94,745 results on '"BIOCOMPATIBILITY"'
Search Results
2. Viability and Proliferation Assessment of Gingival Fibroblasts Cultured on Silver Nanoparticle-Doped Ti-6Al-4V Surfaces.
- Author
-
Vasilaki, Dimitra, Bakopoulou, Athina, Papadopoulou, Lambrini, Papachristou, Eleni, Michailidis, Nikolaos, Tsouknidas, Alexandros, Dratsios, Stergios, Taylor, Thomas, and Michalakis, Konstantinos
- Subjects
DENTAL implants ,FLUORESCENT dyes ,CELL proliferation ,GINGIVA ,ELECTRON microscopy ,CELL physiology ,FIBROBLASTS ,SILVER compounds ,BIOMEDICAL materials ,COLLOIDS ,CELL culture ,CELL survival ,CELL receptors ,ELECTROCHEMICAL analysis - Abstract
Purpose: To investigate the biocompatibility of silver nanoparticle (AgNP)-doped Ti-6Al-4V surfaces by evaluating the viability and proliferation rate of human gingival fibroblasts (HGFs)--as the dominant cells of peri-implant soft tissues-- seeded on the modified surfaces. Materials and Methods: AgNPs (sizes 8 nm and 30 nm) were incorporated onto Ti-6Al-4V specimen surfaces via electrochemical deposition, using colloid silver dispersions with increasing AgNP concentrations of 100 ppm, 200 ppm, and 300 ppm. One control and six experimental groups were included in the study: (1) control (Ti-6Al- 4V), (2) 8 nm/100 ppm, (3) 8 nm/200 ppm, (4) 8 nm/300 ppm, (5) 30 nm/100 ppm, (6) 30 nm/200 ppm, and (7) 30 nm/300 ppm. HGF cell primary cultures were isolated from periodontally healthy donor patients and cultured in direct contact with the group specimens for 24 and 72 hours. The cytotoxicity of AgNP-doped Ti-6Al-4V specimens toward HGF was assessed by the MTT (3-[4,5-dimethylthiazol-2-yl]-2,5-diphenyltetrazolium bromide) and BrdU (5-bromo-2'-deoxyuridine) assay tests. Calcein AM and ethidium homodimer (EthD-1) fluorescent stains were used to determine the live and dead cells. The morphology and attachment properties of the HGFs were determined via scanning electron microscopy (SEM). Results: Energy dispersive x-ray (EDX) analysis confirmed the presence of AgNPs on the specimens. The MTT test revealed that AgNPs of both sizes and all concentrations presented a decreased cellular metabolic activity compared to the control discs. All concentrations of both sizes of AgNPs affected the cell proliferation rate compared to the control group, as revealed by the BrdU assay. Overall, cytotoxicity of the modified Ti-6Al-4V surfaces depended on cell exposure time. Observation via confocal microscopy confirmed the results of the MTT and BrdU assay tests. Specifically, most cells remained alive throughout the 72-hour culture period. SEM images revealed that adjacent cells form bonds with each other, creating confluent layers of conjugated cells. Conclusions: The findings of the present study indicate that Ti-6Al-4V surfaces modified with 8 nm and 30 nm AgNPs at concentrations of 100 ppm, 200 ppm, and 300 ppm do not produce any serious cytotoxicity toward HGFs. The initial arrest of the HGF proliferation rate recovered at 72 hours. These results on the antibacterial activity against common periodontal pathogens, in combination with the results found in a previous study by the same research group, suggest that AgNP-doped Ti-6Al-4V surfaces are potential candidates for use in implant abutments for preventing peri-implant diseases. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
3. Design and fabrication of asymmetric Mach-Zehnder interferometers based on EpoClad and EpoCore strip waveguides.
- Author
-
Magalhães, Tiago E.C., Borme, Jérôme, Douglas, Temple, Maibohm, Christian, and Nieder, Jana B.
- Subjects
- *
OPTICAL interferometers , *OPTICAL waveguides , *SCALABILITY , *BIOCOMPATIBILITY , *MULTIDISCIPLINARY design optimization - Abstract
Integrated polymeric optical interferometers offer the possibility of developing sensors with low cost, scalability, and easy integration. Although they are not yet competitive with inorganic materials in terms of sensitivity, they have good biocompatibility in general, and suitable designs may provide sufficient sensitivity for biosensing. A new design for integrated Mach-Zehnder interferometers based on asymmetric arms with different widths has been proposed and experimentally demonstrated, avoiding the need for additional fabrication steps for an interaction window where biosamples are placed. The basic sensory principle is built upon the non-zero variation in the difference of the effective refractive index between the two arms due to their different dimensions, causing a phase variation in the output signal. In this work, we present a design optimization method and fabrication results by e-beam lithography for integrated asymmetric Mach-Zehnder interferometers based on strip waveguides made from EpoClad and EpoCore polymers. The operation wavelength was set to 650 nm. The optimization algorithm is based on open-source mode-solver simulations that return the optimal fabrication dimensions of the interferometer, avoiding high-order modes and enhancing single-mode confinement. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
4. Aqueous two-phase systems – versatile and advanced (bio)process engineering tools.
- Author
-
Jorge, Alexandre M. S. and Pereira, Jorge F. B.
- Subjects
- *
PRODUCTION engineering , *MATERIALS science , *BIOENGINEERING , *BIOCOMPATIBILITY , *EMULSIONS - Abstract
Aqueous two-phase systems (ATPS), also known as Aqueous Biphasic Systems (ABS), have been extensively studied as platforms for the separation and purification of biomolecules and other valuable compounds. These liquid–liquid extraction (LLE) systems have been a tool for biotechnology since its origin (Albertsson, 1950's), recently expanding to exciting fields such as health, biomedicine and material sciences. Due to their biocompatibility, amenability, flexibility, and versatility, ATPS have been applied across various research areas, addressing many challenges associated with conventional methodologies. In this feature article, we first discuss the fundamentals of ATPS and the molecular mechanisms that govern their formation and are crucial for their application. We then explore the most prominent and innovative applications of these systems in downstream processing. Additionally, we provide insights into the design of in situ upstream–downstream integrated platforms, and their use as pre-treatment and analytical tools. The latest advancements in ATPS applications within disruptive bioengineering and biotechnology fields are presented, along with their pioneering use in emerging scientific areas, such as the formation of all-aqueous (water-in-water) emulsions, microfluidic systems, and membrane-free batteries. Overall, this work underscores the transformative potential of ATPS in various branches of science, pinpointing directions for future research to fully explore and maximize ATPS capabilities, overcome existing hurdles, and drive innovation forward. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
5. Recent advances in sugar-based AIE luminogens and their applications in sensing and imaging.
- Author
-
Liu, Guang-jian, Zhang, Jing-dong, Zhou, Wei, Feng, Gai-li, and Xing, Guo-wen
- Subjects
- *
CELL imaging , *SUGAR , *SUGARS , *BIOCOMPATIBILITY , *CARBOHYDRATES - Abstract
Most fluorogens with aggregation-induced emission (AIE) characteristics are hydrophobic and most common sugars are hydrophilic and naturally nontoxic. The combination of AIEgens and sugars can construct glycosyl AIEgens with the advantages of good water-solubility, low fluorescent background and satisfactory biocompatibility. Based on the specific reaction or binding with analytes to change the conjugate system or restrict intramolecular motions, glycosyl AIEgens can be used as powerful tools for detecting bioactive molecules or imaging living cells. In this feature article, we summarize recent advances in sugar-based AIE luminogens and their applications in biosensing and imaging. The sugar units could significantly increase the solubility, biocompatibility, target activity, and chemical modifying capacity and often decrease the background fluorescence of the AIE probes. Corresponding studies not only expand the application fields of AIEgens but also provide effective tools for broad carbohydrate research. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
6. Enhanced vascularity in gelatin scaffolds via copper-doped magnesium–calcium silicates incorporation: In-vitro and ex-ovo insights.
- Author
-
Salahinejad, Erfan, Muralidharan, Avaneesh, Sayahpour, Forough Azam, Kianpour, Maryam, Akbarian, Mohsen, Vashaee, Daryoosh, and Tayebi, Lobat
- Subjects
- *
CHICKEN embryos , *CHORIOALLANTOIS , *REGENERATIVE medicine , *UMBILICAL veins , *ENDOTHELIAL cells , *BONE regeneration , *TISSUE scaffolds - Abstract
Addressing a critical challenge in current tissue-engineering practices, this study aims to enhance vascularization in 3D porous scaffolds by incorporating bioceramics laden with pro-angiogenic ions. Specifically, freeze-dried gelatin-based scaffolds were infused with sol-gel-derived powders of Cu-doped akermanite (Ca 2 MgSi2O 7) and bredigite (Ca 7 MgSi 4 O 16) at various concentrations (10, 20, and 30 wt%). The scaffolds were initially characterized for their structural integrity, biodegradability, swelling behavior, impact on physiological pH, and cytocompatibility with human umbilical vein endothelial cells (HUVECs). The silicate incorporation effectiveness in promoting vascularity was then assessed through HUVEC attachment, capillary tube formation, and ex-ovo chick embryo chorioallantoic membrane assays. The findings revealed significant improvements in both in-vitro and ex-ovo vascularity of the gelatin scaffolds upon the addition of Cu-doped akermanite. The most effective concentrations were determined to be 10 and 20 %, which led to notable HUVEC metabolic activity, a well-spread morphology with extensive peripheral filopodia and lamellipodia at 10 % and a cobblestone phenotype indicative of in-vivo endothelium at 20 % during cell attachment, the formation of complex networks of tubular structures, and robust vascularization in chick embryo development. Moving forward, the incorporation of Cu-doped akermanite into tissue-engineering scaffolds shows great potential for addressing the limitations of vascularization, especially for critical-sized bone defects, by facilitating the controlled release of pro-angiogenic and pro-osteogenic ions. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
7. Biomedical potential of green-engineered chitosan-magnesium oxide nanoparticles: An in vitro study on antibacterial and anticancer activities.
