Search

Soil management is known to have significant effects on soil structure. Especially, grassland renovation and associated ploughing may have destructive influence on structure, but on the other hand conversion of arable land to grassland can improve pore structure and soil functions. In crop rotations including perennial grasses, soil structure is affected by these counteracting processes. The purpose of this work was to study and quantify the impacts of varying soil management practices on the structure of boreal arable heavy clay soils. We studied intact topsoil samples collected from two sites by X-ray computed microtomography, image analysis, image-based pore-scale flow simulations, and water retention measurements. At both sites, one area under long-term (at least 30-year-old) grassland was compared with adjacent field area with contrasting managements:Site 1: Cereal production under no-till management for 13 years prior to sampling. Site 2: Crop rotation of a livestock farm with cereals and perennial grasses, tillage by ploughing. At the sampling time this field area had been two years under grass after preceding 3-year cereal period. Both imaging and water retention showed statistically and practically significant differences in the soil macropore structure at site 1 such that porosity of the long-term grassland was clearly higher that that under cereal production. On the contrary, at site 2, only minor differences between managements were observed. Our results show that the soil management practices affect the macropore structure of boreal arable clay soil and that no-till and crop-rotation managements had clearly different effects on soil structure as compared to long-term grasslands.

Cellulose fiber materials suitable for filtering, insulation, protective, and hygiene applications can be formed using aqueous foam as a carrier phase. The subtle fiber–bubble interaction provides a tool which can be utilized to alter both structural and mechanical material properties. Earlier model surface studies have only indicated clear surface-bubble adhesion when both the surface hydrophobicity and surface tension of the solution are high enough. In this work, we first show that for silica model surfaces these basic mechanisms are similar for both nonionic polyethylene glycol sorbitan monolaurate (Tween 20) and anionic sodium dodecyl sulfate (SDS) surfactants. In the second step, thick nonwoven materials were foam formed from hydrophilic or hydrophobic viscose fibers using small amounts of cellulose microfibers (CMFs) to form a bonding agent. There was a clear variation in structure and strength properties between the samples made using different fibers and surfactants. The partial alignment and layering of fibers in the wet foam led to anisotropy in the mechanical properties of the formed samples. Using SDS, the fiber alignment was very strong for hydrophilic fibers but was reduced for hydrophobic fibers because of stronger coupling to bubbles during structure forming, impacting the microscale fiber network. For nonionic Tween 20, in addition to surfactant adsorption on the fibers, the ethoxylated surfactant headgroups are suggested to form bridges between CMFs and other fibers, restricting fiber movements during formation. For hydrophilic fibers, this showed up as a lower in-plane compression modulus but higher transverse strength for Tween 20 compared with SDS surfactant. For hydrophobic fibers, the sensitivity of the mechanical properties on surfactant type was even stronger.

1.AbstractPolarized light-based navigation in insects is facilitated by a specialised polarisation-sensitive part of the eye known as the dorsal rim area (DRA). Existing methods to study the anatomy of the DRA are in most cases destructive and very time consuming. Here, we present a novel method that allows for DRA localization using 3D volumetric images acquired through micro-computed tomography in combination with 2D photographs. We used the method on size polymorphic buff-tailed bumblebees, Bombus terrestris. We found that the size of the DRA can be easily acquired from photographs of the dorsal part of the eye. An allometric analysis of the size of the DRA in relation to body size in B. terrestris showed that the DRA region increases with body size but not at the same rate. Using our method, we localised the DRA in a 3D volume rendering of the eye using 2D photos localization of an individual’s DRA onto the volumetric image stack of the head allowed for individual-level descriptions of the ommatidial structures (lens, crystalline cones, rhabdoms) to be performed on three different eye regions (DRA, non-DRA, proximate to DRA). The only feature distinctly unique to the DRA ommatidia was the smaller dimension of crystalline cones in comparison to other regions. Using our novel methodology we provide the first individual-level description of DRA ommatidial features and a comparison of how the DRA area varies with body size in bumblebees.

