Search

One of the most commonly used bonds between two biomolecules is the bond between biotin and streptavidin (SA) or streptavidin homologues (SAHs). A high dissociation constant and the consequent high-temperature stability even allows for its use in nucleic acid detection under polymerase chain reaction (PCR) conditions. There are a number of SAHs available, and for assay design, it is of great interest to determine as to which SAH will perform the best under assay conditions. Although there are numerous single studies on the characterization of SAHs in solution or selected solid phases, there is no systematic study comparing different SAHs for biomolecule-binding, hybridization, and PCR assays on solid phases. We compared streptavidin, core streptavidin, traptavidin, core traptavidin, neutravidin, and monomeric streptavidin on the surface of microbeads (10-15 μm in diameter) and designed multiplex microbead-based experiments and analyzed simultaneously the binding of biotinylated oligonucleotides and the hybridization of oligonucleotides to complementary capture probes. We also bound comparably large DNA origamis to capture probes on the microbead surface. We used a real-time fluorescence microscopy imaging platform, with which it is possible to subject samples to a programmable time and temperature profile and to record binding processes on the microbead surface depending on the time and temperature. With the exception of core traptavidin and monomeric streptavidin, all other SA/SAHs were suitable for our investigations. We found hybridization efficiencies close to 100% for streptavidin, core streptavidin, traptavidin, and neutravidin. These could all be considered equally suitable for hybridization, PCR applications, and melting point analysis. The SA/SAH-biotin bond was temperature-sensitive when the oligonucleotide was mono-biotinylated, with traptavidin being the most stable followed by streptavidin and neutravidin. Mono-biotinylated oligonucleotides can be used in experiments with temperatures up to 70 °C. When oligonucleotides were bis-biotinylated, all SA/SAH-biotin bonds had similar temperature stability under PCR conditions, even if they comprised a streptavidin variant with slower biotin dissociation and increased mechanostability.

The Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2) has spread rapidly and developed the current pandemic and the stressful lifestyle in addition with extreme pressure on people was the consequence of its increasing mortality rate. Since COVID-19 is highly infectious, it is crucial to diagnose the disease timely and initiate preventive measures to control the epidemic. Therefore, the need for accurate detection of this virus has been increased dramatically. Real-Time reverse-transcription Polymerase Chain Reaction (RT-PCR) tests are considered a gold standard to detect SARS-CoV-2 RNA. Besides, the recent pandemic has posed the most serious challenge in PCR applications to date. Although RT-PCR has great accuracy, some factors can reduce the efficiency of this test. Time of testing and type of sample are typical elements that may cause false negative results. Furthermore, false positive cases would be the result of contamination and unoptimized primers. In this paper, the relevant factors creating false positive and false negative results have been investigated in depth to increase the awareness of clinicians.

DNA-based procedures are becoming increasingly common within the analytical laboratory where the polymerase chain reaction (PCR) has become an indispensable technique. Developed in 1985 by Kary B. Mullis, PCR revolutionized the way that deoxyribonucleic acid (DNA) could be copied. Mullis's invention allowed researchers to make millions of copies of a selected DNA region within hours. Today, PCR can take minutes. PCR has widespread analytical applications in the food, environmental, medical and forensic fields. This Technical Brief covers the basics of PCR and some of its variations.

Motivation Polymerase chain reaction (PCR) has been a revolutionary biomedical advancement. However, for PCR to be appropriately used, one must spend a significant amount of effort on PCR primer design. Carefully designed PCR primers not only increase sensitivity and specificity, but also decrease effort spent on experimental optimization. Computer software removes the human element by performing and automating the complex and rigorous calculations required in PCR primer design. Classification and review of the available software options and their capabilities should be a valuable resource for any PCR application. Results This article focuses on currently available free PCR primer design software and their major functions (https://pcrprimerdesign.github.io/). The software are classified according to their PCR applications, such as Sanger sequencing, reverse transcription quantitative PCR, single nucleotide polymorphism detection, splicing variant detection, methylation detection, microsatellite detection, multiplex PCR and targeted next generation sequencing, and conserved/degenerate primers to clone orthologous genes from related species, new gene family members in the same species, or to detect a group of related pathogens. Each software is summarized to provide a technical review of their capabilities and utilities.

Premise Quick and effective DNA extraction from plants for subsequent PCR amplification is sometimes challenging when working across diverse plant taxa that may contain a variety of inhibitory compounds. Time-consuming methods may be needed to overcome these inhibitory effects as well as the effects of various preservation and collection methods to extract DNA from leaf samples. Our objective was to develop a rapid DNA extraction protocol that could be used with diverse plant taxa to produce high-quality DNA suitable for downstream PCR applications. Methods and results We tested the efficacy of acetone in extracting DNA from fresh, frozen, oven-dried, acetone-fixed, and herbarium leaf material of 22 species from 16 woody and herbaceous plant families. An improved simplified DNA extraction protocol was developed using acetone-fixed leaf material. The addition of 1% sodium dodecyl sulfate solution resulted in the optimal extraction from all tissue samples. The DNA resulting from the extraction protocol was readily amplified using real-time PCR assays. Conclusions The protocol described here resulted in the extraction of DNA from recalcitrant plant species that was of sufficient quality and quantity for PCR amplification, as indicated by the low threshold cycle values from real-time assays. This method is simple, fast, and cost-effective, and is a reliable tool for extracting high-quality DNA from plant material containing PCR inhibitors.

Molecular technologies based on PCR have been widely used in many biological analysis fields, especially for genetic analysis and DNA barcoding. In this study, a rapid DNA lysis liquid was formulated without any purification step from fresh and processed meat, suitable for conventional PCR amplification. Three different lysis liquid formulas were designed for selection and further optimization for direct PCR and absorbance spectra; DNA concentration and performance in PCR were used to assess the effect of each formula. The results indicated that the formula containing NaOH, EDTA, SDS, Tween 20, and Tris-HCl achieved the best results, and the optimized formula met the need of practical PCR applications. The protocol provided a rapid lysis buffer for DNA replication from any meat samples. The performance of the final formula resulted in high DNA lysis efficiencies for all the tested meat samples and the PCR amplification efficiencies were similar to isolated DNA template using a commercial kit. The whole process can be completed in 30 min. Therefore, this study provides a simple, alternative, cost-effective fast solution for meat molecular analysis based on DNA.