- Author
-
P, Edison Raj Godwin, I, Paul Ajith Kumar, Mathows, Jason, Govindasamy, Chandramohan, Al-Numair, Khalid S., Sana, Siva Sankar, Chandrasekaran, Karthikeyan, and Arulselvan, Palanisamy
- Subjects
- *
FIELD emission electron microscopy , *SCANNING transmission electron microscopy , *SUSTAINABLE engineering , *TRANSMISSION electron microscopy , *ESCHERICHIA coli - Abstract
The development of low-cost, highly effective, environmentally friendly, multi-functional bio-cidal substances has become a top priority in the current scenario. This study aimed to create low-cost materials, such as green-engineered magnesium oxide (GEMgO) and chitosan-coated magnesium oxide (GECsMgO) nanoparticles (NPs), using Chara zeylanica Klein ex Willd extract as a reducing agent. The X-ray diffraction results confirmed the cubic face-centered structure of the GEMgO and GECsMgO NPs. The field emission scanning electron microscopy and transmission electron microscopy results showed that GEMgO and GECsMgO NPs exhibit a spherical structure and nanoflakes with spherical structures, respectively. The Mg–O stretching frequencies were measured at 779 and 456 cm−1 for GEMgO and 543 cm−1 for GECsMgO NPs in the Fourier-transform infrared spectra. The oxygen vacancies responsible for the biocidal activities of GEMgO and GEC-MgO NPs were observed in their photoluminescence spectra at 501 and 520 nm and at 506 and 524 nm, respectively. The antioxidant activity of GEMgO and GECsMgO NPs was investigated using a DPPH assay. The GECsMgO NPs exhibited higher scavenging activity than the GEMgO NPs. Antibacterial studies on gram-negative bacteria treated with GEMgO and GECsMgO NPs showed that GECsMgO NPs exhibited the highest antibacterial activity. The ultrastructural morphological results of E. coli showed that GECsMgO NPs can damage it better than GEMgO NPs. An MTT assay determined that GEC-MgO NPs had better anticancer properties than GEMgO NPs when tested against a blood cancer cell line (MOLT-7). Fibroblast L929 cell toxicity tests showed that GEC-MgO NPs were less toxic than GEMgO NPs. In the future, GECsMgO NPs can be used as biocidal agents in clinical and industrial applications. • GEMgO and GECsMgO nanoparticles were synthesized using the Green Engineering method. • GECsMgO NPs exhibit higher antibacterial activity against gram-negative bacteria than GEMgO NPs. • GECsMgO NPs exhibit potential anticancer activity against blood cancer cell lines. • GECsMgO NPs were less harmful to fibroblast cells than GEMgO NPs. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
8. New Strategies for High Efficiency and Precision Bioprinting by DOE Technology and Machine Learning.
- Author
-
Dai, Chuyan, Sun, Yazhou, Zhang, Hangqi, Yuan, Zikai, Zhang, Bohan, Xie, Zhenwei, Li, Peixun, and Liu, Haitao
- Subjects
- *
BIOCOMPATIBILITY , *BIOPRINTING , *THREE-dimensional printing , *ETHYLENE glycol , *TISSUE engineering , *TISSUE scaffolds - Abstract
Extrusion‐based 3D printing technology is currently demonstrating considerable potential in the field of tissue engineering scaffolds, enabling the construction of in vitro models with complex structures and functions using a wide range of biomaterials and cells at a low cost. In recent years, researchers have spent considerable effort developing novel bio‐inks and employing a greater variety of cell sources to enhance biological compatibility and functionality. However, the majority of current bio‐ink materials are unprintable due to their low viscosity and long curing time, as well as insufficient shape fidelity before the secondary cross‐linking process. The study aims to bridge this gap by optimizing the material ratios and predicting the printing process before work. This article presents new strategies for the design, fabrication, and analysis of a new composite bio‐ink material. The optimal ink ratios are verified by a design of experiments (DOE) experimental design and evaluation metrics for printing printability (Pr) values. A machine learning model is used to predict the ink printing area and determine the printing process parameters. The influence mechanism of ink materials with different concentrations of poly (ethylene glycol) diacrylate (PEGDA) ratios on printed fibers is investigated. Finally, the optimal results are used as an example to demonstrate the printability of multilayer stents. Thus, the design approach allows for the rapid and cost‐effective exploration of novel ink ratios, while also providing higher fidelity and more accurate process metrics for the fabrication of tissue structures with multidimensional variables. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
9. Gold Nanoparticles‐Modified 2D Self‐Assembled Amphiphilic Peptide Nanosheets with High Biocompatibility and Photothermal Therapy Efficiency.
- Author
-
Xu, Youyin, He, Peng, Gu, Guanghui, Zhu, Danzhu, Luan, Xin, Mu, Rongqiu, and Wei, Gang
- Abstract
Amphiphilic peptides have garnered significant attention due to their highly designable and self‐assembling behaviors. Self‐assembled peptides hold excellent potential in various fields such as biosensing, environmental monitoring, and drug delivery, owing to their remarkable biological, physical, and chemical properties. While nanomaterials formed by peptide self‐assembly have found widespread use in biomedical applications, the development of 2D peptide nanosheets based on the self‐assembly of amphiphilic peptides remains challenging in terms of rational design and morphology modulation. In this study, rationally designed amphiphilic peptide molecules are self‐assembled into peptide nanosheets (PNS) under specific conditions to encapsulate gold nanoparticles (AuNPs), resulting in the formation of AuNPs/PNS hybrid materials with high photothermal conversion efficiency. The findings demonstrate that 2D PNS enhances the overall photothermal therapy effect of the nanohybrid materials due to their larger hosting area for AuNPs and higher biocompatibility. The well‐designed amphiphilic peptides in this study offer insights into the structural design and functional modulation of self‐assembled molecules. In addition, the constructed biomimetic‐functional 2D inorganic/organic nanohybrid materials hold potential applications in biomedical engineering. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
10. A Complementary Dual‐Mode Ion‐Electron Conductive Hydrogel Enables Sustained Conductivity for Prolonged Electroencephalogram Recording.
- Author
-
Su, Hengjie, Mao, Linna, Chen, Xiaoqi, Liu, Peishuai, Pu, Jiangbo, Mao, Zhuo, Fujiwara, Tomoko, Ma, Yue, Mao, Xinyang, and Li, Ting
- Subjects
- *
EVOKED potentials (Electrophysiology) , *HYALURONIC acid , *SKIN tests , *CELL survival , *BIOCOMPATIBILITY - Abstract
Conductive gel interface materials are widely employed as reliable agents for electroencephalogram (EEG) recording. However, prolonged EEG recording poses challenges in maintaining stable and efficient capture due to inevitable evaporation in hydrogels, which restricts sustained high conductivity. This study introduces a novel ion‐electron dual‐mode conductive hydrogel synthesized through a cost‐effective and streamlined process. By embedding graphite nanoparticles into ionic hyaluronic acid (HAGN), the hydrogel maintains higher conductivity for over 72 h, outperforming commercial gels. Additionally, it exhibits superior low skin contact impedance, considerable electrochemical capability, and excellent tensile and adhesion performance in both dry and wet conditions. The biocompatibility of the HAGN hydrogel, verified through in vitro cell viability assays and in vivo skin irritation tests, underscores its suitability for prolonged skin contact without eliciting adverse reactions. Furthermore, in vivo EEG tests confirm the HAGN hydrogel's capability to provide high‐fidelity signal acquisition across multiple EEG protocols. The HAGN hydrogel proves to be an effective interface for prolonged high‐quality EEG recording, facilitating high‐performance capture and classification of evoked potentials, thereby providing a reliable conductive medium for EEG‐based systems. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
11. Metasurface‐Embedded Contact Lenses for Holographic Light Projection.
- Author
-
Ko, Jiwoo, Kim, Gyeongtae, Kim, Inki, Hwang, Soon Hyoung, Jeon, Sohee, Ahn, Junseong, Jeong, Yongrok, Ha, Ji‐Hwan, Heo, Hyeonsu, Jeong, Jun‐Ho, Park, Inkyu, and Rho, Junsuk
- Subjects
- *
CONTACT lenses , *DISPLAY systems , *STRUCTURAL stability , *ELECTRONIC equipment , *HYALURONIC acid - Abstract
Contact lenses have been instrumental in vision correction and are expected to be utilized in augmented reality (AR) displays through the integration of electronic and optical components. In optics, metasurfaces, an array of sub‐wavelength nanostructures, have offered optical multifunctionality in an ultra‐compact form factor, facilitating integration into various imaging, and display systems. However, transferring metasurfaces onto contact lenses remains challenging due to the non‐biocompatible materials of extant imprinting methods and the structural instability caused by the swelling and shrinking of the wetted surface. Here, a biocompatible method is presented to transfer metasurfaces onto contact lenses using hyaluronic acid (HA) as a soft mold and to allow for holographic light projection. A high‐efficiency metahologram is obtained with an all‐metallic 3D meta‐atom enhanced by the anisotropy of a rectangular structure, and a reflective background metal layer. A corrugated metal layer on the HA mold is supported with a SiO2 capping layer, to avoid unwanted wrinkles and to ensure structural stability when transferred to the surface of pliable and wettable contact lenses. Biocompatible method of transferring metasurfaces onto contact lenses promises the integration of diverse optical components, including holograms, lenses, gratings and more, to advance the visual experience for AR displays and human‐computer interfaces. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
12. Current progress of protein-based dressing for wound healing applications – A review.
- Author
-
Khan, Muhammad Umar Aslam, Aslam, Muhammad Azhar, Rahman, Roselinda Ab, Abdullah, Mohd Faizal Bin, Mehmood, Azra, and Stojanović, Goran M.
- Subjects
- *
SKIN injuries , *MEDICAL technology , *WOUNDS & injuries , *BIOCOMPATIBILITY , *POLYMERS , *BIOLOGICAL dressings , *WOUND healing , *HEALING - Abstract
Protein-based wound dressings have garnered increasing interest in recent years owing to their distinct physical, chemical, and biological characteristics. The intricate molecular composition of proteins gives rise to unique characteristics, such as exceptional biocompatibility, biodegradability, and responsiveness, which contribute to the promotion of wound healing. Wound healing is an intricate and ongoing process influenced by multiple causes, and it consists of four distinct phases. Various treatments have been developed to repair different types of skin wounds, thanks to advancements in medical technology and the recognition of the diverse nature of wounds. This review has literature reviewed within the last 3–5 years—the recent progress and development of protein in wound dressings and the fundamental properties of an ideal wound dressing. Herein, the recent strides in protein-based state-of-the-art wound dressing emphasize the significant challenges and summarize future perspectives for wound healing applications. The graphical abstract illustrates different factors for protein-based dressing, wound healing phases, various responsive factors, and fundamental properties for an ideal wound dressing for wound healing applications. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
13. Revolutionizing Implantable Technology: Biocompatible Supercapacitors as the Future of Power Sources.
- Author
-
Chodankar, Nilesh R., Karekar, Smita V., Safarkhani, Moein, Patil, Amar M., Shinde, Pragati A., Ambade, Rohan B., Kim, Jang‐Kyo, Han, Young‐Kyu, Huh, Yun‐Suk, Ghaferi, Amal al, and Alhajri, Ebrahim
- Subjects
- *
HAZARDOUS substances , *FLAMMABLE materials , *ORGANS (Anatomy) , *ENERGY density , *ELECTRONIC equipment - Abstract
Almost all implantable electronic medical devices (IEMDs) are powered by bulky Li‐ion batteries (LIBs), limiting their miniaturization and lifespan advancements. In addition, LIBs contain toxic materials and flammable electrolytes that are dangerous if they leak into human organs. In this context, there is an urgent need to explore new approaches and concepts that can address the critical challenges of designing novel electrochemical energy storage systems and gain a mechanistic understanding of the phenomena taking place in diverse scenarios. This review summarizes recent advancements in biocompatible supercapacitors (B‐SCs) as a power source for various IEMDs, offering a potential solution to these challenges. Different types of IEMDs and their power requirements are briefly discussed, along with challenges arising from energy storage systems and their applications in IEMDs. Given the importance of electrode materials in determining the electrochemical performance of B‐SCs in terms of energy and power densities, different electrode materials and their developments are systematically reviewed. Finally, new insights are offered into potential opportunities and future prospects for the rational design of next‐generation B‐SCs. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
14. Fabrication and characterization of hydroxyapatite coatings on anodized magnesium alloys by electrochemical and chemical methods intended for biodegradable implants.
