Search

Mitigating climate change requires transformational advances for carbon dioxide removal, including geologic carbon sequestration in reactive subsurface environments. The Wallula Basalt Carbon Storage Pilot Project demonstrated that CO

Injecting fluids into underground geologic structures is crucial for the development of long-term strategies for managing captured carbon and facilitating sustainable energy extraction operations. We have previously reported that the injection of metal-organic frameworks (MOFs) into the subsurface can enhance seismic monitoring tools to track fluids and map complex structures, reduce risk, and verify containment in carbon storage reservoirs because of their absorption capacity of low-frequency seismic waves. Here, we demonstrate that water-based Cr/Zn/Zr MOF colloidal suspensions (nanofluids) are multimodal geophysical contrast agents that enhance near-wellbore logging tools. Based on experimental fluid-only measurements, MIL-101(Cr), ZIF-8, and UiO-66 nanofluids have distinct complex conductivity and/or low-field nuclear magnetic resonance (NMR) signatures that are relevant to field-deployed technologies, implying the potential to enhance near-wellbore monitoring of CO

We place metamaterials in the context of underpinning physical phenomena, including negative refraction, bandgaps, wave focusing, and negative Poisson’s ratio. The designs, mechanisms, governing equations, and effective parameters are discussed.

ConspectusWith the worldwide demand for refrigeration and cooling expected to triple, it is increasingly important to search for alternative energy resources to drive refrigeration cycles with reduced electricity consumption. Recently, adsorption cooling has gained increased attention since energy reallocation in such systems is based on gas adsorption/desorption, which can be driven by waste/natural heat sources. Eco-friendly sorption-based cooling relies on the cyclic transfer of refrigerant gas from a high to low energy state by the pseudocompression effect resulting from adsorption and desorption. The driving force for energy transfer relies on heat rather than electricity. The performance of a sorption chiller is primarily influenced by this cyclic sorption behavior, which is characterized as the working capacity of the porous sorbent. Thus, increases in this working capacity directly translate to a more compact and efficient cooling system. However, a lack of highly effective sorbent/refrigerant pairs lowers cooling performance and therefore has limited applicability. To this end, synthetic metal-organic frameworks (MOFs) and covalent organic polymers (COPs) possess higher porosity and greater tunability leading to more substantial potential benefits for adsorption, compared to traditional sorbent materials. Similarly, hydrofluorocarbon refrigerants have more favorable applicability given the ease of operation above atmospheric pressures due to suitable saturated vapor pressures and boiling points. For these reasons, our work focuses on an ongoing strategy to promote sorption cooling via improvements in the sorbent/refrigerant pair. Specifically, we target the interaction of hydrofluorocarbon refrigerants with MOF/COP materials at a molecular level by interpreting the host-guest chemistry and the role of framework pore topology. These molecular-level differences translate to cooling performance, which is described herein. These strategies include engineering framework porosity (i.e., pore size, pore volume) by using elongated organic linkers and stereochemistry control during synthesis; manipulating the sorbate/sorbent interaction by introducing functional moieties or unsaturated metal centers to enhance working capacities in narrow pressure ranges; varying pore topology/morphology to impact adsorption isotherm behavior; and leveraging defective sites within the frameworks to further enhance adsorption capability. This atomic level understanding of sorbate-sorbent interactions is conducted using various in situ experimental techniques such as synchrotron-based X-ray diffraction, X-ray absorption spectroscopy, in situ Fourier transform infrared spectroscopy, and direct sorption energies determinization with calorimetry. Moreover, the experimentally studied interactions and the corresponding adsorption mechanism are corroborated by computational studies using density functional theory (DFT) and grand canonical Monte Carlo (GCMC) simulations. Using this approach, we have made strides toward engineering designed frameworks with precise molecular control to target refrigerant molecules and thereby enhance the performance of desired working pairs for sorption-based cooling.

