Search

Incorporating chiral elements in host-guest systems currently attracts much attention because of the major impact such structures may have in a wide range of applications, from pharmaceuticals to materials science and beyond. Moreover, the development of multi-responsive and -functional systems is highly desirable since they offer numerous benefits. In this context, we describe herein the construction of a metal-driven self-assembled cage that associates a chiral truxene-based ligand and a bis-ruthenium complex. The maximum separation between both facing chiral units in the assembly is fixed by the intermetallic distance within the lateral bis-ruthenium complex (8.4 Å). The resulting chiral cavity was shown to encapsulate polyaromatic guest molecules, but also to afford a chiral triply interlocked [2]catenane structure. The formation of the latter occurs at high concentration, while its disassembly could be achieved by the addition of a planar achiral molecule. Interestingly the planar achiral molecule exhibits induced circular dichroism signature when trapped within the chiral cavity, thus demonstrating the ability of the cage to induce supramolecular chirogenesis., (© 2024 The Authors. Angewandte Chemie International Edition published by Wiley-VCH GmbH.)

Nowadays, synthetic polymers are produced and used in many materials for different applications. Matrix-assisted laser desorption/ionization or electrospray mass spectrometry are classically used to investigate them, but these techniques require sample preparation steps, which are not always suitable for the study of insoluble or formulated polymers. Alternatively, direct real-time (DART) ionization analysis may be conducted without sample preparation. Four polyvinylidene fluoride (PVDF) polymers involving the C 2 H 2 F 2 repeating unit coming from different suppliers have been analyzed by DART Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS) in negative-ion mode. The obtained mass spectra systematically displayed an oligomeric distribution between m / z 400 and 1300 of [M - H] - , [M + O 2 ] •- , and [M + NO 2 ] - ions. Kendrick plots were used to ease the identification of PVDF end-groups and establish a difference between the samples. Both commercial PVDF polymers shared the same α+ω end groups formula, which confirmed a similar polymerization process for their synthesis. The two other PVDFs were clearly different from the commercial ones by the occurrence of specific end-groups. MS/MS and MS 3 experiments were conducted to obtain structural information on these end-groups.

This review provides an overview of the online hyphenation of Fourier Transform Ion Cyclotron Resonance Mass Spectrometry (FT-ICR MS) with separation methods to date. The online coupling between separation techniques (gas and liquid chromatography, capillary electrophoresis) and FT-ICR MS essentially raises questions of compromise and is not look as straightforward as hyphenation with other analyzers (QTOF-MS for instance). FT-ICR MS requires time to reach its highest resolving power and accuracy in mass measurement capabilities whereas chromatographic and electrophoretic peaks are transient. In many applications, the strengths and the weaknesses of each technique are balanced by their hyphenation. Untargeted "Omics" (e.g. proteomics, metabolomics, petroleomics, …) is one of the main areas of application for FT-ICR MS hyphenated to online separation techniques because of the complexity of the sample. FT-ICR MS achieves the required high mass measurement accuracy to determine accurate molecular formulae and resolution for isobar distinction. Meanwhile separation techniques highlight isomers and reduce the ion suppression effects extending the dynamic range. Even if the implementation of FT-ICR MS hyphenated with online separation methods is a little trickier (the art of compromise), this review shows that it provides unparalleled results to the scientific community (the art of the possible), along with raising the issue of its future in the field with the relentless technological progress., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

As RNA post-transcriptional modifications are of growing interest, several methods were developed for their characterization. One of them established for their identification, at the nucleosidic level, is the hyphenation of separation methods, such as liquid chromatography or capillary electrophoresis, to tandem mass spectrometry. However, to our knowledge, no software is yet available for the untargeted identification of RNA post-transcriptional modifications from MS/MS data-dependent acquisitions. Thus, very long and tedious manual data interpretations are required. To meet the need of easier and faster data interpretation, a new user-friendly search engine, called Nucleos'ID, was developed for CE-MS/MS and LC-MS/MS users. Performances of this new software were evaluated on CE-MS/MS data from nucleoside analyses of already well-described Saccharomyces cerevisiae transfer RNA and Bos taurus total tRNA extract. All samples showed great true positive, true negative, and false discovery rates considering the database size containing all modified and unmodified nucleosides referenced in the literature. The true positive and true negative rates obtained were above 0.94, while the false discovery rates were between 0.09 and 0.17. To increase the level of sample complexity, untargeted identification of several RNA modifications from Pseudomonas aeruginosa 70S ribosome was achieved by the Nucleos'ID search following CE-MS/MS analysis.