- Author
-
Li, Xiaopei, Lin, Erli, Wang, Kaixuan, Ke, Rongguo, Kure-Chu, Song-Zhu, and Xiao, Xiufeng
- Subjects
- *
SCANNING electrochemical microscopy , *COMPOSITE coating , *BIOABSORBABLE implants , *SURFACE morphology , *SCANNING electron microscopy , *HYDROXYAPATITE coating , *MAGNESIUM alloys - Abstract
The fabrication of hydroxyapatite (HAP)/MgO composite coatings on Mg alloy is crucial for enhancing the corrosion resistance and biocompatibility of biomedical implants. In this study, we aimed to investigate the effects of two different surface modification methods, i.e., electrochemical (electrodeposition, ED) and chemical (solution treatment, ST), on the phase structure, degradation properties, and biocompatibility of the composite coatings in comparison to the anodized coating. The surface morphologies and crystalline structures of the coatings were characterized by scanning electron microscopy (SEM) and X-ray diffraction (XRD). Subsequently, the degradation rate of the coatings in simulated body fluid were comprehensively evaluated by using electrochemical impedance spectroscopy (EIS), potentiodynamic polarization and scanning electrochemical microscopy (SECM) tests. Additionally, in-vitro cell proliferation assays were employed to quantitatively assess the biocompatibilities of the coatings. The results showed that both ED and ST methods were effective in depositing HAP on anodized Mg alloy, resulting in different surface morphologies with hydroxyapatite layer thicknesses of 2.71 μm and 3.56 μm, respectively. In this way, the HAP-deposited coatings exhibited improved corrosion resistances and biocompatibilities compared with those of the anodized coating. Specifically, the ST-deposited composite film displayed superior degradability and biocompatibility which was attributed to its filiform surface morphology and thicker HAP layer. Overall, the present study demonstrates the potential of HAP/MgO composite coatings for biomedical applications, with implications for the development of advanced implant materials with improved performance and biocompatibility. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
15. In vitro determination of genotoxicity and cytotoxicity induced by stainless steel brackets with and without surface coating in cultures of oral mucosal cells.
- Author
-
Ahuja, Dhruv, Jose, Nidhin Philip, Kamal, Rozy, Panduranga, Vinaya, Nambiar, Supriya, and Isloor, Arun M.
- Subjects
POLYMER analysis ,MATERIALS testing ,IN vitro studies ,EPITHELIAL cells ,GINGIVA ,ELECTRON microscopy ,ORAL mucosa ,IMMUNODIAGNOSIS ,DESCRIPTIVE statistics ,CELL culture ,MUTAGENICITY testing ,ORTHODONTIC appliances ,FIBROBLASTS ,BIOMEDICAL materials ,ONE-way analysis of variance ,CELL surface antigens ,STAINLESS steel ,NANOPARTICLES ,CELL receptors - Abstract
Background: Orthodontics is a speciality of dentistry that uses a plethora of devices made from myriad materials to manage various malocclusions. Prolonged contact of orthodontic appliances with oral tissues can lead to cellular damage, highlighting the need for biocompatible materials to mitigate health risks. Objectives: To analyze the genotoxicity and cytotoxicity produced by metal brackets and coated metallic brackets with polymeric and nanoparticle coatings in oral mucosal cells. Materials & methods: The current study compares the toxicity of 3 different types of orthodontic brackets with control groups of oral mucosal cells. Each of the three treatment groups consisted of 10 samples of orthodontic brackets: stainless steel brackets(Group 1), nanoparticle-coated brackets(Group 2), and polymeric-coated brackets(Group 3) exposed to corrosion eluates employing an oral biomimicry model. Two types of oral mucosal cells- Human Gingival Fibroblasts and Buccal Epithelial Cells were used to study the cytotoxic and/or genotoxic effects of the elutes. Intergroup comparisons were conducted using one-way analysis of variance, while scanning electron microscopy evaluated surface characteristic. Results: The interaction between metal ions and oral mucosal cells showed no statistically significant difference for toxicity assays between the three groups(p > 0.005). However, polymeric and nanoparticle-coated groups showed reduced cellular differentiation when compared with conventional stainless-steel brackets. Conclusion: This in-vitro study shows that polymeric or nanoparticle coating of conventional metal brackets aids in enhancing corrosion-resistant characteristics of orthodontic appliances and reduces the toxic oral environment created by metal release in the oral cavity. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
16. Microstructural and biological characterization of 3D printed PEEK scaffolds coated with alginate/CNT for bone regeneration applications.
- Author
-
Fatemi, Afshin and Biglari, Farid Reza
- Subjects
MICROSTRUCTURE ,POLYETHER ether ketone ,BONE regeneration ,BONE remodeling ,THREE-dimensional printing - Abstract
The main aim of bone tissue engineering is to develop novel scaffold structures that integrate biological functionality with sufficient mechanical strength and properties. In this study, bone scaffolds were fabricated using polyether ether ketone (PEEK) via 3D printing, resulting in three different porous designs. To enhance their biological attributes, these scaffolds were coated with an alginate and carbon nanotube (CNT) composite using a freeze-drying technique. The biological characteristics of fabricated samples, such as biocompatibility and bioactivity, were evaluated in simulated body fluid (SBF). Field emission scanning electron microscopy (FE-SEM) analysis showed that the 3D-printed PEEK scaffolds had a porous, uniform, and interconnected architecture with pore sizes between 321–378 µm. Energy-dispersive X-ray spectroscopy (EDS) and X-ray diffraction (XRD) confirmed the formation of hydroxyapatite (HA) and bioactive calcium phosphate (Ca-P) on the scaffold surfaces, indicating their bioactivity. Cell biocompatibility was assessed using the MTT assay, which revealed a high cell viability rate of approximately 97% and no significant toxicity. Consequently, the 3D-printed PEEK scaffold coated with Alginate/0.3%wt CNT demonstrated promising microstructure, bioactivity, and biocompatibility, making it suitable for bone tissue regeneration. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
17. RGD-based self-assembling nanodrugs for improved tumor therapy.
- Author
-
Bin Wang, Dongmei Tang, Jianqiao Cui, Hongfei Jiang, Jing Yu, and Zhu Guo
- Subjects
CANCER treatment ,IMMUNE response ,PEPTIDES ,INTEGRINS ,BIOCOMPATIBILITY - Abstract
RGD-based self-assembling nanodrugs are a promising advancement in targeted cancer therapy, combining the specificity of RGD peptides with the benefits of nanotechnology. These nanodrugs enhance tumor targeting and cellular uptake while reducing off-target effects. RGD peptides facilitate the self-assembly of stable nanostructures, ensuring efficient drug delivery. Despite their potential, challenges such as immunogenicity, stability, tumor heterogeneity, and manufacturing scalability need to be addressed. Future research should focus on improving biocompatibility, advanced targeting strategies, personalized medicine approaches, and innovative manufacturing techniques. Overcoming these challenges will pave the way for the successful clinical translation of RGDbased nanodrugs, offering more effective and safer cancer treatments. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
18. Influence of amine chain extenders on morphology and performances of poly(dimethylsiloxane) based poly(urea‐urethane) elastomers.
- Author
-
Ge, Shang, Zhu, Youzhi, Zhu, Yun, Wang, Guiyou, Chen, Guoming, Liu, Shihong, and Ye, Ping
- Subjects
TENSILE strength ,POLYURETHANES ,ISOPHORONE ,BIOCOMPATIBILITY ,MORPHOLOGY ,POLYURETHANE elastomers - Abstract
The structure, morphology, and performance of polyurethanes are greatly influenced by the structure of chain extenders. In this study, two types of amine chain extenders, 1,3‐bis(3‐aminopropyl)‐1,1,3,3‐tetramethyldisiloxane (BAPD) and isophorone diamine (IPDA), were utilized in the synthesis of poly(dimethylsiloxane) (PDMS)‐based poly(urea‐urethane) elastomers (PDMS‐PUUs). The mechanical properties, morphology, and in vitro oxidative stability of the as‐prepared elastomers were controlled by altering the ratio of BAPD and IPDA. The results indicate that the overall phase mixing of PDMS‐PUUs improves after incorporating of BAPD into the hard segments. The hard segment, composed of IPDA with a rigid structure, plays a crucial role in maintaining the essential mechanical properties of the PDMS‐PUUs. Furthermore, PDMS‐PUUs based on mixed chain extenders exhibit relatively high boundary diffuseness and boundary thickness. Especially, the PDMS‐PUU sample synthesized from BAPD and IPDA with a molar ratio of 1/1 features the highest boundary diffuseness (0.094) and boundary thickness (0.395 nm), consequently displaying some remarkable properties, including enhanced cyclic tensile properties, superior strain recovery (92.6%), a low modulus (8.6 MPa), and high tensile strength (20.3 MPa). PDMS‐PUUs also exhibit good oxidative stability and biocompatibility, implying that the as‐prepared PDMS‐PUUs are proven to be biostable and capable of long‐term implantation. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
19. Poly(vinyl alcohol)/polyacrylamide double‐network ionic conductive hydrogel strain sensor with high sensitivity and high elongation at break.
- Author
-
Wu, Zijian, Liu, Xiaorui, Xu, Qi, Zhang, Liying, Abdou, Safaa N., Ibrahim, Mohamed M., Zhang, Jing, El‐Bahy, Zeinhom M., Guo, Ning, Gao, Junguo, Weng, Ling, and Guo, Zhanhu
- Subjects
STRAIN sensors ,TENSILE strength ,WEARABLE technology ,HYDROGELS ,BIOCOMPATIBILITY - Abstract
As a soft material with biocompatibility and stimulation response, ionic conductive hydrogel‐based wearable strain sensors show great potential across a wide spectrum of engineering disciplines, but their mechanical toughness is limited in practical applications. In this study, freeze‐thawing techniques were utilized to fabricate double‐network hydrogels of poly(vinyl alcohol)/polyacrylamide (PVA/PAM) with both covalent and physical cross‐linking networks. These double‐network hydrogels demonstrate excellent mechanical performance, with an elongation at break of 2253% and tensile strength of 268.2 kPa. Simultaneously, they also display a high sensitivity (Gage factor, GF = 2.32 at 0%–200% strain), achieve a rapid response time of 368 ms without the addition of extra conductive fillers or ions, stable signal transmission even after multiple cycles, and fast response to human motion detection. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
20. Ferulic acid and human platelet lysate incorporated alginate dialdehyde‐gelatin 3D (bio)printable hydrogels with biological activity.