Although traditional commercially available porous carbon-fluorocarbon working pairs have shown promising applicability for adsorption cooling, advancements in engineered carbons may further improve the performance. Moreover, insights into structure-property relationships that target higher sorption capacities within these synthesized carbons may guide such materials' future design. We utilized hierarchically porous carbons (HPCs), synthesized with colossal microporous and mesoporous content characterized by high surface areas (up to 2689 m2/g) and pore volume values (up to 10.31 cm3/g) toward fluorocarbon R134a adsorption. This unique pore topology leads to exceptional R134a uptake, ∼250 wt %, outperforming the highest uptake carbon material to date, Maxsorb III (∼220 wt %). Material characterizations reveal that the outstanding R134a capacity may be attributed to textural properties and oxygen-terminated functional groups more than graphitization of the material. Most importantly, HPCs are efficiently utilized in a two-bed model chiller device, where the performance shows excellent working capacity (105 wt %, ∼2 times the value of reported carbon materials/R134a). Fluorocarbon adsorption on HPCs also displays fast kinetics (equilibrium time: ∼2 min) mainly driven by physical adsorption (Qst: ∼27 kJ/mol), characteristic of swiftly reversible behavior adsorption-desorption behaviors. This work provides a fundamental understanding of the applicability of HPCs/R134a working pair for adsorption cooling.

Transition-metal pentacyanonitrosylferrates, commonly known as nitroprussides, have a long and documented history. Here, we synthesize cobalt and nickel nitroprussides (NPs) in order to probe their use as sorbents for water and fluorocarbon uptake for potential water harvesting and cooling applications. These NPs show stable and reversible equilibrium sorption isotherms at room temperature with peak uptake values of ∼40 wt % for H

In 2013, the Pacific Northwest National Laboratory led a geologic carbon sequestration field demonstration where ∼1000 tonnes of CO2 was injected into several deep Columbia River Basalt zones near Wallula, Washington. Rock core samples extracted from the injection zone two years after CO2 injection revealed nascent carbonate mineralization that was qualitatively consistent with expectations from laboratory experiments and reactive transport modeling. Here, we report on a new detailed analysis of the 2012 pre-injection and 2015 post-injection hydrologic tests that capitalizes on the difference in fluid properties between scCO2 and water to assess changes in near-field, wellbore, and reservoir conditions that are apparent approximately two years following the end of injection. This comparative hydrologic test analysis method provides a new way to quantify the amount of injected CO2 that was mineralized in the field test. Modeling results indicate that approximately 60% of the injected CO2 was sequestered via mineralization within two years, with the resulting carbonates occupying ∼4% of the available reservoir pore space. The method presented here provides a new monitoring tool to assess the fate of CO2 injected into chemically reactive basalt formations but could also be adapted for long-term monitoring and verification within more traditional subsurface carbon storage reservoirs.

Injecting fluids into deep underground geologic structures is a critical component to development of long-term strategies for managing greenhouse gas emissions and facilitating energy extraction operations. Recently, we reported that metal-organic frameworks are low-frequency absorptive acoustic metamaterial that may be injected into the subsurface enhancing geophysical monitoring tools used to track fluids and map complex structures. A key requirement for this nanotechnology deployment is transportability through porous geologic media without being retained by mineral-fluid interfaces. Flow-through column studies were used to estimate transport and retention properties of five different polymer-coated MIL-101(Cr) nanoparticles in siliceous porous media. Nanoparticle transport experiments revealed that nanoparticle surface characteristics play a critical role in nanoparticle colloidal stability and as well the transport.

The dynamics and reactivity of nanoconfined fluids play critical roles across a wide range of environmental and technological systems, though reaction mechanisms and kinetics are not well understood. The carbonation kinetics of forsterite (Mg2SiO4) exposed to 90 atm supercritical carbon dioxide at 35–65 °C and 85–100% relative humidity (RH) was monitored with in situ X-ray diffraction, and partner molecular dynamics simulations were used to describe the free energy landscape of Mg2+ adsorption and diffusion on forsterite surfaces covered in water films 3–10 monolayers thick. The collective findings reveal how decreasing the water film thickness by ∼1.4 monolayers, from ∼0.92 to ∼0.64 nm, inhibited reaction rates by up to 97%, promoted anhydrous Mg-carbonate (magnesite, MgCO3) precipitation, and more than doubled the apparent activation energy of carbonation. The transport simulations suggest that four monolayers are required to enable sufficiently facile Mg2+ diffusion, helping explain previously observed water film thickness-dependent reactivity thresholds.

Magnesium-dominant olivine (Mg2SiO4) has received considerable attention for geologic and ex situ carbon mineralization due to its reaction potential with CO2 and its abundance in mafic and ultrama...

Pumping of fluids is universally performed by using mechanical or thermal compressors. We introduce a new solid-state molecular pumping approach induced by switching the adsorption affinity for a g...

