Search

Abstract Several studies have reported estimating the femoral head center (FC) from reference points on the pelvis; however, none have reported estimates obtained from those on the femur. In this cross-sectional study, we investigated the estimated point of FC from the coordinate value of the tip of the greater trochanter (GT) and lesser trochanter (LT) using a formula with a three-dimensional measurement technique. We used data from 92 healthy Japanese subjects without any back or knee symptoms and no abnormalities in the hip, knee, or spine on plain radiographs. In our study, the difference in the anteroposterior direction was larger than that in the other directions. We speculate that the accuracy of defining the tip of the LT is difficult in the anteroposterior direction. Moreover, the correlation coefficients were larger for women. The reason for this was unclear because the variation in the proximal femur may be similar in women. We found that the average difference between the actual and calculated values was approximately 2 mm. We considered that the coordinate value of the FC from the tip of the GT could be estimated more accurately using the regression equation compared to previous methods based on pelvic reference points.

Abstract Global femoral offset (GFO) and femoral offset (FO) reportedly affect outcomes following total hip arthroplasty (THA). However, FO assessed using plain radiography is affected by internal and external rotations of the hip joint. We investigated the relationship between leg length discrepancy and Harris hip score (HHS), and their influence on acetabular offset (AO), FO, GFO, anterior femoral offset, and outcomes after THA. We retrospectively evaluated 140 patients with hip osteoarthritis who underwent THA. A three-dimensional (3D) pelvis and femur model created from computed tomography (data using ZedHip software was used to investigate these parameters. The modified (m)HHS scores were significantly improved from 49.0 to 88.8 in total mHHS, 20.0–44.5 in pain, and 28.9–44.4 points in function. Significant correlations were found between the differences in AO, FO, GFO, and pain score in binominal, with maximum values of − 1.24, + 1.54, and + 0.90 mm/100 cm body height, respectively. The maximum value of GFO and mHHS in binominal was + 1.17 mm/100 cm body height (BH). The optimal range of difference of GFO was − 1.75 to 4.09 mm/100 cm BH. This is the first report using a 3D method for assessing FO. Preoperative planning using the system could improve postoperative function.

Background and Objectives: The incidence of osteoporotic hip fractures in Niigata Prefecture, Japan, has been studied approximately every 5 years since 1985. In 2020, as in previous surveys, a prefecture-wide survey was initiated as planned; however, the global outbreak of the coronavirus disease 2019 (COVID-19) began simultaneously. This study aimed to compare the results of the 2015 and 2020 Niigata Prefecture Fragility Hip Fracture Surveys to determine whether the COVID-19 pandemic affected the occurrence and treatment of proximal femoral fractures throughout Niigata Prefecture. Materials and Methods: In this study, data from the 2015 and 2020 Niigata Prefecture Fragility Hip Fracture Surveys were used. Data were obtained from registration forms returned by hospitals and clinics in Niigata Prefecture for patients living therein who were diagnosed with osteoporotic hip fractures over a 1-year period in 2015 and 2020. Results: In Niigata Prefecture, the total annual number of fractures increased from 3181 in 2015 to 3369 in 2020, whereas the age-adjusted fracture rate decreased. Regarding the location of the fractures, the proportion of outdoor fractures was lower than that of indoor fractures. The proportion of outdoor fractures decreased over the year as a whole, but in particular, the proportion of outdoor fractures decreased significantly under the issued emergency declarations. The most common reasons for delayed surgery related to COVID-19 were “waiting for PCR results” and “quarantine for fever,” accounting for approximately 1.9% of all causes. Conclusions: In Niigata Prefecture, Japan, the effect of the COVID-19 pandemic on the number and rate of fractures was minuscule. The proportion of indoor fractures to outdoor fractures increased during the emergency declaration period. Considering that the number of fragility fractures remains the same during an infectious disease pandemic such as COVID-19, it is necessary to ensure that healthcare resources are available to deal with them.

Background and Objectives: In the field of orthopedic surgery, novel techniques of three-dimensional shape modeling using two-dimensional tomographic images are used for bone-shape measurements, preoperative planning in joint-replacement surgery, and postoperative evaluation. ZedView® (three-dimensional measurement instrument and preoperative-planning software) had previously been developed. Our group is also using ZedView® for preoperative planning and postoperative evaluation for more accurate implant placement and osteotomy. This study aimed to evaluate the measurement error in this software in comparison to a three-dimensional measuring instrument (3DMI) using human bones. Materials and Methods: The study was conducted using three bones from cadavers: the pelvic bone, femur, and tibia. Three markers were attached to each bone. Study 1: The bones with markers were fixed on the 3DMI. For each bone, the coordinates of the center point of the markers were measured, and the distances and angles between these three points were calculated and defined as “true values.” Study 2: The posterior surface of the femur was placed face down on the 3DMI, and the distances from the table to the center of each marker were measured and defined as “true values.” In each study, the same bone was imaged using computed tomography, measured with this software, and the measurement error from the corresponding “true values” was calculated. Results: Study 1: The mean diameter of the same marker using the 3DMI was 23.951 ± 0.055 mm. Comparisons between measurements using the 3DMI and this software revealed that the mean error in length was Conclusion: This surgical planning software could measure the distance and angle between the centers of the markers with high accuracy; therefore, this is very useful for pre- and postoperative evaluation.

