Search

Food authentication is a growing concern with rising complexities of the food supply network, with fish being an easy target of food fraud. In this regard, NIR spectroscopy has been used as an efficient tool for food authentication. This article reviews the latest research advances on NIR based fish authentication. The process from sampling/sample preparation to data analysis has been covered. Special attention was given to NIR spectra pre-processing and its unsupervised and supervised analysis. Sampling is an important aspect of traceability study and samples chosen ought to be a true representative of the population. NIR spectra acquired is often laden with overlapping bands, scattering and highly multicollinear. It needs adequate pre-processing to remove all undesirable features. The pre-processing technique can make or break a model and thus need a trial-and-error approach to find the best fit. As for spectral analysis and modelling, multicollinear nature of NIR spectra demands unsupervised analysis (PCA) to compact the features before application of supervised multivariate techniques such as LDA, PLS-DA, QDA etc. Machine learning approach of modelling has shown promising result in food authentication modelling and negates the need for unsupervised analysis before modelling.

Mars exploration will foresee the design of bioregenerative life support systems (BLSSs), in which the use/recycle of in situ resources might allow the production of food crops. However, cultivation on the poorly-fertile Mars regolith will be very challenging. To pursue this goal, we grew potato (Solanum tuberosum L.) plants on the MMS-1 Mojave Mars regolith simulant, pure (R100) and mixed with green compost at 30% (R70C30), in a pot in a cold glasshouse with fertigation. For comparison purposes, we also grew plants on a fluvial sand, pure (S100) and amended with 30% of compost (S70C30), a volcanic soil (VS) and a red soil (RS). We studied the fertility dynamics in the substrates over time and the tuber nutritional quality. We investigated nutrient bioavailability and fertility indicators in the substrates and the quality of potato tubers. Plants completed the life cycle on R100 and produced scarce but nutritious tubers, despite many critical simulant properties. The compost supply enhanced the MMS-1 chemical/physical fertility and determined a higher tuber yield of better nutritional quality. This study demonstrated that a compost-amended Mars simulant could be a proper substrate to produce food crops in BLSSs, enabling it to provide similar ecosystem services of the studied terrestrial soils.

Bioregenerative life support systems (BLSS) are conceived of and developed so as to provide food sources for crewed missions to the Moon or Mars. The in situ resource utilization (ISRU) approach aims to reduce terrestrial input into a BLSS by using native regoliths and recycled organic waste as primary resources. The combination of BLSS and ISRU may allow sustainable food production on Moon and Mars. This task poses several challenges, including the effects of partial gravity, the limited availability of oxygen and water, and the self-sustaining management of resources. Lunar and Martian regoliths are not available on Earth; therefore, space research studies are conducted on regolith simulants that replicate the physicochemical properties of extra-terrestrial regoliths (as assessed in situ by previous missions). This review provides an overview of the physicochemical properties and mineralogical composition of commercially available Lunar and Martian regolith simulants. Subsequently, it describes potential strategies and sustainable practices for creating regolith simulants akin to terrestrial soil, which is a highly dynamic environment where microbiota and humified organic matter interact with the mineral moiety. These strategies include the amendment of simulants with composted organic wastes, which can turn nutrient-poor and alkaline crushed rocks into efficient life-sustaining substrates equipped with enhanced physical, hydraulic, and chemical properties. In this regard, we provide a comprehensive analysis of recent scientific works focusing on the exploitation of regolith simulant-based substrates as plant growth media. The literature discussion helps identify the main critical aspects and future challenges related to sustainable space farming by the in situ use and enhancement of Lunar and Martian resources.

Higher plants will play a key role in human survival in Space, being able to regenerate resources and produce fresh food. However, the creation of a fertile substrate based on extra-terrestrial soils is still a challenge for space cultivation. We evaluated the adaptability of soybean (Glycine max (L.) Merr.) cultivar ‘Pr91M10′ to three substrates, the Mojave Mars regolith Simulant MMS-1, alone (R100), and in a mixture with blond sphagnum peat at two different volumes, 85:15 (R85P15) and 70:30 (R70P30), in plants directly sown on the substrates or transplanted after sowing on peat. The low pH of peat (4.34) allowed the mitigation of the alkalinity of the Mars regolith simulant (pH 8.86), lowering the initial pH to neutral (6.98, R85P15), or subacid to neutral (6.33, R70P30) values. Seed germination reached the highest percentage in the shortest time in the mixture of regolith simulant with 15% of peat. The cultivation substrate did not affect the plant growth and nutritional status. However, a significant interaction between the substrate and planting method was found in several growth parameters, with the highest positive effects observed in plants resulting from direct sowing on the regolith mixture with peat.

This work aimed to study the effects of compost (applied at two rates) and two commercial microbial biostimulants on the mobility and bioavailability of potentially toxic elements (PTEs) in an industrial soil phytostabilized by Dactylis glomerata L. or a mixed stand of grasses (Lolium perenne L., Poa pratensis L. and Festuca arundinacea Shreb.). The soil showed very high pseudototal and bioavailable concentrations of cadmium (Cd) and lead (Pb), due to improper lead-acid batteries storage. Compost amendment in combination with the two biostimulants produced the best outcomes in terms of plant growth and nutrient uptake. The same mix of beneficial microbes improved soil biological fertility enhancing soil nitrogen fixing and ammonia oxidizing bacteria, while reduced the pore water and NH4NO3 extractable concentrations of Cd and at lower extent of Pb in soil. Accordingly, the lower mobility and bioavailability of Cd in soil determined a lower uptake and accumulation of Cd in shoots of different grass species. Our results suggest that a green cap with turfgrass assisted by biostimulants and compost amendment in PTE-contaminated industrial sites could be a reliable and effective practice to protect and restore soil biological fertility and to reduce the risk of PTE dispersion in the surrounding environment.