The conversion of lignocellulosic biomass by pyrolysis or hydrothermal liquefaction gives access to a wide variety of molecules that can be used as fuel or as building blocks in the chemical industry. For such purposes, it is necessary to obtain their detailed chemical composition to adapt the conversion process, including the upgrading steps. Petroleomics has emerged as an integral approach to cover a missing link in the investigation bio-oils and linked products. It relies on ultra-high-resolution mass spectrometry to attempt to unravel the contribution of many compounds in complex samples by a non-targeted approach. The most recent developments in petroleomics partially alter the discriminating nature of the non-targeted analyses. However, a peak referring to one chemical formula possibly hides a forest of isomeric compounds, which may present a large chemical diversity concerning the nature of the chemical functions. This identification of chemical functions is essential in the context of the upgrading of bio-oils. The latest developments dedicated to this analytical challenge will be reviewed and discussed, particularly by integrating ion source features and incorporating new steps in the analytical workflow. The representativeness of the data obtained by the petroleomic approach is still an important issue.

As part of RNA characterization, the identification of post-transcriptional modifications can be performed using hyphenation of separation methods with mass spectrometry. To identify RNA modifications with those methods, a first total digestion followed by a dephosphorylation step are usually required to reduce RNA to nucleosides. Even though effective digestion and dephosphorylation are essential to avoid further complications in analysis and data interpretation, to our knowledge, no standard protocol is yet referenced in the literature. Therefore, the aim of this work is to optimize the dephosphorylation step using a total extract of transfer RNA (tRNA) 1 from B. taurus as a model and to determine and fix two protocols, leading to complete dephosphorylation, based on time and bacterial alkaline phosphatase (BAP) 2 consumptions. Capillary electrophoresis-tandem mass spectrometry (CE-MS/MS) was used to estimate the dephosphorylation efficiency of both protocols on many canonical and modified nucleotides. For a timesaving protocol, we established that full dephosphorylation was obtained after a 4-hour incubation at 37 °C with 7.5 U of BAP for 1 µg of tRNA. And for a BAP-saving protocol, we established that full dephosphorylation was obtained 3.0 U of BAP after an overnight incubation at 37 °C. Both protocols are suitable for quantitative analyses as no loss of analytes is expected. Moreover, they can be widely used for all other RNA classes, including messenger RNA or ribosomal RNA., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier B.V. All rights reserved.)

Homemade capillaries are a very common practice for the users of capillary electrophoresis (CE), notably in CE-UV. With the advent of the capillary electrophoresis-mass spectrometry coupling since the end of the 1980s, several interfaces have been developed. Among those interfaces, the porous tip sprayer allows great sensitivity at nano flow rates and has been used in numerous applications over the past few years. However, the homemade implementation of a suitable capillary for the porous tip sprayer is more challenging. The porous tip is created by etching the bare-fused silica capillary with hydrofluoric acid. Here we describe the complete process of etching bare-fused silica capillaries, from length cutting to quality control of the newly etched capillary., (© 2022. Springer Science+Business Media, LLC, part of Springer Nature.)

The incorporation of a redox-active nickel salen complex into supramolecular structures was explored via coordination-driven self-assembly with homobimetallic ruthenium complexes (bridged by oxalato or 5,8-dihydroxy-1,4-naphthoquinato ligands). The self-assembly resulted in the formation of a discrete rectangle using the oxalato complex and either a rectangle or a catenane employing the larger naphthoquinonato complex. The formation of the interlocked self-assembly was determined to be solvent and concentration dependent. The electronic structure and stability of the oxidized metallacycles was probed using electrochemical experiments, UV-Vis-NIR absorption, EPR spectroscopy and DFT calculations, confirming ligand radical formation. Exciton coupling of the intense near-infrared (NIR) ligand radical intervalence charge transfer (IVCT) bands provided further confirmation of the geometric and electronic structures in solution., (© 2021 Wiley-VCH GmbH.)

The development of methodologies to control on demand and reversibly supramolecular transformations from self-assembled metalla-structures requires the rational design of architectures able to answer to an applied stimulus. While solvent or concentration changes, light exposure or addition of a chemical have been largely explored to provide these transformations, the case of pH sensitive materials is less described. Herein, we report the first example of a pH-triggered dissociation of a coordination-driven self-assembled interlocked molecular link. It incorporates a pH sensitive benzobisimidazole-based ligand that can be selectively protonated on its bisimidazole moieties. This generates intermolecular electrostatic repulsions that reduces drastically the stability of the interlocked structure, leading to its dissociation without any sign of protonation of the pyridine moieties involved in the coordination bonds. Importantly, the dissociation process is reversible through addition of a base., (© 2021 Wiley-VCH GmbH.)

