Search

Biochar and compost application in soil has been proved as an environmental management and soil remediation strategy for upgrading soil quality and growth-promoting soil microorganisms. A detailed examination of the fluctuations and stoichiometric interactions between β-glucosidase (BG), N-acetylglucosaminidase (NAG), leucine aminopeptidase (LAP), and acid phosphatase (AP) after applying biochar and compost to the heavy metal soils was conducted in the paper. However, biochar stimulated the activity of AP and inhibited BG, NAG, and LAP. Compost and biochar-compost might strengthen BG, NAG, LAP, and AP activities. Redundancy analysis discovered that the crucial parameters that affected soil enzyme activity were TN, NO3−-N, and TP. However, the stoichiometric ratio of C/N, C/P, and N/P with the application of the biochar, compost, and biochar-compost could be changed. While alleviating the P-limitation in soils under Cu stress, biochar may also alleviate the C-limitation in soils under As, Cd, and Zn stress. Compost and biochar-compost application alleviated C-limitation in heavy-metal (Cu, As, Cd, and Zn) polluted soil. This work will help us further understand the stoichiometry and energy restrictions of biochar and compost on ecological functional enzymes.

Hydrogen sulfide (H2S), an emerging gas transmitter, has been shown to be involved in multiple intracellular physiological and biochemical processes. In this study, the effects of hydrogen sulfide coupled with calcium on cadmium removal and resistance in Phanerochaete chrysosporium were examined. The results revealed that H2S enhanced the uptake of calcium by P. chrysosporium to resist cadmium stress. The removal and accumulation of cadmium by the mycelium was reduced by H2S and Ca2+ pretreatment. Moreover, oxidative damage and membrane integrity were alleviated by H2S and Ca2+. Corresponding antioxidative enzyme activities and glutathione were also found to positively respond to H2S and Ca2+, which played an important role in the resistance to cadmium-induced oxidative stress. The effects of hydroxylamine (HA; a hydrogen sulfide inhibitor) and ethylene glycol-bis-(2-aminoethylether)-N,N,N′,N′-tetraacetic acid (EGTA; a calcium chelator) toward H2S and Ca2+ and their cross-interactions confirmed the positive roles and the potential crosstalk of H2S and Ca2+ in cadmium stress resistance. These findings imply that the protective effects of H2S in P. chrysosporium under cadmium stress may occur through a reduction in the accumulation of cadmium and promotion of the antioxidant system, and the H2S-regulated pathway may be associated with the intracellular calcium signaling system. Key points • Altered monoterpenoid tolerance mainly related to altered activity of efflux pumps. • Increased tolerance to geranic acid surprisingly caused by decreased export activity. • Reduction of export activity can be beneficial for biotechnological conversions.

Direct production of 5-hydroxymethylfurfural (HMF) through biomass always needs the addition of exogenous catalysts and causes extra costs. Herein, acid mine drainage (AMD), one of the traditional wastewaters, was introduced as a natural catalyst to produce HMF directly from lignocellulosic biomass. Key factors in the biomass conversion were optimized and investigated by the response surface methodology (RSM), and the HMF yield reached 13.51 wt% under optimal conditions. The metal elements and the acidic environment in AMD activated the Fenton reaction to effectively destroy the lignocellulose structure and synergistically promote the formation of HMF. Furthermore, the biomass substrate in the biomass conversion was indirectly modified by the AMD during this process. The biomass conversion residue could be prepared by pyrolysis to obtain a functional metal-loaded carbon material with good adsorption of thiamethoxam (THX), which provides a sustainable solution for the disposal of biomass conversion residue.

To improve the uptake of heavy metals by plants and increase the effectiveness of phytoextraction, chelating agents are employed to change the speciation of heavy metals in soil and increase their bioavailability. However, the effect of a single activator is limited. In recent years, compound activators have been applied widely to improve phytoextraction efficiency. In this study, a fruit peel-based activator (OG) was prepared, containing a mixture of orange peel extracts and tetrasodium glutamate diacetate (GLDA) (1.6% v/v) in a ratio of 1:1 (v/v). The pot experiment was used to investigate the effects of different amounts of OG combined with phosphate-solubilizing bacteria (Acinetobacter pitti, AP) on the extraction of Cd from farmland soil by ryegrass (Lolium perenne L). The results indicated that the addition of OG and AP increased the pH and EC of the soil and improved the content of nutrient elements in the soil. The optimal combination of the application rates of OG and AP improved the growth of ryegrass and enhanced the phytoextraction of Cd. Redundancy analysis (RDA) showed that total soil nitrogen had the greatest influence on phytoextraction, with a contribution rate of 85.3%, followed by pH, with a contribution rate of 7.7%. Total nitrogen, pH, available phosphorus, alkaline nitrogen, and total organic matter were correlated positively with plant Cd, soil Cd decrease ratio, and the bioaccumulation factor but negatively with total Cd and available Cd. Based on the findings of this study, it is feasible to apply the fruit peel-based activator (amended with GLDA) and phosphate-solubilizing bacteria to enhance phytoextraction of Cd, which will provide a valuable reference for the treatment of heavy metal-contaminated soils and the reutilization of fruit peel waste. When applying the compound activator, it is recommended to consider the influence of the additional amount of compound activator on the extraction efficiency.

