Search

The substitution of scandium in fullerene single‐molecule magnets (SMMs) DySc2N@C80 and Dy2ScN@C80 by lutetium has been studied to explore the influence of the diamagnetic metal on the SMM performance of dysprosium nitride clusterfullerenes. The use of lutetium led to an improved SMM performance of DyLu2N@C80, which shows a higher blocking temperature of magnetization (TB=9.5 K), longer relaxation times, and broader hysteresis than DySc2N@C80 (TB=6.9 K). At the same time, Dy2LuN@C80 was found to have a similar blocking temperature of magnetization to Dy2ScN@C80 (TB=8 K), but substantially different interactions between the magnetic moments of the dysprosium ions in the Dy2MN clusters. Surprisingly, although the intramolecular dipolar interactions in Dy2LuN@C80 and Dy2ScN@C80 are of similar strength, the exchange interactions in Dy2LuN@C80 are close to zero. Analysis of the low‐frequency molecular and lattice vibrations showed strong mixing of the lattice modes and endohedral cluster librations in k‐space. This mixing simplifies the spin–lattice relaxation by conserving the momentum during the spin flip and helping to distribute the moment and energy further into the lattice.

A key parameter for the low-temperature magnetic coupling of in dinuclear lanthanide single-molecule magnets (SMMs) is the barrier $U_{FA}$ resulting from the exchange and dipole interactions between the two $4f$ moments. Here we extend the pseudospin model previously used to describe the ground state of dinuclear endofullerenes to account for variations in the orientation of the single-ion anisotropy axes and apply it to the two SMMs Dy$_2$ScN@C$_{80}$ and Dy$_2$TiC@C$_{80}$. While x-ray magnetic circular dichroism (XMCD) indicates the same $J_z=15/2$ Dy groundstate in both molecules, the Dy-Dy coupling strength and the stability of magnetization is distinct. We demonstrate that both the magnitude of the barrier $U_{FA}$ and the angle between the two $4f$ moments are determined directly from precise temperature-dependent magnetization data to an accuracy better than $1^{\circ}$. The experimentally found angles between the $4f$ moments are in excellent agreement with calculated angles between the quantisation axes of the two Dy ions. Theory indicates a larger deviation of the orientation of the Dy magnetic moments from the Dy bond axes to the central ion in Dy$_2$TiC@C$_{80}$. This may explain the lower stability of the magnetisation in Dy$_2$TiC@C$_{80}$, although it exhibits a $\sim 49\%$ stronger exchange coupling than in Dy$_2$ScN@C$_{80}$., 4 figures, 6 pages

Tuning the anisotropy through exchange bias in bimagnetic nanoparticles is an active research strategy for enhancing and tailoring the magnetic properties for a wide range of applications. Here we present a structural and magnetic characterization of unique FeCr-oxide nanoparticles generated from seed material with a Fe : Cr ratio of 4.71 : 1 using a physical aerosol method based on spark ablation. The nanoparticles have a novel bimagnetic structure composed of a 40 nm ferrimagnetic Cr-substituted Fe3O4 structure with 4 nm antiferromagnetic FexO subdomains. Cooling in an applied magnetic field across the Néel temperature of the FexO subdomains results in a significant shift in the hysteresis, demonstrating the presence of a large exchange bias. The observed shift of μ0HE = 460 mT is among the largest values reported for FexO–Fe3O4-based nanoparticles and is attributed to the large antiferromagnetic-ferrimagnetic interface area provided by the subdomains., Here we present a structural and magnetic characterization of a novel bimagnetic nanoparticle composed of a 40 nm Cr-substituted magnetite phase with 4 nm FeO subdomains exhibiting large exchange bias.