One approach to reduce increasing concentrations of toxic per- and polyfluoroalkyl substances (PFAS) involves the capture of PFAS from aqueous media using porous materials. The use of highly porous, tunable metal organic framework (MOF) materials is appealing for targeted liquid phase sorption. In this work, we demonstrate the excellent capture of perfluorooctanesulfonate (PFOS) using both the chromium and iron analogs of the MIL-101 framework. Experimental characterization of PFOS uptake reveals unique differences in sorption properties between these two analogs, providing key implications for future PFOS sorbent design. Specifically, STEM-EDS and IR spectroscopy show definitive proof of sorption. Furthermore, XPS analysis shows evidence of a strong interaction between sulfur atoms of the polar headgroup of PFOS and the metal center of the framework in addition to the fluorinated nonpolar tail. Additionally, in situ

Dialkylmagnesium compounds (MgR2, R = C2H5, C4H9 etc.,) have drawn considerable interest in recent years due to their role in commercial polymerization reactions. Herein, we report a thorough account on the reaction intermediates involved in the synthesis of di-n-butylmagnesium from anhydrous magnesium chloride and n-butyllithium. Energy-dispersive X-ray spectroscopy (EDX) and powder X-ray diffraction (PXRD) were used to characterize the products formed in transmetalation reaction and it supports that the Schlenk equilibrium between the nBuMgCl and nBu2Mg may be operating during the synthesis of di-n-butylmagnesium from anhydrous magnesium chloride. 1,4-Dioxane was used to shift the Schlenk equilibrium to form soluble 1,4-dioxane adduct of di-n-butylmagnesium and insoluble MgCl2 based product. PXRD was used to study the transformation of 1,4-dioxane adduct of di-n-butylmagnesium to pure di-n-butylmagnesium.

We used IR and XRD, with supporting theoretical calculations, to investigate the swelling behavior of Na

In 2013, the Pacific Northwest National Laboratory led a geologic carbon sequestration field demonstration where ∼1000 tonnes of CO

13C nuclear magnetic resonance (NMR) spectroscopy shows that high-resolution spectra of isotopically enriched CH4 and CO2 can be obtained for a millimeter-sized natural shale sample under in situ conditions relevant to petroleum reservoirs (T = 323 K, and Pfluid = 90 bar) using magic angle spinning. These results show for the first time that this technique has the potential to provide otherwise unobtainable, species-specific structural and dynamical insight into the pore systems of shales and other tight reservoir and source rocks and can thus help guide the design of the methods used in enhanced petroleum production. The NMR results show that CH4 and CO2 readily displace each other in the nanoporosity ( 10 nm) pore spaces of the shale studied here, that CH4 in nanopores, mesopores, and bulk fluid can be distinguished by NMR, and that the partitioning of CH4 between nano- and mesopores depends upon the CH4/CO2 ratio and, thus, partial pressures of the individual fluid species.

Efficient regeneration of organolithium compounds is a challenging aspect in the process of novel organometathetical catalytic cycles. One of these catalytic cycles is a newly suggested method for Mg production from seawater that capitalizes on the rich chemistry of Grignard reagents. The proposed three-step catalytic cycle with Cp2 MCl L catalyst ( M = Ti, Zr; L = select organic ligands) requires the regeneration of nBuLi from Li(s), butene, and H2. The potential of this approach is evaluated with density functional theory-based molecular simulations. The results reveal that the high affinity of Li toward Cl and N results in the formation of alkanes, and the strong coupling between the catalyst and BuLi leads to catalyst deactivation. To improve its catalytic performance, we proposed the use of a diamine cocatalyst and a modified catalyst with a ligand that does not contain N, which would help release BuLi from the vicinity of the catalytic center. Ab initio molecular dynamics simulations at 298 K in explicit solvent (THF) were used to estimate the Gibbs free energetics and equilibrium constants obtained from the vibrational density of states using velocity autocorrelation functions. The results show a marked improvement in the free energetics with lower barriers toward the completion of the catalytic cycle and suppression of deactivation channels.

Through solar, wind, or geothermal reallocation sources, heat transformation via adsorption-based systems provides the means to address the high energy global demand from refrigeration and cooling. However, improvements toward a suitable, high performing adsorbent–refrigerant working pair must be made to boost the applicability of such systems. For the first time, a series of mesoporous metal–organic frameworks (MOFs) have been tested for R134a fluorocarbon adsorption for this purpose. Each of the selected MOFs exhibit excellent, reversible R134a adsorption. Among them, NU-1000 provided an exceptional fluorocarbon uptake of ∼170 wt % near saturation, which is among the highest values reported so far for MOFs. Exhibiting appropriate equilibrium isotherm behavior and working capacities as large as 125 wt %, it is evident that mesoporous MOFs—especially those with hierarchical structure—are promising candidates for chiller applications. Such high performance materials provide significant potential for the de...