- Author
-
Bider, Faina, Klotschan, Artem, Kuth, Sonja, Weisbach, Volker, and Boccaccini, Aldo R.
- Subjects
SCHIFF bases ,BIOPRINTING ,FERULIC acid ,HYDROGELS ,ALGINIC acid - Abstract
This study investigates the creation of multifunctional scaffolds based on alginate dialdehyde (ADA) and gelatin (GEL) incorporating ferulic acid (FA), a phytotherapeutic agent with diverse pharmacological properties, and human platelet lysate (HPL). The multimaterial hydrogels were characterized in terms of degradation/swelling behavior showing that HPL decelerates the degradation process of ADA‐GEL hydrogels in absence of FA. A FA release study confirmed that the presence of HPL does not affect the FA release ability of ADA‐GEL hydrogel. A trinitrobenzenesulfonic acid (TNBS) assay confirmed no influence of HPL on the Schiff's base formation. The addition of HPL was shown to lead to a decrease in stiffness, mechanical stability, and viscosity of ADA‐GEL‐HPL inks. This effect was also observed for ADA‐GEL‐HPL inks when investigating their three‐dimensional (3D) printing ability. Cytocompatibility tests and a 3D bioprinting study confirmed the beneficial impact of the addition of HPL on MC3T3‐E1 cells. Moreover, an antibacterial effect provided by the addition of FA was confirmed while the incorporation of HPL led to higher VEGF‐A expression by MC3T3‐E1 cells. Overall, the addition of HPL and FA to ADA‐GEL hydrogel results in a promising ink, which has potential for future biofabrication applications. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
21. A NH2-Cu-MOF for promising antibacterial application.
- Author
-
Li, Zhenxi, Cheng, Jing, Xie, Zhixin, and Chen, Linlin
- Subjects
- *
ESCHERICHIA coli , *GRAM-negative bacteria , *METAL-organic frameworks , *ANTIBACTERIAL agents , *BIOCOMPATIBILITY , *GRAM-positive bacteria - Abstract
A copper-based metal-organic framework named NH2-Cu-MOF has been synthesized and utilized as an effective broad-spectrum antimicrobial material in this article. The obtained NH2-Cu-MOF exhibits satisfying antibacterial activity against both gram-positive bacteria (S. aureus and S. epidermidis) and gram-negative bacteria (E. coli and K. peneumoniae). Additionally, the biocompatibility of this NH2-Cu-MOF has been validated through animal studies, showing no significant adverse effects, thereby confirming its high biocompatibility. These findings prove that NH2-Cu-MOF has positive effects upon the treatment of bacteria-infected wounds, which holds great potential to be applied in biochemistry field. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
22. Examining the relationship between subjective exercise tolerance and psychophysiological reactivity during physical stress.
- Author
-
Bigliassi, Marcelo, Antonio, Dayanne S., Celoch, Kamil, and Krause, Maressa P.
- Subjects
- *
EXERCISE tolerance , *RESPONSE inhibition , *HEART beat , *BIOCOMPATIBILITY , *HEART rate monitors - Abstract
It has been hypothesized that one's ability to control impulses aids in sustaining effort despite experiencing painful physical sensations. Physical exercise has been used extensively as an intervention to strengthen the inhibitory control system and protect an individual's cognitive plan of action. It is unclear, however, whether the high levels of exercise tolerance could facilitate inhibitory control under varied stressors. The present study explored the relationship between subjective exercise tolerance and psychophysiological characteristics that indicate reactivity capacity when exposed to the cold pressor test. Thirty‐six participants were divided into two groups based on their subjective exercise tolerance profiles. During the test, participants' psychophysiological reactivity was monitored via heart rate variability. Participants were also required to answer questions about their perceptual and affective states at the beginning and immediately after the stress test. The study revealed insights into dominance perception and emotional states among individuals with varying subjective exercise tolerance levels. High‐tolerant individuals endured physical discomfort longer (~50 s) and exhibited higher perceived dominance at the outset of the test when compared to their low‐tolerant counterparts. Despite differences in task performance, both groups experienced more positive affective states post‐task, potentially as a result of a heightened sense of self‐accomplishment. Notably, both groups showed similar levels of psychophysiological reactivity, suggesting a protective effect of physical tolerance on ensuing biological responses. Overall, this study sheds light on the complex relationship between exercise tolerance, dominance perception, and psychophysiological reactivity during physically demanding tasks, enriching our understanding of how developing physical tolerance may impact inhibitory control under stress. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
23. The Predictive Synthesis of Monodisperse and Biocompatible Gold Nanoparticles.
- Author
-
Frickenstein, Alex N., Means, Nathan, He, Yuxin, Whitehead, Luke, Harcourt, Tekena, Malik, Zain, Sheth, Vinit, Longacre, Logan, Taffe, Haley, Wang, Lin, McSpadden, Isabella, Baroody, Connor, Yang, Wen, Zhao, Yan D., and Wilhelm, Stefan
- Abstract
The predictive bottom-up synthesis of monodisperse and biocompatible gold nanoparticles using seed-mediated growth procedures is limited by a lack of mathematical models relating reaction components to the final nanoparticle diameter. In this study, we used unique quantitative analytical methods at the single-nanoparticle level to identify the mathematical relationship between the moles of precursor ionic gold and the moles of nanoparticle seeds to synthesize monodisperse gold nanoparticles within ∼5% of the target diameter in the ∼10 to 120 nm size range. We investigated two commonly used gold nanoparticle syntheses, i.e., the formation of (i) citrate-coated, and (ii) cetyltrimethylammonium chloride (CTAC)-coated gold nanoparticles. Additionally, we developed a surface engineering approach using a physical replacement method that replaces cytotoxic CTAC with biocompatible citrate moieties. We confirmed the successful surface removal of CTAC using several analytical methods and demonstrated biocompatibility with cell viability tests. Our study provides tools and methods by which monodisperse and biocompatible gold nanoparticles can be predictably synthesized for potential downstream biomedical applications. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
24. Antimicrobial Efficacy of Cubic, Single-Leaf, and Flower-like Zeolitic Imidazolate Frameworks.
- Author
-
Zhang, Yanning, Cai, Shixin, Li, Xinzhang, Zhang, Linpei, Li, Menglu, Zhang, Yuting, Wang, Xiaoli, and Zhou, Nandi
- Abstract
Zeolite imidazolate frameworks (ZIFs) have been widely used in drug delivery and antibacterial applications due to their highly controllable structure and pore size. However, the relationship between the structure of ZIFs and their antibacterial efficacy has not been fully elucidated. In this study, three ZIFs with uniform sizes and specific morphologies were synthesized: cubic (Z-8), leaf-like (Z-L), and flower-like (FZ-L). Flow cytometry was employed to assess the effects of these materials on Bacillus subtilis and Escherichia coli at different concentrations and exposure times. Results showed that sharp-edged ZIFs possess enhanced antibacterial effects. Specifically, FZ-L exhibited the lowest minimum inhibitory concentration of 400 μg/mL and a minimum bactericidal concentration of 20 μg/mL, which can kill bacteria effectively and rapidly. Further study on the antibacterial mechanisms showed that these materials do not produce reactive oxygen species (ROS) themselves but induce ROS production in bacteria and accelerate bacterial death. Biocompatibility studies suggested that ZIFs have minimal toxicity to human cells, indicating their potential in biomedical applications. This research provides insights into the antibacterial mechanisms of ZIFs, which can support their development for antimicrobial use. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
25. The impact of the physicochemical properties of calcium phosphate ceramics on biocompatibility and osteogenic differentiation of mesenchymal stem cells.
- Author
-
Skliarenko, Yuliia, Kolomiiets, Volodymyr V., Balatskyi, Volodymyr V., Galuza, Yuliia, Koryak, Oksana S., Macewicz, Larysa L., Ruban, Tetiana P., Firstov, Sergey A., Ulianchych, Nataliia. V., and Piven, Oksana O.
- Subjects
- *
MESENCHYMAL stem cell differentiation , *CALCIUM phosphate , *BONE regeneration , *ALKALINE phosphatase , *CELL adhesion - Abstract
Objective: In this study we have focused on biocompatibility and osteoinductive capacity analysis of self-manufactured single-phase (HAP) and two-phase (HAP and β-ТСР) bioactive ceramics with various chemical modifications (Fig. 1). Results: We demonstrate a reduction in solubility for all analyzed composite after the treatment with H2O and H2O2, accompanied by an enhancement in adsorption activity. This modification also resulted in an increase in micro- and macroporosity, along with a rise in the open porosity. Adipose-derived mesenchymal stromal cells demonstrated excellent cell adhesion and survival when cultured with these ceramics. Calcium phosphate ceramics (H-500, HT-500, and HT-1 series) stimulated alkaline phosphatase expression, promoted calcium deposition, and enhanced osteopontin expression in ADSCs, independently inducing osteogenesis without additional osteogenic stimuli. These findings underscore the promising potential of HAP-based bioceramics for bone regeneration/reconstruction. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
26. Biocompatibility analysis of titanium bone wedges coated by antibacterial ceramic-polymer layer.
- Author
-
Kazek-Kęsik, Alicja, de Carrillo, Daria Gendosz, Maciak, Weronika, Taratuta, Anna, Walas, Zuzanna, Matak, Damian, and Simka, Wojciech
- Subjects
- *
SURFACE preparation , *SURFACE tension , *CONTACT angle , *ELECTROLYTIC oxidation , *MICE - Abstract
This paper presents the surface treatment results of titanium, veterinary bone wedges. The functional coating is composed of a porous oxide layer (formed by a plasma electrolytic oxidation process) and a polymer poly(sebacic anhydride) (PSBA) layer loaded with amoxicillin (formed by dip coatings). The coatings were porous and composed of Ca (4.16%-6.54%) and P (7.64%-9.89% determined by scanning electron microscopy with EDX) in the upper part of the implant. The titanium bone wedges were hydrophilic (54° water contact angle) and rough (surface area (Sa):1.16 μm) The surface tension determined using diiodomethane was 68.6 ± 2.0° for the anodized implant and was similar for hybrid coatings: 60.7 ± 2.2°. 12.87 ± 0.91 µg/mL of amoxicillin was released from the implants during the first 30 min after immersion in the phosphate-buffered saline (PBS) solution. This concentration was enough to inhibit the Staphylococcus aureus ATCC 25923, and Staphylococcus epidermidis ATCC12228 growth. The obtained inhibition zones were between 27.3 ± 2.1 mm–30.7 ± 0.6 mm when implant extract after 1 h or 4 h immersion in PBS was collected. Various implant biocompatibility analyses were performed under in vivo conditions, including pyrogen test (3 rabbits), intracutaneous reactivity (3 rabbits, 5 places by side), acute systemic toxicity (20 house mice), and local lymph node assay (LLNA) (20 house mice). The extracts from implants were collected in polar and non-polar solutions, and the tests were conducted according to ISO 10993 standards. The results from the in vivo tests showed, that the implant's extracts are not toxic (mass body change below 5%), not sensitizing (SI < 1.6), and do not show the pyrogen effect (changes in the temperature 0.15ºC). The biocompatibility tests were performed in a certificated laboratory with a good laboratory practice certificate after all the necessary permissions. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
