420 results on '"Børvik, Tore"'
Search Results
2. Effect of load level on cracking of L-shaped soda-lime glass specimens
3. Modeling brittle crack propagation for varying critical load levels: a dynamic phase-field approach
4. Ductile tearing of aluminium plates: experiments and modelling
5. Investigation of aluminium Whipple Shield response to hypervelocity impacts close to ballistic limit between 2.5 and 5 km/s
6. Sustainable shielding: Ballistic performance of low-carbon concrete
7. A physically based strength prediction model for glass
8. Micromechanics-based simulation of quasi-static and dynamic crushing of double-chamber 6000-series aluminium profiles
9. Capturing fracture initiation and crack propagation of car windshields
10. A gradient-based non-local GTN model: Explicit finite element simulation of ductile damage and fracture
11. The effect of constituent particles on the tear resistance of three 6000-series aluminium alloys
12. An experimental–numerical study on the evolution of the Taylor–Quinney coefficient with plastic deformation in metals
13. Influence of constituent particles on fracture of aluminum alloys under high-triaxiality loading
14. Thin steel plates exposed to combined ballistic impact and partially confined airblast loading
15. Influence of particle content on the ductility of extruded non-recrystallized aluminium alloys subjected to shear loading
16. Ductile failure predictions using micromechanically-based computational models
17. Simulation of ductile fracture in aluminium alloys with random or strong texture using heuristic extensions of the Gurson model
18. On fracture anisotropy in textured aluminium alloys
19. On the strength–ductility trade-off in thin blast-loaded steel plates with and without initial defects — An experimental study
20. A numerical study of a size-dependent finite-element based unit cell with primary and secondary voids
21. Hypervelocity Impact Against Aluminium Whipple Shields in the Shatter Regime with Systematic Parameter Variation: An Experimental and Numerical Study
22. On crystallographic aspects of heterogeneous plastic flow during ductile tearing: 3D measurements and crystal plasticity simulations for AA7075-T651
23. Effects of constituent particle content on ductile fracture in isotropic and anisotropic 6000-series aluminium alloys
24. On the coupling of damage and single crystal plasticity for ductile polycrystalline materials
25. Effect of pre-stretching on the mechanical behaviour of three artificially aged 6xxx series aluminium alloys
26. Experimental and numerical studies of tubular concrete structures subjected to blast loading
27. Fluid-structure interaction effects during the dynamic response of clamped thin steel plates exposed to blast loading
28. Calibration of the modified Mohr-Coulomb fracture model by use of localization analyses for three tempers of an AA6016 aluminium alloy
29. An experimental study on pre-stretched double-chamber 6000-series aluminium profiles subjected to quasi-static and dynamic axial crushing
30. Nanoscale modelling of combined isotropic and kinematic hardening of 6000 series aluminium alloys
31. Micromechanical modelling of ductile fracture in pipeline steel using a bifurcation-enriched porous plasticity model
32. Evaluation of automatic versus material test-based calibrations of concrete models for ballistic impact simulations.
33. Fracture mechanisms in largely strained solids due to surface instabilities
34. Modeling the effect of notch geometry on the deformation of a strongly anisotropic aluminum alloy
35. Rate dependent fracture of monolithic and laminated glass: Experiments and simulations
36. Influence of stress state on plastic flow and ductile fracture of three 6000-series aluminium alloys
37. On the effect of plastic anisotropy, strength and work hardening on the tensile ductility of aluminium alloys
38. Constitutive modeling of a graded porous polymer based on X-ray computed tomography
39. Micromechanics-based identification of a ductile fracture model for three structural steels
40. Low velocity impact on crash components with steel skins and polymer foam cores
41. On the internal blast loading of submerged floating tunnels in concrete with circular and rectangular cross-sections
42. Modelling and simulation of ductile failure in textured aluminium alloys subjected to compression-tension loading
43. Numerical study of ductile failure under non-proportional loading
44. A through-thickness damage regularisation scheme for shell elements subjected to severe bending and membrane deformations
45. Quasi-static behaviour of crash components with steel skins and polymer foam cores
46. Quasi-static and dynamic indentation of offshore pipelines with and without multi-layer polymeric coating
47. Experimental and numerical studies on the structural response of normal strength concrete slabs subjected to blast loading
48. Nanostructure-based finite element analyses of aluminium profiles subjected to quasi-static axial crushing
49. Testing and modelling of annealed float glass under quasi-static and dynamic loading
50. On the ballistic perforation resistance of a sandwich structure with aluminium skins and aluminium foam core
Catalog
Books, media, physical & digital resources
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.