Search

Online virtual museum tours combine museum authority and an academic approach with the diversity and interactivity of online resources; such tours have become an essential resource for online scientific research and education. Many important museums around the world are developing this type of online service. Comprehensive evaluation of such tours is, however, urgently needed to ensure effectiveness. This paper establishes a heuristic evaluation scale based on the literature. Taking the online virtual tour of the Exhibition of Architecture of the Forbidden City as a case study, confirmatory factor analysis was then carried out to improve the scale. Interviews were conducted to discuss and analyze the research results. The developed evaluation scale has four dimensions: authenticity, interaction, navigation, and learning. The results from the case study showed, first, that the exhibition had visual authenticity, but the behavioral authenticity was insufficient; second, the exhibition was generally interactive, but this aspect could be improved by enriching the links; third, the lack of effective navigation design for the exhibit was the main factor affecting experience quality. Fourth, the exhibition was informative and supported learning, but needs further improvement to the quantity and quality of information provided. Finally, the interviews revealed that the online exhibition did not entirely support people of different ages and abilities, so it needs further improvement to be wholly inclusive., Competing Interests: The authors have declared that no competing interests exist.

The cable-beam anchorage zone is the vital load-bearing component in suspension bridge. For maintenance of such structure, a method of probabilistic optimization was proposed by combining linear elastic fracture mechanics, structural reliability and life cycle cost analysis. In this method, the optimal maintenance time is obtained by determining the relative proportion between the costs under the condition that the structural reliability is higher than the minimum allowable reliability. While, the minimum total maintenance cost is obtained by determining the maintenance interval. Then, an example is presented to verify this method, with the following conclusions: the reliability index is inversely proportional to the failure probability, the change of maintenance cost and failure cost affects the optimal maintenance time, the optimal maintenance time will be ahead of time when consider the risk cost. And finally, when the maintenance time interval is determined, the optimal maintenance cost is affected by the maintenance probability and the failure probability.

Objectives: to report the experience of using architectural designs of a hospital for a historical documentary research., Methods: report of the experience of the methodological route of using architectural designs of a model hospital from 1974 to 2002., Results: after being spread on a worksheet, the projects of interest were selected, enabling the data arrangement, where the analytical chart was applied, containing: context; authorship; authenticity/ reliability; nature of the text and preliminary analysis. The findings were grouped by pertinence and similarity, resulting in the construction of categories of analysis., Final Considerations: architectural design is a challenging source, both for its pursuit, since it took two and a half years until it was legally licensed, as well as for involving specific terminologies and symbology of its own. A special attention should be given to the selection criteria, organization and analysis of the document, and sharing the access of unusual sources with the health area, like this one, so as to stimulate the development of research.

In atmospheric environment, the layout difference of urban buildings has a powerful influence on accelerating or inhibiting the dispersion of particle matters (PM). In industrial cities, buildings of variable heights can obstruct the diffusion of PM from industrial stacks. In this study, PM dispersed within building groups was simulated by Reynolds-averaged Navier-Stokes equations coupled Lagrangian approach. Four typical street building arrangements were used: (a) a low-rise building block with Height/base H/b = 1 (b = 20 m); (b) step-up building layout (H/b = 1, 2, 3, 4); (c) step-down building layout (H/b = 4, 3, 2, 1); (d) high-rise building block (H/b = 5). Profiles of stream functions and turbulence intensity were used to examine the effect of various building layouts on atmospheric airflow. Here, concepts of particle suspension fraction and concentration distribution were used to evaluate the effect of wind speed on fine particle transport. These parameters showed that step-up building layouts accelerated top airflow and diffused more particles into street canyons, likely having adverse effects on resident health. In renewal old industry areas, the step-down building arrangement which can hinder PM dispersion from high-level stacks should be constructed preferentially. High turbulent intensity results in formation of a strong vortex that hinders particles into the street canyons. It is found that an increase in wind speed enhanced particle transport and reduced local particle concentrations, however, it did not affect the relative location of high particle concentration zones, which are related to building height and layout., Implications: This study has demonstrated the height variation and layout of urban architecture affect the local concentration distribution of particulate matter (PM) in the atmosphere and for the first time that wind velocity has particular effects on PM transport in various building groups. The findings may have general implications in optimization the building layout based on particle transport characteristics during the renewal of industrial cities. For city planners, the results and conclusions are useful for improving the local air quality. The study method also can be used to calculate the explosion risk of industrial dust for people who live in industrial cities.

