Search

The main features and results of a numerical investigation of molten microdroplet impact and solidification on a colder flat substrate of the same material that melts due to the energy input from the impacting molten material are described. The molten volume is determined and presented as a function of time for various combinations of thermal and fluid dynamics parameters.

The basic problem of the impact and solidification of molten droplets on a substrate is of central importance to a host of processes. The experimental results on the transient fluid dynamics and solidification of molten microdroplets impacting on a substrate at the time varying between 150(mu)s and 350(mu)s, and length scales that are directly relevant to the novel solder jetting technology are described.

Presented here is a novel microbeam technology—the Flow-And-ShooT (FAST) microbeam—under development at RARAF. In this system, cells undergo controlled fluidic transport along a microfluidic channel intersecting the microbeam path. They are imaged and tracked in real-time, using a high-speed camera and dynamically targeted, using a magnetic Point and Shoot system. With the proposed FAST system, RARAF expects to reach a throughput of 100 000 cells per hour, which will allow increasing the throughput of experiments by at least one order of magnitude. The implementation of FAST will also allow the irradiation of non-adherent cells (e.g. lymphocytes), which is of great interest to many of the RARAF users. This study presents the design of a FAST microbeam and results of first tests of imaging and tracking as well as a discussion of the achievable throughput. [ABSTRACT FROM PUBLISHER]

Understanding and controlling the deposition of a molten microdroplet on a colder substrate with simultaneous beat transfer and solidification is of central importance to a host of technologies, exemplified by novel methods of electronic microchip manufacturing. The physics of the interfacial phenomena involved are to date only partially understood. For instance, the transient resistance to heat transfer at the droplet-substrate interface cannot be quantified theoretically, and adequate experimental data are lacking. Serious obstacles to experimental determination are the very short time and length scales involved (of the order of micrometerss and microseconds). In the present article, a numerical modeling for droplet impact and solidification based on the Navier-Stokes and energy equations t susedth order to reproduce transient measurements of the deposition of a eutectic Pb-Sn microdroplet on a multilayer ... wafer. The resistance to heat transfer at the droplet-wafer interface and the surface energy of the molten microdroplet are determined by matching numerical and experimental results. This successfully demonstrated indirect method is of interest if direct transient thermal resistance data are not available (as is very often the case). [ABSTRACT FROM AUTHOR]

Blood is a highly complex fluid with rheological properties that have a significant impact on various flow phenomena. In particular, it exhibits a non-Newtonian elongational viscosity that is comparable to polymer solutions. In this study, we investigate the effect of three different anticoagulants, namely EDTA (ethylene diamine tetraacetic acid), heparin, and citrate, on the elongational properties of both human and swine blood. We observe a unique two stage thinning process and a strong dependency of the characteristic relaxation time on the chosen anticoagulant, with the longest relaxation time and thus the highest elongational viscosity being found for the case of citrate. Our findings for the latter are consistent with the physiological values obtained from a dripping droplet of human blood without any anticoagulant. Furthermore, our study resolves the discrepancy found in the literature regarding the reported range of characteristic relaxation times, confirming that the elongational viscosity must be taken into account for a full rheological characterization of blood. These results have important implications for understanding blood flow in various physiological, pathological and technological conditions.

There is an apparent paradox that the likelihood ratio (LR) approach is an appropriate measure of the weight of evidence when forensic findings have to be evaluated in court, while it is typically not used by bloodstain pattern analysis (BPA) experts. This commentary evaluates how the scope and methods of BPA relate to several types of evaluative propositions and methods to which LRs are applicable. As a result of this evaluation, we show how specificities in scope (BPA being about activities rather than source identification), gaps in the underlying science base, and the reliance on a wide range of methods render the use of LRs in BPA more complex than in some other forensic disciplines. Three directions are identified for BPA research and training, which would facilitate and widen the use of LRs: research in the underlying physics; the development of a culture of data sharing; and the development of training material on the required statistical background. An example of how recent fluid dynamics research in BPA can lead to the use of LR is provided. We conclude that an LR framework is fully applicable to BPA, provided methodic efforts and significant developments occur along the three outlined directions., (© 2021 The Authors. Journal of Forensic Sciences published by Wiley Periodicals LLC on behalf of American Academy of Forensic Sciences.)