27. Titania Doped CDs as Effective CT‐DNA Binders: A Novel Fluorescent Probe via Green Synthesis.
- Author
-
W. N, Namrata, Joseph, Neethu, Varghese, Nikita, Varghese, Meera, K. S, Sreehari, Joy, Francis, Nair, Yamuna, and B, Manoj
- Abstract
Carbon dots (CDs), which belong to the class of zero‐dimensional carbon‐based nanomaterials, have garnered significant interest owing to their wide array of applications spanning from the electronics industry to the healthcare sector. This work employs a facile, inexpensive approach to synthesize green luminescent carbon dots (J‐10) from a potential medicinal plant named Justicia Wynaadensis by the one‐step hydrothermal method. A nanocomposite (JT‐10) of the CDs is prepared by adding TiO2 nanoparticles derived from green synthesis of Lavandula leaves. The J‐10 and JT‐10 are further characterized by X‐ray Diffraction spectroscopy (XRD), Transmission Electron Microscopy (TEM), Raman analysis X‐ray Photoelectron Spectroscopy (XPS), and Fourier transform infrared techniques (FTIR), UV–vis spectroscopy, Photoluminescence (PL), and Fluorescence or PL lifetime analysis. The average size of synthesized CDs is 1.85 nm and exhibits an excitation‐dependent fluorescence nature at 320 nm. PL lifetime analysis of J‐10 and JT‐10 is calculated to be 5.80 and 2.84 ns respectively. Offering these unique optical properties and biocompatibility, the synthesised material is suitable for investigating their binding affinity and interaction mechanisms with DNA. The use of JT‐10 in DNA binding studies contributes to the development of sustainable and efficient nanomaterials for applications in biosensors, drug delivery, and gene therapy. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
28. Utilization of Polymers for the Development of Nanomaterials.
- Author
-
Chandra, Phool, Rastogi, Vaibhav, Porwal, Mayur, Saxena, Urvashi, Verma, Anurag, Fatma, Nishat, Ali, Zeeshan, and Sachan, Neetu
- Subjects
- *
BIOPOLYMERS , *POLYMER clay , *CARBON composites , *POLYMERIC nanocomposites , *SUSTAINABILITY - Abstract
This study highlights the significance of polymers in the progress of nanoparticles across various areas. The molecules of polymers are highly regarded for their ability to adapt and self‐assemble, making them essential components in the creation of nanomaterials. The variety of polymers include natural polymers such as chitosan, synthetic polymers like polyethylene, and biodegradable polymers like poly(lactic‐co‐glycolic acid) (PLGA). These kinds of polymers possess distinct advantages such as high strength, environmental sustainability, and biocompatibility. Incorporation of nanoscale fillers into polymer matrices, which enhances the mechanical, thermal, and electrical properties of materials, is crucial for the development of nanocomposites. Illustration instances encompass carbon nanotube‐polymer composites and polymer clay hybrids, which find application in the construction, automotive, and aerospace sectors. Composites can employ many synthetic methods to generate nanostructures. Nanofibers have utility in tissue engineering, whereas polymer nanoparticles function as carriers for medical delivery. Also, polymers enhance nanomaterials by modifying their surfaces, a crucial factor for their application in membrane technology, catalysis, and sensing. A collaborative synergy between polymers and nanoparticles fosters a wide range of applications, showcasing the versatility and potential of polymers in altering the characteristics of nanomaterials. The resulting partnership continues to generate pioneering breakthroughs that address complex challenges and unveil unprecedented prospects in the domains of science, technology, and business. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
29. Collagen Membrane as Artificial Dura Substitute: A Comprehensive In Vivo Study of Efficiency and Substitution Compared to Durepair.
- Author
-
Mai, Roni, Osidak, Egor, Mishina, Ekaterina, Domogatsky, Sergey, Andreev, Andrey, Dergam, Youssef, and Popov, Vladimir
- Subjects
- *
MAGNETIC resonance imaging , *DURA mater , *ARTIFICIAL membranes , *ELECTRON microscopy , *SYMPTOMS - Abstract
The dura mater is a barrier between the brain and the surrounding environment. Injuries to the dura can lead to serious complications, therefore, ensuring a hermetic closure of the dura is a primary task for a neurosurgeon. The aim of the study is to compare the effectiveness of applying the newly developed ViscollDURA collagen membrane (VDCM), with the commercially available Durepair (xenogeneic collagen) in animal model. A dural tear model was utilized in rats with membrane implantation using an application method. The sample size consisted of 24 rats. Group I underwent VDCM implantation, while Group II underwent Durepair implantation. Results were evaluated at 30, 60, and 90 days. The study was assessed using magnetic resonance imaging, histology, electron scanning microscopy, and immunohistochemistry. The obtained results underwent statistical analysis. In the clinical presentation, there were no difference between groups. Histologically, Group 1 showed comparable results to Group 2. The integration process of the membrane statistically differed between the groups. In Group 1, neovascularization and tissue replacement showed better results than in Group 2. Magnetic resonance imaging differences were observed at later stages, with group 2 showing adhesion and brain deformation in the implantation area. Both membranes showed safety and compatibility. The collagen membrane produced under sterile conditions demonstrated better regeneration with minimal inflammatory reaction. The study suggests that VDCM exhibits biocompatibility comparable to Durepair, providing prospects for potential applications in neurosurgery. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
30. Synthesis and Viscoelastic Properties of Polycaprolactone/Polyvinylidene Fluoride/Nanohydroxyapatite Composite Scaffolds.
- Author
-
Yeganeh Kari, Ali, Nezhadfard, Mahla Sadat, Montazeri, Arash, and Pishvaei, Malihe
- Subjects
- *
POLYVINYLIDENE fluoride , *SCANNING electron microscopy , *TISSUE engineering , *CELL adhesion , *CONTACT angle - Abstract
Obtaining a polymer nanocomposite with optimum viscoelastic, thermal, and biocompatibility properties is the main objective when designing nanocomposite systems with potential applications in tissue engineering. For this purpose, a blend of Polycaprolactone (PCL) and Polyvinylidene fluoride (PVDF) in an 85/15 weight ratio, along with a nanocomposite reinforced by nanohydroxyapatite (nHA) particles, is fabricated using a solution casting method in a mold. The impact of nHA content on crystallinity, viscoelastic properties, thermal stability, and the properties–structure relationship of nanocomposites is evaluated using scanning electron microscopy (SEM). Dynamic mechanical thermal (DMTA) analysis is used to determine the William–Landel–Ferry (WLF) constants and the effect of nHA on the nanocomposite's viscoelastic behavior. The PCL/15PVDF/0.5 wt% nHA exhibits the maximum thermal stability (40% residual char value) and 95% increase in storage modulus at 90 °C (rubbery region) in comparison with PCL/15PVDF blend. Water contact angle (WCA) and biocompatibility tests are conducted on the PCL/15PVDF blend and nanocomposite scaffolds to design appropriate nanocomposite systems with potential applications in tissue engineering. The high hydrophilic properties are assigned to PCL/15PVDF/0.5 wt% nHA with a WCA of 67.5°. Finally, in vitro cell culture confirmed 0.5 wt% nHA significantly improves cell adhesion and cytotoxicity with MG‐63 cells. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
31. From Bioink to Tissue: Exploring Chitosan-Agarose Composite in the Context of Printability and Cellular Behaviour.
- Author
-
Mania, Szymon, Banach-Kopeć, Adrianna, Maciejewska, Natalia, Czerwiec, Katarzyna, Słonimska, Paulina, Deptuła, Milena, Baczyński-Keller, Jakub, Pikuła, Michał, Sachadyn, Paweł, and Tylingo, Robert
- Subjects
- *
BIOPOLYMERS , *BIOPRINTING , *BENCH press , *CHICKEN embryos , *TISSUE engineering , *SKIN regeneration - Abstract
This study presents an innovative method for producing thermosensitive bioink from chitosan hydrogels saturated with carbon dioxide and agarose. It focuses on a detailed characterisation of their physicochemical properties and potential applications in biomedicine and tissue engineering. The ORO test approved the rapid regeneration of the three-dimensional structure of chitosan–agarose composites in a unidirectional bench press simulation test. The diffusion of dyes through the chitosan–agarose hydrogel membranes strongly depended on the share of both polymers in the composite and the molecular weight of the dyes. Glucose, as a nutrient marker, also diffused through all membranes regardless of composition. Biocompatibility assessment using MTT tests on 46BR.1N fibroblasts and HaCaT keratinocytes confirmed the safety of the bioink. The regenerative potential of the bioink was confirmed by efficient cell migration, especially HaCaT. Long-term viability studies showed that chitosan–agarose scaffolds, unlike the agarose ones, support cell proliferation and survival, especially 14 days after bioink extrusion. Experiments in a skin wound model in mice confirmed the biocompatibility of the tested dressing and the beneficial action of chitosan on healing. Studies on vessel formation in chicken embryos highlight the potential of the chitosan–agarose composition to enhance proangiogenic effects. This composition meets all entry criteria and possesses excellent biological properties. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
32. Smooth Operator: Nanotextured Breast Tissue Expanders Are Associated with Lower Rates of Capsular Contracture.
- Author
-
Catic, Armin, Weinzierl, Andrea, Heimer, Jakob, Pompei, Barbara, and Harder, Yves
- Subjects
- *
ANAPLASTIC large-cell lymphoma , *SURGICAL complications , *MASTECTOMY , *BREAST implants , *MAMMAPLASTY , *RETROSPECTIVE studies , *BIOCOMPATIBILITY - Abstract
Background: Continuous research on breast implant-associated anaplastic large cell lymphoma (BIA-ALCL) has introduced a focus on surface texturizations and a shift towards smooth breast devices, yet outcomes comparing the complication profiles of differently textured tissue expanders (TEs) remain conflicting. The study aim was to compare the complication profile of a new nanotextured and MRI-compatible TE to micro- and macrotextured TEs and to identify possible predictors for complications. Methods: A retrospective analysis of women undergoing expander-based breast reconstruction after mastectomy between January 2016 and March 2022 was conducted. The primary endpoint was the development of capsular contracture. Possible predictors were analyzed in a mixed-effects model using the least absolute shrinkage and selection operator (LASSO). Moreover, a comparison of complications and an evaluation of predictors were carried out. Results: A total of 147 breasts, encompassing 82 nanotextured, 43 microtextured and 22 macrotextured TEs, were analyzed. Breasts with nanotextured TEs were less likely to develop capsular contracture overall (OR, 0.12; 95%CI 0.05–0.28, p < 0.001). Post-mastectomy radiotherapy (PMRT) was identified as a predictor for capsular contracture (OR, 4.67; 95%CI 1.86–11.71, p < 0.001). Breasts with nanotextured TEs showed a higher rate of seroma, but lower rates of malposition and pain. Predictors for developing postoperative complications included higher mastectomy weight (p = 0.008). Conclusions: Breasts with nanotextured TEs exhibited the lowest rate of capsular contracture compared to micro- and macrotextured TEs. Together with its MRI-compatibility and improved oncologic follow-up, the nanotextured TE seems to be a favorable device for expander-based breast reconstruction. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