Background: Occupying new, active design office buildings designed for health promotion and connectivity provides an opportunity to evaluate indoor environment effects on healthy behaviour, sedentariness and workplace perceptions., Aims: To determine if moving to a health-promoting building changed workplace physical activity, sedentary behaviour, workplace perceptions and productivity., Methods: Participants from four locations at the University of Sydney, Australia, relocated into a new active design building. After consent, participants completed an online questionnaire 2 months before moving and 2 months after. Questions related to health behaviours (physical activity and sitting time), musculoskeletal issues, perceptions of the office environment, productivity and engagement., Results: There were 34 participants (60% aged 25-45, 78% female, 84% employed full-time); 21 participants provided complete data. Results showed that after the move participants spent less work time sitting (83-70%; P < 0.01) and more time standing (9-21%; P < 0.01), while walking time remained unchanged. Participants reported less low back pain (P < 0.01). Sixty per cent of participants in the new workplace were in an open-plan office, compared to 16% before moving. Participants perceived the new work environment as more stimulating, better lit and ventilated, but noisier and providing less storage. No difference was reported in daily physical activity, number of stairs climbed or productivity., Conclusions: Moving to an active design building appeared to have physical health-promoting effects on workers, but workers' perceptions about the new work environment varied. These results will inform future studies in other new buildings., (© The Author 2016. Published by Oxford University Press on behalf of the Society of Occupational Medicine. All rights reserved. For Permissions, please email: journals.permissions@oup.com.)

Since the earthquakes in Northridge and Kobe in 1994 and 1995, respectively, many investigations have been carried out towards improving the strength and ductility of steel beam to column pre- and post-Northridge connections. In order to achieve these objectives, recent researches are mainly focused on three principles: reducing the beam section to improve the beam ductility, adding different kinds of slit damper to beam and column flanges to absorb and dissipate the input earthquake energy in the connection and strengthening the connection area using additional elements such as rib plates, cover plates, and flange plates to keep the plastic hinges away from the column face. This paper presents a reduced beam section approach via the introduction of multilongitudinal voids (MLV) in the beam web for various beam depths varying from 450 mm to 912 mm. ANSYS finite element program was used to simulate the three different sizes of SAC sections: SAC3, SAC5, and SAC7. Results showed an improvement in the connection ductility since the input energy was dissipated uniformly along the beam length and the total rotation of the connection was over four percent radian.

The goal of this study is to investigate the structural performance of reinforced concrete building under the influence of severe typhoon. For this purpose, full-scale monitoring of a 22-story reinforced concrete building was conducted during the entire passage process of a severe typhoon "Vicente." Vicente was the eighth tropical storm developed in the Western North Pacific Ocean and the South China Sea in 2012. Moreover, it was the strongest and most devastating typhoon that struck Macao since 1999. The overall duration of the typhoon affected period that lasted more than 70 hours and the typhoon eye region covered Macao for around one hour. The wind and structural response measurements were acquired throughout the entire typhoon affected period. The wind characteristics were analyzed using the measured wind data including the wind speed and wind direction time histories. Besides, the structural response measurements of the monitored building were utilized for modal identification using the Bayesian spectral density approach. Detailed analysis of the field data and the typhoon generated effects on the structural performance are discussed.

The aim of this paper is to argue for a number of statements about what is important for a client to do in order to improve quality in new infrastructure projects, with a focus on procurement and organizational issues. The paper synthesizes theoretical and empirical results concerning organizational performance, especially the role of the client for the quality of a project. The theoretical framework used is contract theory and transaction cost theory, where assumptions about rationality and self-interest are made and where incentive problems, asymmetric information, and moral hazard are central concepts. It is argued that choice of procurement type will not be a crucial factor. There is no procurement method that guarantees a better quality than another. We argue that given the right conditions all procurement methods can give good results, and given the wrong conditions, all of them can lead to low quality. What is crucial is how the client organization manages knowledge and the incentives for the members of the organization. This can be summarized as "organizational culture." One way to improve knowledge and create incentives is to use independent second opinions in a systematic way.

This article presents lessons learned from a design project that explored the possibility of incorporating waste into the design of a school prototype. The authors worked with professional architects, a waste artist, environmental scientists and local waste operators to uncover new uses and applications for discarded items. As a result, bottles, aluminium cans, reclaimed doors, crushed concrete and second-hand bricks, etc. were identified, explored and integrated into the architectural design. This article serves as a catalyst that advocates the use of reclaimed materials in the field of design and planning. In particular, it highlights the challenges and issues that need to be addressed in carrying out design work with waste. Designers and practitioners interested in minimizing waste generation by proposing the use of reclaimed materials will find this article useful.

Background/aim: The design of built environments is a critical factor in facilitating participation for all community members. This study aimed to explore key stakeholders' views on the role and collaboration of occupational therapists and architects in relation to universal design and the built environment. This study is currently the only research to focus on the needs and practices of both occupational therapy and architecture in universal design. The results have implications for both clinical practice and professional education, and highlight an area of developing interest in occupational therapy., Methods: Focus groups and semi-structured telephone interviews were conducted with key stakeholders involved in the design of built environments. Data from these interviews were analysed qualitatively, using codes of interpreted meaning which were then organised into themes., Results: Three main themes emerged in relation to inter-professional collaboration around universal design: 'form vs. function', 'the earlier the better' and 'universal design as a specialist area'., Discussion/conclusions: Although there are areas of synergy between occupational therapy and architecture in universal design, each profession has its own strengths and skills to bring to the design process. Given the multidisciplinary nature of ensuring designs support participation in occupations and roles, both professions could benefit from opportunities to meaningfully collaborate during professional education and in the workplace., (© 2011 The Authors. Australian Occupational Therapy Journal © 2011 Occupational Therapy Australia.)