Recombinase polymerase amplification (RPA) is a highly sensitive and selective isothermal amplification technique, operating at 37–42°C, with minimal sample preparation and capable of amplifying as low as 1–10 DNA target copies in less than 20 min. It has been used to amplify diverse targets, including RNA, miRNA, ssDNA and dsDNA from a wide variety of organisms and samples. An ever increasing number of publications detailing the use of RPA are appearing and amplification has been carried out in solution phase, solid phase as well as in a bridge amplification format. Furthermore, RPA has been successfully integrated with different detection strategies, from end-point lateral flow strips to real-time fluorescent detection amongst others. This review focuses on the different methodologies and advances related to RPA technology, as well as highlighting some of the advantages and drawbacks of the technique., Highlights • RPA principles, advantages and limitations. • Comparison of diverse RPA methods: target, label, amplification and detection strategies. • Expected future trends.

We used an alternative approach, loop-mediated isothermal amplification, to detect Mangalitza component in food products, and it has been compared to an established Recombinase Polymerase Amplification test. The correlation between the assays was significant (P

Point mutations in DNA are useful biomarkers that can provide critical classification of disease for accurate diagnosis and to inform clinical decisions. Conventional approaches to detect point mutations are usually based on technologies such as real-time polymerase chain reaction (PCR) or DNA sequencing, which are typically slow and require expensive lab-based equipment. While rapid isothermal strategies such as recombinase polymerase amplification (RPA) have been proposed, they tend to suffer from poor specificity in discriminating point mutations. Herein, we describe a novel strategy that enabled exquisite point mutation discrimination with isothermal DNA amplification, using mismatched primers in conjunction with a two-round enrichment process. As a proof of concept, the method was applied to the rapid and specific identification of drug-resistant Mycobacterium tuberculosis using RPA under specific conditions. The assay requires just picogram levels of genomic DNA input, is sensitive and specific enough to detect 10% point mutation loading, and can discriminate between closely related mutant variants within 30 min. The assay was subsequently adapted onto a low-cost 3D-printed isothermal device with real-time analysis capabilities to demonstrate a potential point-of-care application. Finally, the generic applicability of the strategy was shown by detecting three other clinically important cancer-associated point mutations. We believe that our assay shows potential in a broad range of healthcare screening processes for detecting and categorizing disease phenotypes at the point of care, thus reducing unnecessary therapy and cost in these contexts.

Viral enteric disease imposes a considerable public health and economic burden globally in both humans and livestock. Because enteric viruses are highly transmissible and resistant to numerous control strategies, making early in-field or point-of-care detection is important. There are problems with ligand-based detection strategies (e.g., sensitivity, false positive/negatives) for virus detection. Traditional amplification-based strategies are sensitive, but not as portable or rapid. Recombinase polymerase amplification is a new isothermal technique that utilizes bacterial genome repair enzymes to rapidly amplify target sequences. This report reviews the use of recombinase polymerase amplification for virus detection, showing that the method has favorable fundamental properties supporting its promise for rapid point-of-care detection of enteric viruses.

The measurement of functional gene abundance in diverse microbial communities often employs quantitative PCR (qPCR) with highly degenerate oligonucleotide primers. While degenerate PCR primers have been demonstrated to cause template-specific bias in PCR applications, the effect of such bias on qPCR has been less well explored. We used a set of diverse, full-length nifH gene standards to test the performance of several universal nifH primer sets in qPCR. We found significant template-specific bias in all but the PolF/PolR primer set. Template-specific bias caused more than 1000-fold mis-estimation of nifH gene copy number for three of the primer sets and one primer set resulted in more than 10,000-fold mis-estimation. Furthermore, such template-specific bias will cause qPCR estimates to vary in response to beta-diversity, thereby causing mis-estimation of changes in gene copy number. A reduction in bias was achieved by increasing the primer concentration. We conclude that degenerate primers should be evaluated across a range of templates, annealing temperatures, and primer concentrations to evaluate the potential for template-specific bias prior to their use in qPCR.

Rolling circle amplification (RCA) is an isothermal amplification technique with high efficiency and perfect accuracy for nucleic acids detection. However, RCA technique suffers the limitation to detect short DNA or RNA molecules. For long nucleic acid molecules, enzymatic restriction as well as heat denaturation process is usually required, which makes the amplification not effective and strictly isothermal. In this article, a simple and efficient one-pot self-primed isothermal amplification (SIA) was developed for detection of genomic DNA directly based on the combination of nicking endonuclease assisted strand displacement amplification (SDA) and exponential RCA. In virtue of numerous nicking sites on the genome, a pre-amplification of the whole genome was performed through SDA with the specific cleaving of nicking endonuclease. Meanwhile, the single strand DNA with HPV target sequence generated from SDA could hybrid with the circle probe as a primer and trigger the exponential RCA as a result of the existence of nicking endonuclease. As the reaction temperature and enzyme were the same, the amplification could be operated in one pot. The reaction solution after amplification was added on the electrode for hybridization with the sulfydryl probe to achieve the electrochemical signal. Based on the isothermal amplification, genotyping of HPV 11, 16, 18 and the detection of HPV 18 in Hela cell line were attempted with satisfied results. This approach should be a promising tool for pathogene detection in clinical diagnostics and research.

