Search

Suspected bacterial arthritis of a native joint requires urgent management to control potential life-threatening sepsis and limit cartilage damage. Diagnosing bacterial arthritis is often challenging and relies on diagnostic tests with low accuracy. A high threshold for surgery poses a risk of undertreatment, whereas a low threshold for surgery could lead to overtreatment with unnecessary invasive and costly procedures. Surgical lavage through arthroscopy or arthrotomy is generally considered standard treatment. Nowadays, needle arthroscopy provides an alternative and potentially less-invasive approach that can safely lower the surgical threshold. Needle arthroscopy can be performed directly upon presentation at the patient's bedside, as it is well tolerated under local anesthesia. Therefore, this Technical Note presents a stepwise guideline for performing standardized needle arthroscopic lavage in patients with (suspected) bacterial arthritis of the shoulder, elbow, wrist, knee, and ankle.

Background: After total knee arthroplasty up to 13% requires revision surgery to address loosening. No current diagnostic modalities have a sensitivity or specificity higher than 70–80% to detect loosening, leading to 20–30% of patients undergoing unnecessary, risky and expensive revision surgery. A reliable imaging modality is required to diagnose loosening. This study presents a new and non-invasive method and evaluates its reproducibility and reliability in a cadaveric study. Methods: Ten cadaveric specimens were implanted with a loosely fitted tibial components and CT scanned under load towards valgus and varus using a loading device. Advanced three-dimensional imaging software was used to quantify displacement. Subsequently, the implants were fixed to the bone and scanned to determine the differences between the fixed and the loose state. Reproducibility errors were quantified using a frozen specimen in which displacement was absent. Findings: Reproducibility errors, expressed as mean target registration error, screw-axis rotation and maximum total point motion were 0.073 mm (SD 0.033), 0.129 degrees (SD 0.039) and 0.116 mm (SD 0.031), respectively. In the loose condition, all displacements and rotation changes were larger than the reported reproducibility errors. Comparing the mean target registration error, screw axis rotation and maximum total point motion in the loose condition to the fixed condition resulted in mean differences of 0.463 mm (SD 0.279; p = 0.001), 1.769 degrees (SD 0.868; p < 0.001) and 1.339 mm (SD 0.712; p < 0.001), respectively. Interpretation: The results of this cadaveric study show that this non-invasive method is reproducible and reliable for detection of displacement differences between fixed and loose tibial components.

PurposeTo assess the feasibility of needle arthroscopy for management of suspected bacterial arthritis in native joints.MethodsDuring a pilot period, patients presenting with symptoms suggestive of native joint bacterial arthritis were eligible for initial management with needle arthroscopy. Procedures were performed in the operating theatre or at the patient bedside in the emergency department or inpatient ward. As our primary outcome measure, it was assessed whether needle arthroscopic lavage resulted in a clear joint. In addition, the need for conversion to standard arthroscopy or arthrotomy, the need for conversion from local to general anaesthesia, complications and the need for additional surgical intervention at follow-up during admission were recorded.ResultsEleven joints in 10 patients (four males, age range 35 – 77) were managed with needle arthroscopy. Needle arthroscopic lavage resulted in a clear joint in all cases. Conversion to standard arthroscopy or arthrotomy was not needed. Seven procedures were performed at the patient bedside using local anaesthesia. These procedures were well tolerated and conversion to general or spinal anaesthesia was not required. There were no procedure complications. One patient received multiple needle arthroscopic lavages. No further surgical interventions beside the initial needle arthroscopic lavage were required for successful management in other cases.ConclusionsNeedle arthroscopy can be a feasible tool in the initial management of complaints suggestive for native joint bacterial arthritis, providing an effective, quick and well-tolerable intervention in the operating theatre or at the patient bedside, with the potential to relief health systems from need for scarce operating theatre time.

