Search

A series of lead(II) complexes incorporating benzoate derivative ligands was prepared: [Pb(2MeOBz)2]n (1), [Pb(2MeOBz)2(H2O)]n (2), [Pb2(1,4Bzdiox)4(DMSO)]n (3), [Pb(1,4Bzdiox)2(H2O)]n (4), [Pb(Pip)2(H2O)]n (5), and [Pb(Ac)(Pip)2(MeOH)]n (6) (2MeOBz: 2-methoxybenzoate; 1,4Bzdiox: 1,4-benzodioxan-5-carboxylate; DMSO: dimethylsulfoxide; Ac: acetate; Pip: piperonylate; MeOH: methanol). All compounds were characterized via elemental analysis, ATR-FTIR spectroscopy, and powder XRD. In addition, the crystal structures of some compounds were elucidated. Compounds 1 and 2, involving 2-methoxybenzoate, were closely related, only differing in the presence of one extra aqua ligand found for the latter. However, this implies key changes in the studied properties, e.g., 2 shows solid-state luminescence that displays a different color as a function of the crystal orientation, while 1 does not. The crystal structure of 2 revealed a 1D coordination polymer. A similar relationship was found between compounds 3 and 4, incorporating 1,4-benzodioxan-5-carboxylate. In this pair, only 4, with aqua ligands, displayed a greenish-yellow-color solid-state luminescence. Furthermore, two new lead(II) piperonylate complexes, 5 and 6, were obtained from the reaction between lead(II) acetate and piperonylic acid. In water, all acetate ligands in the metal precursor were displaced and [Pb(Pip)2(H2O)]n (5) was isolated, while in methanol, a mixed acetate–piperonylate complex, [Pb(Ac)(Pip)2(MeOH)]n (6), was precipitated. Considering only conventional Pb-O bonds, the crystal structure of 6 was described as a 1D coordination polymer, although, additionally, the chains were associated via tetrel bonds, defining an extended 2D architecture.

A facile, fast and green strategy based on ethanol is utilized to prepare a new bioMOF, namely, CaSyr-1, with particular characteristics of full biocompatibility given by using just calcium and syringic acid, the latter being a phenolic natural product found in fruits and vegetables, permanent porosity with an outstanding surface area >1000 m2 g−1, and a micropore diameter of 1.4 nm close to mesopore values. Collectively, these data establish CaSyr-1 as one of the most porous bioMOFs reported to date, with high molecular adsorption capacity. The CaSyr-1 adsorptive behavior is revised here through the reversible adsorption of CO2 and the encapsulation of bioactive ingredients in the structure. Remarkably, CaSyr-1 enables the development of triple therapeutic entities, involving bioactive Ca2+, syringic acid and an impregnated drug.

Two copper(II) complexes, both involving the anionic 3,5-bis(trifluoromethyl)benzoate ligand (TFMBz), have been prepared and their structure elucidated by single crystal-X ray diffraction. [Cu(TFMBz)2(ISNA)2] (1) is a mononuclear complex, in which the sphere of coordination of Cu(II) is completed by two neutral isonicotinamide (ISNA) auxiliary ligands. Hydrogen bonding formed between auxiliary ISNA ligands determines the formation of a 2D supramolecular network. [Cu2(TFMBz)4(DMSO)2] (2) is a binuclear complex, in which the four carboxylate ligands define the typical paddle wheel structure often found in copper complexes, containing also the ancillary dimethyl sulfoxide (DMSO) ligand in axial positions. The elucidated crystallographic data provide the static view of the crystal structures, which reveals only non-interconnected voids for both materials. Even that, compound 1 shows an appreciable adsorption of CO2 at 273 K (ca. 1 CO2 molecule/Cu atom at 100 kPa), concomitant with a reduced adsorption of Ar or N2 under similar conditions, which implies a considerable degree of selectivity for CO2. Moreover, 1 does not adsorb N2 or Ar at 77 K and 100 kPa. This behavior suggests that the stablished intermolecular hydrogen bonds rest flexibility and dynamism to 1 at low temperature. Contrarily, increasing the temperature transient porosity is originated, which allows guest molecules to diffuse through the cavities. Compound 2 shows adsorption of N2 and Ar at 77 K, indicating that vibrations in the network and rotation of some CF3 groups, necessary to favor adsorbate diffusion, are still feasible at this low temperature.