[EN] The costs of current genotyping methods limit their application to personalized therapy. The authors describe an alternative approach for the detection of single-point-polymorphisms using recombinant polymerase amplification as an allele-specific technique. The use of short and chemically modified primers and locked nucleic acids allowed for a selective isothermal amplification of wild-type or mutant variants at 37 °C within 40 min. An amplification chip platform containing 100 wells was manufactured with a 3D printer and using thermoplastic polylactic acid. The platform reduces reagent consumption and allows parallelization. As a proof of concept, the method was applied to the genotyping of four SNPs that are related to the treatment of tobacco addiction. The target polymorphisms included rs4680 (COMT gene), rs1799971 (OPRM1 gene), rs1800497 (ANKK1 gene), and rs16969968 (CHRNA5 gene). The genotype populations can be well discriminated., The authors acknowledge the financial support received from the Generalitat Valenciana (GVA-PROMETEOII/2014/040 project and GRISOLIA/2014/024 PhD grant) and the Spanish Ministry of Economy and Competitiveness (MINECO CTQ2013-45875-R project).

DNA analysis of biological specimens containing degraded nucleic acids such as mortal remains, archaeological artefacts, forensic samples etc. has gained more attention in recent years. DNA extracted from these samples is often inapplicable for conventional polymerase chain reaction (PCR), so for its amplification the nearby primers are commonly used. Here we report the data that clarify the features of PCR with nearby and abutting primers. We have shown that the proximity of primers leads to significant reduction of the reaction time and ensures the successful performance of DNA amplification even in the presence of PCR inhibitors. The PCR with abutting primers is usually characterized by the absence of nonspecific amplification products that causes extreme sensitivity with limit of detection on single copy level. The feasibility of PCR with abutting primers was demonstrated on species identification of 100 years old rotten wood.

Polymerase Chain Reaction (PCR) is a critical tool for biological research investigators but recently it also has been making a significant impact in clinical, veterinary and agricultural applications. Plasmonic PCR, which employs the very efficient heat transfer of optically irradiated metallic nanoparticles, is a simple and powerful methodology to drive PCR reactions. The scalability of next generation plasmonic PCR technology will introduce various forms of PCR applications ranging from small footprint portable point of care diagnostic devices to large footprint central laboratory multiplexing devices. In a significant advance, we have introduced a real time plasmonic PCR and explored the ability of ultra-fast cycling compatible with both label-free and fluorescence-based monitoring of amplicon production. Furthermore, plasmonic PCR has been substantially optimized to now deliver a 30 cycle PCR in 54 seconds, with a detectable product. The advances described here will have an immediate impact on the further development of the use of plasmonic PCR playing a critical role in rapid point of care diagnostics.

Classical analytical biotechnology typically requires hundreds of thousands of molecules as substrates for analysis. In the case of the deoxyribonucleic acid (DNA), the in vivo molecular cloning has been used to generate virtually unlimited number of molecules for downstream processing. Yet, that is usually a labor-intensive task. These limitations can be overcome with in vitro amplification strategies, which are in fact cloning approaches from the functional (amplification) point of view. The keystone of these methodologies is the exponential amplification of DNA, allowing to generate millions of molecules from a single molecule, in just a few minutes. The polymerase chain reaction (PCR) is the most popular in vitro nucleic-acid amplification methodology. In fact, it can be said that the PCR has represented an inflexion point in science and technology, changing the way biotechnology is done by anyone working with organic entities (viroids, virusoids, prokaryotes and eukaryotes), parts of them or derived products, both current and ancient ones. To carry out optimized PCR amplifications, some mathematics, thermodynamics and bioinformatics should be taken into account. The human factor is also needed most of the times if optimal PCR performance is required. That is why the PCR design process is indeed an art, where the manual optimization of the researcher may make the difference and determine the success of a PCR amplification experiment. This chapter reviews the relevance of PCR in biotechnology from a methodological and applied point of view, highlighting the optimization process, as well as the troubleshooting of the technology, which has a significant impact in the biomedical sciences.

A polymerase chain reaction (PCR) using a thermostable DNA polymerase is the most widely applied method in many areas of research, including life sciences, biotechnology, and medical sciences. However, a conventional PCR incurs an amplification of undesired genes mainly owing to non-specifically annealed primers and the formation of a primer-dimer complex. Herein, we present the development of a Taq DNA polymerase-specific repebody, which is a small-sized protein binder composed of leucine rich repeat (LRR) modules, as a thermolabile inhibitor for a precise and accurate gene amplification by PCR. We selected a repebody that specifically binds to the DNA polymerase through a phage display, and increased its affinity to up to 10 nM through a modular evolution approach. The repebody was shown to effectively inhibit DNA polymerase activity at low temperature and undergo thermal denaturation at high temperature, leading to a rapid and full recovery of the polymerase activity, during the initial denaturation step of the PCR. The performance and utility of the repebody was demonstrated through an accurate and efficient amplification of a target gene without nonspecific gene products in both conventional and real-time PCRs. The repebody is expected to be effectively utilized as a thermolabile inhibitor in a PCR. Biotechnol. Bioeng. 2016;113: 2544-2552. © 2016 Wiley Periodicals, Inc.

On-site quantitative analyses of microorganisms (including viruses) by the polymerase chain reaction (PCR) system are significantly influencing medical and biological research. We have developed a remarkably rapid and portable real-time PCR system that is based on microfluidic approaches. Real-time PCR using TaqMan probes consists of a complex reaction. Therefore, in a rapid real-time PCR, the optimum DNA polymerase must be estimated by using actual real-time PCR conditions. In this study, we compared the performance of three DNA polymerases in actual PCR conditions using our rapid real-time PCR system. Although KAPA2G Fast HS DNA Polymerase has the highest enzymatic activity among them, SpeedSTAR HS DNA Polymerase exhibited better performance to rapidly increase the fluorescence signal in an actual real-time PCR using TaqMan probes. Furthermore, we achieved rapid detection of Escherichia coli in 7 min by using SpeedSTAR HS DNA Polymerase with the same sensitivity as that of a conventional thermal cycler.