A non-invasive method based on X-ray imaging for measuring deformation and water transport in wetting and swelling bentonite samples is introduced. Sequential X-ray images taken of the samples were used to calculate the attenuation coefficient and deformation. These results, together with careful calibration, allowed finding the dry density and water content distributions and their temporal evolution in the wetting and swelling samples. A specific correction technique, based on regularly taking reference X-ray images of aluminum plates of varying thickness, was developed and used to take into account X-ray beam instabilities and thus to improve the accuracy of density analysis. Large deformation, present in the experiments, was measured with an improved version of a block-matching algorithm. The X-ray imaging method was used here to measure the axial swelling of compacted MX-80 bentonite samples in a tube when in contact with saline solution (0.1 M NaCl). This setup mimics a scenario where bentonite, planned to be used as a buffer material in a nuclear waste repository placed deep in the bedrock, swells into a rock fracture filled by groundwater. The method yielded potentially valuable data on hydro-mechanical behavior of bentonite, which may be used in developing and validating material models to be used in safety assessment of nuclear waste repository concepts. peerReviewed

In solitary insect pollinators such as butterflies, sensory systems must be adapted for multiple tasks, including nectar foraging, mate-finding, and locating host-plants. As a result, the energetic investments between sensory organs can vary at the intraspecific level and even among sexes. To date, little is known about how these investments are distributed between sensory systems and how it varies among individuals of different sex. We performed a comprehensive allometric study on males and females of the butterfly Pieris napi where we measured the sizes and other parameters of sensory traits including eyes, antennae, proboscis, and wings. Our findings show that among all the sensory traits measured, only antenna and wing size have an allometric relationship with body size and that the energetic investment in different sensory systems varies between males and females. Moreover, males had absolutely larger antennae and eyes, indicating that they invest more energy in these organs than females of the same body size. Overall, the findings of this study reveal that the size of sensory traits in P. napi are not necessarily related to body size and raises questions about other factors that drive sensory trait investment in this species and in other insect pollinators in general.

The formation of new blood vessels and the establishment of vascular networks are crucial during brain development, in the adult healthy brain, as well as in various diseases of the central nervous system. Here, we describe a step-by-step protocol for our recently developed method that enables hierarchical imaging and computational analysis of vascular networks in postnatal and adult mouse brains. The different stages of the procedure include resin-based vascular corrosion casting, scanning electron microscopy, synchrotron radiation and desktop microcomputed tomography imaging, and computational network analysis. Combining these methods enables detailed visualization and quantification of the 3D brain vasculature. Network features such as vascular volume fraction, branch point density, vessel diameter, length, tortuosity and directionality as well as extravascular distance can be obtained at any developmental stage from the early postnatal to the adult brain. This approach can be used to provide a detailed morphological atlas of the entire mouse brain vasculature at both the postnatal and the adult stage of development. Our protocol allows the characterization of brain vascular networks separately for capillaries and noncapillaries. The entire protocol, from mouse perfusion to vessel network analysis, takes ~10 d. This protocol uses vascular corrosion casting, hierarchical synchrotron radiation microcomputed tomography imaging and computational image analysis to assess the 3D vascular network architecture in the entire postnatal and adult mouse brain.

The visual systems of pollinating insects are studied to understand the effects of a changing environment, and are to date imaged using microscopy or micro-CT. Microscopy only allows two-dimensional imaging and conventional micro-CT requires heavy-metal staining of the samples. Here we present virtual histology of compound eyes of bumblebee (Bombus terrestris) using a laboratory nano-CT system. Propagation-based phase-contrast CT allows three-dimensional imaging of samples without using any staining. Micrometre-resolution images of the microanatomy of the eyes were reconstructed, and the features identified in CT (cornea, crystalline cones, pigment, photoreceptor cells, basement membrane) were confirmed with electron microscopy.

Broader use of bio-based fibres in packaging becomes possible when the mechanical properties of fibre materials exceed those of conventional paperboard. Hot-pressing provides an efficient method to improve both the wet and dry strength of lignin-containing paper webs. Here we study varied pressing conditions for webs formed with thermomechanical pulp (TMP). The results are compared against similar data for a wide range of other fibre types. In addition to standard strength and structural measurements, we characterise the induced structural changes with X-ray microtomography and scanning electron microscopy. The wet strength generally increases monotonously up to a very high pressing temperature of 270 °C. The stronger bonding of wet fibres can be explained by the inter-diffusion of lignin macromolecules with an activation energy around 26 kJ mol−1 after lignin softening. The associated exponential acceleration of diffusion with temperature dominates over other factors such as process dynamics or final material density in setting wet strength. The optimum pressing temperature for dry strength is generally lower, around 200 °C, beyond which hemicellulose degradation begins. By varying the solids content prior to hot-pressing for the TMP sheets, the highest wet strength is achieved for the completely dry web, while no strong correlation was observed for the dry strength.