33. Magnetic Nanoparticles in Biopolymer Fibers: Fabrication Techniques and Characterization Methods.
- Author
-
Bianchini Silva, Mariana, Costa, Ulisses Oliveira, Mattoso, Luiz Henrique Capparelli, Monteiro, Sergio Neves, de Souza, Michele Lemos, and Vitorazi, Letícia
- Subjects
- *
BIOCOMPATIBILITY , *ACRYLIC acid , *MAGNETIC nanoparticles , *ENVIRONMENTAL remediation , *INFRARED spectroscopy , *IRON oxides , *BIODEGRADABLE nanoparticles - Abstract
Hybrid nanocomposites combining biopolymer fibers incorporated with nanoparticles (NPs) have received increasing attention due to their remarkable characteristics. Inorganic NPs are typically chosen for their properties, such as magnetism and thermal or electrical conductivity, for example. Meanwhile, the biopolymer fiber component is a backbone, and could act as a support structure for the NPs. This shift towards biopolymers over traditional synthetic polymers is motivated by their sustainability, compatibility with biological systems, non-toxic nature, and natural decomposition. This study employed the solution blow spinning (SBS) method to obtain a nanocomposite comprising poly(vinyl pyrrolidone), PVA, and gelatin biodegradable polymer fibers incorporated with magnetic iron oxide nanoparticles coated with poly(acrylic acid), PAA2k, coded as γ-Fe2O3-NPs-PAA2k. The fiber production process entailed a preliminary investigation to determine suitable solvents, polymer concentrations, and spinning parameters. γ-Fe2O3-NPs were synthesized via chemical co-precipitation as maghemite and coated with PAA2k through the precipitation–redispersion protocol in order to prepare γ-Fe2O3-NPs-PAA2k. Biopolymeric fibers containing coated NPs with sub-micrometer diameters were obtained, with NP concentrations ranging from 1.0 to 1.7% wt. The synthesized NPs underwent characterization via dynamic light scattering, zeta potential analysis, and infrared spectroscopy, while the biopolymer fibers were characterized through scanning electron microscopy, infrared spectroscopy, and thermogravimetric analysis. Overall, this study demonstrates the successful implementation of SBS for producing biopolymeric fibers incorporating iron oxide NPs, where the amalgamation of materials demonstrated superior thermal behavior to the plain polymers. The thorough characterization of the NPs and fibers provided valuable insights into their properties, paving the way for their potential applications in various fields such as biomedical engineering, environmental remediation, and functional materials. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
34. Effects of Post-Processing Parameters on 3D-Printed Dental Appliances: A Review.
- Author
-
Hassanpour, Mana, Narongdej, Poom, Alterman, Nicolas, Moghtadernejad, Sara, and Barjasteh, Ehsan
- Subjects
- *
ACQUISITION of property , *RESEARCH personnel , *CUSTOMIZATION , *BIOCOMPATIBILITY , *DENTISTRY , *THREE-dimensional printing - Abstract
In recent years, additive manufacturing (AM) has been recognized as a transformative force in the dental industry, with the ability to address escalating demand, expedite production timelines, and reduce labor-intensive processes. Despite the proliferation of three-dimensional printing technologies in dentistry, the absence of well-established post-processing protocols has posed formidable challenges. This comprehensive review paper underscores the critical importance of precision in post-processing techniques for ensuring the acquisition of vital properties, encompassing mechanical strength, biocompatibility, dimensional accuracy, durability, stability, and aesthetic refinement in 3D-printed dental devices. Given that digital light processing (DLP) is the predominant 3D printing technology in dentistry, the main post-processing techniques and effects discussed in this review primarily apply to DLP printing. The four sequential stages of post-processing support removal, washing, secondary polymerization, and surface treatments are systematically navigated, with each phase requiring meticulous evaluation and parameter determination to attain optimal outcomes. From the careful selection of support removal tools to the consideration of solvent choice, washing methodology, and post-curing parameters, this review provides a comprehensive guide for practitioners and researchers. Additionally, the customization of post-processing approaches to suit the distinct characteristics of different resin materials is highlighted. A comprehensive understanding of post-processing techniques is offered, setting the stage for informed decision-making and guiding future research endeavors in the realm of dental additive manufacturing. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
35. Liquid Metal‐Enhanced Highly Adhesive Electrodes for Multifunctional Epidermal Bioelectronics.
- Author
-
Cao, Chunyan, Hou, Changshun, Wang, Xiong, Lv, Dong, Ai, Liqing, Feng, Yaxiu, Chen, Peiran, Wang, Xuejiao, He, Mingliang, and Yao, Xi
- Subjects
- *
LIQUID metals , *TISSUE adhesions , *WASTE recycling , *BIOELECTRONICS , *MEDICAL equipment - Abstract
Liquid metal (LM) bioelectronics find widespread uses in healthcare devices and medical implants. However, the current LM‐based electrodes suffer from achieving a combination of features including stable conductivity, high tissue adhesion, stability, good biocompatibility, degradability, and recyclability. In this work, a stable LM electrode is prepared with an extremely high adhesion strength (8.9 MPa), which is tunable in a wide range by introducing an adhesive ureidopyrimidinone (UPy)‐based polymer to harvest the abovementioned properties. With the help of dynamic LM particle‐polymer interactions in the polymer matrix, LMs can not only enhance the adhesion properties but also form a percolated network at a low LM loading (38 vol%) to achieve a high conductance stability (R/R0 = 0.76 at 100% strain). The high adhesion strength provides a highly stable electrical connection with rigid components with a high stretchability of 1154% when mounting a resistor, while a relatively low adhesion makes it a comfortable wounded skin‐interfaced electrode for accelerating wound healing. Taking advantage of their tunable surface adhesion and biocompatibility, the as‐prepared LM electrodes provide a more reliable and friendly approach to the development of healthcare devices. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
36. Microstructural and photocatalytic properties of nanostructured near-β Ti-Nb-Zr alloy for total hip prosthesis use.
- Author
-
Fellah, Mamoun, Hezil, Naouel, Bouras, Dikra, Habee, Majeed Ali, Hamadi, Fouzia, Bouchareb, Nabila, Laouini, Salah Eddine, Larios, Alejandro Perez, Aleksei, Obrosov, and El-Hiti, Gamal A.
- Subjects
- *
MECHANICAL alloying , *TOTAL hip replacement , *TERNARY alloys , *ARTIFICIAL bones , *ORTHOPEDIC implants - Abstract
With its unique corrosion resistance, light weight, mechanical strength, and biocompatibility, TNZ is a versatile metal alloy that is used in the aerospace and medical industries. The current study aims to investigate the effect of milling time (2, 12, 24, and 36 h) on the nanostructured ternary alloy Ti-25Nb-25Zr (TNZ) prepared by high energy ball milling, a process involving the use of a high-energy ball mill to mix and grind the alloy powders, on its structural, physical, and photocatalytic characterizations. The alloys’ characteristics, such as morphology, structural properties, relative density/porosity, surface roughness, hardness, and Young’s modulus, were evaluated using SEM, XRD, surface profilometer, and microdurometer, respectively. The photocatalytic characterization was conducted by measuring their absorbance as a function of time using a spectrophotometer of visible and ultraviolet light in the wavelength range of 250–650 nm. Results showed that the crystallite and mean pore size reduced with increasing milling time, with the smallest values of 25 nm and 34 μm, respectively, after 36 h. This indicates that longer milling times result in a more compact and uniform structure, which could enhance the mechanical properties of the alloy. Structural characterization shows that the amount of the β-Ti phase increased with increasing milling time, resulting in the spherical morphology and texturing of the synthesized alloys. The milled alloys’ structural evolution and morphological changes were sensitive to their milling times. Also, the relative density, Young’s modulus, and hardness increased, reaching values of 89 %, 105 GPa, and 352 HV, respectively, due to grain size decreasing with increasing milling time. This suggests that longer milling times lead to a denser and harder alloy, which could be beneficial for its use in total hip prostheses. The photocatalytical characterization demonstrated that the degradation of orange II (OII) increased with increasing milling time. The Ti-25Nb-25Zr catalyst gave the best degree of degradation, which meant that the decolorization process could be operated rapidly and at a relatively low cost without UV irradiation. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
37. Photoswitchable Spiropyridine Enabled Photoactuation of Polymeric Hydrogels under Physiological pH Conditions.
- Author
-
Liao, Cong, Du, Meng-Qi, and Li, Chuang
- Subjects
- *
MOLECULAR switches , *VISIBLE spectra , *HYDROGELS , *THIN films , *SWITCHING systems (Telecommunication) , *POLYMER networks - Abstract
The incorporation of molecular switches into polymer networks has been a powerful approach for the development of functional polymer materials that display macroscopic actuation and function enabled directly by molecular changes. However, such materials sometimes require harsh conditions to perform their functions, and the design of new molecular photoswitches that can function under physiological conditions is highly needed. Here, we report the design and synthesis of a spiropyridine-based photoswitchable hydrogel that exhibits light-driven actuation at physiological pH. Owing to its high pKa, spiropyridine maintains its ring-open protonated form at neutral pH, and the resulting hydrogel remains in a swollen state. Upon irradiation with visible light, the ring closure of spiropyridine leads to a decrease in the charge and a reduction in the volume of the hydrogel. The contracted gel could spontaneously recover to its expanding state in the dark, and this process is highly dynamic and reversible when the light is switched on and off. Furthermore, the hydrogel shows switchable fluorescence in response to visible light. Bending deformation is observed in the hydrogel thin films upon irradiation from one side. Importantly, the independence of this spiropyridine hydrogel from the acidic environment makes it biotolerant and shows excellent biocompatibility. This biocompatible spiropyridine hydrogel might have important biorelated applications in the future. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