Purpose Three out of ten patients do not return to work after total knee arthroplasty (TKA). Patient expectations are suggested to play a key role. What are patients’ expectations regarding the ability to perform work-related knee-demanding activities 6 months after TKA compared to their preoperative status? Methods A multi-center cross-sectional study was performed among 292 working patients listed for TKA. The Work Osteoarthritis or joint-Replacement Questionnaire (WORQ, range 0–100, minimal important difference 13) was used to assess the preoperatively experienced and expected ability to perform work-related knee-demanding activities 6 months postoperatively. Differences between the preoperative and expected WORQ scores were tested and the most difficult knee-demanding work-related activities were described. Results Two hundred thirty-six working patients (81%) completed the questionnaire. Patients’ expected WORQ score (Median = 75, IQR 60–86) was significantly (p

Purpose: It is not yet known if unicompartmental knee arthroplasty (UKA) patients are more likely to return to work sooner or have improved ability to work (i.e., workability) than total knee arthroplasty (TKA) patients. The following questions were addressed: patients were assessed to determine: (1) whether they returned to work sooner following UKA compared to TKA; (2) whether UKA patients had better WORQ function scores compared to TKA patients; and (3) if UKA patients have higher workability scores and greater satisfaction regarding workability than TKA patients. Methods: A multicenter retrospective cohort study was performed that included patients at least 2 years after having undergone either UKA or TKA surgery and on the condition that patients had been in work in the 2 years prior to surgery. Time period between stopping work and returning to work was assessed; the WORQ scores (0 = worst–100 = best) and the Work Ability Index (WAI = 0–10) and reported satisfaction with work ability. Results: UKA patients (n = 157, median 60 years, 51% male) were compared to TKA patients (n = 167, median 60 years, 49% male) (n.s.). Of the 157 UKA patients, 115 (73%) returned to work within 2 years compared to 121 (72%) of TKA patients (n.s.). More UKA patients return to work within 3 months (73% versus 48%) (p < 0.01). WORQ scores improved similarly in both groups. The WAI was also comparable between the groups. Dissatisfaction with workability was comparable (UKA 15% versus TKA 18% (n.s.). Conclusion: TKA and UKA patients have similar WORQ, WAI, and satisfaction scores. However, in this study population, UKA patients to return to work after surgery significantly sooner than TKA patients, which improves their quality of life and allows them to participate actively in society. This information can help health care providers and patients weigh-up the pros and cons and choose the best treatment and timing for patients in the working population. Level of evidence: III.

Introduction: We tested whether a mechanical device (such as Hipsecure) to pinpoint the anterior pelvic plane (APP) as a guide can improve acetabular cup placement. To assess accuracy we asked: (1) is the APP an effective guide to position acetabular cup placement within acceptable ° of divergence from the optimal 40° inclination and 15° anteversion; (2) could a mechanical device increase the number of acetabular cup placements within Lewinnek’s safe zone (i.e. inclination 30° to 50°; anteversion 5° to 25°)? Methods: 16 cadaveric specimens were used to assess the 3D surgical success of using a mechanical device APP to guide acetabular cup placement along the APP. We used the Hipsecure mechanical device to implant acetabular cups at 40° inclination and 15° anteversion. Subequently, all cadaveric specimens with implants were scanned with a CT and 3D models were created of the pelvis and acetabular cups to assess the outcome in terms of Lewinnek’s safe zones. Results: The mean inclination of the 16 implants was 40.6° (95% CI, 37.7–43.4) and the mean anteversion angle was 13.4° (95% CI, 10.7–16.1). All 16 cup placements were within Lewinnek’s safe zone for inclination (between 30° and 50°) and all but 2 were within Lewinnek’s safe zone for anteversion (between 5° and 25°). Conclusion: In cadaveric specimens, the use of a mechanical device and the APP as a guide for acetabular cup placement resulted in good positioning with respect to both of Lewinnek’s safe zones.

Purpose Malalignment of implants is a major source of failure during total knee arthroplasty. To achieve more accurate 3D planning and execution of the osteotomy cuts during surgery, the Signature (Biomet, Warsaw) patient-specific instrumentation (PSI) was used to produce pin guides for the positioning of the osteotomy blocks by means of computer-aided manufacture based on CT scan images. The research question of this study is: what is the transfer accuracy of osteotomy planes predicted by the Signature PSI system for preoperative 3D planning and intraoperative block-guided pin placement to perform total knee arthroplasty procedures? Methods The transfer accuracy achieved by using the Signature PSI system was evaluated by comparing the osteotomy planes predicted preoperatively with the osteotomy planes seen intraoperatively in human cadaveric legs. Outcomes were measured in terms of translational and rotational errors (varus, valgus, flexion, extension and axial rotation) for both tibia and femur osteotomies. Results Average translational errors between the osteotomy planes predicted using the Signature system and the actual osteotomy planes achieved was 0.8 mm (± 0.5 mm) for the tibia and 0.7 mm (± 4.0 mm) for the femur. Average rotational errors in relation to predicted and achieved osteotomy planes were 0.1° (± 1.2°) of varus and 0.4° (± 1.7°) of anterior slope (extension) for the tibia, and 2.8° (± 2.0°) of varus and 0.9° (± 2.7°) of flexion and 1.4° (± 2.2°) of external rotation for the femur. Conclusion The similarity between osteotomy planes predicted using the Signature system and osteotomy planes actually achieved was excellent for the tibia although some discrepancies were seen for the femur. The use of 3D system techniques in TKA surgery can provide accurate intraoperative guidance, especially for patients with deformed bone, tailored to individual patients and ensure better placement of the implant.