Purpose This study provides the first experimental application of multiscale three-dimensional (3D) X-ray Phase Contrast Imaging Computed Tomography (XPCI-CT) virtual histology for the inspection and quantitative assessment of the late stage effects of radio-induced lesions on lungs in a small animal model. Methods and Materials Healthy male Fischer rats were irradiated with X-ray standard broad beams and Microbeam Radiation Therapy (MRT), a high dose rate (14 kGy/s), FLASH spatially-fractionated X-ray therapy to avoid the beamlets smearing due to cardiosynchronous movements of the organs during the irradiation. After organ dissection, ex-vivo XPCI-CT was applied to all the samples and the results were quantitatively analysed and correlated to histologic data. Results XPCI-CT enables the 3D visualization of lung tissues with unprecedented contrast and sensitivity allowing alveoli, vessels and bronchi hierarchical visualization. XPCI-CT discriminates in 3D radio-induced lesions such as fibrotic scars, Ca/Fe deposits and, in addition, allows a full-organ accurate quantification of the fibrotic tissue within the irradiated organs. The radiation-induced fibrotic tissue content is less than 10% of the analyzed volume for all the MRT treated organs while it reaches the 34% in the case of irradiations with 50 Gy using a broad beam. Conclusions XPCI-CT is an effective imaging technique able to provide detailed 3D information for the assessment of lung pathology and treatment efficacy in a small animal model.

Nervous tissue metabolism is mainly supported by the dense thread of blood vessels which mainly provides fast supplies of oxygen and glucose. Recently, the supplying role of the brain vascular system has been examined in major neurological conditions such as the Alzheimer’s and Parkinson’s diseases. However, to date, fast and reliable methods for the fine level microstructural extraction of whole brain vascular systems are still unavailable. We present a methodological framework suitable for reconstruction of the whole mouse brain cerebral microvasculature by X-ray tomography with the unprecedented pixel size of 0.65 μm. Our measurements suggest that the resolving power of the technique is better than in many previous studies, and therefore it allows for a refinement of current measurements of blood vessel properties. Relevant insights emerged from analyses characterizing the regional morphology and topology of blood vessels. Specifically, vascular diameter and density appeared non-homogeneously distributed among the brain regions suggesting preferential sites for high-demanding metabolic requirements. Also, topological features such as the vessel branching points were non-uniformly distributed among the brain districts indicating that specific architectural schemes are required to serve the distinct functional specialization of the nervous tissue. In conclusion, here we propose a combination of experimental and computational method for efficient and fast investigations of the vascular system of entire organs with submicrometric precision.

In this article, we present an X-ray tomographic imaging method that is well suited for pulmonary disease studies in animal models to resolve the full pathway from gas intake to gas exchange. Current state-of-the-art synchrotron-based tomographic phase-contrast imaging methods allow for three-dimensional microscopic imaging data to be acquired non-destructively in scan times of the order of seconds with good soft tissue contrast. However, when studying multi-scale hierarchically structured objects, such as the mammalian lung, the overall sample size typically exceeds the field of view illuminated by the X-rays in a single scan and the necessity for achieving a high spatial resolution conflicts with the need to image the whole sample. Several image stitching and calibration techniques to achieve extended high-resolution fields of view have been reported, but those approaches tend to fail when imaging non-stable samples, thus precluding tomographic measurements of large biological samples, which are prone to degradation and motion during extended scan times. In this work, we demonstrate a full-volume three-dimensional reconstruction of an intact rat lung under immediate post-mortem conditions and at an isotropic voxel size of (2.75 µm)3. We present the methodology for collecting multiple local tomographies with 360° extended field of view scans followed by locally non-rigid volumetric stitching. Applied to the lung, it allows to resolve the entire pulmonary structure from the trachea down to the parenchyma in a single dataset., Histochemistry and Cell Biology, 155 (2), ISSN:0948-6143, ISSN:1432-119X

