Search

The next-generation wireless technology that can fulfill such a demand, namely the fifth-generation (5G) technology, should provide 1000 times larger capacity. Moreover, sixth-generation (6G) communication, which represents a significant upgrade from the fifth-generation (5G) network and is anticipated to operate from 100 GHz to 3 THz band, will be required in the years after 2030 due to newly developed data-hungry applications and the greatly expanded wireless network. To meet the ever-growing demands of wireless carriers, an efficient wireless access method that can improve wireless area throughput without expanding bandwidth or cell size is required. Radio Frequency (RF) Orbital Angular Momentum vortex waves (which is now on referred to as OAM waves) to address the concerns mentioned above have attracted much attention in recent years. Due to their orthogonality, different OAM waves of different modes can be multiplexed in the same frequency channel, which can greatly increase the channel capacity. Using the orthogonal modes, a new type of multiple access scheme known as Mode Domain Multiple Access (MDMA) can be used by multiple users using the same frequency channel without additional resources such as frequency and time. As a result, the channel capacity for the next generation wireless communication systems can be enhanced as well as the overall spectrum efficiency can be improved. This review paper begins with an overview of the next generation communication such as 5G communication technology and beyond. This paper first briefly discusses the theory of OAM waves and several methods to generate OAM waves. Various different designs have also been analyzed for their ability to generate OAM waves and discussion on several restrictions and solutions to resolve. Open concerns and development trends are discussed for possible future RF OAM antenna upgrades. This study also proposes that for next generation wireless communication employing OAM, the typically used Uniform Circular Array (UCA) could be paired with the Multiple-Input-Multiple-Output (MIMO) system to improve performance in dense or urban areas for multiusers. In addition, the purity of OAM-modes needs to be considered for efficient utilization of the OAM system for future communications at the radio domain.

This paper presents a hybrid mutual coupling reduction technique applied onto a dual-band textile MIMO antenna for wireless body area network and 5G applications. The MIMO antenna consists of two hexagonal patch antennas, each integrated with a split-ring (SR) and a bar slot to operate in dual-band mode at 2.45 GHz and 3.5 GHz. Each patch is dimensioned at $47.2 \times 31$ mm2. This hybrid technique results in a simple structure, while enabling significant reduction of mutual coupling (MC) between the closely spaced patches (up to $0.1\lambda$ ). This technique combines a line patch and a patch rotation technique, explained as follows. First, a line patch is introduced at an optimized distance to enable operation with a broad impedance bandwidth at both target frequencies. One of the patches is then rotated by 90° at an optimized distance, resulting in a significant MC suppression while maintaining the dual and broad impedance bandwidth. The proposed MIMO antenna is further evaluated under several bending configurations to assess its robustness. A satisfactory agreement between simulated and measured results is observed in both planar and bending conditions. Results show that the MIMO antenna achieves an impedance bandwidth of 4.3 % and 6.79 % in the 2.45 GHz and 3.5 GHz band, respectively. Moreover, very low MC ( $S_{21} < -30$ dB) is achieved, with a low (< 0.002) envelop correlation coefficient, and about 10 dB of diversity gain at both desired frequencies using this technique. Even when bent at an angle of 50° at the $x$ - and $y$ -axes, the antenna bent maintained a realized gain of 1.878 dBi and 4.027 dBi in the lower and upper band, respectively. A robust performance is offered by the antenna against the lossy effects of the human body with good agreements between simulated and measured results.

This paper presents the generation of orbital angular momentum (OAM) vortex waves with mode +1 using dielectric resonator antenna (DRA) array. The proposed antenna was designed and fabricated using FR-4 substrate to generate OAM mode +1 at 3.56 GHz (5G new radio band). The proposed antenna consists of 2 × 2 rectangular DRA array, a feeding network, and four cross slots etched on the ground plane. The proposed antenna succeeded in generating OAM waves; this was confirmed by the measured radiation pattern (2D polar form), simulated phase distribution, and intensity distribution. Moreover, mode purity analysis was carried out to verify the generation of OAM mode +1, and the purity obtained was 53.87%. The antenna operates from 3.2 to 3.66 GHz with a maximum gain of 7.3 dBi. Compared with previous designs, this proposed antenna is low-profile and easy to fabricate. In addition, the proposed antenna has a compact structure, wide bandwidth, high gain, and low losses, thus meeting the requirements of 5G NR applications.