Search

PurposeTo investigate the role of qualitative and quantitative DCE-MRI parameters in prostate cancer (PCa) stratified by whole-mount histopathology (WMHP) Gleason score (GS) and PI-RADSv2.MethodsThis retrospective study included 323 PCa tumors in 254 men, who underwent 3T MRI prior to prostatectomy, 7/2009-12/2016. Qualitative DCE curve types included type 1 (progressive), type 2 (plateau) and type 3 (washout). Quantitative DCE-MRI pharmacokinetic (PK) parameters included Ktrans (influx volume transfer coefficient), Kep (efflux reflux rate constant) and iAUC (initial area under the curve). DCE-MRI features of true positive lesions were evaluated for overall, index, transition zone (TZ) and peripheral zone (PZ), based on GS grade (low = 6, high > 6) and PI-RADSv2 score using SPSSv24.ResultsThere were 57 (17.6%) low-grade and 266 (82.4%) high-grade PCa lesions. PI-RADSv2 3, 4 and 5 included 106, 120 and 97 lesions, respectively. 251 (77.7%) and 72 (22.3%) lesions were located in PZ and TZ, respectively. High-grade lesions had significantly higher proportion of Type 3 curves compared to low-grade lesions in overall (70.3% vs. 54.4%) and TZ (73.5% vs. 43.5%). As PI-RADSv2 increased, the proportion of type 3 curve significantly increased for overall (80.4-51.9%), index (80.4-54.7%) and PZ (78.7-52.1%) lesions. Among PK parameters, Ktrans (0.43 vs 0.32) and iAUC (8.99 vs 6.9) for overall PCa, Ktrans (0.43 vs 0.31) and iAUC (9 vs 6.67) for PZ PCa, and iAUC (8.94 vs 7.42) for index PCa were significantly higher for high-grade versus low-grade lesions. Also, Ktrans (0.51-0.34), Kep (1.75-1.29) and iAUC (9.79-7.6) for overall PCa, Ktrans (0.53-0.32), Kep (1.81-1.26) and iAUC (9.83-7.34) for PZ PCa; and Kep (1.79-1.17) and iAUC (11.3-8.45) for index PCa increased significantly with a higher PI-RADSv2 score.ConclusionsThe results of study show the possible utility of qualitative and quantitative DCE-MRI parameters for assessment of PCa GS and PI-RADSv2 categorization.

ObjectiveThis investigation was performed to evaluate the registration accuracy between magnetic resonance imaging (MRI) and pathology using three-dimensional (3-D) printed molds.MethodsTissue-mimicking prostate phantoms were manufactured with embedded fiducials. The fiducials were used to measure and compare target registration error (TRE) between phantoms that were sliced by hand versus phantoms that were sliced within 3-D-printed molds. Subsequently, ten radical prostatectomy specimens were placed inside molds, scanned with MRI, and then sliced. The ex vivo scan was used to assess the true location of whole mount (WM) slides relative to in vivo MRI. The TRE between WM and in vivo MRI was measured using anatomic landmarks.ResultsManually sliced phantoms had a 4.1-mm mean TRE, whereas mold-sliced phantoms had a 1.9-mm mean TRE. Similarly, mold-assisted slicing reduced mean angular misalignment around the left-right (LR) anatomic axis from 10.7° to 4.5°. However, ex vivo MRI revealed that excised prostates were misaligned within molds, including a mean 14° rotation about the LR axis. The mean in-plane TRE was 3.3 mm using molds alone and 2.2 mm after registration was corrected with ex vivo MRI.ConclusionPatient-specific molds improved accuracy relative to manual slicing techniques in a phantom model. However, the registration accuracy of surgically resected specimens was limited by their imperfect fit within molds. This limitation can be overcome with the addition of ex vivo imaging.SignificanceThe accuracy of 3-D-printed molds was characterized, quantifying their utility for facilitating MRI-pathology registration.