Imidacloprid (IMI), a typic neonicotinoid insecticide, is widely used and persist in soils with long half-time causing serious threat to ecosystem and human health. It is urgent to develop suitable and effective methods to accelerate it degradation and alleviate its negative impacts in soil. In this study, the introduction of functional microbe white-rot fungus Phanerochaete chrysosporium to remediate IMI contaminated wetland soil was carried out. The remediation performance and the response of the soil microbial community were examined. The results showed that P. chrysosporium could improve the degradation of IMI in soil no matter the soil was sterilized or not. The bioaugmentation was especially observed in non-sterilized soil under the inoculation patterns of FE and SP with the maximum IMI degradation rate of 91% and 93% in 7 days, respectively. The invertase activity in soil was also enhanced with P. chrysosporium inoculation. Microbial community analysis revealed that P. chrysosporium inoculation could increase the diversity and richness of bacterial community, and stimulate some IMI degraders genera including Ochrobactrum, Leifsonia, Achromobacter, and Bacillus. Moreover, the xenobiotic degradation and metabolism pathway was generally enhanced with P. chrysosporium inoculation based on PICRUSt analysis. These obtained results demonstrated that the introduction of white-rot fungus is of great potentially enabling the remediation of neonicotinoids contaminated soil.

Chemokines are important regulators of the immune system, inducing specific cellular responses by binding to receptors on immune cells. In SLE patients, decreased expression of CCL2 on mesenchymal stem cells (MSC) prevents inhibition of B-cell proliferation, causing the characteristic autoimmune phenotype. Nevertheless, the intrinsic role of CCL2 on B-cell autoimmunity is unknown. In this study using Ccl2 KO mice, we found that CCL2 deficiency enhanced BCR signaling by upregulating the phosphorylation of the MST1-mTORC1-STAT1 axis, which led to reduced marginal zone (MZ) B cells and increased germinal center (GC) B cells. The abnormal differentiation of MZ and GC B cells were rescued by in vivo inhibition of mTORC1. Additionally, the inhibition of MST1-mTORC1-STAT1 with specific inhibitors in vitro also rescued the BCR signaling upon antigenic stimulation. The deficiency of CCL2 also enhanced the early activation of B cells including B-cell spreading, clustering and signalosome recruitment by upregulating the DOCK8-WASP-actin axis. Our study has revealed the intrinsic role and underlying molecular mechanism of CCL2 in BCR signaling, B-cell differentiation, and humoral response.

Nanoscale zero-valent iron particles (NZVI) are widely used in a variety of industries owing to their advantageous mechanical, physical, and chemical properties. These particles can be released into environmental media, including water, soil, and air, through several pathways. NZVI in the ecosystem can be taken up, excreted and distributed within organisms, which is harmful to plants, animals and humans. Plants play a significant role as producers in the ecological circle and can both positively and negatively affect the ecological behavior of NZVI. Therefore, understanding the relationship between plants and NZVI is likely to be of great value for the assessment of NZVI-associated risks and future research directions. In this review, we summarize the current knowledge on the uptake, distribution, and accumulation of NZVI in plants; the phytotoxicity triggered by NZVI exposure at the physiological, biochemical, and molecular levels; and the defense mechanism used by plants to defend against NZVI-induced insults. We further discuss the toxic effects of NZVI on soil animals and microorganisms as well as the risk posed by the presence of NZVI in the food chain.

This study examined the effects of biochar, biogas residue, and their combined amendments on CO

In the original published version of the article, the red squares in the figures which indicated the corrections.