A multiplex PCR assay consisting of 13 Rapidly Mutating Y STR loci called RM-Yplex was previously developed. Platinum® Taq DNA polymerase was used to amplify the 13 Y STR loci in a single reaction at an amplification time of approximately 2.5 h. In order to shorten the process with reliable results, two DNA polymerases were tested with the multiplex. Phusion® Flash High Fidelity, TAKARA Z-taqTM , and Platinum® Taq DNA polymerases were investigated for conducting RM-Yplex assay at various PCR cycling conditions. Rapid, robust, and efficient amplification of all the markers within the multiplex were achieved. The amplification time was reduced from 2.5 h to less than 28 min with Phusion® Flash High Fidelity DNA polymerase using Veriti® PCR thermal cycler.

Methods for the early and sensitive detection of pathogenic bacteria suited to low-resource settings could impact diagnosis and management of diseases. Helicase-dependent isothermal amplification (HDA) is an ideal tool for this purpose, especially when combined with a sequence-specific detection method able to improve the selectivity of the assay. The implementation of this approach requires that its analytical performance is shown to be comparable with the gold standard method, polymerase chain reaction (PCR). In this study, we optimize and compare the asymmetric amplification of an 84-base-long DNA sequence specific for Mycobacterium tuberculosis by PCR and HDA, using an electrochemical genomagnetic assay for hybridization-based detection of the obtained single-stranded amplicons. The results indicate the generalizability of the magnetic platform with electrochemical detection for quantifying amplification products without previous purification. Moreover, we demonstrate that under optimal conditions the same gene can be amplified by either PCR or HDA, allowing the detection of as low as 30 copies of the target gene sequence with acceptable reproducibility. Both assays have been applied to the detection of M. tuberculosis in sputum, urine, and pleural fluid samples with comparable results. Simplicity and isothermal nature of HDA offer great potential for the development of point-of-care devices. Graphical Abstract Comparative evaluation of isothermal helicase-dependent amplification and PCR for electrochemical detection of Mycobacterium tuberculosis.

This work describes a proof-of-concept multiplex recombinase polymerase amplification (RPA) assay with lateral flow readout that is capable of simultaneously detecting and differentiating DNA from any of the diarrhea-causing protozoa Giardia, Cryptosporidium, and Entamoeba. Together, these parasites contribute significantly to the global burden of diarrheal illness. Differential diagnosis of these parasites is traditionally accomplished via stool microscopy. However, microscopy is insensitive and can miss up to half of all cases. DNA-based diagnostics such as polymerase chain reaction (PCR) are far more sensitive; however, they rely on expensive thermal cycling equipment, limiting their availability to centralized reference laboratories. Isothermal DNA amplification platforms, such as the RPA platform used in this study, alleviate the need for thermal cycling equipment and have the potential to broaden access to more sensitive diagnostics. Until now, multiplex RPA assays have not been developed that are capable of simultaneously detecting and differentiating infections caused by different pathogens. We developed a multiplex RPA assay to detect the presence of DNA from Giardia, Cryptosporidium, and Entamoeba. The multiplex assay was characterized using synthetic DNA, where the limits-of-detection were calculated to be 403, 425, and 368 gene copies per reaction of the synthetic Giardia, Cryptosporidium, and Entamoeba targets, respectively (roughly 1.5 orders of magnitude higher than for the same targets in a singleplex RPA assay). The multiplex assay was also characterized using DNA extracted from live parasites spiked into stool samples where the limits-of-detection were calculated to be 444, 6, and 9 parasites per reaction for Giardia, Cryptosporidium, and Entamoeba parasites, respectively. This proof-of-concept assay may be reconfigured to detect a wide variety of targets by re-designing the primer and probe sequences.

It is compulsory for many crop plants to be tested for genetic modifications when entering the European Union. In this regard, a DNA extraction is performed and later a qualitative or quantitative PCR to detect and quantify any artificial inserts into the genome. Unfortunately, PCR needs specialized equipment and skilled personnel. This disadvantage has been solved by using isothermal DNA amplification methods, which are as sensitive as the PCR itself and can be performed at constant temperatures and therefore PCR thermocyclers are not needed. Nonetheless, those methods require high quality DNA and the isolation of it is still considered to be an elaborate process. Conventional DNA extraction methods are highly time consuming and tedious. In addition, they cannot be performed on-site as a centrifuge is always required. With this work, the development of a rapid method for DNA extraction from maize was carried out to overcome these problems. The method is based on the employ of an aqueous buffer system in combination with a proteinase K digestion and followed by a later filtration over a polypropylene membrane. Detection was carried out by helicase dependent amplification, as an alternative to PCR for the detection of transgenic maize. Data obtained are similar to those achieved with the more complex standard CTAB extraction method or the Promega Wizard DNA purification kit. The proposed DNA extraction method can be performed on-site, is inexpensive, simple and time saving.

Polymerase chain reaction (PCR), is a simple, effective and widely used enzymatic technic especially in the field of molecular biology which provides the opportunity to amplify a specific DNA fragment from DNA complex pool. Several PCR techniques such as realtime PCR, quantitative and qualitative PCR, Reverse Transcriptase PCR, Nested PCR and multiplex PCR have been developed since the first invention of PCR. Due to the various difficulties of the PCR techniques developed so far, widening the application fields and finding out more advanced level of PCR techniques have become the first priority of the researchers. Digital PCR (dPCR) technology has been developed as a new method to permit the evaluation of the small changes in the copy number variations of the rare mutations, differences between the gene expression changes or state of methylation. Digital PCR is a PCR based new technique for the sensitive measurement of number of DNA copies, it provides opportunity to do large number of PCR with a few number of sample dilution and it has so many small compartments where seperate PCRs are executed in each. At the same time, dPCR leaves some of the quantitative methods behind with the performance of determining the quantity of small amount of genetic material within seconds. This method shows high OZET Polimeraz zincir reaksiyonu (PZR), DNA kompleks