Catalytic liquefaction of lignin is an attractive process to produce fuels and chemicals, but it forms a wide range of liquid products from monomers to oligomers. Oligomers represent an important fraction of the products and their analysis is complex. Therefore, rapid characterization methods are needed to screen liquefaction conditions based on the distribution in monomers and oligomers. For this purpose, UV spectroscopy is proposed as a fast and simple method to assess the composition of lignin-derived liquids. UV absorption and fluorescence were studied on various model compounds and liquefaction products. Liquefaction of Soda lignin was conducted in an autoclave, in ethanol and with Pt/C catalyst (H 2 , 250 °C, 110 bar). Liquids were sampled at isothermal conditions every 30 min for 4 h. UV fluorescence spectroscopy is related to GC-MS, gel-permeation chromatography (GPC), MALDI-TOF MS, and NMR characterizations. A depolymerization index is proposed from UV spectroscopy to rapidly assess the relative distribution of monomers and oligomers., (© 2020 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

The lack of standards to identify oligomeric molecules is a challenge for the analysis of complex organic mixtures. High-resolution mass spectrometry-specifically, Fourier-transform ion cyclotron resonance mass spectrometry (FT-ICR MS)-offers new opportunities for analysis of oligomers with the assignment of formulae (C x H y O z ) to detected peaks. However, matching a specific structure to a given formula remains a challenge due to the inability of FT-ICR MS to distinguish between isomers. Additional separation techniques and other analyses (e.g., NMR spectroscopy) coupled with comparison of results to those from pure compounds is one route for assignment of MS peaks. Unfortunately, this strategy may be impractical for complete analysis of complex, heterogeneous samples. In this study we use computational stochastic generation of lignin oligomers to generate a molecular library for supporting the assignment of potential candidate structures to compounds detected during FT-ICR MS analysis. This approach may also be feasible for other macromolecules beyond lignin., (© 2020 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Rationale: Polybutadiene (PB) is one of the most widely used polymers. Its aging occurs by reaction with oxygen under illumination and may modify its mechanical and/or aesthetic properties. To modify its properties, organic and/or inorganic compounds are generally added to PB. The aging of such composite materials is poorly known., Methods: PB and its mixtures with TiO 2 and/or the Orange 13 pigment are subjected to an accelerated photo-oxidative aging step for one week. The analysis of PB and its composites with regard to their composition and the aging time is carried out by 266 nm and/or 355 nm laser desorption/ionization Fourier transform ion cyclotron resonance mass spectrometry (LDI-FTICR-MS)., Results: Both PB and its degradation products are detected by (+) LDI-FTICR-MS. The oxidation mechanism of PB is not significantly affected by the used organic or inorganic fillers, which results from the cleavage of the polymer chain and the formation of carbonyl compounds. The crosslinking of PB is significantly reduced by the two investigated fillers. Analysis in negative mode [(-) LDI-FTICR-MS] ensures the specific detection of the Orange 13 pigment., Conclusions: LDI-FTICR-MS has demonstrated its ability to provide relevant information on the degradation of polymer-based composites. The main advantages of this approach are its ability to probe the surface, which is specifically affected by photo-oxidation aging processes, and to access the insoluble degradation compounds., (© 2019 John Wiley & Sons, Ltd.)

Developing methodologies for on-demand control of the release of a molecular guest requires the rational design of stimuli-responsive hosts with functional cavities. While a substantial number of responsive metallacages have already been described, the case of coordination-tweezers has been less explored. Herein, we report the first example of a redox-triggered guest release from a metalla-assembled tweezer. This tweezer incorporates two redox-active panels constructed from the electron-rich 9-(1,3-dithiol-2-ylidene)fluorene unit that are facing each other. It dimerizes spontaneously in solution and the resulting interpenetrated supramolecular structure can dissociate in the presence of an electron-poor planar unit, forming a 1:1 host-guest complex. This complex dissociates upon tweezer oxidation/dimerization, offering an original redox-triggered molecular delivery pathway., (© 2020 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Rationale: The chemical composition of the particulate phase of cigarette smoke inhaled by the active smoker is still poorly known in spite of its importance from a health point of view. A non-targeted approach is applied to cigarette smoke particles collected on a quartz filter to obtain an as complete as possible description of this complex mixture., Methods: A home-made smoking machine including devices for volatile organic compounds (VOCs) and particle sampling was used. The validation of the cigarette smoking and cigarette smoke collection procedures was conducted by the quantification of some compounds by gas chromatography/mass spectrometry (GC/MS). The particles were investigated by Fourier transform ion cyclotron resonance mass spectrometry (FTICR-MS) directly after their collection on quartz filters by laser/desorption ionization (LDI) or after extraction with CH 2 Cl 2 by electrospray ionization (ESI)., Results: The determination of the benzene, toluene, ethylbenzene and xylenes (from 2 to 35 μg/cigarette) and nicotine (0.68 ± 0.05 mg/cigarette) validated the used sampling method. The complementarity of the LDI and ESI sources for the cigarette smoke analysis was established. The ESI analyses evidenced polar compounds and components with a pyridine group and LDI ensured the detection of poly-condensed heteroaromatic species. Finally, this methodology was employed to characterize particles from cigarettes with or without flavoring additives., Conclusions: Some insights into the composition of cigarette smoke inhaled by active smokers have been obtained. The ~1750 observed features revealed the huge complexity of cigarette smoke particles and the diversity of the possible associated health issues. Both heteroaromatic and highly oxygenated compounds produced by combustion and pyrolysis have been highlighted., (© 2018 John Wiley & Sons, Ltd.)

