Search

Solar pores are intense concentrations of magnetic flux that emerge through the Sun's photosphere. When compared to sunspots, they are much smaller in diameter and hence can be impacted and buffeted by neighbouring granular activity to generate significant magnetohydrodynamic (MHD) wave energy flux within their confines. However, observations of solar pores from ground-based telescope facilities may struggle to capture subtle motions synonymous with higher-order MHD wave signatures due to seeing effects produced in the Earth's atmosphere. Hence, we have exploited timely seeing-free and high-quality observations of four small magnetic pores from the Polarimetric and Helioseismic Imager (PHI) on board the Solar Orbiter spacecraft. Through acquisition of data under stable observing conditions, we have been able to measure the area fluctuations and horizontal displacements of the solar pores. Cross correlations between perturbations in intensity, area, line-of-sight velocity, and magnetic fields, coupled with the first-time application of novel Proper Orthogonal Decomposition (POD) techniques on the boundary oscillations, provide a comprehensive diagnosis of the embedded MHD waves as sausage and kink modes. Additionally, the previously elusive m = 2 fluting mode is identified in the most magnetically isolated of the four pores. An important consideration lies in how the identified wave modes contribute towards the transfer of energy into the upper solar atmosphere. We find that the four pores examined have approximately 56%, 72%, 52%, and 34% of their total wave energy associated with the identified sausage modes, and around 23%, 17%, 39%, and 49% to their kink modes, respectively, while the first pore also has around an 11% contribution linked to the fluting mode. This study marks the first-time identification of concurrent sausage, kink, and fluting MHD wave modes in solar magnetic pores., Comment: Accepted for publication in Astronomy & Astrophysics

Solar irradiance variability has been monitored almost exclusively from the Earth's perspective. {We present a method to combine the unprecedented observations of the photospheric magnetic field and continuum intensity from outside the Sun-Earth line, which is being recorded by the Polarimetric and Helioseismic Imager on board the Solar Orbiter mission (SO/PHI), with solar observations recorded from the Earth's perspective to examine the solar irradiance variability from both perspectives simultaneously.} Taking SO/PHI magnetograms and continuum intensity images from the cruise phase of the Solar Orbiter mission and concurrent observations from the Helioseismic and Magnetic Imager onboard the Solar Dynamics Observatory (SDO/HMI) as input into the SATIRE-S model, we successfully reconstructed the total solar irradiance variability as apparent from both perspectives. In later stages of the SO mission, the orbital plane will tilt in such a way as to bring the spacecraft away from the ecliptic to heliographic latitudes of up to $33^{\circ}$. The current study sets the template for the reconstruction of solar irradiance variability as seen from outside the ecliptic from data that SO/PHI is expected to collect from such positions. {Such a reconstruction will be beneficial to factoring inclination into how the brightness variations of the Sun compare to those of other cool stars, whose rotation axes are randomly inclined.

Extreme ultraviolet (EUV) observations of the quiet solar atmosphere reveal extended regions of weak emission compared to the ambient quiescent corona. The magnetic nature of these coronal features is not well understood. We study the magnetic properties of the weakly emitting extended regions, which we name coronal voids. In particular, we aim to understand whether these voids result from a reduced heat input into the corona or if they are associated with mainly unipolar and possibly open magnetic fields, similar to coronal holes. We defined the coronal voids via an intensity threshold of 75% of the mean quiet-Sun (QS) EUV intensity observed by the high-resolution EUV channel (HRIEUV) of the Extreme Ultraviolet Imager on Solar Orbiter. The line-of-sight magnetograms of the same solar region recorded by the High Resolution Telescope of the Polarimetric and Helioseismic Imager allowed us to compare the photospheric magnetic field beneath the coronal voids with that in other parts of the QS. The coronal voids studied here range in size from a few granules to a few supergranules and on average exhibit a reduced intensity of 67% of the mean value of the entire field of view. The magnetic flux density in the photosphere below the voids is 76% (or more) lower than in the surrounding QS. Specifically, the coronal voids show much weaker or no network structures. The detected flux imbalances fall in the range of imbalances found in QS areas of the same size. Conclusions. We conclude that coronal voids form because of locally reduced heating of the corona due to reduced magnetic flux density in the photosphere. This makes them a distinct class of (dark) structure, different from coronal holes., Comment: 10 pages, 11 figures

The brightness of faculae and network depends on the angle at which they are observed and the magnetic flux density. Close to the limb, assessment of this relationship has until now been hindered by the increasingly lower signal in magnetograms. This preliminary study aims at highlighting the potential of using simultaneous observations from different vantage points to better determine the properties of faculae close to the limb. We use data from the Solar Orbiter/Polarimetric and Helioseismic Imager (SO/PHI), and the Solar Dynamics Observatory/Helioseismic and Magnetic Imager (SDO/HMI), recorded at $\sim60^\circ$ angular separation of their lines of sight at the Sun. We use continuum intensity observed close to the limb by SO/PHI and complement it with the co-observed $B_{\rm LOS}$ from SDO/HMI, originating closer to disc centre (as seen by SDO/HMI), thus avoiding the degradation of the magnetic field signal near the limb. We derived the dependence of facular brightness in the continuum on disc position and magnetic flux density from the combined observations of SO/PHI and SDO/HMI. Compared with a single point of view, we were able to obtain contrast values reaching closer to the limb and to lower field strengths. We find the general dependence of the limb distance at which the contrast is maximum on the flux density to be at large in line with single viewpoint observations, in that the higher the flux density is, the closer the turning point lies to the limb. There is a tendency, however, for the maximum to be reached closer to the limb when determined from two vantage points. We note that due to the preliminary nature of this study, these results must be taken with caution. Our analysis shows that studies involving two viewpoints can significantly improve the detection of faculae near the solar limb and the determination of their brightness contrast relative to the quiet Sun.

Arch-like loop structures filled with million Kelvin hot plasma form the building blocks of the quiet-Sun corona. Both high-resolution observations and magnetoconvection simulations show the ubiquitous presence of magnetic fields on the solar surface on small spatial scales of $\sim$100\,km. However, the question of how exactly these quiet-Sun coronal loops originate from the photosphere and how the magnetic energy from the surface is channeled to heat the overlying atmosphere is a long-standing puzzle. Here we report high-resolution photospheric magnetic field and coronal data acquired during the second science perihelion of Solar Orbiter that reveal a highly dynamic magnetic landscape underlying the observed quiet-Sun corona. We found that coronal loops often connect to surface regions that harbor fleeting weaker, mixed-polarity magnetic field patches structured on small spatial scales, and that coronal disturbances could emerge from these areas. We suggest that weaker magnetic fields with fluxes as low as $10^{15}$\,Mx and/or those that evolve on timescales less than 5\,minutes, are crucial to understand the coronal structuring and dynamics., Comment: Published in The Astrophysical Journal Letters