Cast-off spatter patterns exhibit linear trails of elliptical stains. These characteristic patterns occur by centrifugal forces that detach drops from a swinging object covered with blood or other liquid. This manuscript describes a method to reconstruct the motion, or swing, of the object. The method is based on stain inspection and Euclidean geometry. The reconstructed swing is represented as a three-dimensional region of statistical likelihood. The reconstruction uncertainty corresponds to the volume of the reconstructed region, which is specific to the uncertainties of the case at hand. Simple numerical examples show that the reconstruction method is able to reconstruct multiple swings that are either intersecting or adjacent to each other. The robustness, spatial convergence, computing time of the reconstruction method is characterized. For the purpose of this study, about 20 cast-off experiments are produced, with motion of the swinging object documented using video and/or accelerometers. The swings follow circular or arbitrary paths, and are either human- or machine-made. The reconstruction results are compared with the experimentally documented swings. Agreement between measured and reconstructed swings is very good, typically within less than 10 cm. The method used in this study is implemented as a numerical code written in an open source language, provided in an open access repository, for purposes of transparency and access., Competing Interests: Declaration of Competing Interest There are no conflicts of interest., (Copyright © 2020 Elsevier B.V. All rights reserved.)

The forensics discipline of bloodstain pattern analysis plays an important role in crime scene analysis and reconstruction. One reconstruction question is whether the blood has been spattered via gunshot or blunt impact such as beating or stabbing. This paper proposes an automated framework to classify bloodstain spatter patterns generated under controlled conditions into either gunshot or blunt impact classes. Classification is performed using machine learning. The study is performed with 94 blood spatter patterns which are available as public data sets, designs a set of features with possible relevance to classification, and uses the random forests method to rank the most useful features and perform classification. The study shows that classification accuracy decreases with the increasing distance between the target surface collecting the stains and the blood source. Based on the data set used in this study, the model achieves 99% accuracy in classifying spatter patterns at distances of 30 cm, 93% accuracy at distances of 60 cm, and 86% accuracy at distances of 120 cm. Results with 10 additional backspatter patterns also show that the presence of muzzle gases can reduce classification accuracy., (© 2020 American Academy of Forensic Sciences.)

Nonwetting surfaces engineered from intrinsically hydrophilic metallic materials are promising for self-cleaning, anti-icing, or condensation heat transfer applications where the durability of commonly applied hydrophobic coatings is an issue. In this work, we fabricate and study the wetting behavior and the condensation performance on two metallic nonwetting surfaces with varying number and size of roughness tiers without the need for further hydrophobic coating procedure. On one hand, the surface resembling a rose petal exhibits a sticky nonwetting behavior as drops wet the microscopic roughness features with consequent enhanced drop adhesion, which leads to filmwise condensation. On the other hand, the surface resembling a lotus leaf provides super-repellent nonwetting behavior prompting the continuous nucleation, growth, and departure of spherical drops in a dropwise condensation fashion. On a lotus leaf surface, the third nanoscale roughness tier (created by chemical oxidation) combined with ambience exposure prompts the growth of drops in the Cassie state with the benefit of minimal condensate adhesion. The two different condensation behaviors reported are well supported by a drop surface energy analysis, which accounts for the different wetting performance and the surface structure underneath the condensing drops. Further, we coated the above-mentioned surfaces with polydimethylsiloxane, which resulted in filmwise condensation due to the smoothening of the different roughness tiers. Continuous dropwise condensation on a hierarchical bioinspired lotus leaf metallic surface without the need for a conformal hydrophobic coating is hence demonstrated, which offers a novel path for the design and manufacture of noncoated metallic super-repellent surfaces for condensation phase change applications, among others.