The pyrolysis of the lignocellulosic biomass is a promising process to produce biofuels or green chemicals. Specific analytical methods have to be developed in order to better understand the composition of biomass and of its pyrolysis products and therefore to optimize the design of pyrolysis processes. For this purpose, different biomasses (Douglas and Miscanthus) and one biochar were analyzed by laser desorption/ionization Fourier transform ion cyclotron resonance mass spectrometry (LDI FT-ICR MS). This method allowed the biomass and biochar to be analyzed without any sample preparation and with a spatial resolution of about 100 μm. The influence of LDI conditions (laser wavelength and laser irradiance) and the nature of the biomass and biochar on the obtained mass spectrum were investigated. The nature and origin of the observed ions highly depended on LDI conditions. In the softest laser-biomass interaction conditions (low laser irradiance), the detected ions were related to the nature of the investigated biomass. Indeed, the main part of the detected species came from the different biomass subunits and was produced by photolysis of covalent bonds. When more severe laser irradiation conditions were used, the obtained mass spectra gathered the ions relative to (i) the chemical components of the investigated samples, (ii) the recombination products of these species in the gas phase after their ejection from the sample surface, and (iii) the compounds produced by laser pyrolysis of the sample. This was expected to be useful to mimic thermal pyrolysis. Graphical Abstract.

Two M 12 L 6 redox-active self-assembled cages constructed from an electron-rich ligand based on the extended tetrathiafulvalene framework (exTTF) and metal complexes with a linear geometry (Pd II and Ag I ) are depicted. Remarkably, based on a combination of specific structural and electronic features, the polycationic self-assembled Ag I coordination cage undergoes a supramolecular transformation upon oxidation into a three-dimensional coordination polymer, that is characterized by X-ray crystallography. This redox-controlled change of the molecular organization results from the drastic conformational modifications accompanying oxidation of the exTTF moiety., (© 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Ammonia is well suited to favor deprotonation process in electrospray ionization mass spectrometry (ESI-MS) to increase the formation of [M - H] - . Nevertheless, NH 3 may react with carbonyl compounds (aldehyde, ketone) and bias the composition description of the investigated sample. This is of significant importance in the study of complex mixture such as oil or bio-oil. To assess the ability of primary amines to form imines with carbonyl compounds during the ESI-MS process, two aldehydes (vanillin and cinnamaldehyde) and two ketones (butyrophenone and trihydroxyacetophenone) have been infused in an ESI source with ammonia and two different amines (aniline and 3-chloronaniline). The (+) ESI-MS analyses have demonstrated the formation of imine whatever the considered carbonyl compound and the used primary amine, the structure of which was extensively studied by tandem mass spectrometry. Thus, it has been established that the addition of ammonia, in the solution infused in an ESI source, may alter the composition description of a complex mixture and leads to misinterpretations due to the formation of imines. Nevertheless, this experimental bias can be used to identify the carbonyl compounds in a pyrolysis bio-oil. As we demonstrated, infusion of the bio-oil with 3-chloroaniline in ESI source leads to specifically derivatized carbonyl compounds. Thanks to their chlorine isotopic pattern and the high mass measurement accuracy, (+) ESI Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS) unambiguously highlighted them from the numerous C x H y O z bio-oil components. These results offer a new perspective into the detailed molecular structure of complex mixtures such as bio-oils. Graphical Abstract ᅟ.

A proof-of-concept related to the redox-control of the binding/releasing process in a host-guest system is achieved by designing a neutral and robust Pt-based redox-active metallacage involving two extended-tetrathiafulvalene (exTTF) ligands. When neutral, the cage is able to bind a planar polyaromatic guest (coronene). Remarkably, the chemical or electrochemical oxidation of the host-guest complex leads to the reversible expulsion of the guest outside the cavity, which is assigned to a drastic change of the host-guest interaction mode, illustrating the key role of counteranions along the exchange process. The reversible process is supported by various experimental data ( 1 H NMR spectroscopy, ESI-FTICR, and spectroelectrochemistry) as well as by in-depth theoretical calculations performed at the density functional theory (DFT) level., (© 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

The comprehensive description of complex mixtures such as bio-oils is required to understand and improve the different processes involved during biological, environmental or industrial operation. In this context, we have to consider how different ionization sources can improve a non-targeted approach. Thus, the Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS) has been coupled to electrospray ionization (ESI), laser desorption ionization (LDI) and atmospheric pressure photoionization (APPI) to characterize an oak pyrolysis bio-oil. Close to 90% of the all 4500 compound formulae has been attributed to C x H y O z with similar oxygen class compound distribution. Nevertheless, their relative abundance in respect with their double bound equivalent (DBE) value has evidenced significant differences depending on the ion source used. ESI has allowed compounds with low DBE but more oxygen atoms to be ionized. APPI has demonstrated the efficient ionization of less polar compounds (high DBE values and less oxygen atoms). The LDI behavior of bio-oils has been considered intermediate in terms of DBE and oxygen amounts but it has also been demonstrated that a significant part of the features are specifically detected by this ionization method. Thus, the complementarity of three different ionization sources has been successfully demonstrated for the exhaustive characterization by petroleomic approach of a complex mixture., (Copyright © 2017 Elsevier B.V. All rights reserved.)