Engineering intramolecular exchange interactions between magnetic metal atoms is a ubiquitous strategy for designing molecular magnets. For lanthanides, the localized nature of 4f electrons usually results in weak exchange coupling. Mediating magnetic interactions between lanthanide ions via radical bridges is a fruitful strategy towards stronger coupling. In this work we explore the limiting case when the role of a radical bridge is played by a single unpaired electron. We synthesize an array of air-stable Ln2@C80(CH2Ph) dimetallofullerenes (Ln2 = Y2, Gd2, Tb2, Dy2, Ho2, Er2, TbY, TbGd) featuring a covalent lanthanide-lanthanide bond. The lanthanide spins are glued together by very strong exchange interactions between 4f moments and a single electron residing on the metal–metal bonding orbital. Tb2@C80(CH2Ph) shows a gigantic coercivity of 8.2 Tesla at 5 K and a high 100-s blocking temperature of magnetization of 25.2 K. The Ln-Ln bonding orbital in Ln2@C80(CH2Ph) is redox active, enabling electrochemical tuning of the magnetism., Dilanthanide complexes that possess radical bridges exhibit enhanced magnetic exchange coupling, affording molecular magnets with high blocking temperatures. Here, the authors explore a series of dilanthanide-encapsulated fullerenes where the radical bridge is taken to its limit and the role is played by a single unpaired electron.

Endohedral fullerenes are perfect nanolaboratories for the study of magnetism. The substitution of a diamagnetic scandium atom in Dy2ScN@C80 with gadolinium decreases the stability of a given magnetization and demonstrates Gd to act as a single atom catalyst that accelerates the reaching of thermal equilibrium. X-ray magnetic circular dichroism at the M4,5 edges of Gd and Dy shows that Gd affects the ground state. The Gd magnetic moment follows the sum of the external and the dipolar magnetic field of the two Dy ions and compared to Dy2ScN@C80 a lower exchange barrier is found between the ferromagnetic and the antiferromagnetic Dy configuration. The Arrhenius equilibration barrier as obtained from superconducting quantum interference device magnetometry is more than one order of magnitude larger, though a much smaller prefactor imposes the faster equilibration in Dy2GdN@C80. This sheds light on the importance of angular momentum balance and symmetry in magnetic relaxation.

Tuning the anisotropy through exchange bias in bimagnetic nanoparticles is an active research strategy for enhancing and tailoring the magnetic properties for a wide range of applications. Here we present a structural and magnetic characterization of unique FeCr-oxide nanoparticles generated from seed material with a Fe : Cr ratio of 4.71 : 1 using a physical aerosol method based on spark ablation. The nanoparticles have a novel bimagnetic structure composed of a 40 nm ferrimagnetic Cr-substituted Fe3O4 structure with 4 nm antiferromagnetic FexO subdomains. Cooling in an applied magnetic field across the Neel temperature of the FexO subdomains results in a significant shift in the hysteresis, demonstrating the presence of a large exchange bias. The observed shift of μ0HE = 460 mT is among the largest values reported for FexO-Fe3O4-based nanoparticles and is attributed to the large antiferromagnetic-ferrimagnetic interface area provided by the subdomains.

Magnetic hysteresis is a direct manifestation of nonequilibrium physics that has to be understood if a system is to be used for information storage and processing. The dilanthanide endofullerene ${\mathrm{Tb}}_{2}\mathrm{ScN}@{\mathrm{C}}_{80}$ is shown to be a single-molecule magnet with a remanence time on the order of 100 s at 400 mK. Three different temperature-dependent relaxation barriers are discerned. The lowest 1 K barrier is assigned to intermolecular dipole-dipole interaction, the 10 K barrier to intramolecular exchange and dipolar coupling, and the 50 K barrier to molecular vibrations as was observed for ${\mathrm{Dy}}_{2}\mathrm{ScN}@{\mathrm{C}}_{80}$. The 4 orders of magnitude difference in the prefactor between the Tb and the Dy compound in the decay process across the 10 K barrier is assigned to the lack of Kramers protection in ${\mathrm{Tb}}^{3+}$. The sub-Kelvin hysteresis follows changes in the magnetization at level crossings of the four possible ${\mathrm{Tb}}_{2}$ ground-state configurations. Comparison to a hysteresis model, with magnetic relaxation at level crossings only, reveals cooperative action between nearby molecules.