Spectropolarimetric reconstructions of the photospheric vector magnetic field are intrinsically limited by the 180$^\circ$-ambiguity in the orientation of the transverse component. So far, the removal of such an ambiguity has required assumptions about the properties of the photospheric field, which makes disambiguation methods model-dependent. The basic idea is that the unambiguous line-of-sight component of the field measured from one vantage point will generally have a non-zero projection on the ambiguous transverse component measured by the second telescope, thereby determining the ``true'' orientation of the transverse field. Such an idea was developed and implemented in the Stereoscopic Disambiguation Method (SDM), which was recently tested using numerical simulations. In this work we present a first application of the SDM to data obtained by the High Resolution Telescope (HRT) onboard Solar Orbiter during the March 2022 campaign, when the angle with Earth was 27 degrees. The method is successfully applied to remove the ambiguity in the transverse component of the vector magnetogram solely using observations (from HRT and from the Helioseismic and Magnetic Imager), for the first time. The SDM is proven to provide observation-only disambiguated vector magnetograms that are spatially homogeneous and consistent. A discussion about the sources of error that may limit the accuracy of the method, and of the strategies to remove them in future applications, is also presented., Comment: 32 pages, 12 figures, accepted in A&A on 09/07/2023

The Solar Orbiter mission completed its first remote-sensing observation windows in the spring of 2022. On 2/4/2022, an M-class flare followed by a filament eruption was seen both by the instruments on board the mission and from several observatories in Earth's orbit. The complexity of the observed features is compared with the predictions given by the standard flare model in 3D. We use the observations from a multi-view dataset, which includes EUV imaging to spectroscopy and magnetic field measurements. These data come from IRIS, SDO, Hinode, as well as several instruments on Solar Orbiter. Information given by SDO/HMI and Solar Orbiter PHI/HRT shows that a parasitic polarity emerging underneath the filament is responsible for bringing the flux rope to an unstable state. As the flux rope erupts, Hinode/EIS captures blue-shifted emission in the transition region and coronal lines in the northern leg of the flux rope prior to the flare peak. Solar Orbiter SPICE captures the whole region, complementing the Doppler diagnostics of the filament eruption. Analyses of the formation and evolution of a complex set of flare ribbons and loops show that the parasitic emerging bipole plays an important role in the evolution of the flaring region. While the analysed data are overall consistent with the standard flare model, the present particular magnetic configuration shows that surrounding magnetic activity such as nearby emergence needs to be taken into account to fully understand the processes at work. This filament eruption is the first to be covered from different angles by spectroscopic instruments, and provides an unprecedented diagnostic of the multi-thermal structures present before and during the flare. This dataset of an eruptive event showcases the capabilities of coordinated observations with the Solar Orbiter mission., Comment: Accepted for publication in the Astronomy & Astrophysics special edition "Solar Orbiter First Results (Nominal Mission Phase)" (23/05/2023)

We use wavefront sensing to characterise the image quality of the the High Resolution Telescope (HRT) of the Polarimetric and Helioseismic Imager (SO/PHI) data products during the second remote sensing window of the Solar Orbiter (SO) nominal mission phase. Our ultimate aims are to reconstruct the HRT data by deconvolving with the HRT point spread function (PSF) and to correct for the effects of optical aberrations on the data. We use a pair of focused--defocused images to compute the wavefront error and derive the PSF of HRT by means of a phase diversity (PD) analysis. The wavefront error of HRT depends on the orbital distance of SO to the Sun. At distances $>0.5$\,au, the wavefront error is small, and stems dominantly from the inherent optical properties of HRT. At distances $<0.5$\,au, the thermo-optical effect of the Heat Rejection Entrance Window (HREW) becomes noticeable. We develop an interpolation scheme for the wavefront error that depends on the thermal variation of the HREW with the distance of SO to the Sun. We also introduce a new level of image reconstruction, termed `aberration correction', which is designed to reduce the noise caused by image deconvolution while removing the aberrations caused by the HREW. The computed PSF via phase diversity significantly reduces the degradation caused by the HREW in the near-perihelion HRT data. In addition, the aberration correction increases the noise by a factor of only $1.45$ compared to the factor of $3$ increase that results from the usual PD reconstructions.

Coronal rain is the most dramatic cooling phenomenon of the solar corona and an essential diagnostic tool for the coronal heating properties. A puzzling feature of the solar corona, besides the heating, is its EUV filamentary structure and variability. We aim to identify observable features of the TNE-TI scenario underlying coronal rain at small and large spatial scales, to understand the role it plays in the solar corona. We use EUV datasets at unprecedented spatial resolution of ~240 km from EUI/HRIEUV and SPICE of Solar Orbiter from the spring 2022 perihelion. EUV absorption features produced by coronal rain are detected at scales as small as 260 km. As the rain falls, heating and compression is produced immediately downstream, leading to a small EUV brightening accompanying the fall and producing a "fireball" phenomenon. Just prior to impact, a flash-like EUV brightening downstream of the rain, lasting a few minutes is observed for the fastest events. For the first time, we detect the atmospheric response to the rain's impact on the chromosphere and consists of upward propagating rebound shocks and flows partly reheating the loop. The observed widths of the rain clumps are 500 +- 200 km. They exhibit a broad velocity distribution of 10 - 150 km s^-1, peaking below 50 km s^-1. Coronal strands of similar widths are observed along the same loops co-spatial with cool filamentary structure, which we interpret as the CCTR. Matching with the expected cooling, prior to the rain appearance sequential loop brightenings are detected in gradually cooler lines from corona to chromospheric temperatures. Despite the large rain showers, most cannot be detected in AIA 171 in quadrature, indicating that LOS effects play a major role in coronal rain visibility. Still, AIA 304 and SPICE observations reveal that only a small fraction of the rain can be captured by HRIEUV., Comment: Astronomy & Astrophysics; 32 Pages, 24 Main Figures, Appendix

Earth-side observations of solar p modes can be used to image and monitor magnetic activity on the Sun's far side. Here we use magnetograms of the far side obtained by the Polarimetric and Helioseismic Imager (PHI) onboard Solar Orbiter (SO) to directly assess -- for the first time -- the validity of far-side helioseismic holography. We wish to co-locate the positions of active regions in helioseismic images and magnetograms, and to calibrate the helioseismic measurements in terms of magnetic field strength. We identify three magnetograms on 18 November 2020, 3 October 2021, and 3 February 2022 displaying a total of six active regions on the far side. The first two dates are from SO's cruise phase, the third from the beginning of the nominal operation phase. We compute contemporaneous seismic phase maps for these three dates using helioseismic holography applied to time series of Dopplergrams from the Helioseismic and Magnetic Imager (HMI) on the Solar Dynamics Observatory (SDO). Among the six active regions seen in SO/PHI magnetograms, five active regions are identified on the seismic maps at almost the same positions as on the magnetograms. One region is too weak to be detected above the seismic noise. To calibrate the seismic maps, we fit a linear relationship between the seismic phase shifts and the unsigned line-of-sight magnetic field averaged over the active region areas extracted from the SO/PHI magnetograms. SO/PHI provides the strongest evidence so far that helioseismic imaging provides reliable information about active regions on the far side, including their positions, areas, and mean unsigned magnetic field., Comment: 10 pages, 9 figures