In a famous experiment Stanley Miller showed that a large number of organic substances can emerge from sparking a mixture of methane, ammonia and hydrogen in the presence of water (Miller, Science 117:528-529, 1953). Among these substances Miller identified different amino acids, and he concluded that prebiotic events may well have produced many of Life's molecular building blocks. There have been many variants of the original experiment since, including different gas mixtures (Miller, J Am Chem Soc 77:2351-2361, 1955; Oró Nature 197:862-867, 1963; Schlesinger and Miller, J Mol Evol 19:376-382, 1983; Miyakawa et al., Proc Natl Acad Sci 99:14,628-14,631, 2002). Recently some of Miller's remaining original samples were analyzed with modern equipment (Johnson et al. Science 322:404-404, 2008; Parker et al. Proc Natl Acad Sci 108:5526-5531, 2011) and a total of 23 racemic amino acids were identified. To give an overview of the chemical variety of a possible prebiotic broth, here we analyze a "Miller type" experiment using state of the art mass spectrometry and NMR spectroscopy. We identify substances of a wide range of saturation, which can be hydrophilic, hydrophobic or amphiphilic in nature. Often the molecules contain heteroatoms, with amines and amides being prominent classes of molecule. In some samples we detect ethylene glycol based polymers. Their formation in water requires the presence of a catalyst. Contrary to expectations, we cannot identify any preferred reaction product. The capacity to spontaneously produce this extremely high degree of molecular variety in a very simple experiment is a remarkable feature of organic chemistry and possibly prerequisite for Life to emerge. It remains a future task to uncover how dedicated, organized chemical reaction pathways may have arisen from this degree of complexity.

Lignin is a potential renewable material for the production of bio-sourced aromatic chemicals. We present the first hydrotreatment of lignin pyrolysis vapors, before any condensation, using inexpensive and sustainable iron-silica (Fe/SiO2 ) and iron-activated carbon (Fe/AC) catalysts. Lignin pyrolysis was conducted in a tubular reactor and vapors were injected in a fixed bed of catalysts (673 K, 1 bar) with stacks to investigate the profile of coke deposit. More than 170 GC-analyzable compounds were identified by GCxGC (heart cutting)/flame ionization detector mass spectrometry. Lignin oligomers were analyzed by very high resolution mass spectrometry, called the "petroleomic" method. They are trapped by the catalytic fixed bed and, in particular, by the AC. The catalysts showed a good selectivity for the hydrodeoxygenation of real lignin vapors to benzene, toluene, xylenes, phenol, cresols, and alkyl phenols. The spent catalysts were characterized by temperature-programmed oxidation, transmission electron microscopy (TEM), and N2 sorption. Micropores in the Fe/AC catalyst are completely plugged by coke deposits, whereas the mesoporous structure of Fe/SiO2 is unaffected. TEM images reveal two different types of coke deposit: 1) catalytic coke deposited in the vicinity of iron particles and 2) thermal coke (carbonaceous particles ≈1 μm in diameter) formed from the gas-phase growth of lignin oligomers., (Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Laser ablation of titanium oxides at 355 nm and ion-molecule reactions between [(TiO(2))(x)](-•) cluster anions and H(2)O or O(2) were investigated by Fourier transform ion cyclotron resonance mass spectrometry (FTICR MS) with an external ion source. The detected anions correspond to [(TiO(2))(x)(H(2)O)(y)OH](-) and [(TiO(2))(x)(H(2)O)(y)O(2)](-•) oxy-hydroxide species with x=1 to 25 and y=1, 2, or 3 and were formed by a two step process: (1) laser ablation, which leads to the formation of [(TiO(2))(x)](-•) cluster anions as was previously reported, and (2) ion-molecule reactions during ion storage. Reactions of some [(TiO(2))(x)](-•) cluster anions with water and dioxygen conducted in the FTICR cell confirm this assessment. Tandem mass spectrometry experiments were also performed in sustained off-resonance irradiation collision-induced dissociation (SORI-CID) mode. Three fragmentation pathways were observed: (1) elimination of water molecules, (2) O(2) loss for radical anions, and (3) fission of the cluster. Density functional theory (DFT) calculations were performed to explain the experimental data., (© American Society for Mass Spectrometry, 2011)