The magnetic ordering and bistability of one-dimensional chains of endofullerene Dy2ScN@C80 single-molecule magnets (SMMs) packed inside single-walled carbon nanotubes (SWCNTs) have been studied using high-resolution transmission electron microscopy (HRTEM), X-ray magnetic circular dichroism (XMCD), and ab initio calculations. X-ray absorption measurements reveal that the orientation of the encapsulated endofullerenes differs from the isotropic distribution in the bulk sample, indicating a partial ordering of the endofullerenes inside the SWCNTs. The effect of the one-dimensional packing was further investigated by ab initio calculations, demonstrating that for specific tube diameters, the encapsulation is leading to energetically preferential orientations of the endohedral clusters. Additionally, element-specific magnetization curves reveal a decreased magnetic bistability of the encapsulated Dy2ScN@C80 SMMs compared to the bulk analog.

Fused‐pentagons results in an increase of local steric strain according to the isolated pentagon rule (IPR), and for all reported non‐IPR clusterfullerenes multiple (two or three) metals are required to stabilize the strained fused‐pentagons, making it difficult to access the single‐atom properties. Herein, we report the syntheses and isolations of novel non‐IPR mononuclear clusterfullerenes MNC@C76 (M=Tb, Y), in which one pair of strained fused‐pentagon is stabilized by a mononuclear cluster. The molecular structures of MNC@C76 (M=Tb, Y) were determined unambiguously by single‐crystal X‐ray diffraction, featuring a non‐IPR C 2v(19138)‐C76 cage entrapping a nearly linear MNC cluster, which is remarkably different from the triangular MNC cluster within the reported analogous clusterfullerenes based on IPR‐obeying C82 cages. The TbNC@C76 molecule is found to be a field‐induced single‐molecule magnet (SMM).

Nanoparticle generation by aerosol methods, particularly spark ablation, has high potential for creating new material combinations with tailored magnetic properties. By combining elements into complex alloyed nanoparticles and controlling their size and structure, different magnetic properties can be obtained. In combination with controlled deposition, to ensure nanoparticle separation, it is possible to minimize interparticle interactions and measure the intrinsic magnetic property of the nanoparticles. Most magnetic materials are highly sensitive to oxygen, and it is therefore crucial to both understand and control the oxidation of magnetic nanoparticles. In this study, we have successfully generated oxidized, bimetallic FeCr and FeMn nanoparticles by spark ablation in combination with a compaction step and thoroughly characterized individual particles with aerosol instruments, transmission electron microscopy and synchrotron-based X-ray photoelectron spectroscopy. The generated nanoparticles had an almost identical transition-metal ratio to the electrodes used as seed materials. Further, we demonstrate how the carrier gas can be used to dictate the oxidation and how to alternate between self-passivated and entirely oxidized nanoparticles. We also discuss the complexity of compacting alloyed nanoparticles consisting of elements with different vapor pressures and how this will affect the composition. This knowledge will further the understanding of design and generation of complex alloyed nanoparticles based on transition metals using aerosol methods, especially for the size regime where a compaction step is needed. As a proof of concept, measurements using a magnetometer equipped with a superconducting quantum interference device were performed on samples with different particle coverages. These measurements show that the magnetic properties could be explored for both high and low surface coverages, which open a way for studies where interparticle interactions can be systematically controlled.

The use of methane as a reactive gas dramatically increases the selectivity of the arc-discharge synthesis of M-Ti-carbide clusterfullerenes (M=Y, Nd, Gd, Dy, Er, Lu). Optimization of the process parameters allows the synthesis of Dy2TiC@C80-I and its facile isolation in a single chromatographic step. A new type of cluster with an endohedral acetylide unit, M2TiC2@C80, is discovered along with the second isomer of M2TiC@C80. Dy2TiC@C80-(I,II) and Dy2TiC2@C80-I are shown to be single-molecule magnets (SMM), but the presence of the second carbon atom in the cluster Dy2TiC2@C80 leads to substantially poorer SMM properties.

Magnetic properties of endohedral metallofullerenes with nitride clusters DySc(2)N and Dy(2)ScN and different carbon cages are studied by SQUID magnetometry. All molecules behave as single molecule magnets (SMMs) and exhibit magnetic hysteresis. It is found that the blocking temperature of magnetization and relaxation times strongly depend on the fullerene cage, with the C(80)-I(h) isomer offering the best SMM properties.