Total knee arthroplasty (TKA) is increasingly being performed among working patients suffering from knee osteoarthritis. Two out of ten patients do not return to work (RTW) after TKA. Little evidence is available about these patients to guide clinicians. Therefore, this study investigates patients’ characteristics associated with no RTW. A multicenter retrospective cohort study was performed among working patients having undergone a primary TKA during 2005–2010. The following preoperative characteristics were assessed: age at surgery, sex, comorbidity, body mass index (BMI), preoperative sick-leave duration, patient-reported work-relatedness of knee symptoms, and physical job demands. In addition, the Knee injury and Osteoarthritis Outcome Scores (KOOS) after TKA were assessed. Backward stepwise logistic regression analyses were performed to predict no RTW. Seven hundred and sixty-four patients were approached, and 558 patients (73 %) responded. One hundred and sixty-seven met the inclusion criteria and 46 did not RTW. A preoperative sick-leave duration >2 weeks (OR 12.5, 90 % CI 5.0–31.5) was most strongly associated with no RTW. Other associations found were: female sex (OR 3.2, 90 % CI 1.3–8.2), BMI ≥ 30 (OR 2.8, 90 % CI 1.1–7.1), patient-reported work-relatedness of knee symptoms (OR 5.3, 90 % CI 2.0–14.1), and a physically knee-demanding job (OR 3.3, 90 % CI 1.2–8.9). Age and KOOS were not associated with no RTW. Especially obese female workers, with a preoperative sick-leave duration >2 weeks, who perform knee-demanding work and indicate that their knee symptoms are work-related have a high chance for no RTW after TKA. These results stress the importance of a more timely referral for work-directed care of patients at risk for no RTW after TKA.

De knieprothese is een succesvolle operatie voor vermindering van pijn bij artrose van de knie. Voor weer kunnen werken, lijken de resultaten minder gunstig.

BackgroundOsteoarthritis of the knee is considered to be related to knee straining activities at work. The objective of this review is to assess the exposure dose-response relation between kneeling or squatting, lifting, and climbing stairs at work, and knee osteoarthritis.MethodsWe included cohort and case–control studies. For each study that reported enough data, we calculated the odds ratio (OR) per 5,000 hours of cumulative kneeling and per 100,000 kg of cumulative lifting. We pooled these incremental ORs in a random effects meta-analysis.ResultsWe included 15 studies (2 cohort and 13 case–control studies) of which nine assessed risks in more than two exposure categories. We considered all but one study at high risk of bias. The incremental OR per 5,000 hours of kneeling was 1.26 (95% confidence interval 1.17–1.35, 5 studies, moderate quality evidence) for a log-linear exposure dose-response model. For lifting, there was no exposure dose-response per 100,000 kg of lifetime lifting (OR 1.00, 95% confidence interval 1.00–1.01). For climbing, an exposure dose-response could not be calculated.ConclusionThere is moderate quality evidence that longer cumulative exposure to kneeling or squatting at work leads to a higher risk of osteoarthritis of the knee. For other exposure, there was no exposure dose-response or there were insufficient data to establish this. More reliable exposure measurements would increase the quality of the evidence.

Purpose: Evidence-based advice for return to work (RTW) after anterior cruciate ligament (ACL) reconstruction is not available. Therefore, the objectives of this study were to determine when patients achieve full RTW, and to explore the beneficial and limiting factors for fully RTW after ACL reconstruction. Methods: A retrospective cohort study was performed after ACL reconstruction among 185 patients in one hospital. Data from patient files and a questionnaire were used to explore whether patient-, injury-, surgery-, sports-, work- and rehabilitation-related factors are beneficial or limiting for fully RTW after ACL reconstruction, using a backward stepwise logistic regression analysis. Results: Of the 125 (68%) patients that returned the questionnaire, 36 were not part of the working population. Of the remaining 89 patients, 82 patients (92%) had returned fully to work at follow-up. The median time to fully RTW was 78 days. In the final regression model, which explained 29% of the variance, a significant OR of 5.4 (90% CI 2.2–13.1) for RTW > 78 days was observed for patients performing heavy knee-demanding work compared to patients performing light knee-demanding work. In addition, a significant and positive OR (1.6, 90% CI 1.2–1.9) for the number of weeks walking with the aid of crutches for RTW > 78 days was observed in the final model. Conclusion: After ACL reconstruction, 92% of the patients fully return to work at a median time of 78 days. The significant predictors for fully RTW > 78 days are performing heavy knee-demanding work and a longer period of walking aided with crutches after ACL reconstruction.