As an important chemokine receptor, the role of CX3CR1 has been studied extensively on the migration of lymphocytes including T and B cells. Although CX3CR1+ B cells have immune suppressor properties, little is known about its role on the regulation of BCR signaling and B cell differentiation as well as the underlying molecular mechanism. We have used CX3CR1 KO mice to study the effect of CX3CR1 deficiency on BCR signaling and B cell differentiation. Interestingly, we found that proximal BCR signaling, such as the activation of CD19, BTK and SHIP was reduced in CX3CR1 KO B cells upon antigenic stimulation. However, the activation of mTORC signaling was enhanced. Mechanistically, we found that the reduced BCR signaling in CX3CR1 KO B cells was due to reduced BCR clustering, which is caused by the enhanced actin accumulation by the plasma membrane via increased activation of WASP. This caused an increased differentiation of MZ B cells in CX3CR1 KO mice and an enhanced generation of plasma cells (PC) and antibodies. Our study shows that CX3CR1 regulates BCR signaling via actin remodeling and affects B cell differentiation and the humoral immune response.

Carbon (C), nitrogen (N), phosphorus (P), and sulfur (S) cycling functional genes and bacterial and fungal communities during composting with biochar and biogas residue amendments were studied. Correlations between microbial community structure, functional genes and physicochemical properties were investigated by network analysis and redundancy analysis. It was shown that the gene of acsA abundance accounted for about 50% of the C-related genes. Biogas residue significantly decreased the abundance of denitrification gene nirK. Biogas residues can better promote the diversity of bacteria and fungi during composting. Biochar significantly increased the abundance of Humicola. Redundancy analysis indicated that pile temperature, pH, EC were the main physicochemical factors affecting the microbial community. WSC and NO

With the rapid depletion of fossil energy and increasingly severe environmental pollution, the development of biomass resources for biorefineries has become a new research focus. However, heavy metals may be released during the thermochemical treatment when the biomass materials used in biomass conversion are contaminated by heavy metals. This can cause secondary environmental pollution or transference to the target products, reducing product quality. Therefore, having a systematic understanding of the fate of heavy metals in biomass conversion is necessary for alleviating potential risks. This study presents the current status of contaminated biomass and conversion products involving thermochemical processes, the migration, transformation, and impact of heavy metals in biomass conversion was investigated, and the utilization of heavy metals in contaminated biomass was briefly outlined. This review aims to link biomass conversion to the fate of heavy metals, avoid existing risks as much as possible to produce cleaner products efficiently, and promote the sustainable development of heavy metal contaminated biomass resources.

Sanguinarine has strong inhibitory effects against the cyanobacterium Microcystis aeruginosa. However, previous studies were mainly limited to laboratory tests. The efficacy of sanguinarine for mitigation of cyanobacterial blooms under field conditions, and its effects on aquatic microbial community structure remain unknown. To elucidate these issues, we carried out in situ cyanobacterial bloom mitigation tests. Our results showed that sanguinarine decreased population densities of the harmful cyanobacteria Microcystis and Anabaena. The inhibitory effects of sanguinarine on these cyanobacteria lasted 17 days, after which the harmful cyanobacteria recovered and again became the dominant species. Concentrations of microcystins in the sanguinarine treatments were lower than those of the untreated control except during the early stage of the field test. The results of community DNA pyrosequencing showed that sanguinarine decreased the relative abundance of the prokaryotic microorganisms Cyanobacteria, Actinobacteria, Planctomycetes and eukaryotic microorganisms of Cryptophyta, but increased the abundance of the prokaryotic phylum Proteobacteria and eukaryotic microorganisms within Ciliophora and Choanozoa. The shifting of prokaryotic microbial community in water column was directly related to the toxicity of sanguinarine, whereas eukaryotic microbial community structure was influenced by factors other than direct toxicity. Harmful cyanobacteria mitigation efficacy and microbial ecological effects of sanguinarine presented in this study will inform the broad application of sanguinarine in cyanobacteria mitigation.

Oil adsorption sponges have attracted great attention in the field of oil-water mixture treatment, due to their low cost, high porosity, flexible design, and three dimensional skeleton structures. However, the hydrophilic-oleophilic of commercial sponge limits its application for oil-water treatment. To improve the adsorption performance and simplify the oil recovery process, various modification methods have been studied recently. Herein, we discuss the fabrication of hydrophobic/oleophilic sponges and summarize the recently reported modify materials onto sponges. Furthermore, some additional material properties are also presented, which make sponges superior capacity for addressing oil spills under extreme conditions. In addition, some oil collecting devices based on sponges, which are used to facilitate the oil collecting processes, are also shown. Meanwhile, the outlooks and challenges are also offered for future applications of sponges in the remediation of oil spill.