Bias and background issues make efficient amplification of complex template mixes such as aptamer and genomic DNA libraries via conventional PCR methods difficult; emulsion PCR is being increasingly used in such scenarios to circumvent these problems. However, before products generated via emulsion PCR can be used in downstream workflows, they need to be recovered from the water-in-oil emulsion. Often, emulsions are broken following amplification using volatile organic solvents, and product is subsequently isolated via precipitation. Unfortunately, the use of such solvents requires the implementation of special environmental controls, and the yield and purity of DNA isolated by precipitation can be highly variable. Here, we describe the optimization of a simple protocol which can be used to recover products following emulsion PCR using a 2-butanol extraction and subsequent DNA isolation via a commercially available clean-up kit. This protocol avoids the use of volatile solvents and precipitation steps, and we demonstrate that it can be used to reliably recover DNA from water-in-oil emulsions with efficiencies as high as 90%. Furthermore, we illustrate the practical applicability of this protocol by demonstrating how it can be implemented to recover a complex random aptamer library following amplification via emulsion PCR.

The polymerase chain reaction (PCR) is a sought-after nucleic acid amplification technique used in the detection of several diseases. However, one of the main limitations of this and other nucleic acid amplification assays is the complexity, size, maintenance, and cost of their operational instrumentation. This limits the use of PCR applications in settings that cannot afford the instruments but that may have access to basic electrical, electronic, and optical components and the expertise to build them. To provide a more accessible platform, we developed a low-cost, palm-size, and portable instrument to perform real-time PCR (qPCR). The thermocycler leverages a copper-sheathed power resistor and a computer fan, in tandem with basic electronic components controlled from a single-board computer. The instrument incorporates a 3D-printed chassis and a custom-made fluorescence optical setup based on a CMOS camera and a blue LED. Results are displayed in real-time on a tablet. We also fabricated simple acrylic microdevices consisting of four wells (2 μL in volume each) where PCR reactions take place. To test our instrument, we performed qPCR on a series of cDNA dilutions spanning 4 orders of magnitude, achieving similar limits of detection as those achieved by a benchtop thermocycler. We envision our instrument being utilized to enable routine monitoring and diagnosis of certain diseases in low-resource areas.

DNA amplification is required for most molecular diagnostic applications, but conventional polymerase chain reaction (PCR) has disadvantages for field testing. Isothermal amplification techniques are being developed to respond to this problem. One of them is the recombinase polymerase amplification (RPA) that operates at isothermal conditions without sacrificing specificity and sensitivity in easy-to-use formats. In this work, RPA was used for the optical detection of solid-phase amplification of the potential biowarfare agent Yersinia pestis. Thiolated forward primers were immobilized on the surface of maleimide-activated microtitre plates for the quantitative detection of synthetic and genomic DNA, with elongation occurring only in the presence of the specific template DNA and solution phase reverse primers. Quantitative detection was achieved via the use of biotinylated reverse primers and post-amplification addition of streptavidin-HRP conjugate. The overall time of amplification and detection was less than 1 h at a constant temperature of 37 °C. Single-stranded DNA (ssDNA) and double-stranded DNA (dsDNA) sequences were detected, achieving detection limits of 4.04*10(-13) and 3.14*10(-16) M, respectively. The system demonstrated high specificity with negligible responses to non-specific targets.

Isothermal molecular diagnostics are bridging the technology gap between traditional diagnostics and polymerase chain reaction-based methods. These new techniques enable timely and accurate testing, especially in settings where there is a lack of infrastructure to support polymerase chain reaction facilities. Despite this, there is a significant lack of uptake of these technologies in developing countries where they are highly needed. Among these novel isothermal technologies, recombinase polymerase amplification (RPA) holds particular potential for use in developing countries. This rapid nucleic acid amplification approach is fast, highly sensitive and specific, and amenable to countries with a high burden of infectious diseases. Implementation of RPA technology in developing countries is critically required to assess limitations and potentials of the diagnosis of infectious disease, and may help identify impediments that prevent adoption of new molecular technologies in low resource- and low skill settings. This review focuses on approaching diagnosis of infectious disease with RPA.

RNA extraction and purification is a fundamental step that allows for highly sensitive amplification of specific RNA targets in PCR applications. However, commercial extraction kits that are broadly used because of their robustness and high yield of purified RNA are expensive and labor-intensive. In this study, boiling in distilled water or a commercial lysis buffer of different sample matrices containing avian or porcine influenza viruses was tested as an alternative. Real-time PCR (RTqPCR) for nucleoprotein gene fragment was used as read out. Results were compared with freshly extracted RNA by use of a commercial extraction kit. Different batches of virus containing materials, including diluted virus positive allantoic fluid or cell culture supernatant, and avian faecal, cloacal or oropharyngeal swab samples were used in this study. Simple boiling of samples without any additional purification steps can be used as an alternative RNA preparation method to detect influenza A virus nucleoprotein RNA in oropharyngeal swab samples, allantoic fluid or cell-culture supernatant. The boiling method is not applicable for sample matrices containing faecal material.

Nucleic acid amplification is an essential process in biological systems. The in vitro adoption of this process has resulted in powerful techniques that underpin modern molecular biology. The most common tool is polymerase chain reaction (PCR). However, the requirement for a thermal cycler has somewhat limited applications of this classic nucleic acid amplification technique. Isothermal amplification, on the other hand, obviates the use of a thermal cycler because reactions occur at a single temperature. Isothermal amplification methods are diverse, but all have been developed from an understanding of natural nucleic acid amplification processes. Here we review current isothermal amplification methods as classified by their enzymatic mechanisms. We compare their advantages, disadvantages, efficiencies, and applications. Finally, we mention some new developments associated with this technology, and consider future possibilities in molecular engineering and recombinant technologies that may develop from an appreciation of the molecular biology of natural systems.