A cross-sectional study in two hospitals was performed on 807 patients with a primary Vanguard (Biomet) total knee Arthroplasty (TKA). The research questions addressed were (1) what are the two- and six year survival rates of the Vanguard, (2) what are the clinical outcome scores, (3) what are the findings at revision and (4) what are predictors for revision? The mean age at time of surgery was 67.0 (SD 10.0). The mean follow-up was 3.6years (95% CI 3.56–3.73). At two years the survival was 97.2% for all-reasons (767 patients remaining) and 99%, for prosthesis-related-reasons (777 remaining). At six years this was 96.5% (40 remaining) and 98.6% (41 remaining). The mean clinical results (84% response on KOOS, Oxford and NRS) were good. A previous osteotomy was a risk factor for revision (hazard ratio 5.1, P =0.001). This early experience with the Vanguard shows a good survival with no adverse outcomes related to the implant and therefore further use of the implant is justified.

Accurate transfer of a preoperatively planned osteotomy plane to the bone is of significance for corrective surgery, tumor resection, implant positioning and evaluation of new osteotomy techniques. Methods for comparing a preoperatively planned osteotomy plane with a surgical cut exist but the accuracy of these techniques are either limited or unknown. This paper proposes and evaluates a CT-based technique that enables comparing virtual with actual osteotomy planes. The methodological accuracy and reproducibility of the technique is evaluated using CT-derived volume data of a cadaver limb, which serves to plan TKA osteotomies in 3-D space and to simulate perfect osteotomies not hampered by surgical errors. The methodological variability of the technique is further investigated with repeated CT scans after actual osteotomy surgery of the same cadaver specimen. Plane displacement (derr) and angulation errors in the sagittal and coronal plane (βerr, γerr) are measured with high accuracy and reproducibility (derr=-0.11±0.06mm; βerr=0.08±0.04°, γerr=-0.03±0.03°). The proposed method for evaluating an osteotomy plane position and orientation has a high intrinsic accuracy and reproducibility. The method can be of great value for measuring the transfer accuracy of new techniques for positioning and orienting a surgical cut in 3-D space.

To translate and validate the Kujala Anterior Knee Pain Scale (AKPS) in patients who have undergone total knee arthroplasty (TKA) or unicompartmental knee arthroplasty (UKA) and evaluate the internal consistency, construct validity and ceiling or floor effect. After standard forward and backward translation was performed, 302 patients who have received a TKA or UKA filled out the AKPS together with Hospital for Special Surgery (HSS) patella score, visual analogue score (VAS) for pain, the Oxford 12-item questionnaire and the SF-36 at follow-up. The internal consistency was tested using Cronbach’s α coefficient. The construct validity was assessed using Spearman’s rank correlation (R) to test for correlations between the AKPS and VAS HSS, HSS patella score, VAS month, Oxford 12-item questionnaire and SF-36 subscales. Ceiling or floor effects are given in percentage of patients giving a maximum or minimum score. The internal reliability of the AKPS is acceptable with a Cronbach’s α of 0.81 in patients after TKA or UKA. A high correlation was found between the AKPS and the Oxford 12-item questionnaire (R = 0.81). Moderate correlations were found with the VAS month (R = 0.63), HSS patella score (R = 0.51) and SF-36 subscales physical functioning (R = 0.59), role-physical (R = 0.59), bodily pain (R = 0.57). Other correlations were poor, therefore indicating a good convergent and divergent validity. Ceiling effects were observed for the HSS patella score (31 %), VAS HSS (51 %), VAS pain (19 %), SF36-RP (46 %), SF36-RE (80 %) and SF36-BP (24 %). No ceiling or floor effect was found for the AKPS, Oxford 12-item and the other SF36 domains. The AKPS appears to be reliable and valid in patients after knee arthroplasty, with no ceiling and floor effects, and can be used to assess anterior knee pain in patient who underwent joint replacement surgery. Diagnostic study, Level I.