Alkali-exchanged SSZ-13 adsorbents were investigated for their applicability in separating N2 from CO2 in flue gas streams using a dynamic breakthrough method. In contrast to IAST calculations based on equilibrium isotherms, K+ exchanged SSZ-13 was found to yield the best N2 productivity, comparable to Ni-MOF-74, under dynamic conditions where diffusion properties play a significant role. This was attributed to the selective, partial blockage of access to the chabazite cavities, enhancing the separation potential in a 15/85 CO2/N2 binary gas mixture.

With advances in porous carbon synthesis techniques, hierarchically porous carbon (HPC) materials are being utilized as relatively new sorbents for CO2 capture applications. These HPC materials were used as a platform to prepare samples with differing textural properties and morphologies to elucidate structure–property relationships. It was found that high microporous content, rather than overall surface area, was of primary importance for predicting good CO2 capture performance. Two HPC materials were analyzed, each with near identical high surface area (∼2700 m2/g) and colossally high pore volume (∼10 cm3/g), but with different microporous content and pore size distributions, which led to dramatically different CO2 capture performance. Overall, large pore volumes obtained from distinct mesopores were found to significantly impact adsorption performance. From these results, an optimized HPC material was synthesized that achieved a high CO2 capacity of ∼3.7 mmol/g at 25 °C and 1 bar.

Magnetic core–shell microspheres were developed to extract rare earth elements (REEs) from aqueous and brine solutions with up to 99.99% removal efficiency. The shell, composed of a thermally and chemically stable functionalized metal–organic framework (MOF), is grown over a synthesized Fe3O4 magnetic core (magnetite@MOF). The composite particles can be removed from the mixture under an applied magnetic field, offering a practical, and efficient REE-removal process.

A new efficient and solvent-free method for the synthesis of anhydrous MgCl2 from its hexahydrate is presented. Fluidized dehydration of MgCl2·6H2O feedstock at 200 °C in a porous bed reactor yields MgCl2·nH2O (0 < n < 1), which has a similar diffraction pattern as activated MgCl2. The MgCl2·nH2O is then ammoniated directly using liquefied NH3 in the absence of solvent to form MgCl2·6NH3. Calcination of the hexammoniate complex at 300 °C then yields anhydrous MgCl2. Both dehydration and deammoniation were thoroughly studied using in situ as well as ex situ characterization techniques. Specifically, a detailed understanding of the dehydration process was monitored by in situ PXRD and in situ FTIR techniques where formation of salt with nH2O (n = 4, 2, 1

We have studied the mechanism of intercalation and methane adsorption from a H2O/CH4/CO2 mixture on a prototypical swelling shale component, Ca–montmorillonite. We employed ab initio molecular dynamics simulations at 323 K and 90 bar to obtain molecular level information on adsorption energetics, speciation, and structural and thermodynamic properties. Interaction of CH4 with surface Lewis acidic sites (Ca2+, surface OH) results in large induced dipoles (∼1 D) that lead to relatively strong adsorption energies compared to interactions of the normally apolar CH4 that level off once a CH4 layer is formed. Intercalated CH4, also exhibits large induced dipoles at lower hydration levels, when the interaction with Ca2+ cations are less hindered. CO2 displaces CH4 in the coordination sphere of the cations (in the interlayer) or on the surface, thereby driving CH4 extraction. Our simulations indicate that there is an optimal pressure range (∼70–90 bar) where scCO2-facilitated CH4 extraction will be maximized.

Layered aluminosilicates play a dominant role in the mechanical and gas storage properties of the subsurface, are used in diverse industrial applications, and serve as model materials for understanding solvent–ion-support systems. Although expansion in the presence of H2O is well-known to be systematically correlated with the hydration free energy of the interlayer cation, particularly in environments dominated by nonpolar solvents (i.e., CO2), uptake into the interlayer is not well-understood. Using novel high-pressure capabilities, we investigated the interaction of dry supercritical CO2 with Na-, NH4-, and Cs-saturated montmorillonite, comparing results with predictions from molecular dynamics simulations. Despite the known trend in H2O and that cation solvation energies in CO2 suggest a stronger interaction with Na, both the NH4- and Cs-clays readily absorbed CO2 and expanded, while the Na-clay did not. The apparent inertness of the Na-clay was not due to kinetics, as experiments seeking a stable expa...