Laser desorption ionization Fourier transform ion cyclotron resonance mass spectrometry (LDI-FTICRMS) was used to investigate particulate matter (PM) associated with mainstream (MSS) and sidestream cigarette smokes (SSS). The high mass resolution and the high mass measurement accuracy allowed a molecular formula for each detected signal in the 150-500 m/z range to be assigned. The high number of peaks observed in mass spectra required additional data processing to extract information. In this context, Kendrick maps and Van Krevelen diagrams were drawn. These postacquisition treatments were used to more easily compare different cigarette smokes: (i) MSS from different cigarettes and (ii) MSS and SSS from the same cigarette. In both ion detection modes, most of the detected species were found to be attributed to C(6-31)H(2-35)N(0-7)O(0-9) compounds. The compounds observed in the study of SSS appeared to be more unsaturated and less oxygenated than those observed when MSS of the same cigarette was investigated.

Laser-based aerosol mass spectrometry in both on-line and off-line modes has become an essential tool to analyze airborne and industrial dust particles. The versatility of laser desorption and/or ionization appears to be a powerful tool to obtain the global composition of environment particles. Laser mass spectrometry to analyze inorganic (elemental and molecular), organic and biological aerosol components without or with a restricted number of preparation steps in both on-line and off-line modes can be regarded as an ideal analytical machine. However, some limitations are associated to this range of mass spectrometry techniques. This review presents the fundamental aspects of laser-based mass spectrometry and the different kinds of analyses, which may be done. A selected number of applications are then given which allows the reader to consider both the capabilities and the drawbacks of laser mass spectrometry to analyze dust environmental particles. Critical discussion is focused on comparison and new trends of these aerosol analytical techniques., (Copyright 2009 Elsevier B.V. All rights reserved.)

Cerium oxyhydroxide cluster anions were produced by irradiating ceric oxide particles by using 355 nm laser pulses that were synchronized with pulses of nitrogen gas admitted to the irradiation chamber. The gas pulse stabilized the nascent clusters that are largely anhydrous [Ce(x)O(y)] ions and neutrals. These initially formed species react with water, principally forming oxohydroxy species that are described by the general formula [Ce(x)O(y)(OH)(z)](-) for which all the Ce atoms are in the IV oxidation state. In general, the extent of hydroxylation varies from a value of three OH per Ce atom when x = 1 to a value slightly greater than 1 for x >or= 8. The Ce(3) and Ce(6) species deviate significantly from this trend: the x = 3 cluster accommodates more hydroxyl moieties compared to neighboring congeners at x = 2 and 4. Conversely, the x = 6 cluster is significantly less hydroxylated than its x = 5 and 7 neighbors. Density functional theory (DFT) modeling of the cluster structures shows that the hydrated clusters are hydrolyzed, and contain one-to-multiple hydroxide moieties, but not datively bound water. DFT also predicts an energetic preference for formation of highly symmetric structures as the size of the clusters increases. The calculated structures indicate that the ability of the Ce(3) oxyhydroxide to accommodate more extensive hydroxylation is due to a more open, hexagonal structure in which the Ce atoms can participate in multiple hydrolysis reactions. Conversely the Ce(6) oxyhydroxide has an octahedral structure that is not conducive to hydrolysis. In addition to the fully oxidized (Ce(IV)) oxyhydroxides, reduced oxyhydroxides (containing a Ce(III) center) are also formed. These become more prominent as the size of the clusters increases, suggesting that the larger ceria clusters have an increased ability to accommodate a reduced Ce(III) moiety. In addition, the spectra offer evidence for the formation of superoxide derivatives that may arise from reaction of the reduced oxyhydroxides with dioxygen. The overall intensity of the clusters tends to monotonically decrease as the cluster size increases; however, this trend is interrupted at Ce(13), which is significantly more stable compared to neighboring congeners, suggesting formation of a dehydrated Keggin-type structure.

[M(4)(SC(6)H(5))(10)][(CH(3))N](2), [M(10)L(4)(SC(6)H(5))(16)][(CH(3))N](4) and [Cd(17)S(4)(SC(6)H(5))(28)][(CH(3))N](2)(M = Cd or Zn, and L = S or Se) zinc and cadmium thiophenolates have been studied by electrospray ionization (ESI) Fourier transform ion cyclotron resonance (FTICR) mass spectrometry (ESI-FTICRMS) and tandem ESI-FTICRMS (ESI-FTICRMS(n)). ESI-FTICRMS demonstrated its ability to characterize and study such compounds, which may be used as precursors of II-VI nanomaterials. The obtained mass spectrum has been found to be highly relevant of the investigated thiophenolate and the fragmentation behavior of some of the detected ions is indicative of its stability. More specifically, it has been demonstrated that ESI in-source activation or fragmentation experiments conducted in the Fourier transform ion cyclotron resonance mass spectrometry (FTICRMS) cell induced the formation of a very stable entity, which corresponds to the general formula M(4)L(4) (M = Zn or Cd and L = S or Se). The elimination of SC(6)H(5)(-) and/or M(SC(6)H(5))(2) moieties by various activation processes from the studied thiophenolates led systematically to this structure., (2009 John Wiley & Sons, Ltd.)