The bloodstain pattern analyst sometimes has to judge if a given stain could originate from a specific location. A wide range of values of the maximum distance that a blood drop can travel have been reported from experiments, ranging from less than one meter to more than 10 m. Here we formulate the problem in a fluid dynamics and data mining framework. The fluid dynamics is solved with Newton's classical equation of motion coupled with well-established models for the gravity and drag forces that bend the trajectories of drops. The parameters screened are the drop size, initial velocity and launch angle, as well as the height of a blood source and the ceiling height. Combining a wide range of values of those five parameters commended the performance of more than 5 million fluid dynamic simulations. Results of these simulations have been searched and mined for parameters directly measurable on a crime scene, such as the stain size and stain ellipticity. The results are presented in simple, easy to use charts, which do not require any knowledge of fluid dynamics from the analyst., (Copyright © 2019. Published by Elsevier B.V.)

Trajectory reconstruction in bloodstain pattern analysis is currently performed by assuming that blood drop trajectories are straight along directions inferred from stain inspection. Recently, several attempts have been made at reconstructing ballistic trajectories backwards, considering the effects of gravity and drag forces. Here, we propose a method to reconstruct the region of origin of impact blood spatter patterns that considers fluid dynamics and statistical uncertainties. The fluid dynamics relies on defining for each stain a range of physically possible trajectories, based on known physics of how drops deform, both in flight and upon slanted impact. Statistical uncertainties are estimated and propagated along the calculations, and a probabilistic approach is used to determine the region of origin as a volume most compatible with the backward trajectories. A publicly available data set of impact spatter patterns on a vertical wall with various impactor velocities and distances to target is used to test the model and evaluate its robustness, precision, and accuracy. Results show that the proposed method allows reconstruction of bloodletting events with distances between the wall and blood source larger than ∼1 m. The uncertainty of the method is determined, and its dependency on the distance between the blood source and the wall is characterized. Causes of error and uncertainty are discussed. The proposed method allows the consideration of stains indicating impact velocities that point downwards, which are typically not used for determining the height of the origin. Based on the proposed method, two practical recommendations on crime scene documentation are drawn., (Copyright © 2019. Published by Elsevier B.V.)

This is a data set of blood spatter patterns scanned at high resolution, generated in controlled experiments. The spatter patterns were generated with a rifle or a handgun with varying ammunition. The resulting atomized blood droplets travelled opposite to the bullet direction, generating a gunshot backspatter on a poster board target sheet. Fresh blood with anticoagulants was used; its hematocrit and temperature were measured. The main parameters of the study were the bullet shape, size and speed, and the distance between the blood source and target sheet. Several other parameters were explored in a less systematic way. This new and original data set is suitable for training or research purposes in the forensic discipline of bloodstain pattern analysis.

This is a data set of 61 blood spatter patterns scanned at high resolution, generated by controlled impact events corresponding to forensic beating situations. The spatter patterns were realized with two test rigs, to vary the geometry and speed of the impact of a solid object on a blood source - a pool of blood. The resulting atomized blood droplets travelled a set distance towards a poster board sheet, creating a blood spatter. Fresh swine blood was used; its hematocrit and temperature were measured. Main parameters of the study were the impact velocity and the distance between blood source and target sheet, and several other parameters were explored in a less systematic way. This new and original data set is suitable for training or research purposes in the forensic discipline of bloodstain pattern analysis.

Bloodstains and bloodstain patterns are often observed at crime scenes and their analysis through bloodstain pattern analysis (BPA) can assist in reconstructing crime scenes. However, most published work related to BPA only deals with hard, non-porous surfaces and none of the studies have carefully characterized carpets. Soft and porous carpets are often encountered at crime scenes since they are common in American homes accounting for 51% of total U.S. flooring market; this has motivated the research described herein. To assess fluid penetration into tufted carpers, a new method for determining porosity and pore size distribution in tufted carpets has been developed for bloodstains on carpet. In this study, three kinds of nylon carpet were used: a low, a medium and a high face-weight carpet. Each carpet had an antistain treatment, which was removed from half of each carpet by steam-cleaning with a pH 12 NaOH solution. This resulted in six carpet samples. Yarn twist, carpet weight, pile height, water contact angles on carpets, water contact angles on individual fibers, and fiber cross-sectional shapes were characterized. Porosity and pore size distribution were analyzed using confocal laser scanning microscopy (CLSM). Porcine blood was used as a human blood substitute at three liquid volumes (30μL, 10μL, and 2μL). Analysis showed that porous carpet construction and antistain finishing both affected penetration. The depth of blood penetration decreased with the increase of carpet face-weight but increased with increased drop height. The removal of antistain treatment increased blood penetration into the carpets and changed the pore size distribution. Effects of antistain treatment, porosity and pore size distribution of tufted carpet, and blood wicking behaviors on carpets were found to strongly affect blood penetration into the carpets., (Copyright © 2018 Elsevier B.V. All rights reserved.)