For the assessment of the environmental and sanitary risks deriving from contamination of agricultural soils, it is crucial to identify and characterize the contaminants and study the soil chemical properties influencing their mobility and bioavailability. This information is essential for the selection of the best site remediation and securing strategy. The study site of this work is agricultural land of 6 ha in the province of Naples (Italy) subject to the past illegal burial of industrial wastes, principally from tanneries. With the aim of identifying the contaminants and assessing their mobility and bioavailability, the soil of the site was characterized for the main chemical and physical properties and for the concentration of potentially toxic elements and hydrocarbons. The readily and potentially bioavailable fractions of the main metal contaminants and their distribution in the soil geochemical fractions were determined by extraction in 1 M of NH4NO3, 0.05 M of ethylenediaminetetraacetic acid (EDTA) pH 7, and European Community Bureau of Reference (EU-BCR) sequential fractionation. Further, the speciation of heavy hydrocarbons and chromium was carried out. The agricultural soil was widely contaminated by chromium, zinc, and heavy hydrocarbons (up to 4487, 1846, and 1800 mg/kg, respectively). In some sub-areas, contaminations by cadmium, lead, and copper (up to 283, 417, and 1183 mg/kg, respectively) were also observed. The chromium was found to be scarcely mobile and bioavailable and was mainly associated with the oxidizable, residual, and reducible fractions of the soil (on average 56%, 25%, and 19% of the total, respectively). However, chromium speciation revealed the presence of a significant amount of highly toxic Cr(VI) (above the legal threshold of 2 mg/kg), despite the low oxidizing power of the soil. Zinc was more mobile and bioavailable than chromium and was mainly distributed among the acetic acid-extractable and reducible fractions of the soil (on average 28% and 47% of the total, respectively). Cadmium was found to be very mobile and bioavailable, and was mainly distributed in the acetic acid-extractable and reducible fractions of the soil (on average 40% and 45% of the total). The speciation of heavy hydrocarbons showed that they consist almost entirely of long-chain aliphatic hydrocarbons, considered not very toxic and immobile. These results suggest that the use of not-edible plant coverage might be the best securing and remediation action for the study site, with the potential to preserve the soil ecosystem services, contain the risk of soil erosion and particle dispersion, and phytoextract the bioavailable metals.

In agricultural soils, thallium (Tl) of geogenic origin may represent a potential risk for human health, mainly via ingestion of food crops. In this work, a pot experiment was carried out to evaluate (1) the bioavailability of Tl and other potentially toxic elements (PTEs) in an agricultural soil with naturally occurring Tl; (2) the uptake and accumulation of PTEs in Lactuca sativa L. var. acephala, Diplotaxis tenuifolia L. DC and Silene latifolia Poir; (3) the health risks arising from plant and soil ingestion by different subpopulations and dermal contact of soil by farmers. In soil, only Tl and Pb pseudototal contents were above Italian screening values. Nevertheless, the promptly bioavailable contents of all PTEs were always below internationally recognized trigger values. Plants affected PTE bioavailability in soil by their rhizodepositions and accumulated PTEs in their shoots. Acceptable risks (hazard index < 1) arose from dietary intake of both L. sativa L., D. tenuifolia L. and dermal contact of soil by farmers. Significant health risks can derive from the intake of S. latifolia Poir. (accumulating high Tl concentrations), in particular by children (HI = 74). In conclusion, an adequate management and crop selection are needed to profitably exploit soils with geogenic Tl for agricultural purposes.

The need for cost-effective adsorbents of inorganic arsenic (As(III) and As(V)) stimulates the academia to synthesize and test novel materials that can be profitably applied at large-scale in most affected areas worldwide. In this study, four different layered double hydroxides (Cu-Al-, Mg-Al-, Mg-Fe- and Zn-Al-LDH), previously synthesized and studied for As(III) removal capacity, were evaluated as potential adsorbents of As(V) from contaminated systems, in absence or presence of common inorganic anions (Cl−, F−, SO42−, HCO3− and H2PO4−). The As(V) desorption by H2PO4− was also assessed. Lastly, the As(V) adsorption capacities of the four layered double hydroxides (LDHs) were compared with those observed with As(III) in a complementary paper. All the LDHs adsorbed higher amounts of As(V) than As(III). Fe-Mg-LDH and Cu-Al-LDH showed higher adsorption capacities in comparison to Mg-Al-LDH and Zn-Al-LDH. The presence of competing anions inhibited the adsorption of two toxic anions according to the sequence: Cl− < F− < SO42− < HCO3− < < H2PO4−, in particular on Mg-Al-LDH and Zn-Al-LDH. The kinetics of As(V) desorption by H2PO4− indicated a higher occurrence of more easily desorbable As(V) on Zn-Al-LDH vs. Cu-Al-LDH. In conclusion, synthetic Cu- and Fe-based LDHs can be good candidates for an efficient removal of inorganic As, however, further studies are necessary to prove their real feasibility and safety.