Search

Before clinical trials are initiated, studying the mechanical performance of modern CAD/CAM restorative materials exposed to aging conditions would provide insights on their performance in service. This study evaluated the impact of thermomechanical aging on various resin composite, ceramic, hybrid, and nano-filled resin composite materials after two polymerization modes. Specimens (3 × 4 × 14 mm3) were fabricated using (n = 12 per group) a universal composite (Filtek Supreme XTE photo-polymerized for either 40 s or 120 s per layer), hybrid ceramics (BRILLIANT Crios, GC Cerasmart, Lava Ultimate, VITA ENAMIC), glass ceramics (IPS e.max CAD, VITA Suprinity PC, Straumann n!ce), or feldspar ceramics (VITABLOCS Mark II, GC Initial LRF). In each group, half of the specimens underwent thermomechanical aging. A three-point bending test was applied to all specimens and the results were statistically analyzed (α = 0.05). Glass ceramics and hybrid ceramics presented higher flexural strength values than feldspar ceramics and the universal composite before and after aging (p < 0.05). Thermomechanical cycling affected the flexural strength of all materials (p < 0.05) except Lava Ultimate, Straumann n!ce, and GC Initial (p > 0.05). The highest decrease in flexural strength after aging was found in the universal composite (40 s polymerization) (p < 0.001) and Vita Enamic (p < 0.001), while the lowest decrease was in the hybrid ceramics, Cerasmart and Lava Ultimate (p < 0.05). Extending polymerization duration reduced the aging effect on the universal composite tested. Thermomechanical aging affected the flexural strength of most materials tested. Universal composites and feldspar ceramics presented similar flexural strength values. [ABSTRACT FROM AUTHOR]

Purpose: To evaluate the effects of acidic solutions on the surface roughness (SR) and surface microhardness (SMH) of indirect restorative materials by analyzing in vivo and in vitro studies.Materials and Methods: Studies comparing the SR and SMH of indirect restorative materials after erosion were included in the meta-analysis. Meta-analyses were conducted with a random-effects model at a significance level of P < .05 using Review Manager software (Cochrane Collaboration). The literature search was conducted using Web of Science, MEDLINE (PubMed), and the Cochrane Library, with no limitations on publication year.Results: Of the 1,097 potentially relevant studies, 32 full-text articles were assessed for eligibility. A total of 16 articles were included in the systematic review, and 15 were included in the meta-analyses. The kappa score between the two reviewers was 0.80. The effects of erosion on ceramics, indirect composites, and hybrid ceramics were evaluated by immersion in or rinsing with acidic solutions (eg, hydrochloric acid [HCl], cola drinks, and juices). An increase in the SR (Ra values) (P < .00001; mean difference [MD] = -0.04; 95% CI = -0.06 to -0.03) and a decrease in the SMH (Vickers microhardness) (P < .00001; MD = 13.94; 95% CI = 12.33 to 15.55) were found after erosion. Subgroup analyses revealed that in vitro erosion led to significantly higher Ra values and lower VHN values than in vivo erosion; cola drinks and juices led to more surface degradation than HCl; and the SR and SMH of polymer-infiltrated ceramic network (PICN) materials remained unchanged after erosion.Conclusion: After acidic challenges, a significantly rougher and softened surface was found for indirect restorative materials. Among all the indirect restorative materials, PICN showed the best acid resistance. Nevertheless, the changes in the SR and SMH of indirect restorative materials after erosion detected in the present study were minor and may not have any clinical significance. [ABSTRACT FROM AUTHOR]

Purpose: Antibiotics play an important role in treating periodontal diseases. Due to the effectiveness of antibiotic therapies, their usage in dentistry has significantly increased. The aim of this study focused on the in-vitro susceptibility of different gram-negative oral bacteria species -- which are associated with periodontal diseases (Fusobacterium spp., Capnocytophaga spp. and Leptotrichia buccalis) and have different geographical origins (Asia and Europe) -- against antimicrobials that are clinically relevant in dental therapy. Materials and Methods: A total of 45 strains were tested (29 Fusobacterium spp., 13 Capnocytophaga spp. and 3 L. buccalis) that were either isolated from Chinese patients or were obtained from different strain collections. Their antimicrobial susceptibility to the antimicrobial agents benzylpenicillin, amoxicillin, amoxicillin-clavulanic acid, ciprofloxacin, moxifloxacin, clindamycin, doxycycline, tetracycline and metronidazole was tested using the E-Test. Strains with particular resistance to penicillin, clindamycin and metronidazole were further analysed for resistance genes. Results: All tested bacterial isolates were sensitive to amoxicillin, amoxicillin-clavulanic acid, doxycycline and tetracycline, but showed variable sensitivity towards other antibiotics such as benzylpenicillin, ciprofloxacin, moxifloxacin, clindamycin and metronidazole. Conclusion: The results of the present study suggest that certain periodontal disease-related bacterial strains can be resistant towards antimicrobial agents commonly used in adjuvant periodontal therapy. [ABSTRACT FROM AUTHOR]

