terminal air distribution systems on the local draft sensation and thermal discomfort of ventilation users. In this paper we present preliminary results of CFD simulations using a realistic model of human body along with an experimental validation. The model is further used in a piston distribution scheme to evaluate the influence of turbulence intensity on the comfort indicators. The recorded velocity, turbulence and temperature fields allowed us to estimate the distributions of DR, PPD and PMV indexes. For the investigated case, the results indicated a direct correlation.

The present paper analyses the airflow through the lobed orifices of a transpired solar collector which acts as a solar ventilated facade element through numerical simulation. This study is part of a complex research project which analyses the implementation of phase changing materials within air solar collectors. We decided to study an elementary part of the collectors' absorbent plate with four equivalent orifices in order to obtain the velocity and temperature field at the outlet of the computing domain since the numerical simulation of the entire solar collector (more than 5000 orifices) is not feasible due to the big amount of computational resources and time needed. This paper presents the experimental validation of the numerical model, its final parameters and preliminary results. The numerical simulation was conducted using Ansys Fluent CFD software and the results were processed via Tecplot. The boundary conditions imposed were emphasised and k-ε RNG turbulence model was used according to the literature. After comparing the velocity profiles and temperature fields obtained with both experimental and numerical approaches we concluded that the numerical model reproduces real flow phenomena within acceptable limits. The numerical model thus obtained will be used in further studies in order to optimise the collectors' geometry and characteristics by means of parametrical analyses.