Heavy metal contamination of soil has become a serious global issue because of their persistence in the environment and the non-biodegradable nature leading to their accumulation to toxic levels. In order to achieve early warning and prevent soil quality from deteriorating, it is necessary to select suitable indices to diagnose heavy metal pollution. Microbiological indices for monitoring soil pollution by heavy metals are gaining attention. However, the related researches are scattered, and critical review is imperative. This review is mainly to provide readers with an in-depth understanding of the merits and limitations of microbiological indices for heavy metals contaminated and remediated soils. Microbiological indicators include microbial abundance, community diversity and structure, functional activity. The changes of different microbiological indices and the mechanism of microbial response to heavy metal stress in soils are comprehensively summarized. Furthermore, research gaps and future directions of the microbial ecotoxicological diagnosis of soil contamination by heavy metals are also proposed and discussed.

Chitosan-stabilized FeS magnetic (MC-FeS) composites were successfully prepared to address the easily oxidization of FeS and enhance Cr(VI) removal from water. Results showed that the MC-FeS composites enhanced the Cr(VI) removal capacity as compared to bare FeS. Further investigation using X-ray photoelectron spectroscopy showed that FeOOH, S8, Cr2O3, Cr2S3, and a Fe(III)-Cr(III) complex were apparently introduced by Cr(VI), Fe(II), and S(−II), respectively. The sorption kinetics could be interpreted using a pseudo-second-order kinetic model, whereas the isotherms were simulated using the Redlich‒Peterson isotherm model indicating Cr(VI) removal by MC-FeS composites was a hybrid chemical reaction‒sorption process. In addition, the MC-FeS composite presented high stability against aging and performed well in a long-term reaction system and typical natural water environment. The effective performance of MC-FeS composites shows their great potential in wastewater remediation contaminated by heavy metals.

In this study, magnetic graphene oxide modified zeolite (Cu-Z-GO-M) composites with two different ratios of GO to zeolite (named Cu-Z-GO-M 1:2 and Cu-Z-GO-M 1:1) were synthesized by solid-state dispersion (SSD) method. The properties of zeolite-based composites were characterized by SEM, XRD, FTIR, XPS, and magnetization curves. In order to understand the pollutant removal performance of the as-prepared composites, methylene blue (MB) was used as the target pollutant in adsorption experiments. The removal efficiency of MB onto Cu-Z-GO-M composite was enhanced obviously with pH > 9. The adsorption capacities of MB onto Cu-Z-GO-M 1:1 were 82.147, 89.315, 97.346 mg/g at 298, 308, and 318 K, respectively. The removal ability of MB increased with the increase of GO content in modified composites. The adsorption behavior can be well described using a pseudo-second-order kinetic and Freundlich isotherm model. The thermodynamic analysis indicated the MB adsorption by Cu-Z-GO-M was a spontaneous and endothermic reaction. The results showed that the prepared Cu-Z-GO-M composite could be a promising adsorbent with good adsorption capacity and reusability for MB removal from wastewater.

Oil spills result in severe environmental pollution and inflict serious ecological damage, which makes the development of facile, low-cost, high-capacity, and sustainable oil absorbents to be a task of high practical significance. In this study, a kaolin-modified hydrophobic melamine sponge (K-MS) was prepared via simple soaking method, which can be applied to clean up oil spills and organic solvents leaks. The properties of the K-MS were characterized by a range of instrumental techniques. The addition of fluorizated kaolin not only endowed commercially available melamine sponge hydrophobic properties and enhanced its adsorption capacity to various oils and organic solvents. The K-MS exhibited the high adsorption capacity (up to 87–194 g/g) and excellent recyclability (>90%). The equilibrium adsorption time was fast within 1 s for diesel. Moreover, the as-prepared sponge adsorption performance was examined in harsh environment, which has remarkable chemical stability and compressive properties. Thus, this study presents a low-cost facile strategy to produce promising absorbent for large-scale oil and organic solvents cleanups and recovery. Furthermore, this approach can be extended to a series of clay minerals in rich source, thus could open up new prospects for design hydrophobic materials to address oil pollution.

