Search

The honey bee has a significant environmental and economic impact. While collecting food or water, bees are exposed to negative physical and chemical factors that lead to physiological and behavioral changes and, consequently, even death. Along with the development of technology and communication, electromagnetic fields produced by artificial emitters have begun to have an impact on the environment. The aim of the study was to check whether the electromagnetic field also impacts antioxidant enzymes functioning in the honey bee's organism. The study was conducted under laboratory conditions, and one-day and seven-day-old honey bee workers were used in the experiment. Honey bee workers were exposed to an electromagnetic field with a frequency of 50Hz and variable intensity in the range of 1–10 kV/m. Immediately after the end of the exposure, hemolymph was collected from the bees for biochemical analysis. The results of the research did not show clearly whether changes in the activity of biochemical markers were affected by the time spent in the electromagnetic field or its intensity but did show that there was a difference in physiology between one-day-old and seven-day-old bees.

Copyright of Przegląd Elektrotechniczny is the property of Przeglad Elektrotechniczny and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Przegląd Elektrotechniczny is the property of Przeglad Elektrotechniczny and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Przegląd Elektrotechniczny is the property of Przeglad Elektrotechniczny and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Przegląd Elektrotechniczny is the property of Przeglad Elektrotechniczny and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Przegląd Elektrotechniczny is the property of Przeglad Elektrotechniczny and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Przegląd Elektrotechniczny is the property of Przeglad Elektrotechniczny and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Przegląd Elektrotechniczny is the property of Przeglad Elektrotechniczny and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Przegląd Elektrotechniczny is the property of Przeglad Elektrotechniczny and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Przegląd Elektrotechniczny is the property of Przeglad Elektrotechniczny and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Przegląd Elektrotechniczny is the property of Przeglad Elektrotechniczny and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Przegląd Elektrotechniczny is the property of Przeglad Elektrotechniczny and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Przegląd Elektrotechniczny is the property of Przeglad Elektrotechniczny and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Przegląd Elektrotechniczny is the property of Przeglad Elektrotechniczny and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Medycyna Pracy is the property of Instytut Medycyny Pracy im. Jerzego Nofera and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Medycyna Pracy is the property of Instytut Medycyny Pracy im. Jerzego Nofera and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

In 2017, preparations were made in Poland to provide all citizens with access to the Internet at a speed of at least 30 Mb/s, and at a speed of at least 100 Mb/s for 50% of households. This goal is to be realized, among others, by means of the fifth generation (5G) radio-communication networks. This work presents the assumptions of the 5G network structure and estimates of the level of population exposure toelectromagnetic fields related to their rational use. It was also analyzed whether, from the technical point of view, 5G networks could be implemented while respecting the currently acceptable level of electromagnetic field intensity in Poland (7 V/m), taking into account the current environmental exposure caused by antennas of cellular base stations. This is a contribution to the ongoing discussion on the need to change the requirements in Poland in order to limit the level of population exposure to electromagnetic fields. Based on the available documentation of the proposed technical standards, the theoretical analysis of environmental exposure to the electromagnetic field emitted by 5G systems shows that, with rational power management, obtaining the expected (compatible with 5G standards) quality of connections via base stations installed outside of buildings and using intelligent antenna systems with controlled beams, it will be possible to maintain the electric field strength and power density below the current limit values in places accessible to the public (<7 V/m, <0.1 W/m 2 ). Med Pr. 2020;71(2):245-53., (This work is available in Open Access model and licensed under a CC BY-NC 3.0 PL license.)

There is an ongoing discussion about electromagnetic hazards in the context of the new wireless communication technology - the fifth generation (5G) standard. Concerns about safety and health hazards resulting from the influence of the electromagnetic field (EMF) emitted by the designed 5G antennas have been raised. In Poland, the level of the population's exposure to EMF is limited to 7 V/m for frequencies above 300 MHz. This limitation results from taking into account the protective measures related not only to direct thermal hazards, but also to diversified indirect and long-term threats. Many countries have not established legal requirements in this frequency range, or they have introduced regulations based on recommendations regarding protection against direct thermal risks only (Council Recommendation 1999/519/EC). For such protection, the permissible levels of electric field intensity are 20-60 V/m (depending on the frequency). This work has been created through an interdisciplinary collaboration of engineers, biologists and doctors, who have been for many years professionally dealing with the protection of the biosphere against the negative effects of EMF. It presents the state of knowledge on the biological and health effects of the EMF emitted by mobile phone devices (including millimeter waves which are planned to be used in the 5G network). A comparison of the EU recommendations and the provisions on public protection being in force in Poland was made against this background. The results of research conducted to date on the biological effects of the EMF radiofrequency emitted by mobile telecommunication devices, operating with the frequencies up to 6 GHz, do not allow drawing any firm conclusions; however, the research evidence is strong enough for the World Health Organization to classify EMF as an environmental factor potentially carcinogenic to humans. At the moment, there is a shortage of adequate scientific data to assess the health effects of exposure to electromagnetic millimeter waves, which are planned to be used in the designed 5G devices. Nevertheless, due to the fact that there are data indicating the existence of biophysical mechanisms of the EMF influence that may lead to adverse health effects, it seems necessary to use the precautionary principle and the ALARA principle when creating environmental requirements for the construction and exploitation of the infrastructure of the planned 5G system. Med Pr. 2020;71(1):105-13., (This work is available in Open Access model and licensed under a CC BY-NC 3.0 PL license.)