In November 2021, Solar Orbiter started its nominal mission phase. The remote-sensing instruments on board the spacecraft acquired scientific data during three observing windows surrounding the perihelion of the first orbit of this phase. The aim of the analysis is the detection of magnetohydrodynamic (MHD) wave modes in an active region by exploiting the capabilities of spectropolarimetric measurements. The High Resolution Telescope (HRT) of the Polarimetric and Helioseismic Imager (SO/PHI) on board the Solar Orbiter acquired a high-cadence data set of an active region. This is studied in the paper. B-$\omega$ and phase-difference analyses are applied on line-of-sight velocity and circular polarization maps and other averaged quantities. We find that several MHD modes at different frequencies are excited in all analysed structures. The leading sunspot shows a linear dependence of the phase lag on the angle between the magnetic field and the line of sight of the observer in its penumbra. The magnetic pore exhibits global resonances at several frequencies, which are also excited by different wave modes. The SO/PHI measurements clearly confirm the presence of magnetic and velocity oscillations that are compatible with one or more MHD wave modes in pores and a sunspot. Improvements in modelling are still necessary to interpret the relation between the fluctuations of different diagnostics.

In order to make accurate inferences about the solar interior using helioseismology, it is essential to understand all the relevant physical effects on the observations. One effect to understand is the (complex-valued) ratio of the horizontal to vertical displacement of the p- and f-modes at the height at which they are observed. Unfortunately, it is impossible to measure this ratio directly from a single vantage point, and it has been difficult to disentangle observationally from other effects. In this paper we attempt to measure the ratio directly using 7.5 hours of simultaneous observations from the Polarimetric and Helioseismic Imager on board Solar Orbiter and the Helioseismic and Magnetic Imager on board the Solar Dynamics Observatory. While image geometry problems make it difficult to determine the exact ratio, it appears to agree well with that expected from adiabatic oscillations in a standard solar model. On the other hand it does not agree with a commonly used approximation, indicating that this approximation should not be used in helioseismic analyses. In addition, the ratio appears to be real-valued., Comment: Accepted for publication in Astronomy & Astrophysics. 8 pages, 8 figures

The High Resolution Telescope (HRT) of the Polarimetric and Helioseismic Imager on board the Solar Orbiter spacecraft (SO/PHI) and the Helioseismic and Magnetic Imager (HMI) on board the Solar Dynamics Observatory (SDO) both infer the photospheric magnetic field from polarised light images. SO/PHI is the first magnetograph to move out of the Sun--Earth line and will provide unprecedented access to the Sun's poles. This provides excellent opportunities for new research wherein the magnetic field maps from both instruments are used simultaneously. We aim to compare the magnetic field maps from these two instruments and discuss any possible differences between them. We used data from both instruments obtained during Solar Orbiter's inferior conjunction on 7 March 2022. The HRT data were additionally treated for geometric distortion and degraded to the same resolution as HMI. The HMI data were re-projected to correct for the $3^{\circ}$ separation between the two observatories. SO/PHI-HRT and HMI produce remarkably similar line-of-sight magnetograms, with a slope coefficient of $0.97$, an offset below $1$ G, and a Pearson correlation coefficient of $0.97$. However, SO/PHI-HRT infers weaker line-of-sight fields for the strongest fields. As for the vector magnetic field, SO/PHI-HRT was compared to both the $720$-second and $90$-second HMI vector magnetic field: SO/PHI-HRT has a closer alignment with the $90$-second HMI vector. In the weak signal regime ($< 600$ G), SO/PHI-HRT measures stronger and more horizontal fields than HMI, very likely due to the greater noise in the SO/PHI-HRT data. In the strong field regime ($\gtrsim 600$ G), HRT infers lower field strengths but with similar inclinations (a slope of $0.92$) and azimuths (a slope of $1.02$). The slope values are from the comparison with the HMI $90$-second vector., Comment: 10 pages, 5 figures, accepted for publication in A&A; manuscript is a part of Astronomy & Astrophysics special issue: Solar Orbiter First Results (Nominal Mission Phase)

Context. The Extreme Ultraviolet Imager (EUI), onboard Solar Orbiter consists of three telescopes: the two High Resolution Imagers in EUV (HRIEUV) and in Lyman-{\alpha} (HRILya), and the Full Sun Imager (FSI). Solar Orbiter/EUI started its Nominal Mission Phase on 2021 November 27. Aims. EUI images from the largest scales in the extended corona off limb, down to the smallest features at the base of the corona and chromosphere. EUI is therefore a key instrument for the connection science that is at the heart of the Solar Orbiter mission science goals. Methods. The highest resolution on the Sun is achieved when Solar Orbiter passes through the perihelion part of its orbit. On 2022 March 26, Solar Orbiter reached for the first time a distance to the Sun close to 0.3 au. No other coronal EUV imager has been this close to the Sun. Results. We review the EUI data sets obtained during the period 2022 March-April, when Solar Orbiter quickly moved from alignment with the Earth (2022 March 6), to perihelion (2022 March 26), to quadrature with the Earth (2022 March 29). We highlight the first observational results in these unique data sets and we report on the in-flight instrument performance. Conclusions. EUI has obtained the highest resolution images ever of the solar corona in the quiet Sun and polar coronal holes. Several active regions were imaged at unprecedented cadences and sequence durations. We identify in this paper a broad range of features that require deeper studies. Both FSI and HRIEUV operate at design specifications but HRILya suffered from performance issues near perihelion. We conclude emphasising the EUI open data policy and encouraging further detailed analysis of the events highlighted in this paper.