In this work, the immobilization of silver nanoparticles on lignosulfonate functionalized kaolin composite (LS-kaolin-Ag) was fabricated by a facile reduction method without additional reductant and stabilizer. Transmission electron microscopy, X-ray powder diffraction, and X-ray photoelectron spectroscopy, and Fourier transform infrared spectroscopy (FTIR) were used to confirm the successful preparation of LS-kaolin-Ag composite. The catalytic reduction tests on both cationic dye rhodamine B and anionic dye Congo red indicated the high catalytic activities of this as-prepared LS-kaolin-Ag composite. Meanwhile, this catalyst showed good recyclability for dye decolorization with just a little decrease of conversion percent in five successive reactions. These results suggest that LS-kaolin-Ag composite as an efficient and cost-effective catalyst shows great application potential for the decolorization of various organic dyes.

Microcystis aeruginosa has several morphological and physiological traits that frequently enable it to dominate in eutrophic waters. Sanguinarine is a promising algaecide of biological origin that ...

To explore the approach for further enhancing the dye removal performance of polydopamine (PDA) coated materials, a novel composite of PDA-kaolin with reduced graphene oxide hybridization (PDA-rGO-kaolin) was synthesized and selected as a model adsorbent for methylene blue (MB) removal. The BET characteristic analysis showed that the introduction of rGO significantly increased the surface area of PDA-kaolin by 3.1 times. A series of comparative experiments on PDA-kaolin and PDA-rGO-kaolin towards MB removal in various conditions were carried out. Adsorption experiment indicated that PDA-rGO-kaolin was more satisfactory for MB removal. Kinetic analysis showed that the adsorption followed a pseudo-second-order kinetic model. The adsorption behavior could be better described by Langmuir isotherm model. Compared with PDA-kaolin, PDA-rGO-kaolin showed higher maximum adsorption capacity towards MB (39.663 mg/g). Furthermore, the adsorption of MB molecules on adsorbents was spontaneous and endothermic process according to thermodynamic experiment. Moreover, PDA-rGO-kaolin showed a good regeneration performance for MB removal. These results show that the introduction of graphene is a feasible and efficient method to improve the adsorption performance of PDA coated kaolin composite.

Microcystis aeruginosa frequently forms cyanobacterial blooms in eutrophic water bodies, resulting in high concentrations of extracellular polymeric substances (EPS) in the water column. The effects of M. aeruginosa EPS (MA-EPS) on the adsorption behavior of Cu(II) onto kaolinite and the possible mechanisms were investigated in this study. The results of potentiometric titration and Fourier transform infrared (FT-IR) spectroscopy determination show that carboxyl, phosphoryl and amino/hydroxyl groups were the main adsorption groups on MA-EPS. The combination of EPS with kaolinite created new adsorption sites. MA-EPS increased the adsorption of Cu(II) by kaolinite mainly through complexation. The adsorption kinetics of Cu(II) by kaolinite or kaolinite + EPS composite (Kao + EPS) was well fitted by a pseudo-second order kinetic model. The adsorption isotherm analyses show that the incorporation of MA-EPS onto kaolinite increased its surface heterogeneity. Rather than intercalating into the kaolinite interlayers, MA-EPS and/or Cu(II) were adsorbed onto the surface of this clay.

Sixteen treatments of soil contaminated by Cu, Pb, and Zn by the addition of a different percentage of biochar and compost were incubated for 120 days. The abundance of denitrifying genes such as narG, nirK, nirS and nosZ and the ammonia-oxidizing amoA genes of ammonia-oxidizing archaea/bacteria (AOA/AOB), soil nitrite reductase activity (S-NiR) and their shaping factors were also determined. The relationships between functional genes, S-NiR, and physico-chemical parameters were analyzed using the Pearson correlation method. The study found that the changes in physico-chemical parameters, including water-soluble organic carbon (WSC), nitrate (NO3−) and ammonium (NH4+), were predominant in different treatments. The abundance of nirK and narG genes is most sensitive to the changes in the properties of the soil sample. Bacterial 16S rDNA gene abundance was significantly affected by NO3− and S-NiR (P

In recent years, 2, 5-furandicarboxylic acid (FDCA) has attracted much attention as the precursor of bio-polyester materials. A coupled process of ultrasonic-assisted dilute acid pretreatment and MnO2 was designed in this study to directly produce FDCA from lignocellulosic biomass, which is different from the traditional preparation process. Moreover, the critical parameters in the process were analyzed and optimized by the response surface method. The yield of FDCA could reach 52.1% under the optimal conditions. The reaction mechanism indicated that heavy metal elements in lignocellulosic biomass could play the role of the Lewis acid catalyst to promote the formation of FDCA to a certain extent. With the increase of temperature, the heavy metals transfer in biomass from the solid phase to the liquid phase increased, but most of them remain in the former. Therefore, further purification and treatment measures are worthy of attention.