Five well-known active naphtodianthrone constituents of Hypericum perforatum (St John's Wort) extracts have been investigated by electrospray ionization Fourier transform ion cyclotron resonance mass spectrometry (ESI-FTICRMS) and ESI-FTICRMSn. The studied compounds were hypericin, pseudohypericin, protohypericin, protopseudohypericin (biosynthetic precursors of the two former compounds, respectively) and isopseudohypericin (alkaline degradation product of pseudohypericin). Dissociation mass spectrometry measurements performed on the [M-H]- ion presented a variable efficiency as a function of the used activation mode. Sustained off-resonance irradiation collision-induced dissociation (SORI-CID) only led to a restricted number of fragment ions. In contrast, IRMPD ensured the detection of numerous product ions. Ions detected in ESI-FTICRMS and ESI-FTICRMSn experiments were measured with a very high mass accuracy (typically mass error is lower than 0.5 mDa at m/z close to 500) that allowed unambiguous formulae to be assigned to each signal observed in a mass spectrum. In spite of similar structures, specific fragmentation patterns were observed for the different compounds investigated. This study may be useful in the future to characterize in natural extracts these compounds (or derivatives of these compounds) by liquid chromatography/tandem mass spectrometry (LC/MS/MS) experiments by considering the MS/MS transitions highlighted in this paper., (Copyright (c) 2009 John Wiley & Sons, Ltd.)

Diphenyldithiophosphinate (DTP) ligands modified with electron-withdrawing trifluoromethyl (TFM) substitutents are of high interest because they have demonstrated potential for exceptional separation of Am (3+) from lanthanide (3+) cations. Specifically, the bis( ortho-TFM) (L 1 (-)) and ( ortho-TFM)( meta-TFM) (L 2 (-)) derivatives have shown excellent separation selectivity, while the bis( meta-TFM) (L 3 (-)) and unmodified DTP (L u (-)) did not. Factors responsible for selective coordination have been investigated using density functional theory (DFT) calculations in concert with competitive dissociation reactions in the gas phase. To evaluate the role of (DTP + H) acidity, density functional calculations were used to predict p K a values of the free acids (HL n ), which followed the trend of HL 3 < HL 2 < HL 1 < HL u. The order of p K a for the TFM-modified (DTP+H) acids was opposite of what would be expected based on the e (-)-withdrawing effects of the TFM group, suggesting that secondary factors influence the p K a and nucleophilicity. The relative nucleophilicities of the DTP anions were evaluated by forming metal-mixed ligand complexes in a trapped ion mass spectrometer and then fragmenting them using competitive collision induced dissociation. On the basis of these experiments, the unmodified L u (-) anion was the strongest nucleophile. Comparing the TFM derivatives, the bis( ortho-TFM) derivative L 1 (-) was found to be the strongest nucleophile, while the bis( meta-TFM) L 3 (-) was the weakest, a trend consistent with the p K a calculations. DFT modeling of the Na (+) complexes suggested that the elevated cation affinity of the L 1 (-) and L 2 (-) anions was due to donation of electron density from fluorine atoms to the metal center, which was occurring in rotational conformers where the TFM moiety was proximate to the Na (+)-dithiophosphinate group. Competitive dissociation experiments were performed with the dithiophosphinate anions complexed with europium nitrate species; ionic dissociation of these complexes always generated the TFM-modified dithiophosphinate anions as the product ion, showing again that the unmodified L u (-) was the strongest nucleophile. The Eu(III) nitrate complexes also underwent redox elimination of radical ligands; the tendency of the ligands to undergo oxidation and be eliminated as neutral radicals followed the same trend as the nucleophilicities for Na (+), viz. L 3 (-) < L 2 (-) < L 1 (-) < L u (-).

Laser ablation of transition-metal oxides have been investigated to better understand the formation processes of inorganic cluster ions. The study of binary oxide mixtures and the relative distribution of the ions produced suggest three salient mechanisms that occur after laser/matter interaction, that function to produce the observed ensemble of ionic species. Molecular recombination reactions, unimolecular dissociation processes, emission of small neutrals, including molecular oxygen from transition-metal oxide samples, or from species expelled in gas phase appear to be a significant mechanism, especially under high laser irradiance conditions. These processes are used to propose a set of pathways to rationalize the envelope of ionic clusters formed under photon bombardment.