Imaging the visual systems of bumblebees and other pollinating insects may increase understanding of their dependence on specific habitats and how they will be affected by climate change. Current high-resolution imaging methods are either limited to two dimensions (light- and electron microscopy) or have limited access (synchrotron radiation x-ray tomography). For x-ray imaging, heavy metal stains are often used to increase contrast. Here, we present micron-resolution imaging of compound eyes of buff-tailed bumblebees (Bombus terrestris) using a table-top x-ray nanotomography (nano-CT) system. By propagation-based phase-contrast imaging, the use of stains was avoided and the microanatomy could more accurately be reconstructed than in samples stained with phosphotungstic acid or osmium tetroxide. The findings in the nano-CT images of the compound eye were confirmed by comparisons with light- and transmission electron microscopy of the same sample and finally, comparisons to synchrotron radiation tomography as well as to a commercial micro-CT system were done. peerReviewed

A 3D computational homogenization method based on X-ray microcomputed tomography (μCT) was proposed and implemented to investigate how the fiber weight fraction, orthotropy and orientation distribution affect the effective elastic properties of regenerated cellulose fiber-polylactic acid (PLA) biocomposites. Three-dimensional microstructures reconstructed by means of the X-ray μCT were used as the representative volume elements (RVEs) and incorporated into the finite element solver within the computational homogenization framework. The present method used Euclidean bipartite matching technique so as to eliminate the generation of artificial periodic boundaries and use the in-situ solution domains. In addition, a reconstruction algorithm enabled finding the volume and surface descriptions for each individual fiber in a semi-automatic manner, aiming at reducing the time and labor required for fiber labeling. A case study was presented, through which the method was compared and validated with the experimental investigations. The present study is thus believed to give a precise picture of microstructural heterogeneities for biocomposites of complex fiber networks and to provide an insight into the influences of the individual fibers and their networks on the effective elastic properties.

High strength 7XXX aluminium series reach exceptional strength, higher than all other industrial aluminium alloys. However, they suffer from a lack of ductility compared to softer series. This work presents a procedure to improve the ductility of 7475 Al alloy in high strength condition, reaching a true fracture strain of 70% at full 500 MPa T6 yield strength. Using friction stir processing (FSP) and post-FSP heat treatments, 100% of industrial rolled material T6 yield stress is maintained but a 180% increase in fracture strain is measured for the processed material. This ductility improvement is studied by in-situ synchrotron X-ray tomography and is explained by the reduction of intermetallic particles size and the homogenization of their spatial distribution. Furthermore, the microstructure after FSP shows equiaxed refined grains which favour crack deviation as opposed to large cracks parallel to the elongated coarse grains in rolled plate. These results are paving the way to better formability and crashworthiness of 7XXX alloys.

The formation of new blood vessels and the establishment of vascular networks are crucial during brain development, in the adult healthy brain, as well as in various diseases of the central nervous system. Here, we describe a step-by-step protocol for our recently developed method that enables hierarchical imaging and computational analysis of vascular networks in postnatal and adult mouse brains. The different stages of the procedure include resin-based vascular corrosion casting, scanning electron microscopy, synchrotron radiation and desktop microcomputed tomography imaging, and computational network analysis. Combining these methods enables detailed visualization and quantification of the 3D brain vasculature. Network features such as vascular volume fraction, branch point density, vessel diameter, length, tortuosity and directionality as well as extravascular distance can be obtained at any developmental stage from the early postnatal to the adult brain. This approach can be used to provide a detailed morphological atlas of the entire mouse brain vasculature at both the postnatal and the adult stage of development. Our protocol allows the characterization of brain vascular networks separately for capillaries and noncapillaries. The entire protocol, from mouse perfusion to vessel network analysis, takes ~10 d.

Fibre bonds play an essential role in various properties of paper. Much research has focused on their strength, but the determination of the actual contact area also provides a challenge. Many of the research methods rely on optical tools, which are restricted by the wavelength of light that is utilised. Novel X-ray computed tomography devices utilise X-rays in studying the inner structure of materials, and surpass the optical methods in terms of resolution, allowing detection of even smaller details and variations in distance between the fibres in the bond intersection area. X-ray nanotomography was used to image 26 individual cellulose fibre bonds made of springwood and summerwood fibres of refined bleached softwood kraft pulp. Various dimensional properties of the bonds were measured, most importantly the relative contact area (apparent contact area/intersection area), whose values showed wide variation from 6.4 to 85% with an average of 57.7%. Although the summerwood bonds had a somewhat smaller intersection and contact area than springwood bonds, there were no significant differences in the relative contact area between the bond types. This suggests that the effect of relative and absolute contact area on the strength differences between bond types seems to be minor.