Bloodstain pattern analysis considers stains on various porous and non-porous surfaces, for the purpose of crime scene reconstruction. On non-porous surfaces, several studies relate the impact conditions of drops to the inspection of stain shapes. Stains on porous surfaces like fabrics have been relatively less explored. The phenomenon of imbibition of blood into the fabric after impact adds further complexity in retrieving information on the impacting conditions. The present work studies experimentally and numerically the formation of drip stains on a woven fabric. The proposed methodology first relies on Darcy's law to measure the imbibition characteristics of the fabric through a set of simple imbibition experiments. Next, the fabric properties are fed into a numerical model to predict the growth of the bloodstain after impact of a droplet. Experiments at different drop release heights and impact angles are compared with the numerical simulations. The uncertainties induced by the fabric on the determination of the impact and directional angles are explained and quantified., (Copyright © 2017 Elsevier B.V. All rights reserved.)

Trajectory reconstruction from inspection of bloodstain patterns is relevant to crime scene investigation. While the influence of target properties on trajectory reconstruction has been often qualitatively discussed, it has rarely been quantified. Similarly, a few impact studies measure the viscosity of the blood used in impact experiments. In this work, the impact of blood drops is investigated on targets with a range of surface roughness and surface material. The maximum spreading is characterized using a spreading correlation, which relates the ratio of stain diameter to drop diameter with the non-dimensional numbers Reynolds number and Ohnesorge number. The process for obtaining individual spreading correlations for each of the target substrates and for measuring the viscosity of the respective blood samples is described extensively. The error in estimating the drop release height, associated with using an impact correlation unspecific to the target of interest, is estimated analytically and numerically using experimental data. A similar analysis is done when the hematocrit of the blood is assumed rather than measured. Both assumptions lead to significant errors in estimating the release height of a blood droplet., (Copyright © 2016. Published by Elsevier Ireland Ltd.)

Following a recent trend of scientific studies on artwork, we study here the thermodynamics of a thermometer made of zisha ceramic, related to the Chinese tea culture. The thermometer represents a boy who "urinates" shortly after hot water is poured onto his head. Long jetting distance is said to indicate that the water temperature is hot enough to brew tea. Here, a thermodynamic model describes the jetting phenomenon of that pee-pee boy. The study demonstrates how thermal expansion of an interior air pocket causes jetting. A thermodynamic potential is shown to define maximum jetting velocity. Seven optimization criteria to maximize jetting distance are provided, including two dimensionless numbers. Predicted jetting distances, jet durations, and temperatures agree very well with infrared and optical measurements. Specifically, the study confirms that jetting distances are sensitive enough to measure water temperature in the context of tea brewing. Optimization results show that longer jets are produced by large individuals, with low body mass index, with a boyhood of medium size inclined at an angle π/4. The study ends by considering the possibility that ceramic jetting artifacts like the pee-pee boy might have been the first thermometers known to mankind, before Galileo Galilei's thermoscope.

This comparative review highlights the relationships between the disciplines of bloodstain pattern analysis (BPA) in forensics and that of fluid dynamics (FD) in the physical sciences. In both the BPA and FD communities, scientists study the motion and phase change of a liquid in contact with air, or with other liquids or solids. Five aspects of BPA related to FD are discussed: the physical forces driving the motion of blood as a fluid; the generation of the drops; their flight in the air; their impact on solid or liquid surfaces; and the production of stains. For each of these topics, the relevant literature from the BPA community and from the FD community is reviewed. Comments are provided on opportunities for joint BPA and FD research, and on the development of novel FD-based tools and methods for BPA. Also, the use of dimensionless numbers is proposed to inform BPA analyses., (Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.)