Injection of fluids into geologic formations for long term disposition (CO 2 ) or to improve energy extraction operations can benefit from subsurface monitoring programs capable of providing three dimensional spatial imaging of fluid distributions in the host reservoirs. More importantly, advancements in horizontal drilling and fluid fracking technologies are attracting a broader portfolio of non-traditional engineered subsurface reservoirs that possess complex fluid flow typically through engineered fracture networks. For example, producing fossil fuels from tight sands or shale formations, geothermal based heat extraction operations in low-permeability rock formations, and storing injected fluids (i.e. CO 2 , acid gases, waste waters, etc.) in the subsurface all require rigorous tracking techniques capable of identifying fluid migration. Current methodologies for four dimensional (3D spatial changes over time) subsurface monitoring of injected fluids are typically geophysical, using surface stations and borehole devices which employ seismic, electromagnetic, and gravitational techniques. However current methods often lack sufficient measurement sensitivity to adequately track fluid migration, and often incur a large economic cost. In this paper, we describe an entirely new class of acoustically responsive contrast agents to enable high-sensitivity, high-resolution tracking of injected fluids via conventional seismic imaging that have the potential of improving subsurface fracture network mapping and plume monitoring in CO 2 storage operations.

Magnesite (MgCO3) precipitation within the nanoconfined space of adsorbed H2O films (∼5 monolayers) was determined to have an apparent activation energy of only 36 ± 6 kJ mol-1, suggesting that Mg2+ under nanoconfinement adopts a hydration configuration that mimics that of aqueous Ca2+, at least energetically, if not also specifically in hydration structure.

The rapid growth in the global energy demand for space cooling requires the development of more efficient environmental chillers for which adsorption-based cooling systems can be utilized. Here, in this contribution, we explore sorbents for chiller use via a pore-engineering concept to construct analogs of the 1-dimensional pore metal-organic framework MOF-74 by using elongated organic linkers and stereochemistry control. The prepared pore-engineered MOFs show remarkable equilibrium adsorption of the selected fluorocarbon refrigerant that is translated to a modeled adsorption-based refrigeration cycle. To probe molecular level interactions at the origin of these unique adsorption properties for this series of Ni-MOFs, we combined in situ synchrotron X-ray powder diffraction, neutron powder diffraction, X-ray absorption spectroscopy, calorimetry, Fourier transform infrared techniques, and molecular simulations. Our results reveal the coordination of fluorine (of CH2F in R134a) to the nickel(II) open metal centers at low pressures for each Ni-MOF analog and provide insight into the pore filling mechanism for the full range of the adsorption isotherms. The newly designed Ni-TPM demonstrates exceptional R134a adsorption uptake compared to its parent microporous Ni-MOF-74 due to larger engineered pore size/volume. The application of this adsorption performance toward established chiller conditions yields a working capacity increase for Ni-TPM of about 400% from that of Ni-MOF-74, which combined with kinetics directly correlates to both a higher coefficient of performance and a higher average cooling capacity generated in a modeled chiller.

The abundance of novel metal-organic framework (MOF) materials continues to increase as more applications are discovered for these highly porous, well-ordered crystalline structures. The simplicity of constituents allows for the design of new MOFs with virtue of functionality and pore topology toward target adsorbates. However, the fundamental understanding of how these frameworks evolve during nucleation and growth is mostly limited to speculation from simulation studies. In this effort, we utilize a unique vacuum compatible system for analysis at the liquid vacuum interface (SALVI) microfluidic interface to analyze the formation and evolution of the benchmark MOF-74 framework using time-of-flight secondary ion mass spectrometry (ToF-SIMS). Principal component analysis of the SIMS mass spectra, together with ex situ electron microscopy, powder X-ray diffractometry, and porosimetry, provides new insights into the structural growth, metal-oxide cluster formation, and aging process of Zn-MOF-74. Samples collected over a range of synthesis times and analyzed closely with in situ ToF-SIMS, transmission electron microscopy, and gas adsorption studies verify the developing pore structure during the aging process.

