Search

Atomically thin cuprates exhibiting a superconducting phase transition temperature similar to bulk have recently been realized, although the device fabrication remains a challenge and limits the potential for many novel studies and applications. Here we use an optical pump-probe approach to noninvasively study the unconventional superconductivity in atomically thin Bi$_2$Sr$_2$Ca$_{0.92}$Y$_{0.08}$Cu$_2$O$_{8+{\delta}}$ (Y-Bi2212). Apart from finding an optical response due to the superconducting phase transition that is similar to bulk Y-Bi2212, we observe that the sign and amplitude of the pump-probe signal in the atomically thin flake vary significantly in different dielectric environments depending on the nature of the optical excitation. By exploiting the spatial resolution of the optical probe, we uncover the exceptional sensitivity of monolayer Y-Bi2212 to the environment. Our results provide the first optical evidence for the intralayer nature of the superconducting condensate in Bi2212, and highlight the role of double-sided encapsulation in preserving superconductivity in atomically thin cuprates., Comment: To be published in Nano Letters

Stacking order in van der Waals materials determines the coupling between atomic layers and is therefore key to the materials' properties. By exploring different stacking orders, many novel physical phenomena have been realized in artificial vdW stacks. Recently, 2D ferroelectricity has been observed in zero-degree aligned hBN and graphene-hBN heterostructures, holding promise in a range of electronic applications. In those artificial stacks, however, the single domain size is limited by the stacking-angle misalignment to about 0.1 to 1 $\mu$m, which is incompatible with most optical or optoelectronic applications. Here we show MoS$_2$ in the rhombohedral phase can host a homogeneous spontaneous polarization throughout few-$\mu$m-sized exfoliated flakes, as it is a natural crystal requiring no stacking and is, therefore free of misalignment. Utilizing this homogeneous polarization and its induced depolarization field (DEP), we build a graphene-MoS$_2$ based photovoltaic device with high efficiency. The few-layer MoS$_2$ is thinner than most oxide-based ferroelectric films, which allows us to maximize the DEP and study its impact at the atomically thin limit, while the highly uniform polarization achievable in the commensurate crystal enables a tangible path for up-scaling. The external quantum efficiency of our device is up to 16% at room temperature, over one order larger than the highest efficiency observed in bulk photovoltaic devices, owing to the reduced screening in graphene, the exciton-enhanced light-matter interaction, and the ultrafast interlayer relaxation in MoS$_2$. In view of the wide range of bandgap energy in other TMDs, our findings make rhombohedral TMDs a promising and versatile candidate for applications such as energy-efficient photo-detection with high speed and programmable polarity., Comment: 20 pages, 6 figures

Nonlinear absorption can limit the efficiency of nonlinear optical devices. However, it can also be exploited for optical limiting or switching applications. Thus, characterization of nonlinear absorption in photonic devices is imperative. This work used the nonlinear transmittance technique to measure the two-photon absorption coefficients ($\alpha_2$) of AlGaAs waveguides in the strip-loaded, nanowire, and half-core geometries in the wavelength range from $1480$ to $1560~\text{nm}$. The highest $\alpha_2$ values of $2.4$, $2.3$, and $1.1~\text{cm}/\text{GW}$ were measured at $1480~\text{nm}$ for a $0.8$-nm-wide half-core, $0.6$-nm-wide nanowire, and $0.9$-nm-wide strip-loaded waveguides, respectively, with $\alpha_2$ decreasing with increasing wavelength. The free-carrier absorption cross-section was also estimated from the nonlinear transmittance data to be around $2.2\times10^{-16}~\text{cm}^2$ for all three geometries. Our results contribute to a better understanding of the nonlinear absorption in heterostructure waveguides of different cross-sectional geometries. We discuss how the electric field distribution in the different layers of a heterostructure can lead to geometry-dependent effective two-photon absorption coefficients. More specifically, we pinpoint the third-order nonlinear confinement factor as a design parameter to estimate the strength of the effective nonlinear absorption, in addition to tailoring the bandgap energy by varying material composition.

Plasmonic metasurfaces are promising as enablers of nanoscale nonlinear optics and flat nonlinear optical components. Nonlinear optical responses of such metasurfaces are determined by the nonlinear optical properties of individual nanostructured plasmonic meta-atoms, which are the building blocks of the metasurfaces. Unfortunately, no simple methods exist to determine the nonlinear coefficients (hyperpolarizabilities) of the meta-atoms hindering designing of nonlinear metasurfaces. Here, we develop the equivalent RLC circuit model of such meta-atoms to estimate their second-order nonlinear optical parameter i.e. the first-order hyperpolarizability in the optical spectral range. In parallel, we extract from second-harmonic generation experiments the spectrum of the 1st-order hyperpolarizabilities of individual meta-atoms consisting of asymmetrically shaped (elongated) plasmonic nanoprisms. Moreover, we verify our results using nonlinear hydrodynamic-FDTD and with calculations based on nonlinear scattering theory. All three approaches: analytical, experimental, and computational, yield results that agree very well. Our empirical RLC model can thus be used as a simple tool to enable efficient design of nonlinear plasmonic metasurfaces.

The AlGaAs material platform has been intensively used to develop nonlinear photonic devices on-a-chip, thanks to its superior nonlinear optical properties. We propose a new AlGaAs waveguide geometry, called half-core etched, which represents a compromise between two previously studied geometries, namely the nanowire and strip-loaded waveguides, combining their best qualities. We performed tunable four-wave mixing (FWM) experiments in all three of these geometries in the telecommunications C-band (wavelengths around 1550 nm), with a pulsed pump beam and a continuous-wave (CW) signal beam. The maximum FWM peak efficiencies achieved in the nanowire, strip-loaded and half-core geometries were about -5 dB, -8 dB and -9 dB, respectively. These values are among the highest reported in AlGaAs waveguides. The signal-to-idler conversion ranges were also remarkable: 161 nm for the strip-loaded and half-core waveguides and 152 nm for the nanowire. Based on our findings, we conclude that the half-core geometry is an alternative approach to the nanowire geometry, which has been earlier deemed the most efficient geometry, to perform wavelength conversion in the spectral region above the half-bandgap. Moreover, we show that the half-core geometry exhibits fewer issues associated with multiphoton absorption than the nanowire geometry.

We report on the study of the third-order nonlinear optical interactions in In$_{x}$Ga$_{1-x}$As$_{y}$P$_{1-y}$/InP strip-loaded waveguides. The material composition and waveguide structures were optimized for enhanced nonlinear optical interactions. We performed self-phase modulation, four-wave mixing and nonlinear absorption measurements at the pump wavelength 1568 nm in our waveguides. The nonlinear phase shift of up to $2.5\pi$ has been observed in self-phase modulation experiments. The measured value of the two-photon absorption coefficient $\alpha_2$ was 15 cm/GW. The four-wave mixing conversion range, representing the wavelength difference between maximally separated signal and idler spectral components, was observed to be 45 nm. Our results indicate that InGaAsP has a high potential as a material platform for nonlinear photonic devices, provided that the operation wavelength range outside the two-photon absorption window is selected.

We experimentally demonstrate that the spectral sensitivity of a Mach-Zehnder (MZ) interferometer can be enhanced through structural slow light. We observe a 20 times enhancement by placing a dispersion-engineered-slow-light photonic-crystal waveguide in one arm of a fibre-based MZ interferometer. The spectral sensitivity of the interferometer increases roughly linearly with the group index, and we have quantified the resolution in terms of the spectral density of interference fringes. These results show promise for the use of slow-light methods for developing novel tools for optical metrology and, specifically, for compact high-resolution spectrometers.