The combination of a laser with a Fourier transform ion cyclotron resonance mass spectrometer (FTICRMS) enables a variety of MS experiments to be conducted. The laser can be used either as an intense photonic source for the photoionization of neutral species introduced in a variety of ways into the FTICR cell, or it can be made to directly interact with a solid, generating gas-phase ions. Depending on the experimental conditions used, various laser-matter interactions can occur. When high laser energy (also referred to as power density or irradiance) is used, laser ablation (LA) processes lead to the release of species into the gas phase, a significant fraction of which are ionic. The number of ions decreases with the irradiance. For low irradiance values, the so-called laser desorption (LD) regime applies, where the expelled species are mainly neutrals. LA-FTICRMS and LD-FTICRMS can be used to study a wide range of materials, including mineral, organic, hybrid and biological compounds (although matrix-assisted laser desorption ionization, MALDI, which is not reviewed in this paper, is more commonly applied to biological compounds). This paper will review a selection of methodological developments and applications in the field of laser ionization FTICRMS, LD-FTICRMS, and LA-FTICRMS for the analysis of organics and inorganics in complex mixtures, emphasizing insoluble materials. Specifically, silicate- and carbon-based complex materials as well as organic compounds will be examined due to their relevance to natural environmental and anthropogenic matrices.

Most of the first-row transition-metal oxides, M(A)O(B) (M = Sc, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn) were examined by static secondary ion mass spectrometry (s-SIMS) and laser ablation/ionization Fourier transform ion cyclotron resonance mass spectrometry (LA-FTICRMS). Positive and negative ions show strong correlation between the studied oxide and the detected cluster ions. Specific M(x)O(y) (+/-) species were systematically observed with both MS techniques for each investigated M(A)O(B) transition-metal oxide. Moreover, the ion composition and ion distribution are greatly dependent on the ionization technique. Laser ablation (LA)/ionization leads to larger cluster ions (ionic species with nearly hundred atoms were in particular detected for Sc2O3 and Y2O3 oxides), whereas hydrogenated, dihydrogenated, and sometimes trihydrogenated species were observed in s-SIMS. However, the ion distribution for a given M(x)O(y) (+/-) ion series (i.e. ions including the same number of metal atoms M) generally presented important similarities in both techniques.Finally, it was demonstrated that the chemical state of metal atoms in the observed ionic species is closely dependent on the metal electronic valence shell. High valence states (+III, +IV, +V, and +VI) are favored for metals with a less-than-half full valence shell configuration, whereas for other first-row transition metals (manganese, iron, cobalt, nickel, copper and zinc) lower metal valence states (0, +I or, +II) are involved., (Copyright (c) 2006 John Wiley & Sons, Ltd.)

Since the discovery of the Phillips catalysts, there still is much uncertainty concerning their activation, their molecular structure, the nature of the active chromium sites, and the polymerization mechanisms. Surface techniques are not easy to be used for such study according to the nonconductive behavior of the support. Therefore, model Phillips catalyst is elaborated by spin coating a trivalent chromium precursor on a silicon wafer. The surface characterization of this model catalyst is conducted by laser ablation mass spectrometry (LA-MS), laser desorption/ionization mass spectrometry (LDI-MS), and static secondary ion mass spectrometry (s-SIMS), at different steps of its preparation. To validate our approach, a comparison is also made between the model and the real Philips catalyst. Moreover, the model catalyst efficiency for polyethylene synthesis is evaluated and allows us to discuss the validity of the mechanisms previously proposed to explain the catalytic process. The characterization of Phillips model catalyst by mass spectrometry allows us to better understand the activation processes of such catalyst. Depending on the activation temperature, chromium oxide species are formed and anchored at the support surface. They consist mainly in mono-chromium sites at high temperature. The chromium valence is hexavalent. This model catalyst is active for the polymerization of ethylene. A pseudo-oligomer molecular weight distribution is observed by LA-MS, whereas s-SIMS allows us to elucidate the anchorage of the polymer at activate chromium surface sites.

Stainless steel factories are known to release particles into the atmosphere. Such particulate matter contains significant amounts of heavy metals or toxic inorganic compounds and organic pollutants such as, for example, Cr(VI) and polycyclic aromatic hydrocarbons (PAHs). The investigation of Cr(VI) and PAHs is often complicated by the associated matrix. Organic and inorganic pollutants present in stainless steel dust particles have been investigated with the same laser microprobe mass spectrometer according to two original methodologies. These analytical methods do not require time-consuming pretreatment (extraction, solubilization) or preconcentration steps. More specifically, experiments are conducted with a Fourier transform ion cyclotron resonance mass spectrometer coupled to an ArF (193 nm) or a tripled frequency Nd-YAG (355 nm) laser. Experiments at 355 nm allow the nature of the most frequently occurring Cr(III)/Cr(VI) compounds in dust particles to be identified. Examination of PAHs at 193 nm is assisted by the formation of pi-complexes with 7,7',8,8'-tetracyanoquinodimethane to prevent their evaporation in the mass spectrometer during analysis and to ensure an increase in sensitivity., (Copyright 2005 John Wiley & Sons, Ltd.)