The improvement in adsorption/desorption of hydrofluorocarbons has implications for many heat transformation applications such as cooling, refrigeration, heat pumps, power generation, etc. The lack of chlorine in hydrofluorocarbons minimizes the lasting environmental damage to the ozone, with R134a (1,1,1,2-tetrafluoroethane) being used as the primary industrial alternative to commonly used Freon-12. The efficacy of novel adsorbents used in conjunction with R134a requires a deeper understanding of the host-guest chemical interaction. Metal-organic frameworks (MOFs) represent a newer class of adsorbent materials with significant industrial potential given their high surface area, porosity, stability, and tunability. In this work, we studied two benchmark MOFs, a microporous Ni-MOF-74 and mesoporous Cr-MIL-101. We employed a combined experimental and simulation approach to study the adsorption of R134a to better understand host-guest interactions using equilibrium isotherms, enthalpy of adsorption, Henry’s coefficients, and radial distribution functions. The overall uptake was shown to be exceptionally high for Cr-MIL-101, >140 wt% near saturation while >50 wt% at very low partial pressures. For both MOFs, simulation data suggest that metal sites provide preferable adsorption sites for fluorocarbon based on favorable C-F ··· M+ interactions between negatively charged fluorine atoms of R134a and positively charged metal atoms of the MOF framework.

Magnesite (MgCO3) precipitation within the nanoconfined space of adsorbed H2O films (∼5 monolayers) was determined to have an apparent activation energy of only 36 ± 6 kJ mol-1, suggesting that Mg2+ under nanoconfinement adopts a hydration configuration that mimics that of aqueous Ca2+, at least energetically, if not also specifically in hydration structure.

BACKGROUND Natural nanomaterials have always been abundant during Earth’s formation and throughout its evolution over the past 4.54 billion years. Incidental nanomaterials, which arise as a by-product from human activity, have become unintentionally abundant since the beginning of the Industrial Revolution. Nanomaterials can also be engineered to have unusual, tunable properties that can be used to improve products in applications from human health to electronics, and in energy, water, and food production. Engineered nanomaterials are very much a recent phenomenon, not yet a century old, and are just a small mass fraction of the natural and incidental varieties. As with natural and incidental nanomaterials, engineered nanomaterials can have both positive and negative consequences in our environment. Despite the ubiquity of nanomaterials on Earth, only in the past 20 years or so have their impacts on the Earth system been studied intensively. This is mostly due to a much better understanding of the distinct behavior of materials at the nanoscale and to multiple advances in analytic techniques. This progress continues to expand rapidly as it becomes clear that nanomaterials are relevant from molecular to planetary dimensions and that they operate from the shortest to the longest time scales over the entire Earth system. ADVANCES Nanomaterials can be defined as any organic, inorganic, or organometallic material that present chemical, physical, and/or electrical properties that change as a function of the size and shape of the material. This behavior is most often observed in the size range between 1 nm up to a few to several tens of nanometers in at least one dimension. These materials have very high proportions of surface atoms relative to interior ones. Also, they are often subject to property variation as a function of size owing to quantum confinement effects. Nanomaterial growth, dissolution or evaporation, surface reactivity, and aggregation states play key roles in their lifetime, behaviors, and local interactions in both natural and engineered environments, often with global consequences. It is now possible to recognize and identify critical roles played by nanomaterials in vital Earth system components, including direct human impact. For example, nanomaterial surfaces may have been responsible for promoting the self-assembly of protocells in the origin of life and in the early evolution of bacterial cell walls. Also, weathering reactions on the continents produce various bioavailable iron (oxy)hydroxide natural and incidental nanomaterials, which are transported to the oceans via riverine and atmospheric pathways and which influence ocean surface primary productivity and thus the global carbon cycle. A third example involves nanomaterials in the atmosphere that travel locally, regionally, and globally. When inhaled, the smallest nanoparticles can pass through the alveolar membranes of the lungs and directly enter the bloodstream. From there, they enter vital organs, including the brain, with possible deleterious consequences. OUTLOOK Earth system nanoscience requires a convergent approach that combines physical, biological, and social sciences, as well as engineering and economic disciplines. This convergence will drive developments for all types of intelligent and anticipatory conceptual models assisted by new analytical techniques and computational simulations. Ultimately, scientists must learn how to recognize key roles of natural, incidental, and engineered nanomaterials in the complex Earth system, so that this understanding can be included in models of Earth processes and Earth history, as well as in ethical considerations regarding their positive and negative effects on present and predicted future environmental and human health issues.