Methan erhoht als reaktives Gas drastisch die Selektivitat der Lichtbogensynthese von M-Ti-Carbidclusterfullerenen (M=Y, Nd, Gd, Dy, Er, Lu). Ferner ermoglicht die Optimierung der Prozessparameter die Synthese von Dy2TiC@C80-I und dessen einfache Isolierung in einem einzigen chromatographischen Schritt. Neben einem zweiten Isomer des M2TiC@C80 wurde auserdem eine neue Clusterart mit endohedraler Acetylidgruppe, M2TiC2@C80, entdeckt. Weiterhin wirken Dy2TiC@C80-(I,II) und Dy2TiC2@C80-I als Einzelmolekulmagenten (SMMs), jedoch verschlechtert das zweite Kohlenstoffatom im Cluster des Dy2TiC2@C80 die SMM-Eigenschaften erheblich.

Increasing the temperature at which molecules behave as single-molecule magnets is a serious challenge in molecular magnetism. One of the ways to address this problem is to create the molecules with strongly coupled lanthanide ions. In this work, endohedral metallofullerenes Y2@C80 and Dy2@C80 are obtained in the form of air-stable benzyl monoadducts. Both feature an unpaired electron trapped between metal ions, thus forming a single-electron metal-metal bond. Giant exchange interactions between lanthanide ions and the unpaired electron result in single-molecule magnetism of Dy2@C80(CH2Ph) with a record-high 100 s blocking temperature of 18 K. All magnetic moments in Dy2@C80(CH2Ph) are parallel and couple ferromagnetically to form a single spin unit of 21 μB with a dysprosium-electron exchange constant of 32 cm−1. The barrier of the magnetization reversal of 613 K is assigned to the state in which the spin of one Dy centre is flipped., Single molecule magnets have demonstrated promise for information storage, molecular spintronics and quantum computing, but are limited by their low operational temperatures. Here, Popov and coworkers prepare a SMM with a high blocking temperature of 18 K by trapping two lanthanide ions with a single-electron bond inside a fullerene.

For the endohedral fullerene molecule HoLu_{2}N@C_{80}, it is shown that the endohedral HoLu_{2}N unit may be oriented in a magnetic field. The Ho magnetic moment is fixed in the strong ligand field and aligns along the holmium-nitrogen axis. The torque of a magnetic field on the Ho magnetic moment leads to a hopping bias of the endohedral unit inclining to an orientation parallel to the externally applied field. This endohedral cluster distribution remains frozen below the onset of thermally induced rotation of the endohedral units. We derive an analytical statistical model for the description of the effect that scales below 7 T with the square of the external field strength, and that allows us to resolve the freezing temperature of the endohedral hopping motion. The freezing temperature is around 55 K and depends on the cooling rate, which in turn determines an activation energy for the hopping motion of 185 meV and a prefactor of 1.8×10^{14} s^{-1}. For TbSc_{2}N@C_{80} we find the same behavior with a 3.5% higher freezing temperature.

A method for the selective synthesis of sulfide clusterfullerenes Dy2S@C2n is developed. Addition of methane to the reactive atmosphere reduces the formation of empty fullerenes in the arc-discharge synthesis, whereas the use of Dy2S3 as a source of metal and sulfur affords sulfide clusterfullerenes as the main fullerene products along with smaller amounts of carbide clusterfullerenes. Two isomers of Dy2S@C82 with Cs(6) and C3v(8) cage symmetry, Dy2S@C72-Cs(10528), and a carbide clusterfullerene Dy2C2@C82-Cs(6) were isolated. The molecular structure of both Dy2S@C82 isomers was elucidated by single-crystal X-ray diffraction. SQUID magnetometry demonstrates that all of these clusterfullerenes exhibit hysteresis of magnetization, with Dy2S@C82-C3v(8) being the strongest single molecule magnet in the series. DC- and AC-susceptibility measurements were used to determine magnetization relaxation times in the temperature range from 1.6 K to 70 K. Unprecedented magnetization relaxation dynamics with three consequent Orbach processes and energy barriers of 10.5, 48, and 1232 K are determined for Dy2S@C82-C3v(8). Dy2S@C82-Cs(6) exhibits faster relaxation of magnetization with two barriers of 15.2 and 523 K. Ab initio calculations were used to interpret experimental data and compare the Dy-sulfide clusterfullerenes to other Dy-clusterfullerenes. The smallest and largest barriers are ascribed to the exchange/dipolar barrier and relaxation via crystal-field states, respectively, whereas an intermediate energy barrier of 48 K in Dy2S@C82-C3v(8) is assigned to the local phonon mode, corresponding to the librational motion of the Dy2S cluster inside the carbon cage.