KIC 7955301 is a hierarchical triple system with eclipse timing and depth variations discovered by the Kepler mission. It is composed of a non-eclipsing primary star at the bottom of the red giant branch on a 209-day orbit with a K/G-type main-sequence inner eclipsing binary, orbiting in 15.3 days. This system was noted for the large amplitude of its eclipse timing variations (4 hours), and the clear solar-like oscillations of the red-giant component, including p-modes of degree up to l=3 and mixed l=1 modes. The system is a single-lined spectroscopic triple. We perform a dynamical model by combining the Kepler photometric data, eclipse timing variations, and radial-velocity data obtained at Apache Point (ARCES) and Haute Provence (SOPHIE) observatories. The dynamical mass of the red-giant is determined with a 2% precision at 1.30 (+0.03,-0.02) solar mass. We perform asteroseismic modeling based on the global seismic parameters and on the individual frequencies. Both methods lead to a mass of the red giant that matches the dynamical mass within the uncertainties. Asteroseismology also reveals the rotation rate of the core (15 days), the envelope (150 days), and the inclination (75 deg) of the red giant. Three different approaches lead to an age between 3.3 and 5.8 Gyr, which highlights the difficulty of determining stellar ages despite the exceptional wealth of available information. On short timescales, the inner binary exhibits eclipses with varying depths during a 7.3-year long interval, and no eclipses during the consecutive 11.9 years. This is why Kepler could detect its eclipses, TESS will not, and the future ESA PLATO mission should. Over the long term, the system owes its evolution to the evolution of its individual components. It could end its current smooth evolution by merging by the end of the red giant or the asymptotic giant branch of the primary star., Comment: Accepted in A&A, 25 pages, 17 figures, 7 tables

The ESA/NASA Solar Orbiter space mission has been successfully launched in February 2020. Onboard is the Polarimetric and Helioseismic Imager (SO/PHI), which has two telescopes, a High Resolution Telescope (HRT) and the Full Disc Telescope (FDT). The instrument is designed to infer the photospheric magnetic field and line-of-sight velocity through differential imaging of the polarised light emitted by the Sun. It calculates the full Stokes vector at 6 wavelength positions at the Fe I 617.3 nm absorption line. Due to telemetry constraints, the instrument nominally processes these Stokes profiles onboard, however when telemetry is available, the raw images are downlinked and reduced on ground. Here the architecture of the on-ground pipeline for HRT is presented, which also offers additional corrections not currently available on board the instrument. The pipeline can reduce raw images to the full Stokes vector with a polarimetric sensitivity of $10^{-3}\cdot I_{c}$ or better.

The Extreme Ultraviolet Imager (EUI) on board the Solar Orbiter (SO) spacecraft observed small extreme ultraviolet (EUV) bursts, termed campfires, that have been proposed to be brightenings near the apexes of low-lying loops in the quiet-Sun atmosphere. The underlying magnetic processes driving these campfires are not understood. During the cruise phase of SO and at a distance of 0.523\,AU from the Sun, the Polarimetric and Helioseismic Imager on Solar Orbiter (SO/PHI) observed a quiet-Sun region jointly with SO/EUI, offering the possibility to investigate the surface magnetic field dynamics underlying campfires at a spatial resolution of about 380~km. In 71\% of the 38 isolated events, campfires are confined between bipolar magnetic features, which seem to exhibit signatures of magnetic flux cancellation. The flux cancellation occurs either between the two main footpoints, or between one of the footpoints of the loop housing the campfire and a nearby opposite polarity patch. In one particularly clear-cut case, we detected the emergence of a small-scale magnetic loop in the internetwork followed soon afterwards by a campfire brightening adjacent to the location of the linear polarisation signal in the photosphere, that is to say near where the apex of the emerging loop lays. The rest of the events were observed over small scattered magnetic features, which could not be identified as magnetic footpoints of the campfire hosting loops. The majority of campfires could be driven by magnetic reconnection triggered at the footpoints, similar to the physical processes occurring in the burst-like EUV events discussed in the literature. About a quarter of all analysed campfires, however, are not associated to such magnetic activity in the photosphere, which implies that other heating mechanisms are energising these small-scale EUV brightenings.

The detection of gravity modes is expected to give us unprecedented insights into the inner dynamics of the Sun. Within this framework, predicting their amplitudes is essential to guide future observational strategies and seismic studies. In this work, we predict the amplitude of low-frequency asymptotic gravity modes generated by penetrative convection at the top of the radiative zone. The result is found to depend critically on the time evolution of the plumes inside the generation region. Using a solar model, we compute the GOLF apparent surface radial velocity of low-degree gravity modes in the frequency range $10~\mu H_z\le \nu \le 100~\mu H_z$. In case of a Gaussian plume time evolution, gravity modes turn out to be undetectable because of too small surface amplitudes. This holds true despite a wide range of values considered for the parameters of the model. In the other limiting case of an exponential time evolution, plumes are expected to drive gravity modes in a much more efficient way because of a much higher temporal coupling between the plumes and the modes than in the Gaussian case. Using reasonable values for the plume parameters based on semi-analytical models, the apparent surface velocities in this case turn out to be one order of magnitude smaller than the 22-years GOLF detection threshold and than the previous estimates considering turbulent pressure as the driving mechanism, with a maximum value of $0.05$ cm s${}^{-1}$ for $\ell =1$ and $\nu\approx 100~\mu H_z$. When accounting for uncertainties on the plume parameters, the apparent surface velocities in the most favorable plausible case become comparable to those predicted with turbulent pressure, and the GOLF observation time required for a detection at $ \nu \approx100~\mu H_z$ and $\ell=1$ is reduced to about 50 yrs., Comment: 18 pages, Accepted for publication in A&A

Solar Orbiter is the first space mission observing the solar plasma both in situ and remotely, from a close distance, in and out of the ecliptic. The ultimate goal is to understand how the Sun produces and controls the heliosphere, filling the Solar System and driving the planetary environments. With six remote-sensing and four in-situ instrument suites, the coordination and planning of the operations are essential to address the following four top-level science questions: (1) What drives the solar wind and where does the coronal magnetic field originate? (2) How do solar transients drive heliospheric variability? (3) How do solar eruptions produce energetic particle radiation that fills the heliosphere? (4) How does the solar dynamo work and drive connections between the Sun and the heliosphere? Maximising the mission's science return requires considering the characteristics of each orbit, including the relative position of the spacecraft to Earth (affecting downlink rates), trajectory events (such as gravitational assist manoeuvres), and the phase of the solar activity cycle. Furthermore, since each orbit's science telemetry will be downloaded over the course of the following orbit, science operations must be planned at mission level, rather than at the level of individual orbits. It is important to explore the way in which those science questions are translated into an actual plan of observations that fits into the mission, thus ensuring that no opportunities are missed. First, the overarching goals are broken down into specific, answerable questions along with the required observations and the so-called Science Activity Plan (SAP) is developed to achieve this. The SAP groups objectives that require similar observations into Solar Orbiter Observing Plans (SOOPs), resulting in a strategic, top-level view of the optimal opportunities for science observations during the mission lifetime., Comment: 20 pages, 1 figure, accepted by Astronomy & Astrophysics