Purpose To determine the diagnostic yield of in-bore 3-T magnetic resonance (MR) imaging-guided prostate biopsy and stratify performance according to Prostate Imaging Reporting and Data System (PI-RADS) versions 1 and 2. Materials and Methods This study was HIPAA compliant and institution review board approved. In-bore 3-T MR-guided prostate biopsy was performed in 134 targets in 106 men who (a) had not previously undergone prostate biopsy, (b) had prior negative biopsy findings with increased prostate-specific antigen (PSA) level, or (c) had a prior history of prostate cancer with increasing PSA level. Clinical, diagnostic 3-T MR imaging was performed with in-bore guided prostate biopsy, and pathology data were collected. The diagnostic yields of MR-guided biopsy per patient and target were analyzed, and differences between biopsy targets with negative and positive findings were determined. Results of logistic regression and areas under the curve were compared between PI-RADS versions 1 and 2. Results Prostate cancer was detected in 63 of 106 patients (59.4%) and in 72 of 134 targets (53.7%) with 3-T MR imaging. Forty-nine of 72 targets (68.0%) had clinically significant cancer (Gleason score ≥ 7). One complication occurred (urosepsis, 0.9%). Patients who had positive target findings had lower apparent diffusion coefficient values (875 × 10-6 mm2/sec vs 1111 × 10-6 mm2/sec, respectively; P < .01), smaller prostate volume (47.2 cm3 vs 75.4 cm3, respectively; P < .01), higher PSA density (0.16 vs 0.10, respectively; P < .01), and higher proportion of PI-RADS version 2 category 3-5 scores when compared with patients with negative target findings. MR targets with PI-RADS version 2 category 2, 3, 4, and 5 scores had a positive diagnostic yield of three of 23 (13.0%), six of 31 (19.4%), 39 of 50 (78.0%), and 24 of 29 (82.8%) targets, respectively. No differences were detected in areas under the curve for PI-RADS version 2 versus 1. Conclusion In-bore 3-T MR-guided biopsy is safe and effective for prostate cancer diagnosis when stratified according to PI-RADS versions 1 and 2. ©RSNA, 2016.

123I thyroid scintigraphy can be performed with either a low energy or medium energy collimator. The high-energy photon emissions from 123I cause septal penetration with scattered photons, which deteriorate image quality. The aim of this study is to evaluate the impact of collimator choice on 123I thyroid scintigraphy in clinical practice. Methods: Forty seven patients who received thyroid planar scintigraphy with both a low energy high resolution (LEHR) collimator and a medium energy (ME) collimator were prospectively recruited using the same imaging protocol. Image quality, collimator sensitivity, and estimation of thyroid size were assessed between LEHR and ME collimators, and were compared with thyroid ultrasonography as the gold standard. Results: Images acquired with the ME collimator demonstrate less scattered background noise, improved thyroid to background contrast, and increased sensitivity in the thyroid gland compared to images acquired by the LEHR collimator. Manual measurement of the thyroid length is more accurate by using the ME collimator. Automatic estimation of the thyroid area size by using the same thyroid cutoff threshold is larger in ME collimator images than in LEHR collimator images. Conclusion:123I thyroid scintigraphy using the ME collimator generates cleaner images with less background noise and has higher collimator sensitivity for thyroid imaging compared to the LEHR collimator. Different thyroid cutoff threshold should be used to estimate the thyroid area size and volume between low and medium energy collimators. [ABSTRACT FROM AUTHOR]