Continued global use of fossil fuels places a premium on developing technology solutions to minimize increases in atmospheric CO2 levels. CO2 storage in reactive basalts might be one of these solutions by permanently converting injected gaseous CO2 into solid carbonates. Herein, we report results from a field demonstration in which ∼1000 metric tons of CO2 was injected into a natural basalt formation in eastern Washington state. Following post-injection monitoring for 2 years, cores were obtained from within the injection zone and subjected to detailed physical and chemical analysis. Nodules found in vesicles throughout the cores were identified as the carbonate mineral, ankerite Ca[Fe,Mg,Mn](CO3)2. Carbon isotope analysis showed the nodules are chemically distinct compared with natural carbonates present in the basalt and in clear correlation with the isotopic signature of the injected CO2. These findings provide field validation of rapid mineralization rates observed from years of laboratory testing wit...

Metal-organic frameworks (MOFs) have recently attracted enormous interest over the past few years in energy storage and gas separation, yet there have been few reports for adsorption cooling applications. Adsorption cooling technology is an established alternative to mechanical vapor compression refrigeration systems and is an excellent alternative in industrial environments where waste heat is available. We explored the use of MOFs that have very high mass loading and relatively low heats of adsorption, with certain combinations of refrigerants to demonstrate a new type of highly efficient adsorption chiller. Computational fluid dynamics combined with a system level lumped-parameter model have been used to project size and performance for chillers with a cooling capacity ranging from a few kW to several thousand kW. These systems rely on stacked micro/mini-scale architectures to enhance heat and mass transfer. Recent computational studies of an adsorption chiller based on MOFs suggests that a the...

Designing zeolites with tunable physicochemical properties can substantially impact their performance in commercial applications, such as adsorption, separations, catalysis, and drug delivery. Zeolite synthesis typically requires an organic structure-directing agent to produce crystals with specific pore topology. Attempts to remove organics from syntheses to achieve commercially viable methods of preparing zeolites often lead to the formation of impurities. Herein, we present organic-free syntheses of two polymorphs of the small-pore zeolite P (GIS), P1 and P2. Using a combination of adsorption measurements and density functional theory calculations, we show that GIS polymorphs are selective adsorbents for H2 O relative to other light gases (e.g., H2 , N2 , CO2 ). Our findings refute prior theoretical studies postulating that GIS-type zeolites are excellent materials for CO2 separation/sequestration. We also show that P2 is significantly more thermally stable than P1, which broadens the operating conditions for GIS-type zeolites in commercial applications and opens new avenues for exploring their potential use in processes such as catalysis.

Metal-organic frameworks (MOFs) are one of the widely investigated materials of 21st century due to their unique properties such as structural tailorability, controlled porosity, and crystallinity. These exceptional properties make them promising candidates for various applications including gas adsorption and storage, separation, and catalysis. However, commercial applications of MOFs produced by conventional methods including solvothermal or hydrothermal synthesis are rather limited or restricted because they often produce fine powders. The use of MOF powders for industrial applications often results in pressure drop problems similar to the case with zeolites and limited robustness against water. To realize these materials for practical applications, densification of MOFs (by increasing pellet density) is routinely employed to form pellets, extrudates or beads to improve the overall density, volumetric adsorption, mechanical and thermal properties. However, the improvements come with some drawbacks such as reduction in overall porosity, surface area, and gravimetric adsorption capacity. Thus, optimizing the properties of densified MOF's by tuning the pellet density is very crucial for realizing these materials for industrial applications. Methods that increase the packing density in MOFs (for example by intentional interpenetration, etc.), which is different from pellet density, is not the scope of this review. In this review, the properties and applications of densified MOFs with different metal clusters and organic linkers are discussed.

Efficient regeneration of organolithium compounds is a challenging aspect in the process of novel organometathetical catalytic cycles. One of these catalytic cycles is a newly suggested method for Mg production from seawater that capitalizes on the rich chemistry of Grignard reagents. The proposed three-step catalytic cycle with Cp

The low-frequency (100-1250 Hz) acoustic properties of metal-organic framework (MOF) materials were examined in impedance tube experiments. The anomalously high sound transmission loss of HKUST-1, FeBTC, and MIL-53(Al) quantitatively demonstrated that these prototypical MOFs are absorptive acoustic metamaterials. To the best of our knowledge, this is the first example of MOFs that have been demonstrated to be acoustic metamaterials. Low-frequency acoustic dampening by subwavelength MOF metamaterials is likely due to sound dissipation and absorption facilitated by multiple internal reflections within the microporous framework structure. Modification of MIL-53(Al) with flexible organic linkers clarified that acoustic signatures of the MOFs may be tailored to add or alter certain diagnostic acoustic signatures. These results may be applied to the rational design of lightweight sound-insulating construction materials and acoustic contrast agents for subsurface mapping and monitoring applications at low frequency (100-1250 Hz).