The existence of mixed modes in stars is a marker of stellar evolution. Their detection serves for a better determination of stellar age. The goal of this paper is to identify the dipole modes in an automatic manner without human intervention. I use the power spectra obtained by the Kepler mission for the application of the method. I compute asymptotic dipole mode frequencies as a function of coupling factor and dipole period spacing, and other parameters. For each star, I collapse the power in an echelle diagramme aligned onto the monopole and dipole mixed modes. The power at the null frequency is used as a figure of merit. Using a genetic algorithm, I then optimise the figure of merit by adjusting the location of the dipole frequencies in the power spectrum}. Using published frequencies, I compare the asymptotic dipole mode frequencies with published frequencies. I also used published frequencies for deriving coupling factor and dipole period spacing using a non-linear least squares fit. I use Monte-Carlo simulations of the non-linear least square fit for deriving error bars for each parameters. From the 44 subgiants studied, the automatic identification allows to retrieve within 3 $\mu$Hz at least 80\% of the modes for 32 stars, and within 6 $\mu$Hz at least 90% of the modes for 37 stars. The optimised and fitted gravity-mode period spacing and coupling factor agree with previous measurements. Random errors for the mixed-mode parameters deduced from Monte-Carlo simulation are about 30-50 times smaller than previously determined errors, which are in fact systematic errors. The period spacing and coupling factors of mixed modes in subgiants are confirmed. The current automated procedure will need to be improved using a more accurate asymptotic model and/or proper statistical tests., Comment: 18 pages, 20 figures, accepted in Astronomy and Astrophysics, 24 August 2020

The Spectral Imaging of the Coronal Environment (SPICE) instrument is a high-resolution imaging spectrometer operating at extreme ultraviolet (EUV) wavelengths. In this paper, we present the concept, design, and pre-launch performance of this facility instrument on the ESA/NASA Solar Orbiter mission. The goal of this paper is to give prospective users a better understanding of the possible types of observations, the data acquisition, and the sources that contribute to the instrument's signal. The paper discusses the science objectives, with a focus on the SPICE-specific aspects, before presenting the instrument's design, including optical, mechanical, thermal, and electronics aspects. This is followed by a characterisation and calibration of the instrument's performance. The paper concludes with descriptions of the operations concept and data processing. The performance measurements of the various instrument parameters meet the requirements derived from the mission's science objectives. The SPICE instrument is ready to perform measurements that will provide vital contributions to the scientific success of the Solar Orbiter mission., Comment: A&A, accepted 19 August 2019; 26 pages, 25 figures

Linear damping rates and modal frequency corrections of radial oscillation modes in selected LEGACY main-sequence stars are estimated by means of a nonadiabatic stability analysis. The selected stellar sample covers stars observed by Kepler with a large range of surface temperatures and surface gravities. A nonlocal, time-dependent convection model is perturbed to assess stability against pulsation modes. The mixing-length parameter is calibrated to the surface-convection-zone depth of a stellar model obtained from fitting adiabatic frequencies to the LEGACY observations, and two of the nonlocal convection parameters are calibrated to the corresponding LEGACY linewidth measurements. The remaining nonlocal convection parameters in the 1D calculations are calibrated so as to reproduce profiles of turbulent pressure and of the anisotropy of the turbulent velocity field of corresponding 3D hydrodynamical simulations. The atmospheric structure in the 1D stability analysis adopts a temperature-optical-depth relation derived from 3D hydrodynamical simulations. Despite the small number of parameters to adjust, we find good agreement with detailed shapes of both turbulent pressure profiles and anisotropy profiles with depth, and with damping rates as a function of frequency. Furthermore, we find the absolute modal frequency corrections, relative to a standard adiabatic pulsation calculation, to increase with surface temperature and surface gravity., Comment: accepted for publication in Monthly Notices of the Royal Astronomical Society (MNRAS); 15 pages, 8 figures

This paper describes the Polarimetric and Helioseismic Imager on the Solar Orbiter mission (SO/PHI), the first magnetograph and helioseismology instrument to observe the Sun from outside the Sun-Earth line. It is the key instrument meant to address the top-level science question: How does the solar dynamo work and drive connections between the Sun and the heliosphere? SO/PHI will also play an important role in answering the other top-level science questions of Solar Orbiter, as well as hosting the potential of a rich return in further science. SO/PHI measures the Zeeman effect and the Doppler shift in the FeI 617.3nm spectral line. To this end, the instrument carries out narrow-band imaging spectro-polarimetry using a tunable LiNbO_3 Fabry-Perot etalon, while the polarisation modulation is done with liquid crystal variable retarders (LCVRs). The line and the nearby continuum are sampled at six wavelength points and the data are recorded by a 2kx2k CMOS detector. To save valuable telemetry, the raw data are reduced on board, including being inverted under the assumption of a Milne-Eddington atmosphere, although simpler reduction methods are also available on board. SO/PHI is composed of two telescopes; one, the Full Disc Telescope (FDT), covers the full solar disc at all phases of the orbit, while the other, the High Resolution Telescope (HRT), can resolve structures as small as 200km on the Sun at closest perihelion. The high heat load generated through proximity to the Sun is greatly reduced by the multilayer-coated entrance windows to the two telescopes that allow less than 4% of the total sunlight to enter the instrument, most of it in a narrow wavelength band around the chosen spectral line., Comment: 36 pages, 41 figures

The recent claimed detection of g modes was obtained from the analysis of the power spectrum of the time series of round-trip travel time of p modes. The goal of this paper is to reproduce these results on which the claims are based for confirming or invalidating the detection of g modes with the method used to make the claims. We computed the time series of round-trip travel time using the procedure given in Fossat et al. (2017), and used different variations of the times series for comparison. We used the recently calibrated GOLF data (published in Paper I) with different sampling, different photomultipliers, different length of data for reproducing the analysis. We also correlated the power spectrum with an asymptotic model of g-mode frequencies in a similar manner to Fossat and Schmider (2018). We devised a scheme for optimising the correlation both for pure noise and for the GOLF data. We confirm the analysis performed in Fossat et al. (2017) but draw different conclusions. Their claims of detection of g modes cannot be confirmed when changing parameters such as sampling interval, length of time series, or photomultipliers. Other instrument such as GONG and BiSON do not confirm their detection. We also confirm the analysis performed in Fossat and Schmider (2018), but again draw different conclusions. For GOLF, the correlation of the power spectrum with the asymptotic model of g-mode frequencies for $l=1$ and $l=2$ show a high correlation at lag=0 and at lag corresponding to the rotational splitting $\nu_l$, but the same occurs for pure noise due to the large number of peaks present in the model. In addition, other very different parameters defining the asymptotic model also provide a high correlation at these lags. We conclude that the detection performed in Fossat and Schmider (2018) is an artefact of the methodology., Comment: 11 pages, 10 figures, Accepted March 4, 2019

We present the target list of solar-type stars to be observed in short-cadence (2-min) for asteroseismology by the NASA Transiting Exoplanet Survey Satellite (TESS) during its 2-year nominal survey mission. The solar-like Asteroseismic Target List (ATL) is comprised of bright, cool main-sequence and subgiant stars and forms part of the larger target list of the TESS Asteroseismic Science Consortium (TASC). The ATL uses Gaia DR2 and the Extended Hipparcos Compilation (XHIP) to derive fundamental stellar properties, calculate detection probabilities and produce a rank-ordered target list. We provide a detailed description of how the ATL was produced and calculate expected yields for solar-like oscillators based on the nominal photometric performance by TESS. We also provide publicly available source code which can be used to reproduce the ATL, thereby enabling comparisons of asteroseismic results from TESS with predictions from synthetic stellar populations., Comment: 13 pages, 11 figures; accepted for publication in Astrophysical Journal Supplement Series