Composites formed from wood fibers and man-made cellulosic fibers in PLA (polylactic acid) matrix, manufactured using sheet forming technique and hot pressing, are studied. The composites have very low density (due to high porosity) and rather good elastic modulus and tensile strength. As expected, these properties for the four types of wood fiber composites studied here improve with increasing weight fraction of fibers, even if porosity is also increasing. On the contrary, for man-made cellulosic fiber composites with circular fiber cross-section, the increasing fiber weight fraction (accompanied by increasing void content) has detrimental effect on stiffness and strength. The differences in behavior are discussed attributing them to fiber/ fiber interaction in wood fiber composites which does not happen in man-made fiber composites, and by rather weak fiber/matrix interface for man-made fibers leading to macro-crack formation in large porosity regions. peerReviewed

In this paper, a new simulation technique which can include microstructural inhomogeneity of particulate reinforced composites is proposed to accurately study deformation pattern and damage mechanism in these composites. Three dimensional microstructures constructed from XCT images incorporated into finite element modeling codes with minimal approximation to capture the effects of cluster size, local volume fraction of particles in the cluster and the distance between clusters as relevant statistical quantities describing the microstructural inhomogeneity of particulate reinforced composites. A quantitative parameter as degree of clustering is defined to consider particle clustering effect. The results indicate that the damage growth rate of composite with higher degree of clustering is significantly higher than those composites with lower degree of clustering. It is found that for region with higher degree of clustering and bigger size of clusters, the von Mises stress is higher at the same loading conditionand the growth rate of plastic flow is considerably higher than the other region with lower degree of clustering. Moreover, the dislocation description of deformation in two-phase materials rationalize particle clustering effect on the yield behavior of the particulate reinforced composites and the flow stress in these composites. The macroscopic stresses that lead to the initial yielding in the matrix decrease when clusters closely proximate with bigger size and higher degree of clustering.

Methods based on X-ray tomography are developed to study the relevant statistical quantities describing the microstructural inhomogeneity of particulate reinforced composites. The developed methods are applied in estimating microstructural inhomogeneity parameters of composites containing metallic glass particles in metal matrix, extruded in varying pressure loads. This study indicates that the critical characteristics with regard to the effect of particle clustering are cluster size and shape, local volume fraction of particles in the cluster and the distance between clusters. The results demonstrate that the spatial distribution of reinforcement is very uneven and the amount of particle clustering varies with amount of reinforcement. Moreover, X-ray nanotomography was used to investigate the structure of individual clusters and the results suggest that high extrusion load may cause break-up of individual particle clusters so that their shape changes from solid and spherical to broken and ellipsoidal.

This article presents a microscale modelling approach coupled with X-ray computed micro-tomography for the evaluation of material properties of polylactic acid (PLA) reinforced by birch pulp fibers under the effect of moisture. The results in terms of elastic moduli and hygroexpansion deformation were found in good agreement with the measurements taken at different levels of water uptake.

The spatial porosity and mineral distribution of geological materials strongly affects transport processes in them. X-ray micro computed tomography (X-mu CT) has proven to be a powerful tool for characterizing the spatial mineral distribution of geological samples in 3-D. However, limitations in resolution prevent an accurate characterization of pore space especially for tight crystalline rock samples and 2-D methods such as C-14-polymethylmethacrylate (C-14-PMMA) autoradiography and scanning electron microscopy (SEM) are needed. The spatial porosity and mineral distributions of tight crystalline rock samples from Aspo, Sweden, and Olkiluoto, Finland, were studied here. The X-mu CT were used to characterize the spatial distribution of the main minerals in 3-D. Total porosities, fracture porosities, fracture densities and porosity distributions of the samples were determined using the C-14-PMMA autoradiography and characterization of mineral-specific porosities were assisted using chemical staining of rock surfaces. SEM and energy dispersive X-ray spectroscopy (EDS) were used to determine pore apertures and identify the minerals. It was shown that combination of the different imaging techniques creates a powerful tool for the structural characterization of crystalline rock samples. The combination of the results from different methods allowed the construction of spatial porosity, mineral and mineral grain distributions of the samples in 3-D. These spatial distributions enable reactive transport modeling using a more realistic representation of the heterogeneous structure of samples. Furthermore, the realism of the spatial distributions were increased by determinig the densities and porosities of fractures and by the virtual construction heterogeneous mineral distributions of minerals that cannot be separated by X-mu CT.