The most popular in vitro nucleic acid amplification techniques like polymerase chain reaction (PCR) including real-time PCR are costly and require thermocycling, rendering them unsuitable for uses at point-of-care. Highly efficient in vitro nucleic acid amplification techniques using simple, portable and low-cost instruments are crucial in disease diagnosis, mutation detection and biodefense. Toward this goal, isothermal amplification techniques that represent a group of attractive in vitro nucleic acid amplification techniques for bioanalysis have been developed. Unlike PCR where polymerases are easily deactivated by thermally labile constituents in a sample, some of the isothermal nucleic acid amplification techniques, such as helicase-dependent amplification and nucleic acid sequence-based amplification, enable the detection of bioanalytes with much simplified protocols and with minimal sample preparations since the entire amplification processes are performed isothermally. This review focuses on the isothermal nucleic acid amplification techniques and their applications in bioanalytical chemistry. Starting off from their amplification mechanisms and significant properties, the adoption of isothermal amplification techniques in bioanalytical chemistry and their future perspectives are discussed. Representative examples illustrating the performance and advantages of each isothermal amplification technique are discussed along with some discussion on the advantages and disadvantages of each technique.

Success in molecular biology techniques involving hybridization such as PCR and non-PCR-based techniques depends on annealing temperature prediction which derived itself from the melting temperature (T m ) of primers with a minimal error probability. Such calculation should be derived from the comparison of existing methods in a large benchmark set of sequences, as it was the case in this study. In the present study 22 primer design tools were compared based on the deviation of the predicted T m values of 158 primers using software versus the experimentally determined T m values. A paired t-test (False discovery rate (FDR) corrected P-values) and mean square deviation (MSD) were applied to assess all software packages. A significant variation was observed for the T m values of primers calculated by different tools in comparison with optimal experimental condition, which could end up causing wide error in amplification reactions. Based on FDR and MSD criteria, Primer3 Plus and Primer-BLAST performed the best prediction of T m . We practically aimed to provide an easy, safe and robust application of the current available T m predictor tools for all researchers especially for premiers to help them increase their success in different PCR and real-time PCR applications.

Whole-genome amplification (WGA) techniques are used for non-specific amplification of low-copy number DNA, and especially for single-cell genome and transcriptome amplification. There are a number of WGA methods that have been developed over the years. One example is degenerate oligonucleotide-primed PCR (DOP-PCR), which is a very simple, fast and inexpensive WGA technique. Although DOP-PCR has been regarded as one of the pioneering methods for WGA, it only provides low genome coverage and a high allele dropout rate when compared to more modern techniques. Here we describe an improved DOP-PCR (iDOP-PCR). We have modified the classic DOP-PCR by using a new thermostable DNA polymerase (SD polymerase) with a strong strand-displacement activity and by adjustments in primers design. We compared iDOP-PCR, classic DOP-PCR and the well-established PicoPlex technique for whole genome amplification of both high- and low-copy number human genomic DNA. The amplified DNA libraries were evaluated by analysis of short tandem repeat genotypes and NGS data. In summary, iDOP-PCR provided a better quality of the amplified DNA libraries compared to the other WGA methods tested, especially when low amounts of genomic DNA were used as an input material.

Isothermal amplification methods for detection of DNA and RNA targets have expanded significantly in recent years, promising a new wave of simple and rapid molecular diagnostics. Current isothermal methods result in the generation of short fragments (

The growing demand for cost-effective nucleic acid detection assays leads to an increasing number of different isothermal amplification reaction methods. However, all of the most efficient methods suffer from highly complex assay conditions due to the use of complicated primer sets and/or auxiliary enzymes. The present study describes the application of a new linker moiety that can be incorporated between a primer and a secondary target binding site which can act both as a block to polymerase extension as well as a hinge for refolding. This novel “hinge-primer” approach results in an efficient regeneration of the primer binding site and thus improves the strand-displacement and amplification process under isothermal conditions. Our investigations revealed that the reaction with forward and reverse hinge-primer including an abasic site is very efficient. The assay complexity can be reduced by combining the hinge-primer with a corresponding linear primer. Furthermore, the reaction speed can be increased by reducing the length of the amplified target sequence. We tested the sensitivity down to 104 copies and found a linear correlation between reaction time and input copy number. Our approach overcomes the usually cumbersome primer-design and extends the range of isothermal amplification methods using a polymerase with strand-displacement activity.

Taking into account the limits of current genotyping methodologies, we have established a versatile direct PCR method on intact microtissue samples without prior DNA isolation. A simple and standard protocol was developed and validated on a wide range of living organisms including bacterial and fungal strains, plant species and human samples. This allows reliable amplification of target genomic DNA fragment directly from source material using minimal amount of tissue which makes DNA purification irrelevant for a number of biological applications. The direct PCR technique established here represents an excellent alternative to traditional amplification methods used for real-time detection. Since this approach was efficiently and universally applied for high-throughput molecular screening, its implementation will offer new insights for several investigations in human health, biomedical diagnosis, plant biotechnology, as well as in applied environmental and food microbiology.

Researchers have gained a deeper understanding of DNA-based encryption and its effectiveness in enhancing information security in recent years. However, there are many theoretical and technical issues about DNA-based encryption that need to be addressed before it can be effectively used in the field of security. Currently, the most popular DNA-based encryption schemes are based on traditional cryptography and the integration of existing DNA technology. These schemes are not completely based on DNA computing and biotechnology. Herein, as inspired by nature, encryption based on DNA has been developed, which is, in turn, based on two fundamental biological axioms about DNA sequencing: 1) DNA sequencing is difficult under the conditions of not knowing the correct sequencing primers and probes, and 2) without knowing the correct probe, it is difficult to decipher precisely and sequence the information of unknown and mixed DNA/peptide nucleic acid (PNA) probes, which only differ in nucleotide sequence, arranged on DNA chips (microarrays). In essence, when creating DNA-based encryption by means of biological technologies, such as DNA chips and polymerase chain reaction (PCR) amplification, the encryption method discussed herein cannot be decrypted, unless the DNA/PNA probe or PCR amplification is known. The biological analysis, mathematical analysis, and simulation results demonstrate the feasibility of the method, which provides much stronger security and reliability than that of traditional encryption methods.