The recent claims of g-mode detection have restarted the search for these potentially extremely important modes. These claims can be reassessed in view of the different data sets available from the SoHO instruments and ground-based instruments. We produce a new calibration of the GOLF data with a more consistent p-mode amplitude and a more consistent time shift correction compared to the time series used in the past. The calibration of 22 years of GOLF data is done with a simpler approach that uses only the predictive radial velocity of the SoHO spacecraft as a reference. Using p modes, we measure and correct the time shift between ground- and space-based instruments and the GOLF instrument. The p-mode velocity calibration is now consistent to within a few percent with other instruments. The remaining time shifts are within $\pm$ 5 s for 99.8% of the time series. Accepted by A&A on June 29, 2018, Comment: 8 pages, 8 figures

The NASA Kepler space telescope has detected solar-like oscillations in several hundreds of single stars, thereby providing a way to determine precise stellar parameters using asteroseismology. In this work, we aim to derive the fundamental parameters of a close triple star system, HD 188753, for which asteroseismic and astrometric observations allow independent measurements of stellar masses. We used six months of Kepler photometry available for HD 188753 to detect the oscillation envelopes of the two brightest stars. For each star, we extracted the individual mode frequencies by fitting the power spectrum using a maximum likelihood estimation approach. We then derived initial guesses of the stellar masses and ages based on two seismic parameters and on a characteristic frequency ratio, and modelled the two components independently with the stellar evolution code CESTAM. In addition, we derived the masses of the three stars by applying a Bayesian analysis to the position and radial-velocity measurements of the system. Based on stellar modelling, the mean common age of the system is $10.8 \pm 0.2\,$Gyr and the masses of the two seismic components are $M_A =$ $0.99 \pm 0.01\,M_\odot$ and $M_{Ba} =$ $0.86 \pm 0.01\,M_\odot$. From the mass ratio of the close pair, $M_{Bb}/M_{Ba} = 0.767 \pm 0.006$, the mass of the faintest star is $M_{Bb} =$ $0.66 \pm 0.01\,M_\odot$ and the total seismic mass of the system is then $M_{syst} =$ $2.51 \pm 0.02\,M_\odot$. This value agrees perfectly with the total mass derived from our orbital analysis, $M_{syst} =$ $2.51^{+0.20}_{-0.18}\,M_\odot$, and leads to the best current estimate of the parallax for the system, $\pi = 21.9 \pm 0.2\,$mas. In addition, the minimal relative inclination between the inner and outer orbits is $10.9^\circ \pm 1.5^\circ$, implying that the system does not have a coplanar configuration.

Oscillation properties are usually measured by fitting symmetric Lorentzian profiles to the power spectra of Sun-like stars. However the line profiles of solar oscillations have been observed to be asymmetrical for the Sun. The physical origin of this line asymmetry is not fully understood, although it should depend on the depth dependence of the source of wave excitation (convective turbulence) and details of the observable (velocity or intensity). For oscillations of the Sun, it has been shown that neglecting the asymmetry leads to systematic errors in the frequency determination. This could subsequently affects the results of seismic inferences of the solar internal structure. Using light curves from the {\it Kepler} spacecraft we have measured mode asymmetries in 43 stars. We confirm that neglecting the asymmetry leads to systematic errors that can exceed the $1\sigma$ confidence intervals for seismic observations longer than one year. Therefore, the application of an asymmetric Lorentzian profile is to be favoured to improve the accuracy of the internal stellar structure and stellar fundamental parameters. We also show that the asymmetry changes sign between cool Sun-like stars and hotter stars. This provides the best constraints to date on the location of the excitation sources across the Hertzsprung-Russel diagram., Comment: 8 pages, 7 Figures, 1 Table, Accepted to ApJ

The great success of Helioseismology resides in the remarkable progress achieved in the understanding of the structure and dynamics of the solar interior. This success mainly relies on the ability to conceive, implement, and operate specific instrumentation with enough sensitivity to detect and measure small fluctuations (in velocity and/or intensity) on the solar surface that are well below one meter per second or a few parts per million. Furthermore the limitation of the ground observations imposing the day-night cycle (thus a periodic discontinuity in the observations) was overcome with the deployment of ground-based networks --properly placed at different longitudes all over the Earth-- allowing longer and continuous observations of the Sun and consequently increasing their duty cycles. In this chapter, we start by a short historical overview of helioseismology. Then we describe the different techniques used to do helioseismic analyses along with a description of the main instrumental concepts. We in particular focus on the instruments that have been operating long enough to study the solar magnetic activity. Finally, we give a highlight of the main results obtained with such high-duty cycle observations (>80%) lasting over the last few decades., Comment: Chapter 2 of the book Extraterrestrial Seismology, 16 pages, 5 figures; doi:10.1017/CBO9781107300668.005

Deciphering the assembly history of the Milky Way is a formidable task, which becomes possible only if one can produce high-resolution chrono-chemo-kinematical maps of the Galaxy. Data from large-scale astrometric and spectroscopic surveys will soon provide us with a well-defined view of the current chemo-kinematical structure of the Milky Way, but will only enable a blurred view on the temporal sequence that led to the present-day Galaxy. As demonstrated by the (ongoing) exploitation of data from the pioneering photometric missions CoRoT, Kepler, and K2, asteroseismology provides the way forward: solar-like oscillating giants are excellent evolutionary clocks thanks to the availability of seismic constraints on their mass and to the tight age-initial-mass relation they adhere to. In this paper we identify five key outstanding questions relating to the formation and evolution of the Milky Way that will need precise and accurate ages for large samples of stars to be addressed, and we identify the requirements in terms of number of targets and the precision on the stellar properties that are needed to tackle such questions. By quantifying the asteroseismic yields expected from PLATO for red-giant stars, we demonstrate that these requirements are within the capabilities of the current instrument design, provided that observations are sufficiently long to identify the evolutionary state and allow robust and precise determination of acoustic-mode frequencies. This will allow us to harvest data of sufficient quality to reach a 10% precision in age. This is a fundamental pre-requisite to then reach the more ambitious goal of a similar level of accuracy, which will only be possible if we have to hand a careful appraisal of systematic uncertainties on age deriving from our limited understanding of stellar physics, a goal which conveniently falls within the main aims of PLATO's core science., Comment: 17 pages, 9 figures, accepted for publication in Astronomical Notes