Background: Patient-specific 3D-printed molds and ex vivo MRI of the resected prostate have been two important strategies to align MRI with whole-mount histopathology (WMHP) for prostate cancer (PCa) research, but the combination of these two strategies has not been systematically evaluated.Purpose: To develop and evaluate a system that combines patient-specific 3D-printed molds with ex vivo MRI (ExV) to spatially align in vivo MRI (InV), ExV, and WMHP in PCa patients.Study Type: Prospective cohort study.Population: Seventeen PCa patients who underwent 3T MRI and robotic-assisted laparoscopic radical prostatectomy (RALP).Field Strength/sequences: T2 -weighted turbo spin-echo sequences at 3T.Assessment: Immediately after RALP, the fresh whole prostate specimens were imaged in patient-specific 3D-printed molds by 3T MRI and then sectioned to create WMHP slides. The time required for ExV was measured to assess impact on workflow. InV, ExV, and WMHP images were registered. Spatial alignment was evaluated using: slide offset (mm) between ExV slice locations and WMHP slides; overlap of the 3D prostate contour on InV versus ExV using Dice's coefficient (0 to 1); and 2D target registration error (TRE, mm) between corresponding landmarks on InV, ExV, and WMHP. Data are reported as mean ± standard deviation (SD).Statistical Testing: Differences in 2D TRE before versus after registration were compared using the Wilcoxon signed-rank test (P < 0.05 considered significant).Results: ExV (duration 115 ± 15 min) was successfully incorporated into the workflow for all cases. Absolute slide offset was 1.58 ± 1.57 mm. Dice's coefficient was 0.865 ± 0.035. 2D TRE was significantly reduced after registration (P < 0.01) with mean (±SD of per patient means) of 1.9 ± 0.6 mm for InV versus ExV, 1.4 ± 0.5 mm for WMHP versus ExV, and 2.0 ± 0.5 mm for WMHP versus InV.Data Conclusion: The proposed system combines patient-specific 3D-printed molds with ExV to achieve spatial alignment between InV, ExV, and WMHP with mean 2D TRE of 1-2 mm.Level Of Evidence: 2 Technical Efficacy: Stage 1 J. Magn. Reson. Imaging 2019;49:270-279. [ABSTRACT FROM AUTHOR]

CE credit: For CE credit, you can access the test for this article, as well as additional JNMT CE tests, online at https://www.snmmilearningcenter.org Complete the test online no later than March 2025. Your online test will be scored immediately. You may make 3 attempts to pass the test and must answer 75% of the questions correctly to receive Continuing Education Hour (CEH) credit. Credit amounts can be found in the SNMMI Learning Center Activity. SNMMI members will have their CEH credit added to their VOICE transcript automatically; nonmembers will be able to print out a CE certificate upon successfully completing the test. The online test is free to SNMMI members; nonmembers must pay $15.00 by credit card when logging onto the website to take the test. 123 I thyroid scintigraphy can be performed with either a low-energy or a medium-energy (ME) collimator. The high-energy photon emissions from 123 I cause septal penetration with scattered photons, which deteriorate image quality. The aim of this study was to evaluate the impact of collimator choice on 123 I thyroid scintigraphy in clinical practice. Methods: Forty-seven patients who underwent thyroid planar scintigraphy with both a low-energy, high-resolution (LEHR) collimator and a ME collimator were prospectively recruited using the same imaging protocol. Image quality, collimator sensitivity, and estimation of thyroid size were assessed between LEHR and ME collimators and were compared with thyroid ultrasonography as the gold standard. Results: Images acquired with the ME collimator demonstrated reduced scattered background noise, improved thyroid-to-background contrast, and increased sensitivity in the thyroid gland compared with images acquired by the LEHR collimator. Manual measurement of the thyroid length is more accurate using the ME collimator. Automatic estimation of the thyroid area using the same thyroid threshold is larger in ME collimator images than in LEHR collimator images. Conclusion: Compared with the LEHR collimator, the ME collimator generates cleaner 123 I thyroid scintigraphy images with less background noise and has higher collimator sensitivity for thyroid imaging. Different thyroid thresholds should be used to estimate the thyroid area and volume between low and ME collimators., (© 2022 by the Society of Nuclear Medicine and Molecular Imaging.)