This chapter introduces the FastPCR software as an integrated tool environment for PCR primer and probe design, which predicts properties of oligonucleotides based on experimental studies of the PCR efficiency. The software provides comprehensive facilities for designing primers for most PCR applications and their combinations. These include the standard PCR as well as the multiplex, long-distance, inverse, real-time, group-specific, unique, overlap extension PCR for multi-fragments assembling cloning and loop-mediated isothermal amplification (LAMP). It also contains a built-in program to design oligonucleotide sets both for long sequence assembly by ligase chain reaction and for design of amplicons that tile across a region(s) of interest. The software calculates the melting temperature for the standard and degenerate oligonucleotides including locked nucleic acid (LNA) and other modifications. It also provides analyses for a set of primers with the prediction of oligonucleotide properties, dimer and G/C-quadruplex detection, linguistic complexity as well as a primer dilution and resuspension calculator. The program consists of various bioinformatical tools for analysis of sequences with the GC or AT skew, CG% and GA% content, and the purine–pyrimidine skew. It also analyzes the linguistic sequence complexity and performs generation of random DNA sequence as well as restriction endonucleases analysis. The program allows to find or create restriction enzyme recognition sites for coding sequences and supports the clustering of sequences. It performs efficient and complete detection of various repeat types with visual display. The FastPCR software allows the sequence file batch processing that is essential for automation. The program is available for download at http://primerdigital.com/fastpcr.html, and its online version is located at http://primerdigital.com/tools/pcr.html.

The accuracy with which DNA polymerase can replicate a template DNA sequence is an extremely important property that can vary by an order of magnitude from one enzyme to another. The rate of nucleotide misincorporation is shaped by multiple factors, including PCR conditions and proofreading capabilities, and proper assessment of polymerase error rate is essential for a wide range of sensitive PCR-based assays. In this paper, we describe a method for studying polymerase errors with exceptional resolution, which combines unique molecular identifier tagging and high-throughput sequencing. Our protocol is less laborious than commonly-used methods, and is also scalable, robust and accurate. In a series of nine PCR assays, we have measured a range of polymerase accuracies that is in line with previous observations. However, we were also able to comprehensively describe individual errors introduced by each polymerase after either 20 PCR cycles or a linear amplification, revealing specific substitution preferences and the diversity of PCR error frequency profiles. We also demonstrate that the detected high-frequency PCR errors are highly recurrent and that the position in the template sequence and polymerase-specific substitution preferences are among the major factors influencing the observed PCR error rate.

The polymerase chain reaction (PCR) is a laboratory technique used for the amplification of a specific DNA fragment in a simple enzyme reaction. The basic PCR method has been modified to expand its application. Development of quantitative PCR (qPCR) has enabled detection and quantification of the target sequence in real time, while it is being synthesized. Another popular variation is reverse transcription polymerase chain reaction (RT-PCR), a technique used to detect and measure RNA. PCR technology has revolutionized the field of molecular biology and medical research. Because of its widespread use, it is important to understand the scientific principles of PCR. The aim of this chapter is to explain the concepts underlying this method and to explore the clinical usefulness and potential of this technique. The chapter also provides detailed protocols on how to undertake PCR in the laboratory, including techniques for RNA isolation, cDNA synthesis, and data analysis. A scenario in which PCR is utilized to answer a research question is also described, as well as guidance on how to troubleshoot experimental problems.

The reverse transcription-polymerase chain reaction technique has been proven to be a rapid and reliable method for amplifying viroid sequences from infected plants. From 1990, when the first amplification method was applied to apple scar skin viroid, amplification methods have increased in number with the development and application of real-time reverse transcription-polymerase chain reaction, reverse transcription-Loop mediated isothermal amplification, and the combination of different techniques.

The polymerase chain reaction (PCR) is a technology used to exponentially amplify a short, specific DNA region of interest, generating thousands to millions of copies of this specific region, all with a similar sequence and length. It is one of the few techniques that has undoubtedly revolutionized the field of molecular biology and diagnostics. Since the invention of the classical end-point PCR in 1986, the technique has gone through a revolutionary period, with a boost in 1992 due to the invention of real-time or quantitative PCR (qPCR), which allowed for monitoring the PCR reaction in real-time, thereby making the quantification of nucleic acids much more simple, accurate, and sensitive. It is a key technology that is present on almost every bench in a research or diagnostic laboratory. In this chapter we will give an overview of the qPCR technique, starting from its invention, describing the different methodologies and important factors to be taken into account when optimizing and using this widespread nucleic acid-based technique.

a b s t r a c t PCR is a formidable and potent technology that serves as an indispensable tool in a wide range of biological disciplines. However, due to the ease of use and often lack of rigorous standards many PCR applications can lead to highly variable, inaccurate, and ultimately meaningless results. Thus, rigorous method validation must precede its broad adoption to any new application. Multi-template samples possess particular features, which make their PCR analysis prone to artifacts and biases: multiple homologous templates present in copy numbers that vary within several orders of magnitude. Such conditions are a breeding ground for chimeras and heteroduplexes. Differences in template amplification efficiencies and template competition for reaction compounds undermine correct preservation of the original template ratio. In addition, the presence of inhibitors aggravates all of the above-mentioned problems. Inhibitors might also have ambivalent effects on the different templates within the same sample. Yet, no standard approaches exist for monitoring inhibitory effects in multitemplate PCR, which is crucial for establishing compatibility between samples.