Starting in December 2014, Kepler K2 observed Neptune continuously for 49 days at a 1-minute cadence. The goals consisted of studying its atmospheric dynamics (Simon et al. 2016), detecting its global acoustic oscillations (Rowe et al., submitted), and those of the Sun, which we report on here. We present the first indirect detection of solar oscillations in intensity measurements. Beyond the remarkable technical performance, it indicates how Kepler would see a star like the Sun. The result from the global asteroseismic approach, which consists of measuring the oscillation frequency at maximum amplitude "nu_max" and the mean frequency separation between mode overtones "Delta nu", is surprising as the nu_max measured from Neptune photometry is larger than the accepted value. Compared to the usual reference nu_max_sun = 3100 muHz, the asteroseismic scaling relations therefore make the solar mass and radius appear larger by 13.8 +/- 5.8 % and 4.3 +/- 1.9 % respectively. The higher nu_max is caused by a combination of the value of nu_max_sun, being larger at the time of observations than the usual reference from SOHO/VIRGO/SPM data (3160 +/- 10 muHz), and the noise level of the K2 time series, being ten times larger than VIRGO's. The peak-bagging method provides more consistent results: despite a low signal-to-noise ratio (SNR), we model ten overtones for degrees l=0,1,2. We compare the K2 data with simultaneous SOHO/VIRGO/SPM photometry and BiSON velocity measurements. The individual frequencies, widths, and amplitudes mostly match those from VIRGO and BiSON within 1 sigma, except for the few peaks with lowest SNR., Comment: 8 pages, 4 figures, 1 table

Binary star systems are important for understanding stellar structure and evolution, and are especially useful when oscillations can be detected and analysed with asteroseismology. However, only four systems are known in which solar-like oscillations are detected in both components. Here, we analyse the fifth such system, HD 176465, which was observed by Kepler. We carefully analysed the system's power spectrum to measure individual mode frequencies, adapting our methods where necessary to accommodate the fact that both stars oscillate in a similar frequency range. We also modelled the two stars independently by fitting stellar models to the frequencies and complementary parameters. We are able to cleanly separate the oscillation modes in both systems. The stellar models produce compatible ages and initial compositions for the stars, as is expected from their common and contemporaneous origin. Combining the individual ages, the system is about 3.0$\pm$0.5 Gyr old. The two components of HD 176465 are young physically-similar oscillating solar analogues, the first such system to be found, and provide important constraints for stellar evolution and asteroseismology., Comment: Accepted for publication in Astronomy and Astrophysics. 16 pages, 10 figures and 8 tables

New insights on stellar evolution and stellar interiors physics are being made possible by asteroseismology. Throughout the course of the Kepler mission, asteroseismology has also played an important role in the characterization of exoplanet-host stars and their planetary systems. The upcoming NASA Transiting Exoplanet Survey Satellite (TESS) will be performing a near all-sky survey for planets that transit bright nearby stars. In addition, its excellent photometric precision, combined with its fine time sampling and long intervals of uninterrupted observations, will enable asteroseismology of solar-type and red-giant stars. Here we develop a simple test to estimate the detectability of solar-like oscillations in TESS photometry of any given star. Based on an all-sky stellar and planetary synthetic population, we go on to predict the asteroseismic yield of the TESS mission, placing emphasis on the yield of exoplanet-host stars for which we expect to detect solar-like oscillations. This is done for both the target stars (observed at a 2-min cadence) and the full-frame-image stars (observed at a 30-min cadence). A similar exercise is also conducted based on a compilation of known host stars. We predict that TESS will detect solar-like oscillations in a few dozen target hosts (mainly subgiant stars but also in a smaller number of F dwarfs), in up to 200 low-luminosity red-giant hosts, and in over 100 solar-type and red-giant known hosts, thereby leading to a threefold improvement in the asteroseismic yield of exoplanet-host stars when compared to Kepler's., Comment: Accepted for publication in ApJ; 31 pages, 12 figures

$\theta$ Cygni is an F3 spectral-type main-sequence star with visual magnitude V=4.48. This star was the brightest star observed by the original Kepler spacecraft mission. Short-cadence (58.8 s) photometric data using a custom aperture were obtained during Quarter 6 (June-September 2010) and subsequently in Quarters 8 and 12-17. We present analyses of the solar-like oscillations based on Q6 and Q8 data, identifying angular degree $l$ = 0, 1, and 2 oscillations in the range 1000-2700 microHz, with a large frequency separation of 83.9 plus/minus 0.4 microHz, and frequency with maximum amplitude 1829 plus/minus 54 microHz. We also present analyses of new ground-based spectroscopic observations, which, when combined with angular diameter measurements from interferometry and Hipparcos parallax, give T_eff = 6697 plus/minus 78 K, radius 1.49 plus/minus 0.03 solar radii, [Fe/H] = -0.02 plus/minus 0.06 dex, and log g = 4.23 plus/minus 0.03. We calculate stellar models matching the constraints using several methods, including using the Yale Rotating Evolution Code and the Asteroseismic Modeling Portal. The best-fit models have masses 1.35-1.39 solar masses and ages 1.0-1.6 Gyr. theta Cyg's T_eff and log g place it cooler than the red edge of the gamma Doradus instability region established from pre-Kepler ground-based observations, but just at the red edge derived from pulsation modeling. The pulsation models show gamma Dor gravity-mode pulsations driven by the convective-blocking mechanism, with frequencies of 1 to 3 cycles/day (11 to 33 microHz). However, gravity modes were not detected in the Kepler data, one signal at 1.776 cycles/day (20.56 microHz) may be attributable to a faint, possibly background, binary. Asteroseismic studies of theta Cyg and other A-F stars observed by Kepler and CoRoT, will help to improve stellar model physics and to test pulsation driving mechanisms., Comment: Accepted for Publication in The Astrophysical Journal, July 1, 2016

Our poor understanding of the boundaries of convective cores generates large uncertainties on the extent of these cores and thus on stellar ages. Our aim is to use asteroseismology to consistently measure the extent of convective cores in a sample of main-sequence stars whose masses lie around the mass-limit for having a convective core. We first test and validate a seismic diagnostic that was proposed to probe in a model-dependent way the extent of convective cores using the so-called $r_{010}$ ratios, which are built with $l=0$ and $l=1$ modes. We apply this procedure to 24 low-mass stars chosen among Kepler targets to optimize the efficiency of this diagnostic. For this purpose, we compute grids of stellar models with both the CESAM2k and MESA evolution codes, where the extensions of convective cores are modeled either by an instantaneous mixing or as a diffusion process. Among the selected targets, we are able to unambiguously detect convective cores in eight stars and we obtain seismic measurements of the extent of the mixed core in these targets with a good agreement between the CESAM2k and MESA codes. By performing optimizations using the Levenberg-Marquardt algorithm, we then obtain estimates of the amount of extra-mixing beyond the core that is required in CESAM2k to reproduce seismic observations for these eight stars and we show that this can be used to propose a calibration of this quantity. This calibration depends on the prescription chosen for the extra-mixing, but we find that it should be valid also for the code MESA, provided the same prescription is used. This study constitutes a first step towards the calibration of the extension of convective cores in low-mass stars, which will help reduce the uncertainties on the ages of these stars., Comment: 27 pages, 15 figures, accepted in A&A