OBJECTIVE. The objective of our study was to determine the performance of 3-T multiparametric MRI (mpMRI) for prostate cancer (PCa) detection and localization, stratified by anatomic zone and level, using Prostate Imaging Reporting and Data System version 2 (PI-RADSv2) and whole-mount histopathology (WMHP) as reference. MATERIALS AND METHODS. Multiparametric MRI examinations of 415 consecutive men were compared with thin-section WMHP results. A genitourinary radiologist and pathologist collectively determined concordance. Two radiologists assigned PI-RADSv2 scores and sector location to all detected foci by consensus. Tumor detection rates were calculated for clinical and pathologic (tumor location and zone) variables. Both rigid and adjusted sector-matching models were used to account for fixation-related issues. RESULTS. Of 863 PCa foci in 16,185 prostate sectors, the detection of overall and index PCa lesions in the midgland, base, and apex was 54.9% and 83.1%, 42.1% and 64.0% ( p = 0.04, p = 0.02), and 41.9% and 71.4% ( p = 0.001, p = 0.006), respectively. Tumor localization sensitivity was highest in the midgland compared with the base and apex using an adjusted match compared with a rigid match (index lesions, 71.3% vs 43.7%; all lesions, 70.8% vs 36.0%) and was greater in the peripheral zone (PZ) than in the transition zone. Three-Tesla mpMRI had similarly high specificity (range, 93.8-98.3%) for overall and index tumor localization when using both rigid and adjusted sector-matching approaches. CONCLUSION. For 3-T mpMRI, the highest sensitivity (83.1%) for detection of index PCa lesions was in the midgland, with 98.3% specificity. Multiparametric MRI performance for sectoral localization of PCa within the prostate was moderate and was best for index lesions in the PZ using an adjusted model.

OBJECTIVE. The purpose of this study is to determine the overall and sector-based performance of 3-T multiparametric MRI for prostate cancer (PCa) detection and localization by using Prostate Imaging-Reporting and Data System version 2 (PI-RADSv2) scoring and segmentation compared with whole-mount histopathologic analysis. MATERIALS AND METHODS. Multiparametric 3-T MRI examinations of 415 consecutive men were compared with thin-section whole-mount histopathologic analysis. A genitourinary radiologist and pathologist collectively determined concordance. Two radiologists assigned PI-RADSv2 categories and sectoral location to all detected foci by consensus. Tumor detection rates were calculated for clinical and pathologic (Gleason score) variables. Both rigid and adjusted sector-matching models were used to account for fixation-related issues. RESULTS. The 415 patients had 863 PCa foci (52.7% had a Gleason score ≥ 7, 61.9% were ≥ 1 cm, and 90.4% (375/415) of index lesions were ≥ 1 cm) and 16,185 prostate sectors. Multiparametric MRI enabled greater detection of PCa lesions 1 cm or larger (all lesions vs index lesions, 61.6% vs 81.6%), lesions with Gleason score greater than or equal to 7 (all lesions vs index lesions, 71.4% vs 80.9%), and index lesions with both Gleason score greater than or equal to 7 and size 1 cm or larger (83.3%). Higher sensitivity was obtained for adjusted versus rigid tumor localization for all lesions (56.0% vs 28.5%), index lesions (55.4% vs 34.3%), lesions with Gleason score greater than or equal to 7 (55.7% vs 36.0%), and index lesions 1 cm or larger (56.1% vs 35.0%). Multiparametric 3-T MRI had similarly high specificity (96.0-97.9%) for overall and index tumor localization with adjusted and rigid sector-matching approaches. CONCLUSION. Using 3-T multiparametric MRI and PI-RADSv2, we achieved the highest sensitivity (83.3%) for the detection of lesions 1 cm or larger with Gleason score greater than or equal to 7. Sectoral localization of PCa within the prostate was moderate and was better with an adjusted model than with a rigid model.

Objective: The purpose of this study was to evaluate the effectiveness of retroperitoneal organ displacement for image-guided percutaneous biopsy., Conclusion: Organ displacement using 0.9% saline or 5% dextrose in water (D5W) can create safe access routes for targeted abdominal and pelvic biopsies.