Adequate measurement of thickness of sheet-like materials or membranes is most important for quantifying their properties such as density, barrier properties and mechanical strength. Depending on the surface roughness of the membrane, the thickness measured by standard micrometre devices (apparent thickness) may considerably overestimate the actual geometrical mean thickness (intrinsic thickness) required for such purposes. In this work, we present a method for correcting the measured apparent thickness value of thin membranes for their surface roughness, thereby obtaining an improved estimate of the intrinsic thickness. The surface roughness data required for the correction can be obtained by common surface profiling techniques. The method includes a calibration parameter, the value of which can be found experimentally by independent measurements, or can be estimated theoretically using results from standard mechanical contact theory. The method is tested on a set of nanofibrillated cellulose films with varying roughness levels controlled by pulp fibre content. The surface topography of film samples was measured using laser profilometry, and the method was calibrated experimentally using data from X-ray microtomographic images for one type of film. The intrinsic thickness estimates given by the new method are generally in good accordance with independent results obtained from X-ray microtomography. peerReviewed

We applied X-ray computed microtomography (μ-CT) in combination with anisotropy of magnetic susceptibility (AMS) analysis to study metamorphic rock fabrics in an oriented drill core sample of pyrite-pyrrhotite-quartz-mica schist. The sample is extracted from the Paleoproterozoic Martimo metasedimentary belt of northern Finland. The μ-CT resolves the spatial distribution, shape and orientation of 25,920 pyrrhotite and 153 pyrite grains localized in mm-thick metapelitic laminae. Together with microstructural analysis, the μ-CT allows us to interpret the prolate symmetry of the AMS ellipsoid and its relationship to the deformation history. AMS of the sample is controlled by pyrrhotite porphyroblasts that grew syntectonically during D1 in subhorizontal microlithons. The short and intermediate axes (K3 and K2) of the AMS ellipsoid interchanged positions during a subsequent deformation (D2) that intensely crenulated S1 and deformed pyrrhotite, while the long axes (K1) maintained a constant position parallel to the maximum stretching direction. However, it is likely that all the three AMS axes switched, similar to the three principal axes of the shape ellipsoid of pyrite porphyroblasts from D1 to D2. The superposition of D1 and D2 produced a type-2 fold interference pattern. peerReviewed

Heterogeneous materials tend to fail at the weakest cross-section, where the presence of microstructural heterogeneities or defects controls the tensile strength. Short-fibre composites are an example of heterogeneous materials, where unwanted fibre agglomerates are likely to initiate tensile failure. In this study, the dimensions and orientation of fibre agglomerates have been analysed from three-dimensional images obtained by X-ray microtomography. The geometry of the specific agglomerate responsible for failure initiation has been identified and correlated with the strength. At the plane of fracture, a defect in the form of a large fibre agglomerate was almost inevitably found. These new experimental findings highlight a problem of some existing strength criteria, which are principally based on a rule of mixture of the strengths of constituent phases, and not on the weakest link. Only a weak correlation was found between stress concentration induced by the critical agglomerate and the strength. A strong correlation was however found between the stress intensity and the strength, which underlines the importance of the size of largest defects in formulation of improved failure criteria for short-fibre composites. The increased use of three-dimensional imaging will facilitate the quantification of dimensions of the critical flaws. peerReviewed

In this experimental study, the performance of injection-molded short flax and hemp fibers in plasticized starch acetate were analyzed in terms of strength. Parameters involved in the analysis are a variable fiber and plasticizer content. The measured strength of the composites varies in the range of 12–51 MPa for flax fibers and 11–42 MPa for hemp fibers, which is significantly higher than the properties of the unreinforced starch acetate matrix. The micro-structural parameters used in modeling of composite strength were obtained from optical observations and indirect measurements. Some of these parameters were qualitatively verified by X-ray microtomography.

Swelling of cellulose fibres in composite materials : Constraint effects of the surrounding matrix

This paper studies failure of birch pulp–polylactic acid composites. Stiffness and strength are calculated using the theory of short fibre composites and the results are compared to experimental data. The results differed from the experimental values by 0–6%. With less aligned fibres the short fibre theory is not feasible. The performance of the 40 wt% birch pulp – polylactic acid composite is predicted with X-ray microtomography based finite element modelling, and the results are compared with experiments. Stiffness results differed from experiments by 1–17% . By adding into the models a third material phase representing the interface between the fibres and the matrix, the stress–strain curve of the composite was obtained with good accuracy. The work presents finite element modelling methodology of wood plastic composites and the critical further steps needed in order to assess the stress–strain behaviour, strength and stiffness. Tools for comparing different wood plastic composite microstructures are also presented.