Alkali-exchanged SSZ-13 adsorbents were investigated for their applicability in separating N

Chabazite SSZ-13 samples with varying silica content (Si/Al from 5 to ∼20) were synthesized under both stirring and static conditions to obtain materials with changing particle size and morphology and thoroughly analysed using various characterization techniques. The role of particle size and chemical compositions in CO2 and N2 adsorption measurements was investigated. The Si/Al ratio played a major role in CO2 adsorption; Al-rich SSZ-13 demonstrated a higher CO2 uptake than an Al-poor material. This was attributed to the high density of active charged species in the chabazite cage. The particle size also played a role in the sorption capacities; smaller particles, obtained under stirring conditions, showed enhanced CO2 uptake compared to larger particles of similar chemical composition. This was associated with a higher contribution of micropores containing active sites for CO2 adsorption.

In the work described in this paper, we developed simulations of methane production and supercritical carbon dioxide injection that consider competitive sorption of methane (CH 4 ) and carbon dioxide (CO 2 ) on both organic matter and the clay mineral montmorillonite. We used the results of these simulations to assess the potential for storage of CO 2 in a hydraulically fractured shale gas reservoir and for enhanced recovery of CH 4 . Assuming equal volume fractions of organic matter and montmorillonite, amounts of CO 2 adsorbed on both materials were comparable, while methane desorption from clays was greater than desorption from organic material. CO 2 injection simultaneous to CH 4 production in two separate wells enhanced the contribution of methane desorption from 3535 to 6401 metric tons, while storing 82 metric kilotons of CO 2 .

Expandable clays such as montmorillonite have interlayer exchange sites whose hydration state can be systematically varied from near anhydrous to almost bulk-like water conditions. This phenomenon has new significance with the simultaneous implementation of geological sequestration and secondary utilization of CO2 to both mitigate climate warming and enhance extraction of methane from hydrated clay-rich formations. In this study, the partitioning of CO2 and H2O between Na-, Ca-, and Mg-exchanged montmorillonite and variably hydrated supercritical CO2 (scCO2) was investigated using in situ X-ray diffraction (HXRD), infrared (IR) spectroscopic titrations, and quartz crystal microbalance (QCM) measurements. Density functional theory calculations provided mechanistic insights. Structural volumetric changes were correlated to quantified changes in sorbed H2O and CO2 concentrations as a function of percent H2O saturation in scCO2. Intercalation of CO2 is inhibited when the clay is fully collapsed (dehydrated interlayer), peaks sharply with the introduction of some H2O and partial expansion of the interlayer region, and then decreases systematically with further hydration of the clay. This behavior is discussed in the context of recent theoretical calculations of the montmorillonite H2O–CO2 system.

Zeolite HOU-2 (LTA type) is prepared with the highest silica content (Si/Al = 2.1) reported for Na-LTA zeolites without the use of an organic structure-directing agent. The rational design of Si-rich zeolites has the potential to improve their thermal stability for applications in catalysis, gas storage, and selective separations.

The metal organic framework, MOF-74(Ni), was synthesized in a continuous flow microwave-assisted reactor obtaining a high space-time yield (~90 g h−1 L−1) and 96.5% conversion of reagents. Separation of the nucleation and growth steps was performed by using uniform and rapid microwave heating to induce nucleation, which allowed a substantial increase in conversion for shorter reaction times under mild pressure. High yields were achieved in minutes, as opposed to days for typical batch syntheses, with excellent control over the material's properties due to more uniform nucleation, and the separation of the nucleation and growth steps. Optimization of the microwave reactor parameters led to improvements in MOF-74(Ni) crystallinity, reagent conversion, and production rates. Differences in MOF-74(Ni) crystallinity were observed as smaller grains were formed when higher microwave zone temperatures were used. Crystallinity differences led to different final adsorption properties and surface areas. Herein we show that a continuous high space-time yield synthesis of MOF-74(Ni) allows control over nucleation using microwave heating.