Abstract Background It was previously reported that pelvises with developmental dysplasia of the hip are tilted anteriorly, which increases bony coverage of the femoral head. This study aimed to investigate the correlation between anatomical parameters of the pelvis such as pelvic incidence and anatomical pelvic tilt and functional parameters of the spine and pelvis such as tilt of the anterior pelvic plane. Methods We examined 84 female patients with bilateral developmental dysplasia of the hip who had undergone curved periacetabular osteotomy at author’s institution. Radiographs of the thoracic to lumbar spines and the pelvis were obtained in the standing position to measure spino-pelvic parameters before surgery. Morphological parameters of the acetabulum such as the anterior center-edge (CE) angle, posterior CE angle, lateral CE angle, and acetabular anteversion were measured using a preoperative three-dimensional pelvic model reconstructed from computed tomography images. Pearson’s correlation analysis was conducted to evaluate the relationship of these parameters. Results With regard to correlations between pelvic incidence (PI) and other parameters, the sacral slope (SS) value (r = 0.666) was the highest among functional parameters and the anatomical-SS value (r = 0.789) was the highest among morphological parameters. There were moderate correlations of the anterior pelvic plane angle (APPA) with pelvic tilt (PT) (r = − 0.594) and anatomical-PT (r = 0.646). With regard to correlations between spino-pelvic parameters and bony morphological parameters of the acetabulum, there was a moderate correlation between anatomical-PT and acetabular anteversion (AA) (r = 0.424). There were moderate correlations of APPA with the anterior CE angle (r = − 0.478), posterior CE angle (r = 0.432), and AA (r = 0.565). APPA had a stronger correlation with anatomical-PT (r = 0.646) than with AA. Conclusions The tilt of the pelvis may be more dependent on anatomical-PT, a morphological parameter of the pelvis, than the lateral CE angle, anterior CE angle, posterior CE angle, and acetabular anteversion on bony coverage of the acetabulum. This study is the first to investigate the correlation between functional parameters of the pelvis and spine and morphological parameters of the pelvis and acetabulum besides PI.

Abstract Background Sagittal spinal balance and standing posture are affected by pelvic morphology, especially pelvic incidence (PI). However, it is not difficult to identify the hip center because of overlap of the pelvis, image contrast, and soft tissue artifacts. Measurements of PI are not always suitable in all patients, especially those with osteoarthritis of the hip joint whose femoral head is nonspherical, subluxed, or dislocated. We measured PI, pelvic tilt (PT), and sacral slope (SS) as anatomical parameters using a novel three-dimensional measurement in order to compare the pelvic morphology between normal, healthy men and women. Methods In this cross-sectional study, we evaluated 108 Japanese subjects (55 men, 53 women) without low back or knee pain. We used the three-dimensional pelvis model adjusted to the anterior pelvic plane and measured the pelvic parameters. The subjects were stratified by age ( 0.87. Conclusions We found a strong correlation between PI and anatomical-SS in men and women. This novel measurement concept may be useful to estimate PI from anatomical-SS because the measurements of PI are not always suitable in all patients, especially those with osteoarthritis of the hip joint whose femoral head is not spherical or whose femoral head is subluxed or dislocated. This is the first report to describe the relationship between PI, anatomical-PT, and anatomical-SS as morphologic parameters with a high interclass correlation coefficient for intraobserver and interobserver reliabilities.

Purpose: Anatomical sacral slope (a-SS), a pelvic anatomical parameter that does not require the center of the femoral head, strongly correlates with pelvic incidence (PI) during three-dimensional measurements in normal subjects. Sagittal alignment of spinal and pelvic parameters is typically evaluated using two-dimensional radiographs; however, the relationship between a-SS and PI has not been evaluated using radiographs. This study aimed to evaluate the correlation between a-SS and other spinal and pelvic parameters using radiographs. Methods: We evaluated 144 healthy women. Using sagittal radiographs, we measured lumbar lordosis (LL), thoracic kyphosis, PI, SS, pelvic tilt, and a-SS, which were defined as the angle between the superior end plate of S1 and a line perpendicular to the anterior pelvic plane. Pearson coefficients were used to determine correlations, and intraobserver and interobserver intraclass correlation coefficients (ICCs) were used for validation. Results: There was a strong correlation between PI and a-SS ( r = 0.756). Moreover, correlations between a-SS and LL and between PI and LL were similar ( r = 0.661 and r = 0.554, respectively). The intraobserver ICCs were 0.884 for a-SS and 0.840 for PI. The interobserver ICCs were 0.856 for a-SS and 0.653 for PI. Conclusion: a-SS was strongly correlated with PI. The correlation between a-SS and LL was equivalent to the correlation between PI and LL. Moreover, the ICC for a-SS was larger than that of PI. This study suggests that a-SS is a useful new pelvic anatomical parameter that can be used instead of PI.