Natural fibre composites are prone to absorb moisture from the environment which may lead to dimensional changes, mold growth, degradation of mechanical properties or other adverse effects. In this work we develop a method for direct non-intrusive measurement of local moisture content inside a material sample. The method is based on X-ray microtomography, digital image correlation and image analysis. As a first application of the method we study axial transport of water in a cylindrical polylactic acid/birch pulp composite material sample with one end exposed to water. Based on the results, the method seems to give plausible estimates of water content profiles inside the cylindrical sample. The results may be used, e.g., in developing and validating models of moisture transport in biocomposites. peerReviewed

The interfacial shear strength of short regenerated cellulose fibre/polylactide composites was characterized by means of an industry-friendly adhesion test method. The interfacial shear strength was back-calculated from the experimental tensile stress-strain curves of composites by using a micro-mechanical model. The parameters characterizing the microstructure of the composites, e.g. fibre length and orientation distributions, used as input in the model were obtained by micro-tomography. The investigation was carried out on composites with untreated and surface treated fibres with various fibre weight contents (5wt%, 10wt%, and 15wt% for untreated fibres, and 15wt% for treated fibres). The properties of fibres were measured by an automated single fibre tensile test method. Based on these results, the efficiency of the fibre treatment to improve fibre/matrix adhesion is evaluated, and the applicability of the method to measure the interfacial shear strength is discussed. The results are compared with data from previous work, and with other results from the literature. peerReviewed

There is a wide range of materials that can be considered as nonwoven random networks of fibres. Such materials include glass-fibre mats, filters, various paper products and structural components of cells and tissues. The mechanical properties of these kinds of networks have been studied extensively for many decades. As many of such networks form more or less two-dimensional structures, they can, to a good approximation, be considered to consist of randomly distributed fibres or filaments connected at their crossings points. Recent development of the resolution of X-ray computed tomography have enabled imaging of the three dimensional structure of such materials with a resolution sufficient to produce accurate information of the fibre network. As the mean segment length, for given elastic properties of the fibers and contacts in the network, essentially affects the elastic response of the network, it is a property of great practical importance, but it has been very difficult to determine. We therefore introduce a method to determine in practice the mean segment length along with the density of fiber-fiber contacts.

Methods are introduced for analysing the shape and orientation of planar fibres from greyscale images of fibrous systems. The sequence of image processing techniques needed for segmentation of fibres is described. The identified fibres were interpreted as deformed line segments for which two shape and two orientation parameters are estimated by the maximum likelihood method. The methods introduced are shown to perform quite well for simulated systems of deformed line segments with known properties. They were applied to TEM images of carbon nanotubes embedded in polycarbonate.

A novel method for computerised estimation of the aspect ratio distribution and various cross-sectional geometrical properties of fibres in short-fibre reinforced composites is proposed. The method, based on X-ray micro-computed tomography, is non-destructive and does not require user intervention. Based on results on specially fabricated model material, the accuracy and precision of the method seems adequate. The method is applied in analysing a manufacturing process of wood fibre reinforced thermoplastic composite. The results indicate a significant decrease of the aspect ratio of fibres during the processing steps. Finally, the feasibility of the method is assessed by estimating parameters of a micromechanical model for flax fibre composites and comparing the results with those from tensile tests. peerReviewed

Lately it has been demonstrated that natural fibres may be an environmentally superior alternative for, e.g., glass fibres. In order to estimate properties of composite materials made of natural fibres, models designed for synthetic fibres are often used. The models usually do not account for irregularities in the material, e.g., suboptimal fibre orientation due to the twisting angle of fibres in yarns. Use of models without taking those features into account might lead to unreliable results. Methods to quantify the microstructural properties of natural fibre composites with X-ray microtomography and three-dimensional image analysis are demonstrated in this work. The methods are applied to flax fibre composites made from three different kinds of pre-forms. Microstructural parameters estimated with the methods are used in micromechanical models for the stiffness of the composite. Comparison between rule-of-mixtures and classical laminate theory is made, highlighting the requirement for accurate parameter estimation and use of a model that accounts for significant structural features of the material. Godkänd; 2015; 20150818 (joffe)