Geo-sensor networks have traditionally been built up in closed monolithic systems, thus limiting trans-domain usage of real-time measurements. This paper presents the technical infrastructure of a standardised embedded sensing device, which has been developed in the course of the Live Geography approach. The sensor pod implements data provision standards of the Sensor Web Enablement initiative, including an event-based alerting mechanism and location-aware Complex Event Processing functionality for detection of threshold transgression and quality assurance. The goal of this research is that the resultant highly flexible sensing architecture will bring sensor network applications one step further towards the realisation of the vision of a "digital skin for planet earth". The developed infrastructure can potentially have far-reaching impacts on sensor-based monitoring systems through the deployment of ubiquitous and fine-grained sensor networks. This in turn allows for the straight-forward use of live sensor data in existing spatial decision support systems to enable better-informed decision-making.

Purpose: The study expands research on accessibility, comparing compliance scores of aquatic facilities in North Texas built before the 1991 Title III Americans with Disabilities Act Accessibility Guidelines (ADAAG) with facilities built after the 1991 ADAAG and the proposed 2002 supplement., Design: A quasi-experimental design directed the selection of 52 facilities where measurements were taken to determine compliance with ADAAG and the supplement. A focus group provided insight into interpreting which features functioned as barriers or constraints to participation., Setting: Metropolitan statistical area in North Texas., Subjects: A total of 52 aquatic facilities and 12 focus group participants (University of North Texas institutional review board 07-283)., Measure: ADA aquatic facility compliance instrument., Analysis: Frequency, ratios., Results: No facilities were 100% ADA compliant overall, although some facilities were 100% compliant with specific structural domains. Women's restrooms rated lowest (average = 55%), and men's restrooms received the second lowest rating (average = 64%). Focus group results indicated that improperly designed restrooms and pool entries are primary barriers to participation., Conclusion: The findings support a need for stronger enforcement of policies that improve accessibility of facilities. Architectural reviews and construction practices need to be improved. The structural barriers and constraints identified can be limiting factors in efforts aimed at increasing physical activity among individuals with disabilities and individuals with physical limitations.

Although many studies have reported calculations of outdoor particulate matter (PM) associated externalities using ambient data, there is little information on the role buildings, their ventilation and filtration play. This study provides the framework to evaluate the health risk and cost reduction of building, ventilation and filtration strategies from outdoor PM pollution on a nationwide level and applied it to a case study in Singapore. Combining Indoor Air Quality (IAQ) and time weighted exposure models, with established concentration-response functions and monetary valuation methods, mortality and morbidity effects of outdoor PM on the population of Singapore under different building, ventilation and filtration strategies were estimated. Different interventions were made to compare the effects from the current building conditions. The findings demonstrate that building protection effect reduced approximately half the attributable health cases amounting to US$17.7 billion due to PM pollution when compared to levels computed using outdoor data alone. For residential buildings, nationwide adoption of natural ventilation from current state is associated with 28% higher cases of mortality and 13 to 38% higher cases for different morbidities, amounting to US$6.7 billion. The incurred cost is negligible compared to energy costs of air-conditioning. However, nationwide adoption of closed residence and air-conditioning are associated with outcomes including fewer mortality (10 and 6% respectively), fewer morbidities (8 and 4% respectively) and economic savings of US$1.5 and 0.9 billion respectively. The related savings were about a factor of 9 the energy cost for air-conditioning. Nationwide adoption of mechanical ventilation and filtration from current natural ventilation in schools is associated with fewer asthma hospital admissions and exacerbations; although the economic impact is not substantial. Enhanced workplace filtration reduces the mortality and morbidity cases by 14 and 13% respectively amounting to savings of up to US$2.4 billion. The huge costs savings are comparable to the average worker salary and insignificant to energy, installation and rental cost. Despite uncertainty about accurate benefits, this study shows that health and economic gain via different building, ventilation and filtration designs in minimizing ingress of outdoor PM applied to a nationwide scale can be very large. Importantly, the results suggest that PM associated externalities and legislative efforts should not only focus on ambient PM reduction policies but also include building-informed decisions.

If the delivery of healthcare and the creation of architecture share the common goal of improving the quality of life, then the role of healthcare architecture has never been more important.

What are guidelines, why we need them, by whom they are introduced? These are some of the questions that are intended to be approached in this presentation. Apart from the services they offered to the design process and the built environment especially in the health care facilities the main discussion today is if guidelines, norms, standards are necessary tools in healthcare design or they act as barrier in the creation of a proper healing environment.