We present the first detections by the NASA K2 Mission of oscillations in solar-type stars, using short-cadence data collected during K2 Campaign\,1 (C1). We understand the asteroseismic detection thresholds for C1-like levels of photometric performance, and we can detect oscillations in subgiants having dominant oscillation frequencies around $1000\,\rm \mu Hz$. Changes to the operation of the fine-guidance sensors are expected to give significant improvements in the high-frequency performance from C3 onwards. A reduction in the excess high-frequency noise by a factor of two-and-a-half in amplitude would bring main-sequence stars with dominant oscillation frequencies as high as ${\simeq 2500}\,\rm \mu Hz$ into play as potential asteroseismic targets for K2., Comment: Accepted for publication in PASP; 16 pages, 2 figures

The solar analogs 16 Cyg A and 16 Cyg B are excellent asteroseismic targets in the \Kepler field of view and together with a red dwarf and a Jovian planet form an interesting system. For these more evolved Sun-like stars we cannot detect surface rotation with the current \Kepler data but instead use the technique of asteroseimology to determine rotational properties of both 16 Cyg A and B. We find the rotation periods to be $23.8^{+1.5}_{-1.8} \rm \, days$ and $23.2^{+11.5}_{-3.2} \rm \, days$, and the angles of inclination to be $56^{+6}_{-5} \, ^{\circ}$ and $36^{+17}_{-7} \, ^{\circ}$, for A and B respectively. Together with these results we use the published mass and age to suggest that, under the assumption of a solar-like rotation profile, 16 Cyg A could be used when calibrating gyrochronology relations. In addition, we discuss the known 16 Cyg B star-planet eccentricity and measured low obliquity which is consistent with Kozai cycling and tidal theory., Comment: 10 pages accepted for publication in the MNRAS

Solar-like oscillations have been observed by Kepler and CoRoT in many solar-type stars, thereby providing a way to probe the stars using asteroseismology. We provide the mode linewidths and mode heights of the oscillations of various stars as a function of frequency and of effective temperature. We used a time series of nearly two years of data for each star. The 23 stars observed belong to the simple or F-like category. The power spectra of the 23 main-sequence stars were analysed using both maximum likelihood estimators and Bayesian estimators, providing individual mode characteristics such as frequencies, linewidths, and mode heights. We study the source of systematic errors in the mode linewidths and mode heights, and we present a way to correct these errors with respect to a common reference fit. Using the correction, we could explain all sources of systematic errors, which could be reduced to less than $\pm$15% for mode linewidths and heights, and less than $\pm$5% for amplitude, when compared to the reference fit. The effect of a different estimated stellar background and a different estimated splitting will provide frequency-dependent systematic errors that might affect the comparison with theoretical mode linewidth and mode height, therefore affecting the understanding of the physical nature of these parameters. All other sources of relative systematic errors are less dependent upon frequency. We also provide the dependence of the so-called linewidth dip, in the middle of the observed frequency range, as a function of effective temperature. We show that the depth of the dip decreases with increasing effective temperature. The dependence of the dip on effective temperature may imply that the mixing length parameter $\alpha$ or the convective flux may increase with effective temperature., Comment: Accepted by A&A, 38 pages, 35 figures, 26 tables

Context. The object HD 43587Aa is a G0V star observed during the 145-day LRa03 run of the COnvection, ROtation and planetary Transits space mission (CoRoT), for which complementary High Accuracy Radial velocity Planet Searcher (HARPS) spectra with S/N>300 were also obtained. Its visual magnitude is 5.71, and its effective temperature is close to 5950 K. It has a known companion in a highly eccentric orbit and is also coupled with two more distant companions. Aims. We undertake a preliminary investigation of the internal structure of HD 43587Aa. Methods. We carried out a seismic analysis of the star, using maximum likelihood estimators and Markov Chain Monte Carlo methods. Results. We established the first table of the eigenmode frequencies, widths, and heights for HD 43587Aa. The star appears to have a mass and a radius slightly larger than the Sun, and is slightly older (5.6 Gyr). Two scenarios are suggested for the geometry of the star: either its inclination angle is very low, or the rotation velocity of the star is very low. Conclusions. A more detailed study of the rotation and of the magnetic and chromospheric activity for this star is needed, and will be the subject of a further study. New high resolution spectrometric observations should be performed for at least several months in duration.

Asteroseismology may in principle be used to detect unresolved stellar binary systems comprised of solar-type stars and/or red giants. This novel method relies on the detection of the presence of two solar-like oscillation spectra in the frequency spectrum of a single lightcurve. Here, we make predictions of the numbers of systems that may be detectable in data already collected by the NASA Kepler Mission. Our predictions, which are based upon TRILEGAL and BiSEPS simulations of the Kepler field of view, indicate that as many as 200 or more ``asteroseismic binaries'' may be detectable in this manner. Most of these binaries should be comprised of two He-core-burning red giants. Owing largely to the limited numbers of targets with the requisite short-cadence Kepler data, we expect only a small number of detected binaries containing solar-type stars. The predicted yield of detections is sensitive to the assumed initial mass ratio distribution of the binary components and therefore represents a sensitive calibration of the much debated initial mass ratio distribution near mass ratio unity., Comment: 21 pages, 5 figures, ApJ Letters, accepted

Context : We still do not know which mechanisms are responsible for the transport of angular momentum inside stars. The recent detection of mixed modes that contain the signature of rotation in the spectra of Kepler subgiants and red giants gives us the opportunity to make progress on this issue. Aims: Our aim is to probe the radial dependance of the rotation profiles for a sample of Kepler targets. For this purpose, subgiants and early red giants are particularly interesting targets because their rotational splittings are more sensitive to the rotation outside the deeper core than is the case for their more evolved counterparts. Methods: We first extract the rotational splittings and frequencies of the modes for six young Kepler red giants. We then perform a seismic modeling of these stars using the evolutionary codes CESAM2k and ASTEC. By using the observed splittings and the rotational kernels of the optimal models, we perform inversions of the internal rotation profiles of the six stars. Results: We obtain estimates of the mean rotation rate in the core and in the convective envelope of these stars. We show that the rotation contrast between the core and the envelope increases during the subgiant branch. Our results also suggest that the core of subgiants spins up with time, contrary to the RGB stars whose core has been shown to spin down. For two of the stars, we show that a discontinuous rotation profile with a deep discontinuity reproduces the observed splittings significantly better than a smooth rotation profile. Interestingly, the depths that are found most probable for the discontinuities roughly coincide with the location of the H-burning shell, which separates the layers that contract from those that expand. These results will bring observational constraints to the scenarios of angular momentum transport in stars., Comment: Accepted in A&A, 27 pages, 18 figures