In Scanning Tunnelling Microscopy (STM) the electrons are confined within the tunneling region, and this limitation has redirected scientists to alternative microscopy techniques, aimed at extracting the electrons away from the tunneling region. The topografiner - strictly speaking a precursor of STM, originally developed at the National Bureau of Standards - is an example. In this paper we report on the latest improvements of the topografiner technology that allow resolving topographic contrast with a lateral resolution down to 7 A.

We perform scanning tunnelling microscopy (STM) in a regime where primary electrons are field-emitted from the tip and excite secondary electrons out of the target—the scanning field-emission microscopy regime (SFM). In the SFM mode, a secondary-electron contrast as high as 30% is observed when imaging a monoatomic step between a clean W(110)- and an Fe-covered W(110)-terrace. This is a figure of contrast comparable to STM. The apparent width of the monoatomic step attains the 1 nm mark, i.e. it is only marginally worse than the corresponding width observed in STM. The origin of the unexpected strong contrast in SFM is the material dependence of the secondary-electron yield and not the dependence of the transported current on the tip–target distance, typical of STM: accordingly, we expect that a technology combining STM and SFM will highlight complementary aspects of a surface while simultaneously making electrons, selected with nanometre spatial precision, available to a macroscopic environment for further processing., Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 472 (2195), ISSN:1364-5021, ISSN:1471-2946, ISSN:0080-4630, ISSN:0950-1207

Two isomers of metallofullerene Dy2S@C82 with sulfur-bridged Dy ions exhibit broad magnetic hysteresis with sharp steps at sub-Kelvin temperature. Analysis of the level crossing events for different orientations of a magnetic field showed that even in powder samples, the hysteresis steps caused by quantum tunneling of magnetization can provide precise information on the strength of intramolecular Dy⋯Dy inter-actions. A comparison of different methods to determine the energy difference between ferromagnetic and antiferromagnetic states showed that sub-Kelvin hysteresis gives the most robust and reliable values. The ground state in Dy2S@C82 has ferromagnetic coupling of Dy magnetic moments, whereas the state with antiferromagnetic coupling in C s and C 3v cage isomers is 10.7 and 5.1 cm−1 higher, respectively. The value for the C s isomer is among the highest found in metallofullerenes and is considerably larger than that reported in non-fullerene dinuclear molecular magnets. Magnetization relaxation times measured in zero magnetic field at sub-Kelvin temperatures tend to level off near 900 and 3200 s in C s and C 3v isomers. These times correspond to the quantum tunneling relaxation mechanism, in which the whole magnetic moment of the Dy2S@C82 molecule flips at once as a single entity.

Endohedral lanthanide ions packed inside carbon nanotubes (CNTs) in a one-dimensional assembly have been studied with a combination of high resolution transmission electron microscopy (HRTEM), scanning transmission X-ray microscopy (STXM), and X-ray magnetic circular dichroism (XMCD). By correlating HRTEM and STXM images we show that structures down to 30 nm are resolved with chemical contrast and record X-ray absorption spectra from endohedral lanthanide ions embedded in individual nanoscale CNT bundles. XMCD measurements of an Er$_3$N@C$_{80}$ bulk sample and a macroscopic assembly of filled CNTs indicates that the magnetic properties of the endohedral Er3+ ions are unchanged when encapsulated in CNTs. This study demonstrates the feasibility of local magnetic X-ray characterization of low concentrations of lanthanide ions embedded in molecular nanostructures.