Potato early blight and brown spot are important fungal diseases responsible for premature defoliation and yield loss of potato. Pathogens considered to be involved in leaf necrosis are Alternaria solani and A. alternata, respectively. Both diseases are commonly characterized by the visualization of leaf lesions. Current detection and identification methods for Alternaria species rely primarily on cultural and morphological characteristics, the assessment of which is time-consuming and not always suitable. Sensitive, reliable methods for estimating infection severity are therefore desirable. In this study, an Alternaria-specific real-time PCR assay was developed using primers based on internal transcribed spacers (ITS) 1 and 2. The assays facilitated species detection and clearly discriminated between A. solani and A. alternata. The use of real-time PCR allowed quantitative estimation of fungal biomass in plant tissues. Detection sensitivities were in the range of >100 fg. Real-time PCR applications used to accurately assess the extent of colonization by Alternaria spp. during disease development are reported here for the first time. Additionally, Alternaria genomic DNA levels were verified not only in potato leaves showing different levels of disease progress, but also in symptomless leaves. This assay provides a useful tool to quantify pathogen levels during initial latent stages of infection and will thus help in the early detection and quantification of Alternaria spp..

Recombinase polymerase amplification (RPA) is an isothermal method to amplify nucleic acid sequences without the temperature cycling that classical PCR uses. Instead of using heat to denature the DNA duplex, RPA uses recombination enzymes to swap single‐stranded primers into the duplex DNA product; these are then extended using a strand‐displacing polymerase to complete the cycle. Because RPA runs at low temperatures, it never forces the system to recreate base‐pairs following Watson–Crick rules, and therefore it produces undesired products that impede the amplification of the desired product, complicating downstream analysis. Herein, we show that most of these undesired side products can be avoided if the primers contain components of a self‐avoiding molecular recognition system (SAMRS). Given the precision that is necessary in the recombination systems for them to function biologically, it is surprising that they accept SAMRS. SAMRS‐RPA is expected to be a powerful tool within the range of amplification techniques available to scientists., Unlike standard DNA primers that have a large background signal in isothermal amplification reactions, self‐avoiding molecular recognition system (SAMRS) components are modified nucleotides that eliminate these effects when added to primers, which allows for a real‐time fluorescence output. An assay to detect MERS RNA using SAMRS primers was optimized for quick, isothermal amplification.WILEY-VCHThis article is being made freely available through PubMed Central as part of the COVID-19 public health emergency response. It can be used for unrestricted research re-use and analysis in any form or by any means with acknowledgement of the original source, for the duration of the public health emergency.

As larger-scale cloning projects become more prevalent, there is an increasing need for comparisons among high fidelity DNA polymerases used for PCR amplification. All polymerases marketed for PCR applications are tested for fidelity properties (i.e., error rate determination) by vendors, and numerous literature reports have addressed PCR enzyme fidelity. Nonetheless, it is often difficult to make direct comparisons among different enzymes due to numerous methodological and analytical differences from study to study. We have measured the error rates for 6 DNA polymerases commonly used in PCR applications, including 3 polymerases typically used for cloning applications requiring high fidelity. Error rate measurement values reported here were obtained by direct sequencing of cloned PCR products. The strategy employed here allows interrogation of error rate across a very large DNA sequence space, since 94 unique DNA targets were used as templates for PCR cloning. The six enzymes included in the study, Taq polymerase, AccuPrime-Taq High Fidelity, KOD Hot Start, cloned Pfu polymerase, Phusion Hot Start, and Pwo polymerase, we find the lowest error rates with Pfu, Phusion, and Pwo polymerases. Error rates are comparable for these 3 enzymes and are >10x lower than the error rate observed with Taq polymerase. Mutation spectra are reported, with the 3 high fidelity enzymes displaying broadly similar types of mutations. For these enzymes, transition mutations predominate, with little bias observed for type of transition.

Accurate identification of fungal pathogens using a sequence-based approach requires an extraction method that yields template DNA pure enough for polymerase chain reaction (PCR) or other types of amplification. Therefore, the objective of this study was to develop and standardise a rapid, inexpensive DNA extraction protocol applicable to the major fungal phyla, which would yield sufficient template DNA pure enough for PCR and sequencing. A total of 519 clinical and culture collection strains, comprised of both yeast and filamentous fungi, were prepared using our extraction method to determine its applicability for PCR, which targeted the ITS and D1/D2 regions in a single PCR amplicon. All templates were successfully amplified and found to yield the correct strain identification when sequenced. This protocol could be completed in approximately 30 min and utilised a combination of physical and chemical extraction methods but did not require organic solvents nor ethanol precipitation. The method reduces the number of tube manipulations and yielded suitable template DNA for PCR amplification from all phyla that were tested.

The polymerase chain reaction (PCR) has been a reliable and fruitful method for many applications in ecology. Nevertheless, unavoidable technical and instrumental requirements of PCR have limited its widespread application in field situations. The recent development of isothermal DNA amplification methods provides an alternative to PCR, which circumvents key limitations of PCR for direct amplification in the field. Being able to analyze DNA in the pollen cloud of an ecosystem would provide very useful ecological information, yet would require a field-enabled, high-throughput method for this potential to be realized. Here, we demonstrate the applicability of the loop-mediated DNA amplification method (LAMP), an isothermal DNA amplification technique, to be used in pollen analysis. We demonstrate that LAMP can provide a reliable method to identify species from the pollen cloud, and that it can amplify successfully with sensitivity down to single pollen grains, thus opening the possibility of field-based, high-throughput analysis.

PCR inhibitors can originate from a variety of sources and can co-extract with the DNA template, resulting in reduced amplification and/or dropped alleles. Currently real time PCR is used to provide a check for the presence of PCR inhibition by monitoring the quality of amplification of an internal control. In this paper we examine the effect of internal control length and sequences on its sensitivity to PCR inhibition by varying concentrations of commonly encountered PCR inhibitors. Data from both amplification and melt curves were evaluated. The results show that while amplicon sequence has minor effects on amplification efficiency and melt curves, amplicon length has a more dramatic effect, regardless of inhibitor type. Given the increasing variety of STR typing kits and their documented differences in performance with respect to inhibition, the data obtained in this study can be used to assist designers of real time PCR kits to adjust their internal PCR controls (IPC) to permit a more targeted estimation of inhibition.