We report a case of genu recurvatum following eight-Plate epiphysiodesis and the successful treatment of this complication. A 10-year-old patient underwent epiphysiodesis of the knee with eight-Plates. She was followed up and genu recurvatum developed as a complication. At the 12-month follow-up after epiphysiodesis, the treated knee showed a flexion of 135° and an extension of 35°. Lateral radiograph evaluation showed an extension change of the femur. During reoperation, the eight-Plates were repositioned more posterior, which resulted in successful treatment of the hyperextension. Eight-Plates can lead to (treatable) articular surface angle changes in the sagittal plane.

For operative treatment of talar osteochondral defects (OCD), several surgical treatment options are available [ 14 ]. Each surgical technique has its specifi c indication [ 11 ]. Debridement and bone marrow stimulation is the first treatment of choice in primary defects

Contains fulltext : 89902.pdf (Publisher’s version ) (Closed access) BACKGROUND: Treatment safety and effectiveness of total parathyroidectomy and autotransplantation for secondary and tertiary hyperparathyroidism have been extensively proven in adults; the evidence for children, however, is scarce. Children and adolescents cannot simply be seen as young adults in the case of chronic kidney disease and hyperparathyroidism. The aim of this retrospective study was therefore, to evaluate whether parathyroidectomy with forearm autograft is as effective and safe in children and adolescents as in adults. METHODS: A group of 64 adults and 8 children and adolescents treated for secondary or tertiary hyperparathyroidism were retrieved from our database. The outcomes were compared on patient demographics, operation results, and blood parameters consisting of parathyroid hormone (PTH) and calcium levels. Our results were compared with all currently available articles on parathyroidectomy in children with secondary or tertiary hyperparathyroidism (n = 11). RESULTS: For adults, preoperative mean serum calcium was 2.67 +/- 0.29 mmol/l and mean parathyroid hormone (PTH) level was 120 +/- 86 pmol/l. For children, preoperative mean serum calcium was 2.62 +/- 0.20 mmol/l and mean parathyroid hormone (PTH) level was 80 +/- 38 pmol/l. Postoperative calcium and parathyroid hormone levels for adults dropped to 2.39 +/- 0.23 mmol/l and 30 +/- 53 pmol/l, respectively. Postoperative calcium and parathyroid hormone levels for children dropped to 2.41 +/- 0.16 mmol/l and 26 +/- 33 pmol/l, respectively. The effectiveness of parathyroidectomy with autotransplantation was 75% in children and 72% in adults. Thus, effectiveness did not differ significantly between children and adults. CONCLUSIONS: Combining the results of our own study with a literature review on pediatric parathyroidectomy, we conclude that parathyroidectomy and forearm autograft is as effective a treatment for secondary and tertiary hyperparathyroidism in children and adolescents as it is in adults. 01 mei 2010

The number of patients receiving a TKA during working life is increasing but little is known about the impact of TKA on patients' reintegration into the workplace. In this cross-sectional survey it was found that 173 of 480 responders worked within 2 years prior to surgery. Sixty-three percent of the working patients stopped within two weeks prior to surgery and 102 patients returned within 6 months. One third never returned to work. Activities that most improved were operating foot pedals, operating vehicles, standing and walking on level terrain. Activities that least improved were kneeling, crouching and clambering. Fifty patients scored 5 or less on the Work Ability Index. Thirty patients were dissatisfied. TKA significantly, but unequally, reduces difficulties in carrying out knee-burdening work activities. (C) 2014 Elsevier Inc. All rights reserved

The Work, Osteoarthritis or joint-Replacement Questionnaire (WORQ) was developed to assess physical difficulty experienced in work before or following total knee arthroplasty (TKA). Thirteen questions were designed. The WORQ was tested for internal consistency by factor analysis, internal reliability (Crohnbach's alpha), and construct validity. A test-retest reproducibility was performed for analyzing standard error of measurement (SEM agreement), reliability (ICC) and smallest detectable change (SDC) in individuals and groups. Lastly responsiveness (standardized response means [SRM]), floor and ceiling effects and interpretability (minimal important change [MIC]) were analyzed. It is shown that the WORQ is a reliable, valid and responsive questionnaire that can be used to evaluate the impact of knee complaints following TKA on patients' ability to work. (C) 2014 Elsevier Inc. All rights reserved