38. BvCGT1‐mediated differential distribution of flavonoid C‐glycosides contributes to plant's response to UV‐B stress.
- Author
-
Zeng, Huihui, Li, Shuai, Wang, Kaixuan, Dai, Yiqun, Sun, Lanlan, Gao, Yue, Yi, Shanyong, Li, Junde, Xu, Sheng, Xie, Guoyong, Zhu, Yan, Zhao, Yucheng, and Qin, Minjian
- Subjects
- *
BIOCOMPATIBILITY , *FLAVONOIDS , *CHEMICAL stability , *PLANT adaptation , *GENE regulatory networks - Abstract
SUMMARY: C‐glycosides are a predominant class of flavonoids that demonstrate diverse medical properties and plant physiological functions. The chemical stability, structural diversity, and differential aboveground distribution of these compounds in plants make them ideal protectants. However, little is known about the transcriptional regulatory mechanisms that play these diverse roles in plant physiology. In this study, chard was selected from 69 families for its significantly different flavonoid C‐glycosides distributions between the aboveground and underground parts to investigate the role and regulatory mechanism of flavonoid C‐glycosides in plants. Our results indicate that flavonoid C‐glycosides are affected by various stressors, especially UV‐B. Through cloning and validation of key biosynthetic genes of flavonoid C‐glycosides in chard (BvCGT1), we observed significant effects induced by UV‐B radiation. This finding was further confirmed by resistance testing in BvCGT1 silenced chard lines and in Arabidopsis plants with BvCGT1 overexpression. Yeast one‐hybrid and dual‐luciferase assays were employed to determine the underlying regulatory mechanisms of BvCGT1 in withstanding UV‐B stress. These results indicate a potential regulatory role of BvDof8 and BvDof13 in modulating flavonoid C‐glycosides content, through their influence on BvCGT1. In conclusion, we have effectively demonstrated the regulation of BvCGT1 by BvDof8 and BvDof13, highlighting their crucial role in plant adaptation to UV‐B radiation. Additionally, we have outlined a comprehensive transcriptional regulatory network involving BvDof8 and BvDof13 in response to UV‐B radiation. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
39. Green Synthesis of Arylideneisoxazol-5-Ones Catalyzed by Silicon Dioxide Nanoparticles.
- Author
-
Mosallanezhad, Asiyeh and Kiyani, Hamzeh
- Subjects
- *
SILICA , *CHEMICAL yield , *HYDROXYLAMINE hydrochloride , *NANOPARTICLES , *BIOCOMPATIBILITY - Abstract
4-Arylideneisoxazol-5(4H)-ones were obtained via a simple and efficient one-pot, three-component cyclocondensation of diverse aldehydes with hydroxylamine hydrochloride and β-keto esters in water. This one-pot heterocyclization has been performed in the presence of catalytic amounts of silicon dioxide nanoparticles (SiO2 NPs) at room temperature. This approach is economical for the synthesis of potentially bioactive 4-arylideneisoxazol-5(4H)-one derivatives. The products were formed in 86–94% isolated reaction yields using 5 mol% nanocatalyst. The heterocyclization reactions were completed at room temperature under aqueous conditions. The significant features of the present procedure are uncomplicated product isolation, purification without chromatographic methods, great biocompatibility of SiO2 NPs, straightforward reaction conditions, easy workup, environmentally friendly, readily available starting materials, reusability of the catalyst, as well as inexpensive and green reaction medium. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
40. Preparation and biochemical evaluation of daily-thiosulfinate/polyoxyethylene conjugated pH-responsive micelle with enhanced stability, hydrosolubility and antibacterial properties.
- Author
-
Bhattacharya, Souptik and DasChowdhury, Sayamdipta
- Subjects
- *
POLYETHYLENE glycol , *CANCER cells , *BIOCOMPATIBILITY , *TEMPERATURE - Abstract
Diallyl thiosulfinate (DT), a major organosulfur chemical with several notable therapeutic characteristics, is highly unstable and easily degradable which restricts its extensive use in biopharmaceutical commodities. Therefore, utilizing the self-assembly nature of polyoxyethylene (Brij S20 and Brij 58), appropriate pH-responsive micelle carrier systems have been designed to entrap and improve DT's stability at an ambient temperature (25 °C) while preserving its quantity and biological activity. Comparing with the Brij S20 with the Brij 58 micelle carrier system, the latter demonstrated superior stability and entrapment of DT. In addition, it was found that DT's stability in micellized condition is significantly influenced by both pH and temperature (p < 0.05). The micelle system was capable enough to reduce degradation significantly. Additionally, the liberation of DT from micelle is greatly aided by acidic pH 1.5. Around 77% DT was released from Brij 58 system. Various biochemical analyses were done. The liberation of DT from the micelle in a controlled manner using lower pH as stimuli may facilitate its biological action at an individual's gastrointestinal lumen or near cancer cell environment having lower pH. Additionally, it was made sure that the micellization method did not impair DT's bioactivity or reduce appropriate biocompatibility. The current study increases the likelihood of creating a commercially available DT-loaded, micelle-based formulation for application in biopharma and food-related industries. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
41. Biocompatible polymer-based micro/nanorobots for theranostic translational applications.
- Author
-
Kim, Hyemin, Jo, Kyungjoo, Choi, Hyunsik, and Hahn, Sei Kwang
- Subjects
- *
TISSUE engineering , *DISEASE progression , *PATHOLOGICAL laboratories , *COMPANION diagnostics , *BIOCOMPATIBILITY , *MEDICAL polymers - Abstract
Recently, micro/nanorobots (MNRs) with self-propulsion have emerged as a promising smart platform for diagnostic, therapeutic and theranostic applications. Especially, polymer-based MNRs have attracted huge attention due to their inherent biocompatibility and versatility, making them actively explored for various medical applications. As the translation of MNRs from laboratory to clinical settings is imperative, the use of appropriate polymers for MNRs is a key strategy, which can prompt the advancement of MNRs to the next phase. In this review, we describe the multifunctional versatile polymers in MNRs, and their biodegradability, motion control, cargo loading and release, adhesion, and other characteristics. After that, we review the theranostic applications of polymer-based MNRs to bioimaging, biosensing, drug delivery, and tissue engineering. Furthermore, we address the challenges that must be overcome to facilitate the translational development of polymeric MNRs with future perspectives. This review would provide valuable insights into the state-of-the-art technologies associated with polymeric MNRs and contribute to their progression for further clinical development. [Display omitted] • Micro/nanorobot (MNR) with self-propulsion is promising for biomedical applications. • Biocompatible and multifunctional MNRs can be designed using polymers. • Polymeric MNRs are used for imaging, sensing, drug delivery, and tissue engineering. • Challenges need to be overcome for using these MNRs in clinical settings. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
42. Biocompatibility and expression of transcription factors of a type B gelatin-Extracellular Matrix of Porcin Urinary Blader scaffold.
- Author
-
Cuevas-Tapia, Olivia Abril, Gutiérrez-Sánchez, Mariana, Pozos-Guillén, Amaury, Cauich-Rodríguez, Juan Valerio, and Escobar-García, Diana María
- Subjects
- *
BLADDER , *EXTRACELLULAR matrix , *DEIONIZATION of water , *TRANSCRIPTION factors , *CELL division - Abstract
Objective: to evaluate a membrane based on type B gelatin (G) and porcine urinary bladder extracellular matrix (PUB-EM), highlighting the potential effect of the combination evaluated by biocompatibility and regulation of the expression of transcription factors involved in tissue regeneration. G-PUB-EM membranes were prepared at 12.5, 25, and 50% w/v, and evaluated for biocompatibility with Fibroblast. Chemical characterization by FTIR-ATR showed complex spectra during crosslinking process with glutaraldehyde. Physical tests were performed in deionized water and PBS for 48 h. A significant increase in swelling was observed during the first 2 h. Biocompatibility testing (MTS) and evaluation of the expression profile of genes involved in the cell cycle (Cyclin-D1 VEGF, TNF and NF-κ-B) by PCR showed an increase in viability in a PUB-EM content-dependent way, except for 50% PUB-EM membrane which showed cytotoxic effects with a decrease in cell viability below 70%. The membranes showed an increase in the expression of some factors of cell cycle, as well as inflammatory processes that could promote tissue repair. 12.5 and 25% gelatin type B/porcine urinary bladder extracellular matrix (G/PUB-EM) based membranes have potential for tissue regeneration applications. Impact Statement: The use of membranes based on type B gelatin and porcine urinary bladder for tissue engineering represents a novel strategy. Biocompatibility and signaling pathways play a primary role in tissue repair and wound recovery. Transcription factors that mediate signaling, cell division and vascularization are part of molecules that intervene in the regenerative potential of cells. These techniques will have a significant impact on tissue repair and regeneration and thus stop depending on tissue donors or other surgical sites from the same patient, as is the case with burn patients. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
43. Hydrogels composite optimized for low resistance and loading–unloading hysteresis for flexible biosensors.
- Author
-
Jia, Ben, Dong, Zhicheng, Ren, Xiaoyang, Niu, Muwen, Kong, Shuzhen, Wan, Xiaopeng, and Huang, Heyuan
- Subjects
- *
HYSTERESIS , *BIOLOGICAL interfaces , *ACRYLIC acid , *BIOSENSORS , *HYSTERESIS loop , *HYDROGELS , *ETHYLENE glycol - Abstract
In the graphical abstract, we illustrate the innovative design of physical–chemical hybrid crosslinked composite hydrogels that exhibit a unique combination of properties, making them well-suited for advanced applications in flexible electronics and biosensing. These hydrogels demonstrate ideal stretchability and compressibility, alongside excellent adhesion capabilities. Their design is strategically tailored to ensure biocompatibility without compromising the sensitive detection of physiological signals. The graphical representation showcases the multifaceted nature of these materials, highlighting their dynamic responsiveness to mechanical stimuli and their potential to seamlessly interface with biological tissues for real-time monitoring and diagnostic purposes. [Display omitted] With the advancement of wearable and implantable medical devices, hydrogel flexible bioelectronic devices have attracted significant interest due to exhibiting tissue-like mechanical compliance, biocompatibility, and low electrical resistance. In this study, the development and comprehensive performance evaluation of poly(acrylic acid)/ N,N′-bis(acryloyl) cystamine/ 1-butyl-3-ethenylimidazol-1-ium:bromide (PAA/NB/IL) hydrogels designed for flexible sensor applications are introduced. Engineered through a combination of physical and chemical cross-linking strategies, these hydrogels exhibit strong mechanical properties, high biocompatibility, and effective sensing capabilities. At 95 % strain, the compressive modulus of PAA/NB/IL 100 reach up to 3.66 MPa, with the loading–unloading process showing no significant hysteresis loop, indicating strong mechanical stability and elasticity. An increase in the IL content was observed to enlarge the porosity of the hydrogels, thereby influencing their swelling behavior and sensing functionality. Biocompatibility assessments revealed that the hemolysis rate was below 5 %, ensuring their suitability for biomedical applications. Upon implantation in rats, a minimal acute inflammatory response was observed, comparable to that of the biocompatibility control poly(ethylene glycol) diacrylate (PEGDA). These results suggest that PAA/NB/IL hydrogels hold promise as biomaterials for biosensors, offering a balance of mechanical integrity, physiological compatibility, and sensing sensitivity, thereby facilitating advanced healthcare monitoring solutions. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
44. Evaluation of biocompatibility and bioactive potential of Well-Root PT by comparison with ProRoot MTA and Biodentine.