A method based on the curvelet transform is introduced to estimate the orientation distribution from two-dimensional images of small anisotropic particles. Orientation of fibers in paper is considered as a particular application of the method. Theoretical aspects of the suitability of this method are discussed and its efficiency is demonstrated with simulated and real images of fibrous systems. Comparison is made with two traditionally used methods of orientation analysis, and the new curvelet-based method is shown to perform better than these tradi- tional methods. © The Authors. Published by SPIE under a Creative Commons Attribution 3.0 Unported License. Distribution or reproduction of this

The mechanical properties of composites in the fibre direction are mainly attributed to the fibre slenderness, or aspect ratio. A trade-off between performance and processability is usually required, and dependent on the intended application. If the fibre length could be retained or not severely degraded during various processing steps towards the injection-moulded component, a stiffer and stronger composite product could be obtained. The processing steps for injection moulded wood-fibre composites here include: Pulping, commingling, extrusion, pelletizing, and injection moulding. To tune the processing parameters systematically for retained fibre length, it would be useful to investigate the degradation of the original fibre length distribution throughout the processing chain. The fibre length degradation has been monitored by X-ray micro-computed tomography through the processing steps in wood pulp- fibre reinforced polylactide. A significant fibre-length degradation was found, in particular, the extrusion step was found to result in a drastic fibre length reduction. peerReviewed

Nanofibrillated cellulose (NFC) films have potential as oxygen barriers for, e.g., food packaging applications, but their use is limited by their hygroscopic characteristics. The three-dimensional microstructure of NFC films made of Pinus radiata (Radiata Pine) kraft pulp fibres has been assessed in this study, considering the structural development as a function of relative humidity (RH). The surface roughness, micro-porosity, thickness and their correlations were analyzed using X-ray microtomography (X–μCT) and computerized image analysis. The results are compared to those from scanning electron microscopy and laser profilometry. Based on a series of films having varying amounts of 2 , 2 , 6 , 6 -tetramethylpiperidinyl- 1 -oxyl (TEMPO)-mediated oxidated nanofibrils, it was demonstrated that X–μCT is suitable for assessing the surface and bulk 3D microstructure of the cellulose films. Additionally, one of the series was assessed at varying humidity levels, using the non-destructive capabilities of X–μCT and a newly developed humidity chamber for in-situ characterization. The oxygen transmission rate (OTR) of the films ( 20g = m 2 ) was below 3 : 7mLm 2 day 1 at humidity levels below 60% RH. However, the OTR increased considerably to 12 : 4mLm 2 day 1 when the humidity level increased to 80% RH. The increase in OTR was attributed to a change of the film porosity, which was reflected as an increase in local thickness. Hence, the characterization techniques applied in this study shed more light on the structures of NFC films and how they are affected by varying humidity levels. It was demonstrated that in increasing relative humidity the films swelled and the oxygen barrier properties decreased. peerReviewed

The effect of steric hindrance is an important aspect of granular packings as it gives rise to, e.g., limitations on the densities of ordered and disordered packings, both of which are essentially defined by the geometry of the constituents. Here we focus on the random packing of rods via deposition and their distributions of contact number and segment length. Such statistical properties are relevant for mechanical properties of the structures, but the (quite large) steric effects on them have not been addressed in previous studies. We therefore develop a theory that describes the statistical properties of rod packings, while taking into account that the deposited rods cannot overlap and thus induce steric hindrances. The distributions derived from the theory are compared with experimental results and numerical simulations of networks constructed via deposition. The results explain the non-Poisson statistics observed in the experiments and show that the induced steric range of the rods can be large compared to their diameter and decreases with compactification of the pile, implying local orientational ordering of the structure.

A method based on the curvelet transform is introduced for estimating from two-dimensional images the orientation distribution of small anisotropic particles. Orientation of fibers in paper is considered as a particular application of the method. Theoretical aspects of the suitability of this method are discussed and its efficiency is demonstrated with simulated and real images of fibrous systems. Comparison is made with two traditionally used methods of orientation analysis, and the new curvelet-based method is shown to perform clearly better than these traditional methods.

Structural Characterisation of Kraft Pulp Fibres and Their Nanofibrillated Materials for Biodegradable Composite Applications