Background: The paper describes the current legal status related to electromagnetic field (EMF) measurements in the context of environmental protection. It also presents the assumptions and exemplary results obtained from the EMF National Monitoring System which, in the authors' opinion, could be more reliable and better adapted to the current state of affairs in the radiocommunication industry., Material and Methods: A simplified method of estimating electromagnetic field intensity from various sources, including in particular cellular base stations, using their basic parameters, was described. The electromagnetic field monitoring system operating in Poland was described, and alternative monitoring methods were presented. The authors introduced their own concept of mobile monitoring, whose assumptions perfectly fit into the current realities and can be performed with the use of the current measurement equipment available to laboratories of the Voivodeship Inspectorates for Environmental Protection., Results: The construction of the measurement system was presented, and its measurement verification was carried out. Measurement errors resulting from the use of weather-resistant casing and from placing the device on the roof of the vehicle were estimated, confirming that their impact on the measurement uncertainty budget tends to be negligible. Auxiliary software for mobile monitoring was presented, with the aid of which verification was made by carrying out monitoring measurements in the city of Wrocław., Conclusions: The results obtained during the monitoring measurements in real conditions confirmed that the proposed method provides reliable results, which are not burdened with significant errors and distortions resulting from the proposed measurement methodology or from the construction of the measurement system itself. The developed system does not require significant financial outlays and is a perfect complement to the stationary measurements currently performed within the Environmental Monitoring System. Med Pr. 2019;70(5):567-85., (This work is available in Open Access model and licensed under a CC BY-NC 3.0 PL license.)

Background: Presented information about the welding process and equipment, focusing on the emission of electromagnetic field (EMF) with levels significant in terms of the labor safety regulations in force in Poland - the ordinances of the Minister of Family, Labour and Social Policy that came into force on June 27, 2016 and June 29, 2016 - emerged due to harmonization with European Union directive 2013/35/EU of 26 June 2013 of the European Parliament and the Council. They presented methods of determination of the EMF distribution in the welding machine surroundings and analyzed the background knowledge from the available literature., Material and Methods: The subject of the analysis included popular high frequency welders widely used in the industry. Electromagnetic field measurements were performed in the welder operating place (in situ) during machine normal operations, using measurement methods accordant with labor safety regulations in force in Poland and according to the same guidelines, the EMF distributions and parameters having been described., Results: They presented various scenarios of particular, real examples of excessive exposure to EMF in the dielectric welder surroundings and showed solutions, ranging from simple and costless and ending on dedicated electromagnetic shielding systems, which allowed to reduce EMF exposure in some cases of more than 80% (protection zone ranges) or eliminate dangerous zone presence., Conclusions: It has shown that in the dielectric welders surrounding, significant EMF strength levels may be the result of errors or omissions which often occur during development, installation, operation or modification of welding machines. It has allowed to present the measures that may significantly reduce the exposure to EMF of workers in the welder surroundings. The role of accredited laboratories in helping in such cases was underlined. Med Pr 2017;68(6):693-703., (This work is available in Open Access model and licensed under a CC BY-NC 3.0 PL license.)

Background: The paper presents changes in the electromagnetic field intensity in a school building and its surrounding after the mobile phone base station installation on the roof of the school., Material and Methods: The comparison of EMF intensity measured before the base station was launched (electromagnetic background measurement) and after starting its operation (two independent control measurements) is discussed., Results: Analyses of measurements are presented and the authors also propose the method of the electromagnetic field distribution adjustment in the area of radiation antennas side lobe to reduce the intensity of the EMF level in the base station proximity. The presented method involves the regulation of the inclination., Conclusions: On the basis of the measurements, it was found that the EMF intensity increased in the building and its surroundings, but the values measured with wide margins meet the requirements of the Polish law on environmental protection.

The work addresses technical aspects of the assessment of exposure to electromagnetic fields (EMF) in the environment based on cellular telephony systems. In this paper, EMF parameters, important to the biosphere exposure, are discussed, and the methods for the EMF assessment: theoretical analysis of EMF intensity in the proximity of EMF sources and also the measurements in situ, are described. The review of measurement methods, identification of limitations of measuring devices, estimation of the expected EMF intensity in the municipal environment and environmental measurements uncertainty are presented. M

In the paper a review of electromagnetic field sources in radio- and microwave- frequency range is presented. The aim of the study was to analyze possibilities and methods used to survey electromagnetic field (EMF) measurements. Selective and broadband methods with examples of apparatus are described. The accuracy of typical EMF survey measurements was estimated.

The paper presents issues concerning a better understanding of reports on the impact of objects emitting electromagnetic fields on the environment among non-specialists in telecommunication. A proposed universal model of the radiation pattern of antenna base stations to widen the information contained in environmental audits as well as a vocabulary of basic technical terms in colloquial language are discussed.

Background: The aim of the study was to analyze and modify methods used to estimate the range of restricted area corresponding with the limitation of exposure of the general public to electromagnetic fields in the vicinity of microwave relay antenna systems., Materials and Methods: In this paper a well known spherical-wave model is revised. Some drawbacks of this model in terms of the microwave relay antenna systems are shown and a method for their elimination is proposed. The idea of this method is based on placing an equivalent point source of radiation behind the actual antenna, and then on taking into account the power density produced by this source over the antenna aperture., Results: In the course of the study an algorithm for the range of restricted area estimation was developed. Some results of calculation validating the proposed method are presented., Conclusions: The proposed model and algorithm for the range of restricted area estimation may be employed in administrative procedures for evaluating the effects exerted on the environment. The proposed method can be regarded as an alternative to the presently employed spherical wave approach in the case of the microwave relay antenna systems.