- Author
-
Chae, Yong Kwon, Ye, Ju Ri, and Nam, Ok Hyung
- Abstract
Well-Root PT is a novel bioceramic material developed to overcome limitations of conventional calcium silicate cements. The purpose of this study was to assess the biocompatibility and bioactivity of a premixed putty-type cement, Well-Root PT. Identical cylindrical samples were prepared from ProRoot MTA, Biodentine, and Well-Root PT. In vitro calcium weight volume and calcium ion release from the materials were evaluated with scanning electron microscopy and energy-dispersive spectroscopy and inductively coupled plasma-optical emission spectroscopy. An in vivo rat direct pulp capping model was implemented with the materials (n = 14 per material). The rats were sacrificed at 7 or 28 days. Hematoxylin and eosin and immunohistochemical analyses were performed. In vitro calcium weight volume was 42.83 ± 8.82 % in ProRoot MTA, 47.05 ± 8.83 % in Biodentine, and 29.99 ± 4.94 % in Well-Root PT. Calcium ion releases from Well-Root PT after 7 and 28 days were similar with those from ProRoot MTA, but lower than those from Biodentine (P = 0.001 after 7 and 28 days equally). In an in vivo rat model, hematoxylin and eosin analysis showed no significant differences in inflammatory infiltration (P = 0.393) and hard tissue formation scores among the materials (P = 0.905). Also, both CD68 and DSPP expression showed similar results, with no significant differences among the materials (equally P = 0.874 for both markers). Within the limits of this study, Well-Root PT was comparable to ProRoot MTA and Biodentine in terms of biocompatibility and bioactivity. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
45. Facile fabrications of poly (acrylic acid)-mesoporous zinc phosphate/polydopamine Janus nanoparticles as a biosafe photothermal therapy agent and a pH/NIR-responsive drug carrier.
- Author
-
Gao, Wei, Yu, Xinyuan, Zhang, Chunpeng, Du, Haoyang, Yang, Shiya, Wang, Hao, Zhu, Jiuxin, Luo, Yakun, and Zhang, Manjie
- Subjects
JANUS particles ,ACRYLIC acid ,ANTINEOPLASTIC agents ,POLYETHYLENE glycol ,DRUG carriers - Abstract
Balancing biocompatibility and drug-loading efficiency in nanoparticles presents a significant challenge. In this study, we describe the facile fabrication of poly (acrylic acid)-mesoporous zinc phosphate/polydopamine (PAA-mZnP/PDA) Janus nanoparticles (JNPs). The PDA half-shell itself can serve as a photothermal agent for photothermal therapy (PTT), as well as to offers sites for polyethylene glycol (PEG) to enhance biocompatibility. Concurrently, the mesoporous ZnP core allows high loading of doxorubicin (DOX) for chemotherapy and the Cy5.5 dye for fluorescence imaging. The resultant PAA-mZnP/PDA-PEG JNPs exhibit exceptional biocompatibility, efficient drug loading (0.5 mg DOX/1 mg JNPs), and dual pH/NIR-responsive drug release properties. We demonstrate the JNPs' satisfactory anti-cancer efficacy, highlighting the synergistic effects of chemotherapy and PTT. Furthermore, the potential for synergistic fluorescence imaging-guided chemo-phototherapy in cancer treatment is illustrated. Thus, this work exemplifies the development of biosafe, multifunctional JNPs for advanced applications in cancer theranostics. Facile fabrication of monodispersed nanomedicine with multi-cancer killing modalities organically integrated is nontrivial and becomes more challenging under the biocompatibility requirement that is necessary for the practical applications of nanomedicines. In this study, we creatively designed PAA-mZnP/PDA JNPs and fabricated them under mild conditions. Our method reliably yields uniform JNPs with excellent monodispersity. To maximize functionalities, we achieve fourfold advantages including efficient drug/fluorescent dye loading, PTT, pH/NIR dual-responsive properties, and optimal biocompatibility. The as-fabricated JNPs exhibit satisfactory anti-cancer performance both in vitro and in vivo , and demonstrate the potential of JNPs in fluorescence imaging-guided synergistic cancer chemo-phototherapy. Overall, our research establishes a pathway in versatile inorganic/polymer JNPs for enhanced cancer diagnosis and therapy. [Display omitted] [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
46. Leveraging artificial intelligence for better translation of fibre-based pharmaceutical systems into real-world benefits.
- Author
-
Brako, Francis and Nkwo, Makuochi
- Subjects
TARGETED drug delivery ,TECHNOLOGICAL innovations ,PHARMACEUTICAL technology ,TREATMENT effectiveness ,ARTIFICIAL intelligence ,DRUG delivery systems - Abstract
The increasing prominence of biologics in the pharmaceutical market requires more advanced delivery systems to deliver these delicate and complex drug molecules for better therapeutic outcomes. Fibre technology has emerged as a promising approach for creating controlled and targeted drug delivery systems. Fibre-based drug delivery systems offer unprecedented opportunities for improving drug administration, fine-tuning release profiles, and advancing the realm of personalized medicine. These applications range from localized delivery at specific tissue sites to systemic drug administration while safeguarding the stability and integrity of delicate therapeutic compounds. Notwithstanding the promise of fibre-based drug delivery, several challenges such as non-scalability impede cost-effectiveness in the mass production of fibre systems. Biocompatibility and toxicity concerns must also be addressed. Furthermore, issues relating to stability, in-vitro in-vivo correlations, degradation rates, and by-product safety present additional hurdles. Pharmacoinformatics shows the impact of technologies in pharmaceutical processes. Emerging technologies such as Artificial Intelligence (AI) are a transformative force, progressively being applied to enhance various facets of pharmacy, medication development, and clinical healthcare support. However, there is a dearth of studies about the integration of AI in facilitating the translation of predominantly lab-scale pharmaceutical technologies into real-world healthcare interventions. This article explores the application of AI in fibre technology, its potential, challenges, and practical applications within the pharmaceutical field. Through a comprehensive analysis, it presents how the immense capabilities of AI can be leveraged with existing fibre technologies to revolutionize drug delivery and shape the future of therapeutic interventions by enhancing scalability, material integrity, synthesis, and development. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
47. In Vitro and In Vivo Biocompatibility of Bacterial Cellulose.
- Author
-
Girard, Vincent‐Daniel, Chaussé, Jérémie, Borduas, Martin, Dubuc, Émile, Iorio‐Morin, Christian, Brisebois, Simon, and Vermette, Patrick
- Subjects
BACTERIAL cell walls ,CYTOTOXINS ,ANIMAL experimentation ,ENDOTOXINS ,CELLULOSE - Abstract
Bacterial cellulose is a unique biomaterial produced by various species of bacteria that offers a range of potential applications in the biomedical field. To provide a cost‐effective alternative to soft‐tissue implants used in cavity infills, remodeling, and subdermal wound healing, in vitro cytotoxicity and in vivo biocompatibility of native bacterial cellulose were investigated. Cytotoxicity was assessed using a metabolic assay on Swiss 3T3 fibroblasts and INS‐1832/13 rat insulinoma. Results showed no cytotoxicity, whether the cells were seeded over or under the bacterial cellulose scaffolds. Biocompatibility was performed on Sprague–Dawley rats (males and females, 8 weeks old) by implanting bacterial cellulose membranes subcutaneously for 1 or 12 weeks. The explanted scaffolds were then sliced and stained with hematoxylin and eosin for histological characterization. The first series of results revealed acute and chronic inflammation persisting over 12 weeks. Examination of the explants indicated a high number of granulocytes within the periphery of the bacterial cellulose, suggesting the presence of endotoxins within the membrane, confirmed by a Limulus amebocyte lysate test. This discovery motivated the development of non‐pyrogenic bacterial cellulose scaffolds. Following this, a second series of animal experiments was done, in which materials were implanted for 1 or 2 weeks. The results revealed mild inflammation 1 week after implantation, which then diminished to minimal inflammation after 2 weeks. Altogether, this study highlights that unmodified, purified native bacterial cellulose membranes may be used as a cost‐effective biomedical device provided that proper endotoxin clearance is achieved. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
48. The Structure and Mechanical Properties of Ti–(36–40)Zr–9Ta (at %) Alloys for Medical Purposes.
- Author
-
Volchikhina, M. A., Konushkin, S. V., Mikhlik, S. A., Sergienko, K. V., Kaplan, M. A., Gorbenko, A. D., Sevostyanova, T. M., Kolmakov, A. G., and Sevostyanov, M. A.
- Abstract
In this work, the following are investigated: structure, phase composition and mechanical properties under static tension of titanium alloys Ti–(36–40)Zr–9Ta (at %) for medical use after hot rolling and quenching. After rolling, the alloys consist of α'- and β-phases. The results of the research show that the hardening of alloys leads to the almost complete dissolution of the β-phase and the release of α'- and α"-phases. Investigations of mechanical properties of alloys Ti–(36–40)Zr–9Ta (at %) show that, in terms of tensile strength, the studied alloys Ti–36Zr–9Ta, Ti–38Zr–9Ta, and Ti–40Zr–9Ta are similar to the VT6 alloy widely used for implants (σ = 835–1100 MPa), and, in terms of plasticity (δ = 15–21%) and low value of Young's modulus (E = 53–73 GPa), significantly exceeds it. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
49. Brushite Boron Cement with Antibacterial Properties.
- Author
-
Fadeeva, I. V., Fuzailova, Shachnoza, Dudenkov, I. V., Slukin, P. V., Andreeva, N. A., Knot'ko, A. V., and Deyneko, D. V.
- Abstract
Boron-containing brushite cements (B-BCs) for bone grafting based on boron-substituted β-tricalcium phosphate (B-TCP) are developed. The phase composition and microstructure of B-BCs are studied. It is shown that the crystalline phase of brushite is formed as a result of hardening of the cements. The behavior of B-BCs in a physiological saline containing a TRIS buffer is studied. The compression strength of B-BCs within 5 days after blending is 22.5 ± 1 MPa. Studies of antibacterial activity against the E. coli gram-negative strain ATCC25922 and S. aureus gram-positive strain ATCC25923 show that boron-containing brushite cement exhibits antibacterial activity against both strains, causing a decrease in the number of colony forming units (CFUs) already after 3 h of incubation. In vitro studies of the developed B-BCs are carried out, and it is shown that the developed cements based on TCP and B-TCP are biocompatible and promising for use in bone tissue surgery. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
50. Evaluation of the Biological Effect of Medical Devices: General Requirements for Biological Safety (Analytical Review).
- Author
-
Sevastianov, V. I., Perova, N. V., Arzumanyants, E. V., Perova, N. M., Kaminskaya, N. V., and Dovzhik, I. A.
- Abstract
The main goal of the article is to familiarize specialists working in the field of medical devices (MDs) with existing approaches to the study of their biocompatibility, set out in the standards of the GOST (State Standard) ISO 10993 series. The concept of the GOST (State Standard) ISO 10993 series of standards lies in establishing the biological safety and functional effectiveness of MDs in the terms of biological risk, as necessary and sufficient conditions for biocompatibility of MDs in clinical application. The main attention in the general scheme of assessing the biological safety of MD is paid to the program of toxicological studies (tests), consisting of a set of methods that take into account the category, purpose, and duration of MD functioning. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
Catalog
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.