Purpose: This study investigated the effect of toothbrush bristle stiffness and brushing force on the cleaning efficacy in vitro. Materials and Methods: Eighty bovine dentin samples were allocated to eight groups (n=10). Two custom-made toothbrushes of different bristle stiffness (soft and medium) were tested at four different brushing forces (1, 2, 3 and 4 N). Dentin samples were stained in black tea and brushed (60 strokes/min) for a total of 25 min in a brushing machine with an abrasive solution (RDA 67). Photographs were taken after 2 and 25 min of brushing time. Cleaning efficacy was measured planimetrically. Results: After 2 min of brushing, the soft-bristle toothbrush did not cause statistically significantly different cleaning efficacy at different brushing forces, while the medium-bristle toothbrush cleaned statistically significantly less efficaceously only at 1 N. Comparing the two different toothbrushes, higher cleaning efficacy was observed only at 1 N for the soft-bristle brush. At 25 min brushing time, the soft-bristle cleaned statistically significantly better at 4 N compared to 1 N and 2 N and at 3 N compared to 1 N. Using the medium-bristle, cleaning efficacy increased with increasing brushing force. After 25 min of brushing, no statistically significant difference was observed between the two different toothbrushes. Conclusion: Irrespective the brushing force, the use of a soft or medium toothbrush results in comparable cleaning efficacy. At 2 min brushing time, increasing the brushing force does not increase the cleaning efficacy. [ABSTRACT FROM AUTHOR]

Purpose: To investigate the absolute wear caused by toothpastes with highly discrepant REA (Relative Enamel Abrasivity) and RDA (Relative Dentin Abrasivity) values on both enamel and dentin: Candida Peppermint (CP; REA: 1; RDA: 42), Colgate Total Original (CTO; REA: 4; RDA: 100), Signal White System (SWS; REA: 8; RDA: 143), and Candida White Diamond (CWD; REA 244; RDA: 12). Materials and Methods: Eighty (80) bovine enamel samples and 80 dentin samples were divided into four groups each (n = 20) and investigated after a 6-h brushing procedure (21,600 cycles, 60 cycles/min, load of 2.5 N) with the four toothpastes. The abrasive enamel and dentin wear were registered using a contact profilometer. The median and interquartile range (IQR) of the abrasive enamel and dentin wear were calculated for each group. Pairwise comparisons were conducted using the Wilcoxon signed-rank exact test, and the p-value was adjusted according to Holm (statistical significance set at 0.05). Results: CWD led to the highest abrasive enamel wear (9.86 μm [5.77]). CTO caused the highest abrasive dentin wear (166.70 μm [69.90]), being statistically significantly higher than the wear for CP (54.20 μm [24.00]) and CWD (17.00 μm [7.80]) (p = 0.00001). The abrasive dentin wear for CWD was statistically significantly lower in comparison to all other groups (p = 0.00001). Conclusion: Toothpastes with highly discrepant REA and RDA values presented statistically significantly different absolute wear on enamel and dentin. REA and RDA values should both be declared for every toothpaste. [ABSTRACT FROM AUTHOR]

Purpose: To investigate the effect of the supplementation of energy drinks with green tea extract on abrasive and erosive dentin wear. Materials and Methods: Six groups, each comprising 15 bovine dentin samples, were prepared, yielding a total of 90 samples. Erosion was performed by immersing the samples in Red Bull and Red Bull light with and without green tea extract. Tap water with and without green tea extract was used as the control groups. The samples were subjected to abrasive/erosive cycling for five days. The following cycling was performed daily: toothbrush abrasion (20 brushstrokes; 2.5 N); eight erosive cycles (2 min storage in the respective solutions); in between the erosive cycles, storage in artificial saliva (60 min) and again toothbrush abrasion (20 brushstrokes; 2.5 N). During the night, samples were again stored in artificial saliva. Abrasive/erosive dentin wear was measured using a stylus profilometer (μm, accuracy = 40 nm). The measured dentin loss results from the vertical position shift on the y-axis from base to final profile after the wear process in 2D. Pairwise comparisons between the groups were carried out using Wilcoxon signed-rank test. Results: The following dentin wear (median [IQR]) was measured: Red Bull: 1.9 μm (0.5); Red Bull Light: 1.3 μm (0.3); Red Bull with green tea extract: 0.8 μm (0.3); Red Bull Light with green tea extract: 0.3 μm (0.5); Tap water with green tea extract: -0.2 μm (0.7); Tap water: -1.0 μm (1.2). The comparison of all tested groups to each other proved to be statistically significant (p < 0.05). Conclusion: The supplementation of energy drinks with green tea extract provide a protective effect against erosive/ abrasive wear in vitro. [ABSTRACT FROM AUTHOR]