The reaction of [Co2(H2O)(TFMBz)4(py)4] (1) (TFMBz: 3,5-bis(trifluoromethyl)benzoate; py: pyridine) with 4,4′-bipyridine (bpy) in different solvents yields four coordination polymers with unlikely structures but with the same stoichiometry. Three of them contain similar ladder chains consisting of binuclear nodes "Co2(TFMBz)4", in which two of the TFMBz ligands show bidentate bridge coordination, double linked to each adjacent node by bpy but packed in different fashions. The different packing affects the compound porosity; thus, [Co2(TFMBz)4(bpy)2]n(2), precipitated using low-polarity solvents such as supercritical CO2(scCO2), n-butyl acetate, or heptane and also in acetonitrile, is microporous, with a surface area of 330 m2g-1, showing the N2adsorption/desorption isotherm at 77 K with a gate-opening effect at low relative pressures (P/P0= 0.05). The isomer [Co2(TFMBz)4(bpy)2]n(3), synthesized in ethoxyethanol, presents a surface area of 230 m2g-1. A third chain packing isomer, [Co2(TFMBz)4(bpy)2]n(4), is obtained in acetone and has only non-interconnected voids. Finally, precursor 1 is combined with bpy in a highly polar solvent such as water to give [Co(TFMBz)2(bpy)]n(5). In this isomer, all the carboxylate units act as bidentate bridging ligands, generating chains that are interlinked by bpy, leading to a 2D network, which after packing yields a non-porous structure. The resolution of structures 2-5 is only possible with the recently developed 3D electron diffraction method based on the collection of diffraction patterns on sub-micron-sized single crystals. The variation of magnetic susceptibility as a function of temperature is also measured. Overall, our work provides insightful information on the complex landscape of metal-organic framework solids that are formed by crystallization using different solvent media.

The reaction between 2,4,6-tris(4-pyridyl)-1,3,5-triazine (4-tpt) and copper(II) hexafluoroacetylacetone (Cu(hfa)2) yields two different 1D metal–organic frameworks (MOFs), [(Cu(hfa)2)2(4-tpt)]n (1) and [Cu(hfa)2(4-tpt)]n (2). The Cu:4-tpt ratio in the new MOFs is determined by the reaction medium, particularly, the solvent used. The two compounds have been fully characterized, including crystal structure elucidation. [(Cu(hfa)2)2(4-tpt)]n (1), with a 2:1 Cu:4-tpt ratio, could be precipitated in either 1,1,2-trichloroethane or supercritical CO2. In (1), 4-tpt shows a tritopic coordination mode, but only half of the Cu(hfa)2 subunits act as a node, thus connecting two 4-tpt and giving a 1D network. The other half of Cu(hfa)2 subunits are connected only to one pyridine and thus protrude along the chains. The later Cu(hfa)2 fragments show a labile character and can be dissolved in diethyl ether to give the second MOF [Cu(hfa)2(4-tpt)]n (2), with a 1:1 Cu:4-tpt ratio. The compound (2) has also a 1D structure, with all the incorporated copper atoms acting as nodes. In this case, the packing of the chains defines accessible channels, which are perpendicular to the chain axis. After activation, N2 adsorption/desorption measurements at 77 K confirm the microporous character of (2) with an apparent surface area of 190 m2 g−1. Besides, at 273 K this material clearly shows a significant adsorption of CO2 prompted by noncoordinated nitrogen in the triazine linker.

Soft crystallization routes for the controlled growth of oneand two-dimensional Cu(II)-coordination polymers of the type [(Cu- (hfa)2)x(3-tpt)]n (hfa = hexafluoroacetylacetonate, 3-tpt = 2,4,6-tris(3- pyridyl)-1,3,5-triazine) are described. Three volatile solvents with different protic/aprotic characteristics were chosen as the reaction media, e.g., supercritical CO2, chloroform, and ethanol. Five (1−5) new compounds were crystallized, with different structures and Cu(II)/3-tpt ratios. The structures of 3-tpt and five new coordination polymers were elucidated by single-crystal synchrotron X-ray diffraction. A description of the crystallization pathways followed for the synthesis of the individual compounds is given based on the protic or aprotic character of the used solvents and reagents’ solubility constraints. The main novelty of the work relies in establishing the foundations of 3-tpt isomeric control during crystallization through solvent selection. From the five precipitated new compounds, 3 displays a significant framework flexibility, associated with N2 adsorption at low temperature, presenting a stepwise adsorption isotherm. The N2 adsorption process was followed by in situ synchrotron X-ray powder diffraction

The synthesis of 1D cobalt and zinc monometallic and heterometallic coordination polymers (CPs) was carried out applying one-pot synthetic methods by using either supercritical carbon dioxide or ethanol as the solvent. A collection of four 1D CPs were thus obtained by the combination of a metal (or a mixture of metals) with the linker 1,4-bis(4-pyridylmethyl)benzene. The used metallic complexes were zinc and cobalt hexafluoroacetylacetonate, which can easily incorporate pyridine ligands in the coordination sphere of the metal centre. Independently of the used solvent, the precipitated phases involving Zn(II), i.e., homometallic CP of Zn(II) and bimetallic CP of Zn(II)/Co(II), were isostructural. Contrarily, homometallic CPs of Co(II) were precipitated as an isostructural phase of Zn(II) or with a different structure, depending on the used solvent. All the structures were resolved by XRD using synchrotron radiation. In addition, the magnetic properties of the new CPs involving Co(II) were studied. Remarkably, at low temperatures with the application of an external field, they acted as field-induced single molecule magnets.